Non-aqueous Solvents: Liquid NH₃, HF, H₂SO₄, BrF₃, N₂O₄ and Superacids
CSIR NET chemistry: solvent classification, levelling and differentiating solvents, liquid NH₃, HF, H₂SO₄ cryoscopy, BrF₃, N₂O₄, SO₂ and superacids.
- 19 min
On this page · 20 sections
- Prerequisites
- The Hook: Titrating a Base That Water Cannot See
- Why Leave Water?
- Properties That Make a Good Ionising Solvent
- Classification
- Levelling and Differentiating Solvents
- Liquid Ammonia
- Anhydrous Hydrogen Fluoride
- Sulfuric Acid
- Bromine Trifluoride
- Dinitrogen Tetroxide
- Liquid Sulfur Dioxide: A Cautionary Example
- Superacids and Hammett Acidity
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Acid–Base Concepts: Arrhenius to Usanovich: the solvent-system definition and conjugate pairs.
- Strength of Acids and Bases: pKa, and why acid strength depends on the partner.
- The HSAB Concept: solubility and complexation in liquid ammonia follow hard–soft preferences.
- VSEPR Theory and the Shapes of Molecules: shapes of BrF₃, BrF₂⁺, BrF₄⁻ and NO₂⁺.
The Hook: Titrating a Base That Water Cannot See
Why Leave Water?
Water is cheap, safe, an excellent solvent for salts, and amphiprotic, but it limits chemistry in three ways:
- The acid–base window is fixed. Nothing stronger than H₃O⁺ or OH⁻ survives in water.
- The redox window is fixed. Strong reductants (alkali metals) reduce water to H₂; strong oxidants (F₂) oxidise it to O₂.
- Water reacts with many substances (hydrolysis of SiCl₄, PCl₅, metal hydrides, many halides and carbanions).
A non-aqueous solvent shifts or widens these windows.
Properties That Make a Good Ionising Solvent
| Property | Why it matters |
|---|---|
| Dielectric constant (relative permittivity, ε) | high ε reduces the attraction between dissolved ions (Coulomb force ∝ 1/ε), so salts dissociate |
| Dipole moment and donor ability | solvates cations (donor solvents: NH₃, DMSO, H₂O) or anions (acceptor solvents: HF, H₂O) |
| Self-ionisation | provides the characteristic cation and anion for the solvent-system definition |
| Liquid range | must be liquid where you want to work (NH₃ only below about −33 °C at 1 atm) |
| Viscosity | high viscosity (H₂SO₄) slows ion mobility and makes handling harder |
Donor number (Gutmann) measures a solvent’s Lewis basicity: the negative enthalpy of its 1:1 adduct with SbCl₅ in 1,2-dichloroethane. Acceptor number measures Lewis acidity, from the ³¹P NMR shift of triethylphosphine oxide in the solvent. Strongly donating solvents (DMSO, pyridine) solvate cations well; strongly accepting solvents (water, HF, alcohols) solvate anions well.
Classification
graph TD
S[Solvents] --> P[Protic: contain an ionisable H]
S --> A[Aprotic: no ionisable H]
P --> P1[Acidic, protogenic: H2SO4, HF, CH3COOH, HCOOH]
P --> P2[Basic, protophilic: NH3, N2H4, amines]
P --> P3[Amphiprotic: H2O, alcohols]
A --> A1[Non-polar, inert: CCl4, C6H6, hexane]
A --> A2[Dipolar aprotic, coordinating: DMSO, DMF, CH3CN, acetone]
A --> A3[Self-ionising, often fluorinating: BrF3, N2O4, SbCl3]| Solvent | Melting point (°C) | Boiling point (°C) | ε (approx.) | Self-ionisation |
|---|---|---|---|---|
| H₂O | 0 | 100 | 78 (25 °C) | 2H₂O ⇌ H₃O⁺ + OH⁻ |
| NH₃ | about −78 | about −33 | about 22 (at bp) | 2NH₃ ⇌ NH₄⁺ + NH₂⁻ |
| HF | about −84 | about 19.5 | about 84 (0 °C) | 3HF ⇌ H₂F⁺ + HF₂⁻ |
| H₂SO₄ | about 10.4 | decomposes near 300 | about 100 | 2H₂SO₄ ⇌ H₃SO₄⁺ + HSO₄⁻ |
| CH₃COOH | about 16.6 | about 118 | about 6 | 2CH₃COOH ⇌ CH₃COOH₂⁺ + CH₃COO⁻ |
| BrF₃ | about 9 | about 126 | not needed | 2BrF₃ ⇌ BrF₂⁺ + BrF₄⁻ |
| N₂O₄ | about −11 | about 21 | about 2.4 | N₂O₄ ⇌ NO⁺ + NO₃⁻ |
Learn the self-ionisation equations exactly; the physical constants are for orientation (sources differ slightly).
