Skip to content

Benzenoid Aromatic Compounds: Benzene and Polycyclic Arenes

CSIR NET organic chemistry: benzene resonance energy, PAHs, Clar's sextets, and syntheses and reactions of naphthalene, anthracene and phenanthrene.

  • 18 min read
  • Updated
On this page · 16 sections
  1. Prerequisites
  2. The Hook: Three Products From One Xylene
  3. Benzenoid vs Non-benzenoid
  4. Benzene: Structure and Stability
  5. Polycyclic Benzenoid Arenes
  6. Generation: How Benzenoid Arenes Are Made
  7. Reactions of Benzene
  8. Reactions of Naphthalene
  9. Reactions of Anthracene and Phenanthrene
  10. Memory Tricks
  11. Don’t Confuse
  12. Common Mistakes
  13. Practice
  14. Quick Revision Table
  15. Key Takeaways
  16. What’s Next

Prerequisites

The Hook: Three Products From One Xylene

Benzenoid vs Non-benzenoid

Benzenoid aromatic compound
A benzenoid aromatic compound contains one or more benzene rings, alone or fused through shared C–C edges (naphthalene, anthracene, phenanthrene, pyrene). A non-benzenoid aromatic compound is aromatic but contains no six-membered benzene ring as its aromatic unit: aromatic ions (C₃H₃⁺, C₅H₅⁻, C₇H₇⁺, C₈H₈²⁻), azulene, annulenes other than [6], and tropolones. Heteroaromatics (pyridine, pyrrole) are usually treated separately.

Benzene: Structure and Stability

PropertyValue or fact
Formula, shapeC₆H₆; planar regular hexagon, point group D₆h
C–C bond lengthall six 1.39–1.40 Å (single 1.54, double 1.34)
C–H bond lengthabout 1.09 Å
Hybridisationsp² at every carbon; 120° angles; no angle strain
π electrons6 (\( n = 1 \))
Resonance energyabout 151 kJ mol⁻¹ (36 kcal mol⁻¹), from heats of hydrogenation
¹H NMRsingle line near δ 7.3 (ring-current deshielding)
Kekulé structures2 equivalent; Dewar structures make a minor contribution

MO picture

The six \( 2p_z \) orbitals give six π MOs. In Hückel theory their energies are \( \alpha + 2\beta \), \( \alpha + \beta \) (×2), \( \alpha - \beta \) (×2) and \( \alpha - 2\beta \). In D₆h they transform as \( a_{2u} \) (lowest, no node), \( e_{1g} \) (HOMO pair), \( e_{2u} \) (LUMO pair) and \( b_{2g} \) (highest). Six electrons fill the three bonding MOs: a closed shell with \( E_\pi = 6\alpha + 8\beta \) and a Hückel delocalisation energy of \( 2\beta \).

Valence isomers of benzene

C₆H₆ has several non-aromatic valence isomers, all much higher in energy than benzene:

IsomerStructureNotes
Dewar benzenebicyclo[2.2.0]hexa-2,5-dienereverts to benzene on warming; the reverse is very exothermic yet slow, because the concerted ring opening is symmetry-forbidden thermally
Benzvalenetricyclic, with a bicyclobutane unitformed in low yield when benzene is irradiated at 254 nm (with fulvene); explosive
Prismane (“Ladenburg benzene”)triangular prism of six CHstrained; one of the rejected 19th-century structures for benzene

The kinetic persistence of Dewar benzene despite a large driving force back to benzene is a favourite link to pericyclic selection rules.

Kekulé proof by ozonolysis

Ozonolysis cleaves every C=C. For a Kekulé structure of a substituted benzene, the three C=C units are cleaved into three two-carbon fragments. Each fragment becomes a 1,2-dicarbonyl: H/H → glyoxal (OHC–CHO), H/CH₃ → methylglyoxal, CH₃/CH₃ → biacetyl.

AreneKekulé structure AKekulé structure BTotal (A + B)
o-Xylene2 methylglyoxal + 1 glyoxal1 biacetyl + 2 glyoxalglyoxal : methylglyoxal : biacetyl = 3 : 2 : 1
Mesitylene (1,3,5-)3 methylglyoxal3 methylglyoxalmethylglyoxal only
1,2,3-Trimethylbenzene1 each1 each1 : 1 : 1

Only o-xylene gives a product set that distinguishes the two Kekulé structures; mesitylene and 1,2,3-trimethylbenzene give the same products from both. This makes an excellent Part C distractor.

