Skip to content

Chiral Auxiliaries

CSIR NET asymmetric synthesis: Evans oxazolidinones, Oppolzer sultam, SAMP/RAMP, Myers, Ellman sulfinamide, 8-phenylmenthol, Seebach SRS, auxiliary arithmetic.

  • 15 min read
  • Updated
On this page · 17 sections
  1. Prerequisites
  2. The Hook: Borrowing Chirality and Giving It Back
  3. The Auxiliary Strategy
  4. Evans Oxazolidinones
  5. Oppolzer’s Camphorsultam
  6. Enders’ SAMP and RAMP Hydrazones
  7. Myers’ Pseudoephedrine Amides
  8. Ellman’s tert-Butanesulfinamide
  9. Other Classic Auxiliaries
  10. Auxiliary Arithmetic
  11. Memory Tricks
  12. Don’t Confuse
  13. Common Mistakes
  14. Practice
  15. Quick Revision Table
  16. Key Takeaways
  17. What’s Next

Prerequisites

The Hook: Borrowing Chirality and Giving It Back

The Auxiliary Strategy

Chiral auxiliary
An enantiopure chiral group that is covalently attached to an achiral substrate, controls the stereochemistry of one or more bond-forming steps through diastereomeric transition states, and is then removed (ideally recovered) without racemising the new stereocentre.
graph LR
    A["Achiral substrate
(e.g. acyl chloride)"] -->|"1. attach"| B["Substrate–auxiliary
conjugate"] B -->|"2. diastereoselective
reaction"| C["Diastereomers
major + minor"] C -->|"3. purify
(chromatography,
crystallisation)"| D["Single diastereomer"] D -->|"4. cleave"| E["Enantiopure product"] D -->|"4. cleave"| F["Recovered auxiliary"] F -.->|"recycle"| A

What makes a good auxiliary

RequirementWhy
Both enantiomers cheaply available (often from the chiral pool)gives access to either product enantiomer
Easy, high-yielding attachmentadds a step to every synthesis
High and predictable diastereoselectivitythe main reason for using an auxiliary
Crystalline or chromatographically separable diastereomersallows upgrade to > 99:1 before cleavage
Mild, non-racemising cleavage to several functional groupsacids, esters, alcohols, aldehydes, ketones, amines
Recoverable without loss of eeeconomy

Why auxiliaries remain useful despite catalysis

  • The key step gives diastereomers, which can be separated on ordinary silica or by crystallisation, so the final ee can exceed the intrinsic selectivity.
  • The selectivity is reliable across many substrates, so auxiliaries are often the first choice in early-stage or complex synthesis.
  • The cost is two extra steps and a stoichiometric amount of chiral material.

Evans Oxazolidinones

Structure and origin

4-Substituted oxazolidin-2-ones are made from enantiopure 1,2-amino alcohols, which come from amino acids by reduction:

  • (S)-4-benzyloxazolidin-2-one from (S)-phenylalaninol (L-phenylalanine).
  • (S)-4-isopropyloxazolidin-2-one from (S)-valinol (L-valine).
  • Norephedrine-derived 4-methyl-5-phenyl oxazolidinones provide the opposite sense of induction in many reactions.

Attachment: deprotonation of the oxazolidinone NH (n-BuLi) and acylation with an acyl chloride gives the N-acyloxazolidinone (an imide).

Alkylation

  1. LDA or NaHMDS at −78 °C deprotonates the α-carbon. The imide gives the (Z)-enolate selectively (the alternative E geometry suffers strain between the α-substituent and the ring).
  2. The metal (Li or Na) chelates the enolate oxygen and the oxazolidinone carbonyl oxygen, holding the ring coplanar with the enolate.
  3. The C4 substituent (benzyl or isopropyl) projects over one face; the electrophile (alkyl halide) approaches from the opposite face.
  4. The product is obtained with high dr (reactive electrophiles such as allyl and benzyl halides give the best results).

The Evans aldol

  1. Bu₂BOTf and a hindered amine (i-Pr₂NEt or Et₃N) give the (Z)-boron enolate.
  2. The boron already carries two butyl groups and the enolate oxygen, and the incoming aldehyde takes the last coordination site, so boron cannot also chelate the oxazolidinone carbonyl. The auxiliary instead rotates to place its C=O dipole opposed to the enolate C–O dipole (dipole minimisation).
  3. A Zimmerman–Traxler chair with the (Z)-enolate gives the syn aldol (simple diastereoselectivity), and the C4 substituent selects one of the two syn enantiomers: the “Evans syn” product (induced diastereoselectivity).
  4. Changing to conditions where the auxiliary carbonyl can bind the metal (for example certain titanium enolates with extra Lewis acid or with a thione analogue of the auxiliary) can reverse the facial selectivity and give the other syn diastereomer, called “non-Evans syn”.