Levelling and Differentiating Solvents
| Solvent | Strongest acid possible | Strongest base possible | Effect |
|---|---|---|---|
| H₂O | H₃O⁺ | OH⁻ | HCl, HBr, HI, HNO₃, HClO₄ all levelled to H₃O⁺ |
| NH₃ (l) | NH₄⁺ | NH₂⁻ | acetic acid and other weak aqueous acids become strong; strong bases differentiated |
| CH₃COOH | CH₃COOH₂⁺ | CH₃COO⁻ | strong mineral acids differentiated; bases levelled to acetate-strength |
| H₂SO₄ | H₃SO₄⁺ | HSO₄⁻ | almost every base levelled; HNO₃, H₂O, CH₃COOH behave as bases |
- A basic solvent (NH₃, pyridine, ethylenediamine) levels acids and differentiates bases.
- An acidic solvent (CH₃COOH, HCOOH, H₂SO₄, HF) levels bases and differentiates acids.
In glacial acetic acid the mineral acids are only partly ionised and can be ranked; the usual order given is
$$\text{HClO}_4 > \text{HBr} > \text{H}_2\text{SO}_4 > \text{HCl} > \text{HNO}_3$$This is why perchloric acid in glacial acetic acid is the titrant of choice for weak bases (amines, alkaloids, carboxylate salts). HClO₄ protonates the solvent to CH₃COOH₂⁺, an acid far stronger than H₃O⁺ (acetic acid is a much weaker base than water), and it reacts essentially completely with the weak base, so the end point is sharp. At the same time the weakly basic solvent does not compete with the analyte, as water would.
The acid–base discrimination window
The range of pKa values that can be distinguished in a solvent is set by its autoprotolysis constant. In water the window runs from the pKa of H₃O⁺ (taken as 0 on the usual aqueous scale) to that of H₂O (14): a width of 14 units, equal to pKw. Acids with pKa below the window are levelled to H₃O⁺; bases whose conjugate acids have pKa above it are levelled to OH⁻. A solvent with a larger autoprotolysis pK has a wider window; a more acidic solvent moves the window towards stronger acids, a more basic one towards weaker acids.
Liquid Ammonia
Properties
Liquid ammonia is the most studied non-aqueous solvent. Compared with water it is less polar (ε about 22 against 78), more basic, a weaker acid, and has a lower boiling point. Consequences:
- Ionic salts with highly charged ions (sulfates, carbonates, phosphates, fluorides) are less soluble than in water.
- Salts with large, polarisable anions and soft cations (iodides, nitrates, thiocyanates, many Ag⁺ salts) dissolve well, helped by strong ammine complex formation.
- Organic compounds dissolve better than in water.
Acid–base reactions
The solvent-system acid is NH₄⁺, the base NH₂⁻:
$$\text{NH}_4\text{Cl} + \text{KNH}_2 \rightarrow \text{KCl} + 2\text{NH}_3 \qquad (\text{neutralisation})$$Because NH₃ is much more basic than water, weak aqueous acids become strong:
$$\text{CH}_3\text{COOH} + \text{NH}_3 \rightarrow \text{NH}_4^+ + \text{CH}_3\text{COO}^- \qquad (\text{complete})$$Bases stronger than NH₂⁻ (H⁻, C₂²⁻, carbanions) are levelled to NH₂⁻; for example NaH gives NaNH₂ and H₂.
