Skip to content

Strength of Acids and Bases: Hydrides, Oxoacids, Aqua Ions and Lewis Acids

CSIR NET chemistry: hydride acidity trends, Pauling's rules for oxoacids, aqua-ion hydrolysis, BX3 Lewis acidity, steric strain and amine basicity.

  • 18 min read
  • Updated
On this page · 15 sections
  1. Prerequisites
  2. The Hook: Why Is H₃PO₃ Only Diprotic?
  3. Three Families of Brønsted Acid
  4. Binary Hydrides
  5. Oxoacids: Pauling’s Rules
  6. Aqua Acids: Hydrolysis of Metal Ions
  7. Lewis Acid Strength
  8. Base Strength: Amines and Steric Strain
  9. Memory Tricks
  10. Don’t Confuse
  11. Common Mistakes
  12. Practice
  13. Quick Revision Table
  14. Key Takeaways
  15. What’s Next

Prerequisites

The Hook: Why Is H₃PO₃ Only Diprotic?

Three Families of Brønsted Acid

Brønsted acids in inorganic chemistry fall into three groups according to what the acidic proton is attached to:

FamilyProton onExampleMain factor
Binary hydride (hydracid)the central element EHF, H₂S, NH₄⁺E–H bond strength; electronegativity of E
Oxoacidan oxygen bound to EH₂SO₄, HClO₄, H₃PO₄number of terminal (=O) oxygens
Aqua acida water ligand on a metal ion[Fe(H₂O)₆]³⁺charge and size of the metal ion

These are steps on one ladder: as the oxidation state of the central atom rises, an aqua acid loses protons to become a hydroxo acid and then an oxoacid (see “From aqua to oxo” below).

Binary Hydrides

Across a period: electronegativity wins

$$\text{CH}_4 < \text{NH}_3 < \text{H}_2\text{O} < \text{HF} \qquad (\text{acidity in water})$$

The E–H bonds are of similar length along a period, so the dominant factor is the electronegativity of E: the more electronegative E, the more stable the negative charge on the conjugate base E⁻ and the more polar the E–H bond. CH₄ and NH₃ are essentially not acids in water (NH₃ acts as an acid only towards very strong bases such as the hydride ion or alkyl-lithium reagents).

Down a group: bond strength wins

$$\text{HF} \ll \text{HCl} < \text{HBr} < \text{HI} \qquad \text{H}_2\text{O} < \text{H}_2\text{S} < \text{H}_2\text{Se} < \text{H}_2\text{Te}$$

Down a group electronegativity falls, which on its own would make the acids weaker. The opposite is observed, because the E–H bond becomes longer and much weaker (about 570, 432, 366 and 298 kJ mol⁻¹ for HF, HCl, HBr, HI), and the large conjugate base spreads its charge over a bigger volume.

Basicity of hydrides

The trends reverse for the conjugate bases and for neutral hydrides acting as bases:

$$\text{NH}_3 > \text{PH}_3 > \text{AsH}_3 > \text{SbH}_3 \qquad (\text{basicity})$$

The nitrogen lone pair sits in an orbital of substantial s–p hybrid character on a small atom; the lone pair of PH₃ and heavier hydrides is in a diffuse, largely s-type orbital (bond angles near 90°, see Bond Angles and Bent’s Rule), which is a poorer proton acceptor. PH₄⁺ salts exist (PH₄I) but are hydrolysed by water.

Oxoacids: Pauling’s Rules

Write an oxoacid as \( \text{EO}_p(\text{OH})_q \): p oxygens are terminal (not protonated), q are OH groups. Pauling’s two empirical rules:

$$\boxed{\text{Rule 1:}\quad \text{p}K_{a1} \approx 8 - 5p}$$$$\boxed{\text{Rule 2:}\quad \text{successive } \text{p}K_a \text{ values increase by about 5}}$$
pPredicted pKa₁Class
0about 8very weak
1about 3weak
2about −2strong
3about −7very strong

Why the terminal oxygens matter: each E=O (more exactly, E⁺–O⁻) group withdraws electron density from the O–H bonds by induction, and spreads the negative charge of the anion over more oxygens by resonance. Each extra terminal oxygen stabilises the conjugate base by a roughly constant amount.

Why successive pKa values rise by 5: each proton must leave an anion that already carries more negative charge.

