Skip to content

Metal–Metal Multiple Bonds and Halide Clusters

CSIR NET chemistry: σ, π and δ bonds, [Re₂Cl₈]²⁻ quadruple bond, bond orders from d counts, Re₃, Mo₆ and Nb₆ halide clusters, Chevrel phases, Fe–S clusters.

  • 15 min read
  • Updated
On this page · 14 sections
  1. Prerequisites
  2. The Hook: A Blue Salt With an Impossible Conformation
  3. σ, π and δ Bonds From d Orbitals
  4. Bond Orders From d-Electron Counts
  5. Trinuclear Clusters: Re₃Cl₉
  6. Hexanuclear Halide Clusters
  7. Iron–Sulfur Clusters
  8. Memory Tricks
  9. Don’t Confuse
  10. Common Mistakes
  11. Practice
  12. Quick Revision Table
  13. Key Takeaways
  14. What’s Next

Prerequisites

The Hook: A Blue Salt With an Impossible Conformation

σ, π and δ Bonds From d Orbitals

Take the M–M axis as z. In a square-planar MX₄ unit the four ligands lie along ±x and ±y; the \( d_{x^2-y^2} \) orbital is used for M–L σ bonding (together with s, p_x, p_y). The remaining four d orbitals on each metal overlap with the matching orbital on the other metal:

d orbitalsOverlapBond typeNodal planes containing the M–M axisOverlap strength
\( d_{z^2} \) + \( d_{z^2} \)head-onσ0largest
\( d_{xz} \) + \( d_{xz} \), \( d_{yz} \) + \( d_{yz} \)side-onπ (two, degenerate)1intermediate
\( d_{xy} \) + \( d_{xy} \)face-to-face, four lobesδ2smallest

Each pair gives a bonding and an antibonding combination. The approximate energy order is

$$\sigma < \pi < \delta < \delta^* < \pi^* < \sigma^*$$$$\boxed{\text{bond order} = \frac{(\text{bonding electrons}) - (\text{antibonding electrons})}{2}}$$

Why the δ bond needs eclipsing

The four lobes of \( d_{xy} \) on one metal line up with the four lobes on the other only when the two MX₄ squares are eclipsed (torsion angle 0°). Rotating one square by 45° makes the overlap exactly zero by symmetry. σ and π overlap are cylindrically symmetric overall and do not care about rotation. So:

  • δ² (bond order 4, net δ bond): eclipsed, despite steric cost.
  • δ²δ*² (no net δ bond): no electronic preference; sterics take over and staggered or intermediate conformations appear.

Bond Orders From d-Electron Counts

Work out the oxidation state of each metal, take its dⁿ count, add the two, and fill the M–M orbitals in the order above.

CompoundMetal ox. stated electrons (total)ConfigurationBond orderConformation / note
[Re₂Cl₈]²⁻Re(III), d⁴8σ²π⁴δ²4eclipsed, diamagnetic
[Mo₂Cl₈]⁴⁻Mo(II), d⁴8σ²π⁴δ²4eclipsed
Mo₂(O₂CCH₃)₄Mo(II), d⁴8σ²π⁴δ²4four bridging acetates
Cr₂(O₂CCH₃)₄(H₂O)₂Cr(II), d⁴8σ²π⁴δ²4formally; Cr–Cr long and very sensitive to axial ligands
[Mo₂(SO₄)₄]³⁻Mo(+2.5)7σ²π⁴δ¹3.5one unpaired electron
[Tc₂Cl₈]³⁻Tc(+2.5)9σ²π⁴δ²δ*¹3.5one unpaired electron
[Re₂Cl₄(PMe₂Ph)₄]⁺Re(+2.5)9σ²π⁴δ²δ*¹3.5
Re₂Cl₄(PMe₂Ph)₄Re(II), d⁵10σ²π⁴δ²δ*²3electron-rich triple bond
[Os₂Cl₈]²⁻Os(III), d⁵10σ²π⁴δ²δ*²3staggered
Mo₂(NMe₂)₆, W₂(NMe₂)₆M(III), d³6σ²π⁴3ethane-like, staggered; no δ electrons
Ru₂(O₂CCH₃)₄ClRu(+2.5)11σ²π⁴δ²(π*δ*)³2.5three unpaired electrons (π* and δ* nearly degenerate)
Rh₂(O₂CCH₃)₄Rh(II), d⁷14σ²π⁴δ²δ*²π*⁴1single bond; axial sites bind donors

The δ → δ* transition

The δ–δ* gap is small, so the lowest-energy electronic transition of a quadruply bonded δ² compound is δ → δ*, in the visible region. It is responsible for the blue colour of [Re₂Cl₈]²⁻ salts, and its polarisation is along the M–M axis.

Quintuple bonds

If each metal carries only one ligand, \( d_{x^2-y^2} \) is also free for M–M bonding and a second δ bond can form. Power’s compound Ar’CrCrAr’ (Ar’ a very bulky terphenyl group, each Cr(I) d⁵) has the configuration σ²π⁴δ⁴: a formal quintuple bond with a very short Cr–Cr distance.