Amphoterism
Zinc amide behaves like zinc hydroxide in water:
$$\text{Zn(NH}_2)_2 + 2\text{KNH}_2 \rightarrow \text{K}_2[\text{Zn(NH}_2)_4] \qquad (\text{as an acid})$$$$\text{Zn(NH}_2)_2 + 2\text{NH}_4\text{Cl} \rightarrow [\text{Zn(NH}_3)_4]\text{Cl}_2 \qquad (\text{as a base})$$Ammonolysis (the analogue of hydrolysis)
$$\text{SiCl}_4 + 8\text{NH}_3 \rightarrow \text{Si(NH}_2)_4 + 4\text{NH}_4\text{Cl}$$Ammonolysis replaces a halide with NH₂ (or NH, N on heating) as hydrolysis replaces it with OH (or O).
Precipitation reversed
Solubilities in liquid ammonia differ so much from water that a metathesis can run “backwards” from the aqueous habit:
$$\text{Ba(NO}_3)_2 + 2\text{AgCl} \xrightarrow{\text{NH}_3(l)} \text{BaCl}_2\!\downarrow + 2\text{AgNO}_3$$In water AgCl precipitates. In ammonia, Ag⁺ is held as a soluble ammine complex and AgCl dissolves, while BaCl₂ (a salt of a hard, doubly charged cation) is insoluble and precipitates.
Solutions of alkali metals
Alkali metals (and Ca, Sr, Ba) dissolve in liquid ammonia without immediate reaction:
$$\text{M} \xrightarrow{\text{NH}_3(l)} \text{M}^+(\text{am}) + e^-(\text{am})$$| Property | Dilute solutions | Concentrated solutions |
|---|---|---|
| Colour | deep blue (same for every metal) | bronze or copper, metallic lustre |
| Origin | solvated (ammoniated) electron, absorbing broadly in the near infrared and red | electrons delocalised as in a liquid metal |
| Magnetism | paramagnetic (unpaired solvated electrons); molar susceptibility falls as concentration rises (electron pairing) | weakly paramagnetic, approaching a metal |
| Conductivity | high, mainly from the mobile electron | very high, metal-like |
| Density | lower than pure ammonia; solutions occupy more volume than their components (cavities around the electrons) | lower still |
The blue colour is independent of the metal, which is the evidence that it belongs to the electron, not to M⁺. In an intermediate concentration range, and at low enough temperature, the solution separates into two liquid phases, a lower blue one and an upper bronze one.
These solutions are metastable. Slowly, and quickly in the presence of catalysts such as iron oxides or other transition-metal compounds, they decompose:
$$2\text{Na} + 2\text{NH}_3 \rightarrow 2\text{NaNH}_2 + \text{H}_2$$They are powerful reducing agents: the Birch reduction of arenes to 1,4-cyclohexadienes, and the preparation of compounds with metals in unusually low oxidation states, for example the reduction of K₂[Ni(CN)₄] with potassium to give K₄[Ni(CN)₄], a nickel(0) complex. With a cryptand that encapsulates the cation, sodium forms salts of the sodide anion, [Na(cryptand)]⁺Na⁻ (alkalides), and with suitable complexants, electrides, in which the anion is a trapped electron.
Anhydrous Hydrogen Fluoride
Liquid HF has a high dielectric constant (comparable to water), a convenient liquid range near room temperature, and very strong hydrogen bonding (zig-zag chains of HF molecules). It is extremely toxic and corrosive, and is handled in Teflon, polyethylene or Monel, not glass (it attacks silica).
$$3\text{HF} \rightleftharpoons \text{H}_2\text{F}^+ + \text{HF}_2^-$$HF is a very acidic solvent, so almost everything dissolved in it acts as a base:
$$\text{KF} + \text{HF} \rightarrow \text{K}^+ + \text{HF}_2^- \qquad \text{H}_2\text{O} + 2\text{HF} \rightarrow \text{H}_3\text{O}^+ + \text{HF}_2^-$$$$\text{HNO}_3 + 2\text{HF} \rightarrow \text{H}_2\text{NO}_3^+ + \text{HF}_2^- \qquad \text{CH}_3\text{COOH} + 2\text{HF} \rightarrow \text{CH}_3\text{C(OH)}_2^+ + \text{HF}_2^-$$Only strong fluoride-ion acceptors behave as acids:
$$\text{SbF}_5 + 2\text{HF} \rightarrow \text{H}_2\text{F}^+ + \text{SbF}_6^-$$Similar fluoride acceptors such as AsF₅ also act as acids. HF is the medium for electrochemical fluorination of organic compounds and for preparing many fluorides.