Polycyclic Benzenoid Arenes

Kekulé structures and Pauling bond orders

The Pauling bond order of a bond is the fraction of Kekulé structures in which it is double (plus 1 for the σ bond, if total order is wanted). Count the Kekulé structures first.

Areneπ electronsKekulé structuresKey bonds (fraction double)
Benzene62every bond 1/2
Naphthalene103C1–C2 2/3; C2–C3 1/3; C1–C8a 1/3; C4a–C8a 1/3
Anthracene144C1–C2 3/4; C2–C3 1/4; C9–C9a 1/2
Phenanthrene145C9–C10 4/5; C1–C2 3/5; C4a–C4b 1/5
Tetracene185acenes have \( N + 1 \) structures for \( N \) rings
Pyrene166aromatic despite a \( 4n \) count
Triphenylene189three isolated-looking benzene rings

The pattern explains the bond lengths: in naphthalene C1–C2 (about 1.37 Å) is clearly shorter than C2–C3 (about 1.42 Å), and phenanthrene’s C9–C10 bond behaves almost like an isolated alkene.

Clar’s aromatic sextet rule

Clar's rule
Of all resonance structures of a benzenoid hydrocarbon, the most important is the one with the largest number of disjoint aromatic π-sextets (benzene-like rings drawn with a circle, sharing no carbon atoms). More sextets means greater stability and lower reactivity.
AreneMaximum Clar sextetsConsequence
Naphthalene1 (can sit in either ring: “migrating”)reacts more readily than benzene
Anthracene1 (migrating over three rings)reactive middle ring; adds at C9/C10
Tetracene, pentacene1increasingly reactive, coloured, air-sensitive
Phenanthrene2 (outer rings)more stable than anthracene; C9–C10 left as a localised C=C
Triphenylene3 (“fully benzenoid”)very unreactive; central ring has little double-bond character

Stability: phenanthrene vs anthracene

Both are C₁₄H₁₀, but phenanthrene is the more stable isomer. Every model agrees:

MeasureAnthracenePhenanthrene
Kekulé structures45
Clar sextets12
Hückel delocalisation energy\( 5.314\beta \)\( 5.448\beta \)
Classical resonance energy (thermochemical, commonly quoted)about 84 kcal mol⁻¹about 92 kcal mol⁻¹

Commonly quoted classical resonance energies are about 36 (benzene), 61 (naphthalene), 84 (anthracene) and 92 (phenanthrene) kcal mol⁻¹. Per ring they fall below benzene’s 36: fused rings are less aromatic per ring, which is why naphthalene and anthracene are more reactive than benzene.

Generation: How Benzenoid Arenes Are Made

The syllabus asks for “generation”. For benzenoids this means the standard routes that build or unveil an aromatic ring.

graph LR
    A["Build the ring"] --> A1["Alkyne cyclotrimerisation
(Ni, Co catalysts)"] A --> A2["Diels-Alder, then
aromatise"] A --> A3["Intramolecular Friedel-Crafts
(Haworth, anthraquinone route)"] A --> A4["Photocyclisation of stilbenes
(Mallory)"] A --> A5["Radical/diazonium ring closure
(Pschorr)"] B["Unveil the ring"] --> B1["Dehydrogenation:
Pd/C, S, Se, DDQ, chloranil"]

1. Alkyne cyclotrimerisation

Three alkynes combine to a benzene ring. Heating acetylene alone gives benzene only under harsh conditions; transition-metal catalysts make it practical: Reppe’s nickel catalysts, and cobalt catalysts such as CpCo(CO)₂ (Vollhardt), which co-trimerise a diyne with a third alkyne to give fused arenes regioselectively. Lewis-acid trimerisation of 2-butyne gives hexamethyl Dewar benzene, a stable valence isomer of hexamethylbenzene.

2. Dehydrogenation (aromatisation)

Partially saturated six-membered rings are converted to arenes by heating with Pd/C, sulfur or selenium, or by hydride-abstracting quinones (DDQ, chloranil). The aromatic stabilisation drives these reactions. This is the last step of the Haworth and Bardhan–Sengupta syntheses, and also how natural terpenoid skeletons were historically identified (selenium dehydrogenation to known arenes).