Evidence for metal–metal bonds

EvidenceWhat it shows
M–M distance shorter than in the bulk metalstrong direct bonding (for comparable ligand sets)
Diamagnetism (or reduced paramagnetism)d electrons paired in M–M orbitals
Eclipsed conformation against stericsδ bonding
Low-energy visible bandδ → δ*
Raman-active ν(M–M)M–M stretching vibration
Redox changes in bond order with matching changes in magnetismorbital-by-orbital filling

Trinuclear Clusters: Re₃Cl₉

ReCl₃ is really built from Re₃ triangles with one chloride bridging each edge (three μ₂-Cl, in the Re₃ plane). The anion [Re₃Cl₁₂]³⁻ shows the core clearly: three μ₂-Cl, three in-plane terminal Cl pointing outward, and six terminal Cl above and below the plane (two per Re). In solid Re₃Cl₉ the in-plane outward positions are occupied by chloride bridges to neighbouring clusters.

Count: Re(III), d⁴. Three Re give 12 metal electrons = 6 pairs, shared among 3 edges: Re=Re double bonds (σ + π along each edge), diamagnetic. The cluster survives intact in solution and in many substitution reactions.

Hexanuclear Halide Clusters

Two structural types dominate:

TypeExampleMetal coreHalide positionsOuter ligands
[M₆X₈]⁴⁺Mo, W (e.g. [Mo₆Cl₈]⁴⁺)octahedron8 face-capping μ₃-X (a cube of halides)6 terminal, one per metal
[M₆X₁₂]ⁿ⁺Nb, Ta (e.g. [Nb₆Cl₁₂]²⁺)octahedron12 edge-bridging μ₂-X (a cuboctahedron)6 terminal, one per metal

[Mo₆Cl₈]⁴⁺: one electron pair per edge

“MoCl₂” is [Mo₆Cl₈]Cl₄: the cluster cations are linked through bridging and terminal chlorides. With six chlorides added the discrete anion is [Mo₆Cl₁₄]²⁻ = [Mo₆Cl₈]Cl₆²⁻.

Count: Mo(II), d⁴; 6 × 4 = 24 metal electrons = 12 pairs, one for each of the 12 edges of the octahedron. Each Mo–Mo edge is a 2c–2e single bond (bond order 1), and every Mo has a share in four of them. W₆ halide clusters (“WCl₂”) are the same.

[Nb₆Cl₁₂]ⁿ⁺: delocalised, fractional bonds

Nb₆Cl₁₄ is [Nb₆Cl₁₂]Cl₂ (with extra chlorides linking clusters in the solid). In [Nb₆Cl₁₂]²⁺ the metal oxidation-state sum is 12 + 2 = 14:

$$\text{metal electrons} = 6 \times 5 - 14 = 16 = 8 \text{ pairs}$$

Eight pairs for twelve edges gives a bond order of 8/12 = 2/3 per edge. Equivalently, the eight bonding MOs can be pictured as 3c–2e bonds over the eight faces of the octahedron.

Cluster ionMetal electronsSpin
[Nb₆Cl₁₂]²⁺16diamagnetic
[Nb₆Cl₁₂]³⁺15one unpaired electron
[Nb₆Cl₁₂]⁴⁺14diamagnetic

The clusters can be oxidised step by step while keeping the Nb₆ core, which is how the delocalised orbital picture was confirmed.

Chevrel phases

The Chevrel phases MₓMo₆X₈ (X = S, Se, Te; M = Pb, Sn, Cu, a lanthanide and others) contain Mo₆X₈ units like the [Mo₆Cl₈]⁴⁺ core, with chalcogenides capping the faces and linking neighbouring clusters.

  • In binary Mo₆S₈ the Mo oxidation-state sum is 16, so the cluster has 36 − 16 = 20 electrons, four short of the 24 that fill all Mo–Mo bonding orbitals.
  • The ternary metal donates electrons: in PbMo₆S₈ the cluster is [Mo₆S₈]²⁻ with 22 electrons.
  • Partly filled cluster bands make the Chevrel phases metallic; several (PbMo₆S₈ is the best-known) are superconductors that stay superconducting in very high magnetic fields.

Iron–Sulfur Clusters

The commonest biological clusters are small cages of iron and sulfide held by cysteine thiolates:

ClusterStructureCommon oxidation levels
[2Fe–2S]rhomb, two μ₂-S[Fe₂S₂]²⁺/⁺
[3Fe–4S]cubane missing one Fe[Fe₃S₄]⁺/⁰
[4Fe–4S]cubane: Fe₄ and S₄ interpenetrating tetrahedra[Fe₄S₄]³⁺/²⁺ (HiPIP), [Fe₄S₄]²⁺/⁺ (ferredoxins)

Synthetic analogues such as [Fe₄S₄(SPh)₄]²⁻ (Holm) self-assemble from an iron salt, thiolate and sulfide. The iron–molybdenum cofactor of nitrogenase, MoFe₇S₉C, combines two cubane-like halves around a central carbide, an interstitial atom in a biological cluster.