Sulfuric Acid
Pure H₂SO₄ is viscous (strong hydrogen bonding), has a very high dielectric constant, and is a very strong acid. Its main self-ionisation is
$$2\text{H}_2\text{SO}_4 \rightleftharpoons \text{H}_3\text{SO}_4^+ + \text{HSO}_4^-$$with smaller contributions such as 2H₂SO₄ ⇌ H₃O⁺ + HS₂O₇⁻. Because H₂SO₄ is so acidic, most solutes are bases; the characteristic base is HSO₄⁻.
Cryoscopy: counting particles
The freezing point of H₂SO₄ (about 10.4 °C) is conveniently high and its cryoscopic constant is large, so freezing-point depression measures the number of particles a solute produces, the van ’t Hoff factor i:
$$\boxed{\Delta T_f = i\,K_f\,m}$$With \( K_f \approx 6.12 \) K kg mol⁻¹ for H₂SO₄:
| Solute | Reaction in H₂SO₄ | i |
|---|---|---|
| H₂O | H₂O + H₂SO₄ → H₃O⁺ + HSO₄⁻ | 2 |
| CH₃COOH | CH₃COOH + H₂SO₄ → CH₃COOH₂⁺ + HSO₄⁻ | 2 |
| C₂H₅OH | C₂H₅OH + 2H₂SO₄ → C₂H₅HSO₄ + H₃O⁺ + HSO₄⁻ | 3 |
| HNO₃ | HNO₃ + 2H₂SO₄ → NO₂⁺ + H₃O⁺ + 2HSO₄⁻ | 4 |
| Ph₃COH | Ph₃COH + 2H₂SO₄ → Ph₃C⁺ + H₃O⁺ + 2HSO₄⁻ | 4 |
| H₃BO₃ | H₃BO₃ + 6H₂SO₄ → B(HSO₄)₄⁻ + 3H₃O⁺ + 2HSO₄⁻ | 6 |
The i = 4 value for nitric acid was a key piece of evidence for the nitronium ion, NO₂⁺, the electrophile in aromatic nitration. The i = 4 value for triphenylmethanol shows the formation of the stable triphenylmethyl cation (yellow).
Acids in sulfuric acid
Very few solutes are acids in H₂SO₄. HClO₄ and HSO₃F are only weak acids in it. Disulfuric acid H₂S₂O₇ (in oleum) is a moderately strong acid, and the strong acid of this solvent is H[B(HSO₄)₄], obtained when boric acid is dissolved in oleum:
$$\text{H[B(HSO}_4)_4] + \text{H}_2\text{SO}_4 \rightarrow \text{H}_3\text{SO}_4^+ + [\text{B(HSO}_4)_4]^-$$Bromine Trifluoride
BrF₃ is a T-shaped interhalogen and a fierce fluorinating agent; it reacts explosively with water and most organic matter. It self-ionises:
$$2\text{BrF}_3 \rightleftharpoons \text{BrF}_2^+ + \text{BrF}_4^-$$BrF₂⁺ is bent (AX₂E₂) and BrF₄⁻ square planar (AX₄E₂).
| Role | Example | Reaction |
|---|---|---|
| Acid (gives BrF₂⁺) | SbF₅ | SbF₅ + BrF₃ → [BrF₂]⁺[SbF₆]⁻ |
| Base (gives BrF₄⁻) | KF | KF + BrF₃ → K⁺[BrF₄]⁻ |
| Neutralisation | [BrF₂][SbF₆] + K[BrF₄] → K[SbF₆] + 2BrF₃ |
Because it both fluorinates and provides an acid–base medium, BrF₃ converts metals and metal compounds directly into fluoro complexes; gold, for example, gives [BrF₂][AuF₄], from which AuF₃ can be obtained.