3. Haworth synthesis (naphthalenes and phenanthrenes)

graph TD
    A["Benzene + succinic anhydride"] -->|"AlCl3 (Friedel-Crafts acylation)"| B["3-Benzoylpropanoic acid"]
    B -->|"Zn(Hg), HCl (Clemmensen)"| C["4-Phenylbutanoic acid"]
    C -->|"H2SO4 or PPA (intramolecular acylation)"| D["1-Tetralone"]
    D -->|"Clemmensen reduction"| E["Tetralin"]
    E -->|"Se or Pd/C, heat (dehydrogenation)"| F["Naphthalene"]

Using a Grignard reagent on the tetralone before dehydrogenation installs a 1-substituent. Starting from naphthalene instead of benzene gives phenanthrene by the same sequence.

4. Anthracene and anthraquinone from phthalic anhydride

Benzene + phthalic anhydride (AlCl₃) → 2-benzoylbenzoic acid → concentrated H₂SO₄ (cyclodehydration) → 9,10-anthraquinone → reduction (for example zinc dust distillation) → anthracene. The Elbs reaction is an older route: pyrolysis of a diaryl ketone carrying an ortho-methyl group gives an anthracene.

5. Phenanthrene syntheses

MethodKey step
Haworthsuccinic anhydride on naphthalene, then the naphthalene sequence
Bardhan–Senguptaalkylation of a cyclohexanone β-keto ester with a 2-arylethyl halide, reduction, cyclodehydration with P₂O₅, then selenium dehydrogenation; regiospecific, widely used for steroid-like skeletons
Pschorrdiazotisation of an α-aryl-2-aminocinnamic acid; copper-promoted intramolecular aryl coupling gives a phenanthrene-9-carboxylic acid
Mallory photocyclisationirradiation of a stilbene gives a dihydrophenanthrene (photochemical 6π disrotatory electrocyclisation), which an oxidant (I₂ with air) aromatises

Reactions of Benzene

Substitution, not addition

The defining reaction is electrophilic aromatic substitution (SEAr): the electrophile adds to give a cyclohexadienyl cation (arenium ion, Wheland intermediate, σ-complex), which then loses H⁺ to restore the aromatic ring. Addition would leave a non-aromatic product and is disfavoured.

ReactionReagentElectrophile
NitrationHNO₃ / H₂SO₄NO₂⁺
HalogenationBr₂ / FeBr₃, Cl₂ / AlCl₃polarised X–X–Lewis acid complex
Sulfonationfuming H₂SO₄ (reversible)SO₃ (or HSO₃⁺)
Friedel–Crafts alkylationRCl / AlCl₃carbocation or complex (rearrangement, polyalkylation possible)
Friedel–Crafts acylationRCOCl / AlCl₃acylium ion RCO⁺ (no rearrangement; product deactivated)

Substituent effects and the detailed kinetics of SEAr belong to the reaction-mechanism unit; for aromaticity the key point is that the rate-determining step sacrifices aromaticity temporarily and the fast step restores it.

Reactions that do break the ring’s aromaticity

ReactionConditionsProduct
Catalytic hydrogenationH₂, Ni/Pt/Rh, heat and pressurecyclohexane (dienes and cyclohexene are not isolated)
Birch reductionLi or Na in liquid NH₃, with an alcohol (EtOH, t-BuOH)1,4-cyclohexadiene (non-conjugated)
Radical chlorination (UV)Cl₂, hνhexachlorocyclohexane (addition)
OzonolysisO₃, then work-upglyoxal (3 equivalents from benzene)
Photochemistry254 nmbenzvalene, fulvene (low yield); meta photocycloaddition with alkenes

Birch reduction regiochemistry

Mechanism: electron transfer → radical anion → protonation by the alcohol → radical → second electron → anion → protonation. The kinetic protonation of the pentadienyl anion at its central carbon gives the unconjugated 1,4-diene.

SubstituentTypeWhere it ends upExample
OMe, NR₂, alkylelectron-donatingon a remaining double bond (not reduced)anisole → 1-methoxycyclohexa-1,4-diene; acid hydrolysis then gives cyclohex-2-enone after conjugation
CO₂H, CONR₂electron-withdrawingon an sp³ carbon (reduced)benzoic acid → cyclohexa-2,5-diene-1-carboxylic acid

Side-chain oxidation

Alkyl groups with at least one benzylic C–H are oxidised by hot KMnO₄ or chromic acid to CO₂H, whatever their length; the aromatic ring survives. tert-Butylbenzene (no benzylic H) resists. This is the classic test that aromatic rings are oxidation-resistant while benzylic positions are activated.