Predicted versus observed

AcidFormula as \( \text{EO}_p(\text{OH})_q \)pPredicted pKa₁Observed pKa₁ (approx.)
HOClCl(OH)087.5
H₃AsO₃As(OH)₃089.2
HNO₂NO(OH)133.3
HClO₂ClO(OH)132.0
H₃PO₄PO(OH)₃132.1
H₃AsO₄AsO(OH)₃132.2
H₂SO₃SO(OH)₂131.9
H₅IO₆IO(OH)₅133.3
HNO₃NO₂(OH)2−2−1.4
H₂SO₄SO₂(OH)₂2−2about −3
HClO₃ClO₂(OH)2−2about −1
HClO₄ClO₃(OH)3−7about −10

For H₃PO₄ the rules predict 3, 8, 13; the observed values are about 2.1, 7.2 and 12.4. The agreement (within about one unit) is why the rule is worth learning.

Using the rule backwards: structures from pKa

AcidObserved pKa₁p impliedStructureIonisable H
H₃PO₃ (phosphorous)between 1 and 21HPO(OH)₂, one P–H2 (diprotic)
H₃PO₂ (hypophosphorous)between 1 and 21H₂PO(OH), two P–H1 (monoprotic)
H₃AsO₃ (arsenous)9.20As(OH)₃weak, all on O

If H₃PO₃ were P(OH)₃ (p = 0), its pKa₁ would be near 8; the observed value fits HPO(OH)₂. Hydrogens bonded directly to P are not acidic, so H₃PO₃ is dibasic and H₃PO₂ monobasic. Both are good reducing agents because of their P–H bonds.

The two classic exceptions

  1. Same structure, different central atom: for E(OH), acidity rises with the electronegativity of E:
$$\text{HOCl } (\approx 7.5) > \text{HOBr } (\approx 8.6) > \text{HOI } (\approx 10.6) \qquad (\text{acidity; pKa in brackets})$$
  1. Same element, more oxygens: HOCl < HClO₂ < HClO₃ < HClO₄. This is Pauling’s rule 1 again (p = 0, 1, 2, 3).
  2. Higher oxidation state of the central atom: H₂SO₃ < H₂SO₄; HNO₂ < HNO₃.

Aqua Acids: Hydrolysis of Metal Ions

A metal ion in water is a Lewis acid that binds water molecules. The coordinated water is polarised by the cation, and one of its protons can be lost:

$$[\text{M(H}_2\text{O)}_6]^{z+} + \text{H}_2\text{O} \rightleftharpoons [\text{M(H}_2\text{O)}_5(\text{OH})]^{(z-1)+} + \text{H}_3\text{O}^+$$

This is hydrolysis of the metal ion, and it is why solutions of FeCl₃, AlCl₃ and Cr³⁺ salts are acidic.

What controls the acidity

The acidity increases with the charge density of the cation, measured roughly by \( z^2/r \) (or \( z/r \)):

Aqua ionzTypical pKa (approx.)Comment
[Na(H₂O)ₙ]⁺+1about 14essentially neutral
[Mg(H₂O)₆]²⁺+2about 11.4very weak acid
[Fe(H₂O)₆]²⁺+2about 9.5weak
[Al(H₂O)₆]³⁺+3about 5as acidic as acetic acid
[Fe(H₂O)₆]³⁺+3about 2.2comparable to the first step of H₃PO₄

Three working rules:

  1. Higher charge, more acidic: Fe³⁺ ≫ Fe²⁺; Al³⁺ ≫ Mg²⁺ ≫ Na⁺.
  2. Smaller ion of the same charge, more acidic: Be²⁺ is more acidic than Mg²⁺, which is more acidic than Ba²⁺.
  3. Covalent (soft, polarising) cations are more acidic than \( z^2/r \) predicts: Hg²⁺ and Sn²⁺ hydrolyse more than their size and charge suggest, because their M–O bonds have more covalent character. This links to Fajans’ rules.

Successive deprotonation, especially for M³⁺ and M⁴⁺, leads to OH-bridged polycations and eventually to the precipitation of the hydroxide or hydrous oxide (Fe(OH)₃, Al(OH)₃) as the pH rises.