Dinitrogen Tetroxide
N₂O₄ has a low dielectric constant (about 2.4), so it dissolves few salts, but it is a useful medium for making anhydrous metal nitrates. Its self-ionisation is written
$$\text{N}_2\text{O}_4 \rightleftharpoons \text{NO}^+ + \text{NO}_3^-$$- Acids are NO⁺ donors: NOCl, [NO][BF₄].
- Bases are nitrate donors: ionic nitrates such as [Et₂NH₂]NO₃ or AgNO₃.
- Neutralisation: NOCl + AgNO₃ → AgCl + N₂O₄.
Metals react with N₂O₄ (often in a donor solvent such as ethyl acetate) to give nitrates, releasing NO:
$$\text{Cu} + 3\text{N}_2\text{O}_4 \rightarrow \text{Cu(NO}_3)_2\cdot\text{N}_2\text{O}_4 + 2\text{NO}$$Gentle heating of the adduct gives anhydrous Cu(NO₃)₂, which cannot be made by dehydrating the hydrate (that only hydrolyses it). Zinc nitrate shows amphoteric behaviour in this solvent: with excess nitrate it forms [Zn(NO₃)₄]²⁻, the analogue of zincate.
Liquid Sulfur Dioxide: A Cautionary Example
The self-ionisation 2SO₂ ⇌ SO²⁺ + SO₃²⁻ was proposed to fit the solvent-system picture, with SOCl₂ as an acid and sulfites as bases:
$$\text{SOCl}_2 + \text{Cs}_2\text{SO}_3 \rightarrow 2\text{CsCl} + 2\text{SO}_2$$The reaction itself is real. The postulated self-ionisation is not supported: isotope-exchange experiments with labelled SO₂ and SOCl₂ do not show the rapid exchange that a common SO²⁺ intermediate would require, and the conductivity of pure SO₂ is very low. The lesson the exam tests: the solvent-system definition can describe a reaction correctly even when the assumed self-ionisation is doubtful. Liquid SO₂ remains a useful inert, polar, aprotic solvent, including for superacid and carbocation chemistry.
Superacids and Hammett Acidity
pH has no meaning in pure acids, so acidity is measured by the Hammett acidity function, using a weakly basic indicator B whose protonated form BH⁺ has a known pKa:
$$\boxed{H_0 = \text{p}K_{\text{BH}^+} - \log\frac{[\text{BH}^+]}{[\text{B}]}}$$In dilute aqueous solution H₀ equals pH. A more negative H₀ means a stronger acid medium.
A superacid is a medium more acidic than 100% sulfuric acid, whose H₀ is about −12. Common examples:
| Superacid | Composition | Note |
|---|---|---|
| Fluorosulfuric acid | HSO₃F | H₀ about −15 |
| “Magic acid” | HSO₃F + SbF₅ | SbF₅ removes F⁻-type bases, raising acidity enormously |
| Fluoroantimonic acid | HF + SbF₅ | among the strongest known media |
| Triflic acid | CF₃SO₃H | a strong Brønsted superacid |
A Lewis acid (SbF₅) added to a Brønsted acid ties up the conjugate base and makes the proton far more available:
$$2\text{HF} + \text{SbF}_5 \rightarrow \text{H}_2\text{F}^+ + \text{SbF}_6^-$$Superacids protonate very weak bases, including alkanes and alkenes, and let stable carbocations (for example the tert-butyl cation from isobutane) be observed by NMR, work recognised in G. A. Olah’s carbocation chemistry. They also stabilise unusual cations such as I₂⁺ and S₈²⁺, usually studied in SO₂ or HSO₃F as the medium.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Levelling: several acids appear equally strong | differentiating: their strengths can be ranked | |
| Acetic acid as solute in NH₃: strong acid | acetic acid as solvent: differentiates HClO₄ > HBr > H₂SO₄ > HCl > HNO₃ | |
| Dilute M in NH₃: blue, paramagnetic | concentrated: bronze, metallic | |
| HNO₃ in water: strong acid | HNO₃ in H₂SO₄ or HF: base (gives NO₂⁺ or H₂NO₃⁺) | |
| BrF₂⁺: bent | BrF₄⁻: square planar | |
| N₂O₄ ⇌ NO⁺ + NO₃⁻ (solvent) | nitronium NO₂⁺ (from HNO₃ in H₂SO₄) | |
| H₀ (any medium, via indicator) | pH (dilute aqueous only) |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- Write the self-ionisation of BrF₃.