Cleavage of the Evans auxiliary

ReagentProductComment
LiOH / H₂O₂ (LiOOH)carboxylic acidhydroperoxide attacks the exocyclic (acyl) carbonyl selectively, avoiding ring opening
LiBH₄ (or LiAlH₄)primary alcoholreductive cleavage
LiOBn or NaOMe / MeOHbenzyl or methyl estertransesterification
MeNH(OMe)·HCl with AlMe₃Weinreb amidethen ketones or aldehydes

In each case the oxazolidinone is released and can be reused. Plain LiOH tends to attack the ring carbonyl (endocyclic cleavage) and destroy the auxiliary, which is why the hydroperoxide is used.

Oppolzer’s Camphorsultam

  • A bicyclic sulfonamide (bornane-10,2-sultam) made from camphor (via camphorsulfonic acid); both enantiomers are available.
  • N-Acyl sultams undergo diastereoselective alkylation, aldol, conjugate addition and Diels–Alder reactions (N-acryloyl and N-crotonoyl sultams with Lewis acids).
  • The rigid bicyclic skeleton and the sulfonyl oxygens block one face of the attached enolate or alkene.
  • Products are often highly crystalline, so the dr can be upgraded by recrystallisation.
  • Cleavage: LiOH/H₂O₂ (acids), LiAlH₄ (alcohols), transesterification.

Enders’ SAMP and RAMP Hydrazones

  • SAMP = (S)-1-amino-2-(methoxymethyl)pyrrolidine, made from (S)-proline; RAMP is its enantiomer.
  • Attach: condense SAMP with a ketone or aldehyde to give the chiral hydrazone.
  • React: LDA deprotonates α to the C=N to give an azaenolate; lithium is chelated by the methoxy oxygen, which fixes the geometry and blocks one face. Alkylation with an alkyl halide occurs from the open face.
  • Remove: ozonolysis, or methylation (MeI) to the hydrazonium salt followed by mild acid hydrolysis, regenerates the carbonyl compound, now α-alkylated with high ee.
  • Use: asymmetric α-alkylation of ketones and aldehydes, a reaction that is hard to do catalytically. SAMP and RAMP give opposite enantiomers.

Myers’ Pseudoephedrine Amides

  • Pseudoephedrine (both enantiomers inexpensive) is acylated on nitrogen to give a tertiary amide.
  • LDA with excess LiCl forms the enolate (the hydroxyl is deprotonated too, as an alkoxide). Alkylation with primary alkyl halides is highly diastereoselective, even with unactivated electrophiles.
  • Cleavage gives carboxylic acids (acidic or basic hydrolysis), primary alcohols (reduction with a lithium amidotrihydroborate reagent), aldehydes (reduction with a milder hydride) or ketones (organolithium addition).
  • Products are often crystalline.

Ellman’s tert-Butanesulfinamide

  • (R)- or (S)-2-methylpropane-2-sulfinamide, t-BuS(O)NH₂, is chiral at sulfur (a stereogenic sulfur with a lone pair as the fourth “group”).
  • Attach: condensation with aldehydes or ketones (with Ti(OEt)₄ or CuSO₄ as dehydrating Lewis acid) gives N-sulfinyl imines.
  • React: organometallic reagents (Grignard, organolithium), enolates, hydride donors add to the C=N diastereoselectively; the sulfinyl group activates the imine and directs the nucleophile.
  • Remove: HCl in methanol (or dioxane) cleaves the N–S bond to give the amine hydrochloride.
  • Use: the most widely used route to enantiopure α-branched primary amines, including α-tertiary amines from ketimines.

Other Classic Auxiliaries

AuxiliaryOriginMain useControl element
8-Phenylmenthol (Corey) and trans-2-phenylcyclohexanol (Whitesell)menthol / syntheticDiels–Alder of acrylates, ene reactions, conjugate additionsthe phenyl ring stacks over one face of the attached acrylate
Menthyl esters, (−)-menthyl sulfinate (Andersen)mentholchiral sulfoxide synthesis (substitution at S with inversion)diastereomeric sulfinates separated by crystallisation
Meyers’ chiral oxazolinesamino alcoholsα-alkylation of carboxylic acid equivalents; asymmetric additions to aromatic ringschelated metalloenamine
Chiral acetals (from tartrate-derived or other C₂-symmetric diols)tartaric acid etc.Lewis-acid-promoted additions to acetals; cyclopropanationone acetal C–O bond is selectively cleaved

Self-regeneration of stereocentres (Seebach)

A special auxiliary-like strategy for making α,α-disubstituted amino acids and hydroxy acids with retention of configuration:

  1. Condense an enantiopure α-amino or α-hydroxy acid with pivalaldehyde to form a cyclic acetal (an oxazolidinone or dioxolanone). This creates a new, temporary stereocentre at the acetal carbon, formed diastereoselectively (tert-butyl cis or trans to the existing α-substituent).
  2. Form the enolate. The original α-stereocentre is destroyed (it is now trigonal), but the temporary acetal stereocentre remains and its tert-butyl group shields one face.
  3. Alkylate from the face opposite the tert-butyl group.
  4. Hydrolyse the acetal. The α-carbon now carries a new substituent, and its configuration has been “regenerated” by the temporary centre. No external chiral auxiliary was used: the original stereocentre was its own auxiliary.