From aqua to oxo

As the oxidation state of the central atom rises, the stable form in water loses more protons:

Oxidation stateTypical formExample
low (+1, +2, +3)aqua ion[Fe(H₂O)₆]³⁺, [Cr(H₂O)₆]³⁺
intermediate (+4)hydroxo or oxo-aqua species[VO(H₂O)₅]²⁺ (vanadyl, V(IV))
high (+5 to +8)oxoanion or oxoacidVO₄³⁻, CrO₄²⁻, MnO₄⁻, OsO₄

The same element can therefore give a basic oxide in a low oxidation state and an acidic oxide in a high one (CrO, Cr₂O₃, CrO₃ in the Lux–Flood table).

Lewis Acid Strength

The boron trihalides

Towards a reference base such as NH₃ or pyridine, the Lewis acidity order is

$$\text{BF}_3 < \text{BCl}_3 < \text{BBr}_3 < \text{BI}_3$$

This is the reverse of what electronegativity alone predicts: fluorine should make boron the most electron-poor. Two effects explain it:

  1. π back-donation: filled p orbitals on the halogen donate into the empty boron 2p orbital. The B 2p–F 2p overlap is the best (similar size and energy), so BF₃ has the most π stabilisation in its planar form.
  2. Reorganisation energy: to accept a base, BX₃ must pyramidalise from trigonal planar to tetrahedral, which destroys the π bonding. BF₃ loses the most, so it pays the highest price and forms the weakest adducts.

Supporting evidence: the B–F bonds in BF₃ are shorter than expected for a single bond, and they lengthen on adduct formation.

Other factors in Lewis acidity

FactorEffectExample
Positive charge and small sizestronger acidAl³⁺ > Mg²⁺ > Na⁺
Electronegative substituents (σ-only)stronger acidB(C₆F₅)₃ stronger than B(C₆H₅)₃
π back-donation from substituentsweaker acidBF₃ weakest of BX₃; B(OR)₃ and B(NR₂)₃ very weak
Steric bulk round the acceptorweaker acid (adduct strained)B(mesityl)₃ forms few adducts
Expanded coordination possibleacid even with full octetSiF₄, SnCl₄, PF₅, SbF₅

Base Strength: Amines and Steric Strain

Methylamines in water and in the gas phase

The inductive (+I) effect of methyl groups pushes electron density onto nitrogen, so basicity should rise steadily with substitution. In the gas phase, with no solvent, it does:

$$\text{Gas phase:}\quad \text{Me}_3\text{N} > \text{Me}_2\text{NH} > \text{MeNH}_2 > \text{NH}_3$$

In water the order is irregular:

$$\text{Water:}\quad \text{Me}_2\text{NH}\ (10.73) > \text{MeNH}_2\ (10.64) > \text{Me}_3\text{N}\ (9.80) > \text{NH}_3\ (9.25) \qquad (\text{p}K_a \text{ of conjugate acids})$$

The protonated amines R₃NH⁺ are stabilised by hydrogen bonding to water through their N–H protons. NH₄⁺ has four such protons and Me₃NH⁺ only one, so solvation favours the less substituted ions. The balance of inductive effect (favouring Me₃N) and solvation (favouring NH₃) puts Me₂NH on top and Me₃N below MeNH₂.

Steric strain (H. C. Brown)

Towards the proton, which is tiny, steric effects hardly matter. Towards a bulky Lewis acid such as B(CH₃)₃, they do:

  • F-strain (front strain): clash between groups on the base and groups on the acid at the new bond. 2,6-dimethylpyridine (2,6-lutidine) is a stronger base than pyridine towards H⁺ (inductive effect of two methyls), but forms a much weaker adduct with B(CH₃)₃, because the 2- and 6-methyl groups collide with the boron methyls.
  • B-strain (back strain): strain among the groups on the base itself. Bulky groups on nitrogen spread out to relieve crowding; forming an adduct pushes the nitrogen towards tetrahedral and squeezes them together again, which weakens the base.
  • Tied-back alkyl groups: quinuclidine, in which the three “ethyl” arms are tied back into a cage, binds B(CH₃)₃ much more strongly than Et₃N does, because the flexible ethyl groups of Et₃N get in the way of the acid. Textbooks file this example under different strain labels; learn the comparison itself.

So base-strength orders also depend on the reference acid, just as acid-strength orders depend on the reference base.