- What is the van ’t Hoff factor of HNO₃ dissolved in pure H₂SO₄?
- Is a dilute solution of potassium in liquid ammonia diamagnetic or paramagnetic?
Answers
- 2BrF₃ ⇌ BrF₂⁺ + BrF₄⁻.
- 4: HNO₃ + 2H₂SO₄ → NO₂⁺ + H₃O⁺ + 2HSO₄⁻.
- Paramagnetic: unpaired solvated electrons.
Level 2: Part B Style
Practice Q1. In liquid ammonia, acetic acid behaves as:
(a) a weak acid, as in water (b) a strong acid (c) a base (d) a non-electrolyte
Answer: (b) a strong acid
NH₃ is far more basic than water, so CH₃COOH is converted completely to NH₄⁺ and CH₃COO⁻: it is levelled to the strength of NH₄⁺.
Practice Q2. In liquid BrF₃, which solute behaves as an acid?
(a) KF (b) SbF₅ (c) NaF (d) CsF
Answer: (b) SbF₅
SbF₅ + BrF₃ → [BrF₂]⁺[SbF₆]⁻ raises the solvent’s cation. The alkali fluorides give BrF₄⁻ and are bases.
Practice Q3. When Ba(NO₃)₂ and AgCl are mixed in liquid ammonia, the precipitate is:
(a) AgCl (b) BaCl₂ (c) AgNO₃ (d) Ba(NH₂)₂
Answer: (b) BaCl₂
AgCl dissolves in liquid NH₃ (Ag⁺ forms soluble ammine complexes), while BaCl₂ is insoluble in this low-ε solvent. The metathesis runs in the opposite direction to the aqueous habit.
Practice Q4. Glacial acetic acid is used as a solvent for titrating weak bases with HClO₄ because acetic acid:
(a) is a stronger base than water, so it levels the weak bases (b) is a weaker base than water, so HClO₄ gives CH₃COOH₂⁺, an acid much stronger than H₃O⁺, which protonates the weak base completely (c) has a higher dielectric constant than water (d) reacts with the weak bases to form insoluble salts
Answer: (b)
Acetic acid is less basic than water, so perchloric acid is not levelled down to H₃O⁺ strength: its solvated proton, CH₃COOH₂⁺, is a far stronger acid, and the titration reaction with a weak base goes essentially to completion, giving a sharp end point. (a) is backwards, (c) is false (ε of acetic acid is about 6) and (d) is irrelevant.
Level 3: Part C Style
Practice Q5. A solute X (0.050 mol kg⁻¹) in pure H₂SO₄ lowers the freezing point by 1.84 K. Take \( K_f = 6.12 \) K kg mol⁻¹. Which X fits the data?
(a) H₂O (b) C₂H₅OH (c) HNO₃ (d) H₃BO₃
Answer: (d) H₃BO₃
\( i = \Delta T_f/(K_f m) = 1.84/(6.12 \times 0.050) = 1.84/0.306 = 6.0 \).
Six particles per formula unit: H₃BO₃ + 6H₂SO₄ → [B(HSO₄)₄]⁻ + 3H₃O⁺ + 2HSO₄⁻. The other options give i = 2 (H₂O), 3 (C₂H₅OH) and 4 (HNO₃), that is ΔT = 0.61, 0.92 and 1.22 K.
Practice Q6. An indicator B with \( \text{p}K_{\text{BH}^+} = -8.0 \) is 10 times more protonated than unprotonated ([BH⁺]/[B] = 10) in medium M₁. A second indicator with \( \text{p}K_{\text{BH}^+} = -10.0 \) has [BH⁺]/[B] = 10⁴ in medium M₂. Which statements are correct?
- H₀ of M₁ is −9.0.
- H₀ of M₂ is −14.0.
- M₁ is a superacid.
- M₂ is more acidic than 100% H₂SO₄.