Auxiliary Arithmetic

Overall yield

Three steps (attach, react, cleave) each lose material. With 90%, 85% and 92%:

$$\text{overall} = 0.90 \times 0.85 \times 0.92 = 0.704 \;(70\%)$$

Diastereoselectivity becomes enantioselectivity

  • If the diastereomers are not separated before cleavage, ee(product) = de(key step), assuming no racemisation on cleavage. A 95:5 dr becomes 90% ee.
  • If the major diastereomer is purified, ee(product) is limited only by the purity of the isolated diastereomer and the ee of the auxiliary itself.

The auxiliary’s own ee is the ceiling

An auxiliary of ee \( a \) contains a small amount of its enantiomer. That wrong-handed auxiliary produces the enantiomer of every product that the main auxiliary makes. Enantiomers co-elute on achiral silica, so chromatography cannot remove them.

  • Without purification: \( \text{ee}_{\text{product}} = a \times \text{de} \). For a = 99% and dr 98:2 (de 96%): 0.99 × 0.96 = 95.0% ee.
  • After complete removal of the minor diastereomer: \( \text{ee}_{\text{product}} = a \) = 99% ee.

Check: the major product enantiomer forms as 0.995 × 0.98 (from the correct auxiliary, major pathway) + 0.005 × 0.02 (from the wrong auxiliary, minor pathway) = 0.9752, so ee = 2 × 0.9752 − 1 = 0.9504.

Racemisation on cleavage

If the new stereocentre is α to a carbonyl group, harsh basic cleavage can epimerise it through the enolate. The mild cleavage conditions (LiOOH at 0 °C, LiBH₄) were chosen to avoid this; a question that offers “refluxing NaOH” as the cleavage step for an α-stereocentre is suggesting a loss of ee.

Memory Tricks

Don’t Confuse

ThisIs not this
Chiral auxiliary: covalently attached, stoichiometric, removedChiral ligand / catalyst: not incorporated, catalytic
Diastereoselective step (auxiliary attached)Enantioselective outcome (after removal)
Evans syn (boron, dipole-minimised)non-Evans syn (chelated metal enolate)
SAMP (S, from (S)-proline)RAMP (R, its enantiomer); opposite products
LiOOH cleavage (exocyclic, keeps auxiliary)LiOH cleavage (can attack the ring carbonyl)
Seebach SRS: original centre is its own auxiliaryChiral pool: chiral starting material retained throughout
Ellman sulfinamide: stereogenic SEvans oxazolidinone: stereogenic C4

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not taken from any CSIR NET paper.

Level 1: Foundation

  1. From which natural source is SAMP prepared?
  2. Which reagent combination generates the (Z)-boron enolate of an N-propionyl oxazolidinone?
  3. What reagent removes an Ellman sulfinyl group from an amine?
Answers
  1. (S)-Proline.
  2. Bu₂BOTf with i-Pr₂NEt (or Et₃N).
  3. HCl in methanol (or dioxane), giving the amine hydrochloride.

Level 2: Part B Style

Practice Q1. An N-propionyl-(S)-4-benzyloxazolidin-2-one is treated with NaHMDS at −78 °C and then allyl iodide. The stereochemical outcome is controlled mainly by

(a) the configuration of allyl iodide (b) a chelated (Z)-enolate whose face is shielded by the benzyl group (c) an (E)-enolate attacked from the face of the benzyl group (d) thermodynamic equilibration of the product

Answer: (b)

The imide forms the (Z)-enolate, sodium chelates the two oxygens, and the electrophile enters anti to the C4 benzyl group. Allyl iodide is achiral.

Practice Q2. Which cleavage converts an N-acyloxazolidinone into a carboxylic acid while preserving the auxiliary?

(a) LiOH / H₂O₂ (b) LiAlH₄ (c) MeMgBr (d) H₂ / Pd–C

Answer: (a)

Lithium hydroperoxide attacks the exocyclic carbonyl; the peracid is reduced in work-up to give the acid. LiAlH₄ gives the alcohol.

Practice Q3. The sequence (i) cyclohexanone + SAMP; (ii) LDA; (iii) MeI; (iv) O₃ gives

(a) racemic 2-methylcyclohexanone (b) 2-methylcyclohexanone enriched in one enantiomer (c) 2,6-dimethylcyclohexanone as a meso compound (d) the N-methylhydrazonium salt as the final product

Answer: (b)

Enders alkylation: chiral hydrazone, chelated azaenolate, face-selective methylation, ozonolytic cleavage to the α-methyl ketone with high ee.