Reactions of Naphthalene

Where electrophiles attack: C1 (α)

Attack at C1 gives an arenium ion with two resonance contributors that keep the other ring as an intact benzene ring; attack at C2 gives only one. The C1 transition state is lower, so kinetic substitution occurs at C1.

ReactionConditionsMain product
NitrationHNO₃ / H₂SO₄1-nitronaphthalene
BrominationBr₂ (no catalyst needed), CCl₄ or AcOH1-bromonaphthalene
Sulfonation, low temperature (about 80 °C)conc. H₂SO₄naphthalene-1-sulfonic acid (kinetic)
Sulfonation, high temperature (about 160 °C)conc. H₂SO₄naphthalene-2-sulfonic acid (thermodynamic)
Friedel–Crafts acetylation in CS₂ or CH₂Cl₂AcCl / AlCl₃mainly 1-acetylnaphthalene
Friedel–Crafts acetylation in nitrobenzeneAcCl / AlCl₃mainly 2-acetylnaphthalene

Why sulfonation reverses: sulfonation is reversible. The 1-isomer suffers a peri interaction between the bulky SO₃H and the H at C8, so at high temperature equilibrium favours the less hindered 2-isomer. In nitrobenzene the acylating complex is bulkier (solvated), so the less hindered C2 is preferred.

Second substitution

First substituentSecond electrophile goesExample
Activating at C1 (OH, OMe, NH₂, alkyl)same ring, mainly C4 (para-like)1-methoxynaphthalene → 4-substituted
Activating at C2 (2-naphthol)C1azo coupling of 2-naphthol at C1
Deactivating (NO₂, SO₃H, COR)other ring, C5 and C81-nitronaphthalene → 1,5- and 1,8-dinitro

Oxidation and reduction

ReagentProduct
O₂, V₂O₅, heat (industrial)phthalic anhydride (one ring destroyed)
CrO₃, AcOH1,4-naphthoquinone
Na, EtOH1,4-dihydronaphthalene
Birch (Li, NH₃, ROH)1,4-dihydronaphthalene
Na in boiling pentanol, or H₂/catalysttetralin; further H₂ gives decalin (cis/trans)

With a substituted naphthalene, oxidation destroys the more electron-rich ring: 1-nitronaphthalene gives 3-nitrophthalic acid, whereas 1-aminonaphthalene loses the ring bearing NH₂ and gives phthalic acid. This was historically used to locate substituents.

Reactions of Anthracene and Phenanthrene

Anthracene: the 9,10 positions

Reaction across C9 and C10 leaves two intact benzene rings, which costs far less resonance energy than disrupting a terminal ring.

ReactionProduct
Diels–Alder with maleic anhydride (anthracene as the diene)9,10-dihydro-9,10-ethanoanthracene-11,12-dicarboxylic anhydride (bridged adduct)
Br₂9,10-dibromo-9,10-dihydroanthracene, which loses HBr on warming to 9-bromoanthracene
CrO₃ / AcOH or HNO₃9,10-anthraquinone
Na / EtOH or Birch9,10-dihydroanthracene
Light (in solution)[4 + 4] photodimer across 9,10 and 9′,10′
Electrophiles (nitration, acylation)9-substituted (often via addition–elimination)

Benzyne adds across C9–C10 of anthracene to give triptycene, a classic aryne trap.

Phenanthrene: the C9–C10 bond

With two Clar sextets in the outer rings, the C9–C10 bond (Pauling order 4/5) behaves almost like a stilbene double bond.

ReactionProduct
Br₂ (CCl₄, cold)9,10-dibromo-9,10-dihydrophenanthrene (addition); 9-bromophenanthrene on heating
CrO₃ / AcOH9,10-phenanthrenequinone
O₃, then reductive or oxidative work-upbiphenyl-2,2′-dicarbaldehyde or diphenic acid (C9–C10 cleaved)
H₂ / catalyst (mild)9,10-dihydrophenanthrene
OsO₄cis-9,10-diol

Electrophilic substitution of phenanthrene gives mixtures, with C9 well represented; Part B questions focus on the addition and oxidation chemistry of C9–C10.