(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 4 only
\( H_0 = \text{p}K_{\text{BH}^+} - \log([\text{BH}^+]/[\text{B}]) \).
- M₁: −8.0 − log 10 = −8.0 − 1 = −9.0.
- M₂: −10.0 − log 10⁴ = −10.0 − 4 = −14.0.
100% H₂SO₄ has H₀ about −12. M₁ (−9.0) is less acidic than that, so it is not a superacid: statement 3 is wrong. M₂ (−14.0) is more acidic: a superacid.
Practice Q7. Consider the statements:
- In anhydrous HF, water and nitric acid both behave as bases.
- In liquid N₂O₄, NOCl is an acid and AgNO₃ is a base.
- The conductivity and isotope-exchange behaviour of liquid SO₂ strongly support the self-ionisation 2SO₂ ⇌ SO²⁺ + SO₃²⁻.
- Concentrated solutions of sodium in liquid ammonia are bronze-coloured and conduct like metals.
Which are correct?
(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 4 only
- Correct. H₂O + 2HF → H₃O⁺ + HF₂⁻; HNO₃ + 2HF → H₂NO₃⁺ + HF₂⁻.
- Correct. NOCl gives NO⁺ (solvent cation); AgNO₃ gives NO₃⁻ (solvent anion); they neutralise to AgCl + N₂O₄.
- Wrong. Pure SO₂ conducts very poorly and labelled-sulfur exchange with SOCl₂ is not fast enough to support a common SO²⁺ intermediate.
- Correct. Electrons delocalise as in a liquid metal.
Quick Revision Table
| Idea | Fact |
|---|---|
| Classification | protic (acidic, basic, amphiprotic); aprotic (inert, dipolar coordinating, self-ionising) |
| Levelling | strongest acid = SH₂⁺, strongest base = S⁻ of the solvent |
| Basic solvents | level acids (NH₃: CH₃COOH strong) |
| Acidic solvents | level bases; differentiate acids (CH₃COOH: HClO₄ > HBr > H₂SO₄ > HCl > HNO₃) |
| NH₃ (l) | 2NH₃ ⇌ NH₄⁺ + NH₂⁻; ε about 22; bp about −33 °C |
| In NH₃ | Zn(NH₂)₂ amphoteric; SiCl₄ ammonolysis; BaCl₂ precipitates from Ba(NO₃)₂ + AgCl |
| M in NH₃ | dilute: blue, paramagnetic, e⁻(am); concentrated: bronze, metallic; decomposes to MNH₂ + H₂ |
| HF | 3HF ⇌ H₂F⁺ + HF₂⁻; acids are strong F⁻ acceptors (SbF₅, AsF₅); H₂O, HNO₃, KF are bases |
| H₂SO₄ | 2H₂SO₄ ⇌ H₃SO₄⁺ + HSO₄⁻; ΔT = i K_f m, K_f ≈ 6.12 K kg mol⁻¹ |
| i values in H₂SO₄ | H₂O 2, CH₃COOH 2, C₂H₅OH 3, HNO₃ 4, Ph₃COH 4, H₃BO₃ 6 |
| BrF₃ | 2BrF₃ ⇌ BrF₂⁺ + BrF₄⁻; SbF₅ acid, KF base |
| N₂O₄ | N₂O₄ ⇌ NO⁺ + NO₃⁻; NOCl acid, nitrates bases; anhydrous metal nitrates |
| SO₂ (l) | SOCl₂ + Cs₂SO₃ → 2CsCl + 2SO₂; self-ionisation doubted |
| Hammett | H₀ = pK_BH⁺ − log([BH⁺]/[B]); superacid H₀ < about −12 |
| Superacids | HSO₃F, HSO₃F/SbF₅ (magic acid), HF/SbF₅, CF₃SO₃H |
Key Takeaways
What’s Next
- The chapter on one page: Acids, Bases and Non-aqueous Solvents: Quick Revision.
- Revisit Acid–Base Concepts for the solvent-system definition in context with the others.
- Shapes of the interhalogen ions met here: VSEPR Theory and the Shapes of Molecules.
- The subject overview and marking scheme: Chemical Sciences.