Practice Q4. In Seebach’s self-regeneration of stereocentres, the stereocentre that controls the alkylation step is

(a) the original α-carbon of the amino acid (b) the acetal carbon bearing the tert-butyl group (c) a stereocentre in an external chiral base (d) none; the reaction is racemic

Answer: (b)

The α-carbon becomes trigonal in the enolate. The temporary acetal stereocentre, created from the original one, directs the electrophile.

Level 3: Part C Style

Practice Q5. An auxiliary of 99% ee is attached to an achiral acid in 90% yield. Alkylation gives a 98:2 mixture of diastereomers in 85% yield. Cleavage proceeds in 92% yield without racemisation.

Which statements are correct?

  1. The overall yield over the three steps is about 70%.
  2. If the crude alkylation product is cleaved without purification, the product ee is about 95%.
  3. If the minor diastereomer is removed completely by silica chromatography before cleavage, the product ee is 99%.
  4. Repeated chromatography on silica can raise the product ee above 99%.

(a) 1, 2 and 3 only (b) 1 and 3 only (c) 2 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  1. Correct. 0.90 × 0.85 × 0.92 = 0.704.
  2. Correct. ee = a × de = 0.99 × 0.96 = 0.950.
  3. Correct. Removing the minor diastereomer leaves the desired diastereomer together with its enantiomer (from the 0.5% wrong-handed auxiliary), so ee = 99%.
  4. Wrong. The contaminant is the enantiomer of the desired adduct; it co-elutes on an achiral phase.

Practice Q6. An N-propionyl oxazolidinone is converted (i) with Bu₂BOTf/i-Pr₂NEt then isobutyraldehyde, and separately (ii) under a titanium protocol in which the auxiliary carbonyl coordinates the metal. The two experiments give different major syn aldol diastereomers. Which statements are correct?

  1. Both experiments use a (Z)-enolate, which is why both give syn products.
  2. In (i) the boron enolate cannot chelate, and the auxiliary adopts a dipole-minimised orientation.
  3. In (ii) chelation rotates the auxiliary, exposing the opposite enolate face, giving the “non-Evans syn” product.
  4. The two syn products are enantiomers, so they cannot be separated before cleavage.

(a) 1, 2 and 3 only (b) 2 and 3 only (c) 1 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  1. Correct. Z-enolate + chair gives syn in both.
  2. Correct. Dialkylboron has no spare valence for chelation.
  3. Correct. Chelated versus non-chelated auxiliary orientation presents opposite faces.
  4. Wrong. With the auxiliary attached, the two syn adducts are diastereomers (the auxiliary has the same configuration in both). They are separable; only after cleavage do they become enantiomers.

Practice Q7. Which statements about Ellman’s tert-butanesulfinamide are correct?

  1. The sulfur atom is a stereocentre.
  2. Condensation with an aldehyde requires a dehydrating Lewis acid such as Ti(OEt)₄ or CuSO₄.
  3. Grignard addition to the N-sulfinyl aldimine gives diastereomeric sulfinamides that can be separated before deprotection.
  4. Removal of the sulfinyl group requires hydrogenolysis over palladium.

(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  1. Correct. t-Bu, O, NH₂ and the lone pair around S.
  2. Correct. These promote imine formation and remove water.
  3. Correct. The auxiliary is attached, so the products are diastereomers.
  4. Wrong. Mild acid (HCl/MeOH) cleaves the N–S bond.

Quick Revision Table

AuxiliarySourceKey reactionRemoval
Evans oxazolidinoneamino acids (valinol, phenylalaninol), norephedrinealkylation (chelated Z-enolate); boron aldol (Evans syn)LiOOH (acid), LiBH₄ (alcohol), alkoxide (ester), Weinreb amide
Oppolzer camphorsultamcamphoralkylation, aldol, Diels–Alder, conjugate additionLiOOH, LiAlH₄, transesterification
SAMP / RAMP(S)-proline / enantiomerα-alkylation of ketones, aldehydesO₃ or MeI then H₃O⁺
Myers pseudoephedrinepseudoephedrineamide enolate alkylation (LDA, LiCl)hydrolysis, reduction, RLi
Ellman sulfinamidesynthetic, S-stereogenicadditions to N-sulfinyl iminesHCl / MeOH
8-PhenylmentholmentholDiels–Alder, eneester hydrolysis or reduction
Seebach SRSthe substrate itselfα-alkylation with retentionacetal hydrolysis
Arithmeticee = a × de (crude); ee = a (purified); overall yield = product of step yields

Key Takeaways

What’s Next

Advertisement
Advertisement