Other basicity factors

BasepKa of conjugate acid (approx.)Reason
NH₃9.25sp³ lone pair
Pyridine5.2sp² lone pair (more s character, held more tightly)
Aniline4.6lone pair delocalised into the ring
Me₂NH10.73inductive effect, good solvation

Memory Tricks

Don’t Confuse

ThisvsThat
HF < HCl < HBr < HI (acidity, bond strength rules)F > Cl > Br > I (electronegativity)
HOCl > HOBr > HOI (acidity, electronegativity rules)HCl < HBr < HI (hydracid acidity)
H₃PO₃: dibasic, HPO(OH)₂H₃PO₂: monobasic, H₂PO(OH)
B(OH)₃: Lewis acid, pKa about 9.2Si(OH)₄: weak Brønsted acid
Gas phase: Me₃N strongestwater: Me₂NH strongest
2,6-lutidine: stronger base to H⁺ than pyridineweaker base to B(CH₃)₃ (F-strain)

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Using Pauling’s rule, estimate pKa₁ of HClO₃.
  2. How many ionisable protons does H₃PO₂ have?
  3. Which is the stronger Lewis acid towards NH₃: BF₃ or BBr₃?
Answers
  1. ClO₂(OH): p = 2, so pKa₁ ≈ 8 − 10 = −2 (a strong acid; observed about −1).
  2. One. H₂PO(OH): two H on P, one OH.
  3. BBr₃. BF₃ is weakened by strong B–F π back-donation that is lost on pyramidalisation.

Level 2: Part B Style

Practice Q1. The correct order of acid strength is:

(a) HOI > HOBr > HOCl (b) HOCl > HOBr > HOI (c) HOBr > HOCl > HOI (d) all three are equal, since p = 0 for each

Answer: (b)

All three are E(OH) with p = 0, so Pauling’s rule gives the same first estimate (about 8), but within one structural class the electronegativity of the halogen decides: Cl pulls most electron density from O–H. Observed pKa about 7.5, 8.6, 10.6.

Practice Q2. Arrange the aqua ions in order of increasing acidity: [Na(H₂O)ₙ]⁺, [Mg(H₂O)₆]²⁺, [Al(H₂O)₆]³⁺, [Fe(H₂O)₆]³⁺.

(a) Na⁺ < Mg²⁺ < Al³⁺ < Fe³⁺ (b) Fe³⁺ < Al³⁺ < Mg²⁺ < Na⁺ (c) Na⁺ < Mg²⁺ < Fe³⁺ < Al³⁺ (d) Mg²⁺ < Na⁺ < Al³⁺ < Fe³⁺

Answer: (a)

Charge density increases from Na⁺ to Mg²⁺ to the M³⁺ ions. Between the two M³⁺ ions, Fe³⁺ (pKa about 2.2) is more acidic than Al³⁺ (about 5): Fe³⁺ is larger, so \( z^2/r \) alone does not explain it; the more covalent Fe–O interaction does. Option (c) is the pure-size trap.

Practice Q3. Which oxoacid is predicted by Pauling’s rules to be the weakest?

(a) H₂SO₄ (b) H₅IO₆ (c) H₆TeO₆ (d) HNO₃

Answer: (c) H₆TeO₆

H₆TeO₆ = Te(OH)₆, p = 0, pKa₁ ≈ 8. H₅IO₆ = IO(OH)₅, p = 1, ≈ 3. H₂SO₄ and HNO₃ have p = 2, ≈ −2.

Practice Q4. In aqueous solution, the order of basicity of the methylamines is:

(a) Me₃N > Me₂NH > MeNH₂ > NH₃ (b) Me₂NH > MeNH₂ > Me₃N > NH₃ (c) NH₃ > MeNH₂ > Me₂NH > Me₃N (d) MeNH₂ > Me₂NH > NH₃ > Me₃N

Answer: (b)

pKa of conjugate acids: Me₂NH₂⁺ 10.73, MeNH₃⁺ 10.64, Me₃NH⁺ 9.80, NH₄⁺ 9.25. Option (a) is the gas-phase order.

Level 3: Part C Style

Practice Q5. Three oxoacids of an element X have the molecular formulas H₃XO₄, H₃XO₃ and H₃XO₂. Their measured pKa₁ values are all between 1 and 2.3. Titration shows that H₃XO₄ is tribasic, H₃XO₃ dibasic and H₃XO₂ monobasic. Which statements are correct?