Memory Tricks

Don’t Confuse

ThisvsThat
Anthracene: linear, 4 Kekulé, 1 sextet, reacts at C9/C10Phenanthrene: angular, 5 Kekulé, 2 sextets, reacts at C9–C10 bond
Naphthalene-1-sulfonic acid: kinetic (about 80 °C)Naphthalene-2-sulfonic acid: thermodynamic (about 160 °C)
Birch: EDG on the double bondBirch: EWG on the sp³ carbon
Catalytic hydrogenation: all the way to cyclohexaneBirch: stops at the 1,4-diene
Dewar benzene (bicyclic, valence isomer)Dewar structures (minor resonance contributors of benzene)
Pauling bond order (from Kekulé counting)Coulson π bond order (from Hückel coefficients)

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. How many Kekulé structures do naphthalene and phenanthrene have?
  2. What is the main product of Birch reduction of anisole?
  3. At which positions does anthracene undergo Diels–Alder reaction with maleic anhydride?
Answers
  1. Naphthalene 3, phenanthrene 5.
  2. 1-Methoxycyclohexa-1,4-diene (the OMe stays on a double bond).
  3. C9 and C10 (the central ring), leaving two benzene rings intact.

Level 2: Part B Style

Practice Q1. Naphthalene is heated with concentrated H₂SO₄ at about 160 °C. The major product and the reason are:

(a) naphthalene-1-sulfonic acid; faster attack at C1 (b) naphthalene-2-sulfonic acid; reversible sulfonation and the peri strain of the 1-isomer (c) naphthalene-2-sulfonic acid; C2 is more electron-rich (d) naphthalene-1,5-disulfonic acid; deactivation of the first ring

Answer: (b)

At high temperature sulfonation equilibrates; the 1-isomer is destabilised by the SO₃H…H8 peri interaction, so the thermodynamic 2-isomer dominates. C1 is still attacked faster (kinetic), which is why (a) is the low-temperature answer, and (c) is false.

Practice Q2. The Pauling bond order (fraction of Kekulé structures in which the bond is double) of the C9–C10 bond in phenanthrene is:

(a) 1/2 (b) 2/3 (c) 3/4 (d) 4/5

Answer: (d)

Phenanthrene has 5 Kekulé structures; C9–C10 is double in 4 of them. (b) is C1–C2 of naphthalene and (c) is C1–C2 of anthracene.

Practice Q3. Phenanthrene reacts with bromine in CCl₄ at low temperature mainly by:

(a) substitution at C1 (b) addition across C9–C10 (c) addition across C1–C2 (d) no reaction

Answer: (b)

C9–C10 has high double-bond character (4/5) and addition there leaves two Clar sextets intact. The dibromide loses HBr on heating to give 9-bromophenanthrene.

Practice Q4. In the Haworth synthesis of naphthalene from benzene, the intermediate formed by intramolecular Friedel–Crafts acylation is:

(a) 3-benzoylpropanoic acid (b) 4-phenylbutanoic acid (c) 1-tetralone (d) tetralin

Answer: (c)

Benzene + succinic anhydride → 3-benzoylpropanoic acid (intermolecular acylation) → Clemmensen → 4-phenylbutanoic acid → intramolecular acylation → 1-tetralone → reduction → tetralin → dehydrogenation → naphthalene.

Level 3: Part C Style

Practice Q5. Exhaustive ozonolysis (reductive work-up) of a trimethylbenzene gives glyoxal, methylglyoxal and biacetyl in the ratio 1 : 1 : 1. A second trimethylbenzene gives only methylglyoxal. Which statements are correct?

  1. The first compound is 1,2,3-trimethylbenzene.
  2. The second compound is 1,3,5-trimethylbenzene.
  3. Both results prove that benzene is a resonance hybrid of two Kekulé structures.
  4. o-Xylene would give glyoxal : methylglyoxal : biacetyl = 3 : 2 : 1.