  1. All three acids have exactly one terminal (P=O-type) oxygen.
  2. H₃XO₃ contains one X–H bond.
  3. H₃XO₂ is expected to be a reducing agent.
  4. If H₃XO₃ had the structure X(OH)₃, Pauling’s rule would predict pKa₁ near 8.

(a) 1, 2, 3 and 4 (b) 1 and 2 only (c) 2, 3 and 4 only (d) 1 and 4 only

Answer: (a) 1, 2, 3 and 4

pKa₁ near 2 fits p = 1 for all three (Pauling: 3; the observed values run 1–2 units lower for these acids). With one terminal O each:

  • H₃XO₄ = XO(OH)₃: three OH, tribasic.
  • H₃XO₃ = HXO(OH)₂: two OH and one X–H, dibasic.
  • H₃XO₂ = H₂XO(OH): one OH and two X–H, monobasic.

X–H bonds make the lower acids reducing (the behaviour of phosphorous and hypophosphorous acids). A structure X(OH)₃ would have p = 0 and pKa₁ ≈ 8, which contradicts the data. X is phosphorus.

Practice Q6. Use Pauling’s rules to predict all three pKa values of H₃AsO₄, and compare with observed values of about 2.2, 7.0 and 11.5. Which statement is correct?

(a) Predicted 3, 8, 13; the rules overestimate each value by roughly 1–1.5 units (b) Predicted 8, 13, 18; the rules fail completely for arsenic acid (c) Predicted −2, 3, 8; the rules underestimate each value (d) Predicted 3, 3, 3; successive pKa values do not change

Answer: (a)

H₃AsO₄ = AsO(OH)₃: p = 1, pKa₁ ≈ 8 − 5 = 3; Rule 2 adds 5 each time: 3, 8, 13. Observed minus predicted: −0.8, −1.0, −1.5. The rule is a one-unit estimate; it is good enough to classify and to deduce structure, not to give a second decimal.

Practice Q7. Consider the statements:

  1. 2,6-Dimethylpyridine is a stronger base than pyridine towards H⁺ but a weaker base towards B(CH₃)₃.
  2. The order of Lewis acidity towards pyridine is BF₃ > BCl₃ > BBr₃.
  3. In the gas phase, trimethylamine has a higher proton affinity than ammonia.
  4. Boric acid is a monobasic Lewis acid whose apparent strength in water increases on adding mannitol.

Which are correct?

(a) 1, 3 and 4 only (b) 1 and 2 only (c) 2 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 3 and 4 only
  1. Correct. Inductive effect to H⁺; F-strain with B(CH₃)₃.
  2. Wrong. The order is the reverse, BF₃ < BCl₃ < BBr₃ (π back-donation, reorganisation energy).
  3. Correct. Without solvation the inductive effect gives Me₃N > Me₂NH > MeNH₂ > NH₃.
  4. Correct. B(OH)₃ accepts OH⁻; mannitol forms a chelate borate ester, which pulls the equilibrium over.

Quick Revision Table

IdeaFact
Hydride acidity, across periodCH₄ < NH₃ < H₂O < HF (electronegativity)
Hydride acidity, down groupHF ≪ HCl < HBr < HI (bond strength)
HF weakstrong bond (about 570 kJ mol⁻¹); unfavourable entropy of F⁻ hydration; pKa about 3.2
Hydride basicityNH₃ > PH₃ > AsH₃ > SbH₃
Pauling rule 1pKa₁ ≈ 8 − 5p (p = terminal O)
Pauling rule 2successive pKa rise by about 5
Basicity of P acidsH₃PO₄ 3, H₃PO₃ 2, H₃PO₂ 1
ExceptionsH₂CO₃ (unhydrated CO₂), B(OH)₃ (Lewis acid)
HypohalousHOCl > HOBr > HOI
Aqua acidsacidity rises with \( z^2/r \) and covalency: Fe³⁺ (≈ 2.2) > Al³⁺ (≈ 5) > Fe²⁺ > Mg²⁺ > Na⁺
BX₃ to NH₃BF₃ < BCl₃ < BBr₃ < BI₃
Amines in waterMe₂NH > MeNH₂ > Me₃N > NH₃
Amines in gasMe₃N > Me₂NH > MeNH₂ > NH₃
F-strain2,6-lutidine weak towards BMe₃
Tied-back aminequinuclidine binds BMe₃ better than Et₃N

Key Takeaways

What’s Next