(a) 1, 2 and 4 only (b) 1, 2, 3 and 4 (c) 2 and 4 only (d) 1 and 3 only

Answer: (a)
  • 1,2,3-Trimethylbenzene: with C1=C2, C3=C4, C5=C6 double, the fragments C1–C2, C3–C4, C5–C6 are biacetyl, methylglyoxal and glyoxal; the other Kekulé structure (C2=C3, C4=C5, C6=C1) gives biacetyl (C2–C3), glyoxal (C4–C5) and methylglyoxal (C6–C1), the same three. Total 1 : 1 : 1. 1 correct.
  • Mesitylene: every two-carbon fragment carries exactly one methyl in both structures → only methylglyoxal. 2 correct.
  • 3 wrong: in both compounds the two Kekulé structures give identical product sets, so the results cannot distinguish a single Kekulé structure from a hybrid.
  • o-Xylene: A gives 2 methylglyoxal + 1 glyoxal; B gives 1 biacetyl + 2 glyoxal; sum 3 : 2 : 1. 4 correct.

Practice Q6. Compound X (C₁₀H₁₀O) is formed by cyclising 4-phenylbutanoic acid. X is treated with CH₃MgBr, then the product is heated with Pd/C. Which product and which reasoning are correct?

(a) 1-Methylnaphthalene; the tertiary alcohol dehydrates and the dihydronaphthalene is dehydrogenated. (b) 2-Methylnaphthalene; methyl migrates during aromatisation. (c) 1-Methyltetralin; Pd/C hydrogenates the alkene only. (d) Naphthalene; the methyl group is lost on dehydrogenation.

Answer: (a)

X is 1-tetralone (C₁₀H₁₀O), from intramolecular Friedel–Crafts acylation. Then: 1-tetralone + CH₃MgBr → 1-methyl-1,2,3,4-tetrahydronaphthalen-1-ol → dehydration (often under the heating conditions) → 4-methyl-1,2-dihydronaphthalene → Pd/C dehydrogenation → 1-methylnaphthalene. No migration is needed, and the methyl group is retained because C–C bonds are not cleaved under these conditions.

Practice Q7. Using Hückel delocalisation energies (anthracene \( 5.314\beta \), phenanthrene \( 5.448\beta \)) and taking \( \beta = -75 \) kJ mol⁻¹ as a rough empirical value, estimate the extra stabilisation of phenanthrene over anthracene, and choose the consistent statement.

(a) about 10 kJ mol⁻¹; phenanthrene more stable, consistent with its two Clar sextets (b) about 10 kJ mol⁻¹; anthracene more stable, consistent with its linear shape (c) about 40 kJ mol⁻¹; phenanthrene more stable (d) zero; isomers have identical Hückel energies

Answer: (a)

\( \Delta = (5.448 - 5.314) \times 75 = 0.134 \times 75 \approx 10 \) kJ mol⁻¹, in favour of phenanthrene. Hückel energies depend on connectivity, so isomers differ, ruling out (d). The estimate is crude because \( \beta \) depends on which property it is fitted to, but the direction agrees with Clar’s rule and with thermochemistry.

Quick Revision Table

IdeaFact
BenzeneD₆h, C–C 1.39–1.40 Å, RE about 151 kJ mol⁻¹, δ 7.3, MOs \( a_{2u} < e_{1g} < e_{2u} < b_{2g} \)
Valence isomersDewar benzene, benzvalene, prismane
o-Xylene ozonolysisglyoxal : methylglyoxal : biacetyl = 3 : 2 : 1
Kekulé counts2, 3, 4, 5 (benzene, naphthalene, anthracene, phenanthrene); pyrene 6; triphenylene 9
Clar sextetsnaphthalene 1, anthracene 1, phenanthrene 2, triphenylene 3
Classical RE36, 61, 84, 92 kcal mol⁻¹ (benzene, naphthalene, anthracene, phenanthrene)
Synthesescyclotrimerisation; dehydrogenation; Haworth; anthraquinone; Elbs; Pschorr; Bardhan–Sengupta; Mallory
Benzene reactionsSEAr via arenium ion; Birch → 1,4-diene; side-chain oxidation needs benzylic H
NaphthaleneC1 kinetic; C2 at 160 °C sulfonation and in nitrobenzene acylation; oxidation → phthalic anhydride
Anthracene9,10: Diels–Alder, Br₂, anthraquinone, photodimer, triptycene with benzyne
PhenanthreneC9–C10: Br₂ addition, quinone, ozonolysis to diphenic acid

Key Takeaways

What’s Next