Memory Tricks

Don’t Confuse

ThisvsThat
[Re₂Cl₈]²⁻: Re(III), BO 4, eclipsed[Os₂Cl₈]²⁻: Os(III), BO 3, staggered
δ bond (\( d_{xy} \), 2 nodal planes)π bond (\( d_{xz}, d_{yz} \), 1 nodal plane)
Mo₂(NMe₂)₆: σ²π⁴, BO 3Re₂Cl₄(PR₃)₄: σ²π⁴δ²δ*², BO 3
[Mo₆Cl₈]⁴⁺: 8 μ₃-Cl, 24 e⁻, BO 1[Nb₆Cl₁₂]²⁺: 12 μ₂-Cl, 16 e⁻, BO 2/3
Re₃Cl₉: Re=Re double bondsOs₃(CO)₁₂: Os–Os single bonds (low-valent)
Rh₂(OAc)₄: BO 1, diamagneticRu₂(OAc)₄Cl: BO 2.5, three unpaired
HiPIP [Fe₄S₄]³⁺/²⁺ferredoxin [Fe₄S₄]²⁺/⁺

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Which d orbital forms the δ bond in [Re₂Cl₈]²⁻ (M–M along z)?
  2. What is the Mo–Mo bond order in Mo₂(O₂CCH₃)₄?
  3. How many electrons are available for Mo–Mo bonding in [Mo₆Cl₈]⁴⁺?
Answers
  1. \( d_{xy} \) (the \( d_{x^2-y^2} \) orbital points at the ligands).
  2. Mo(II), d⁴ + d⁴ = 8: σ²π⁴δ², bond order 4.
  3. 6 × 4 = 24 (Mo(II), d⁴): 12 pairs for 12 edges.

Level 2: Part B Style

Practice Q1. The metal–metal bond order in [Os₂Cl₈]²⁻ is:

(a) 4 (b) 3.5 (c) 3 (d) 2

Answer: (c)

Os(III) is d⁵; 10 electrons: σ²π⁴δ²δ*², bond order (8 − 2)/2 = 3. With no net δ bond the anion is staggered.

Practice Q2. Which dimetal tetracarboxylate is paramagnetic?

(a) Mo₂(O₂CCH₃)₄ (b) Rh₂(O₂CCH₃)₄ (c) Ru₂(O₂CCH₃)₄Cl (d) Cr₂(O₂CCH₃)₄(H₂O)₂

Answer: (c)

Ru(+2.5): 11 electrons, σ²π⁴δ²(π*δ*)³ with three unpaired electrons. Mo₂ and Cr₂ (8 electrons each, σ²π⁴δ²) and Rh₂ (14 electrons, σ²π⁴δ²δ*²π*⁴) have every M–M orbital doubly occupied or empty, so they are diamagnetic.

Practice Q3. In the [Nb₆Cl₁₂]²⁺ cluster, the chloride ligands are:

(a) eight face-capping μ₃-Cl (b) twelve edge-bridging μ₂-Cl (c) six terminal and six edge-bridging (d) twelve terminal

Answer: (b)

The [M₆X₁₂] type has twelve edge-bridging halides (a cuboctahedron round the Nb₆ octahedron). Face-capping μ₃-X (a) is the [Mo₆Cl₈]⁴⁺ type.

Practice Q4. The average oxidation state of iron in the reduced [Fe₄S₄]⁺ core of a ferredoxin is:

(a) +2.75 (b) +2.5 (c) +2.25 (d) +2.0

Answer: (c)

Four S²⁻ = −8; total Fe = 8 + 1 = +9; average +9/4 = +2.25 (formally 1 Fe(III) + 3 Fe(II)).

Level 3: Part C Style

Practice Q5. The complex [Re₂Cl₄(PMe₂Ph)₄]ⁿ⁺ is studied for n = 0, 1 and 2. Which statements are correct?

  1. Bond orders are 3, 3.5 and 4 for n = 0, 1 and 2.
  2. Only the n = 1 species is paramagnetic.
  3. The n = 2 species has an electronic preference for the eclipsed conformation; the n = 0 species does not.
  4. Going from n = 0 to n = 2 removes electrons from π* orbitals.

(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only

Re oxidation states: +2, +2.5, +3; metal electrons 10, 9, 8. Configurations σ²π⁴δ²δ*², σ²π⁴δ²δ*¹, σ²π⁴δ²: bond orders 3, 3.5, 4 (1 correct). Only the 9-electron species has an unpaired electron (2 correct). The δ² species (n = 2) has a net δ bond and prefers eclipsing; δ²δ*² does not (3 correct). The electrons removed come from δ*, not π* (4 wrong).

Practice Q6. For a series of octahedral halide clusters, the number of metal electrons (m) is related to the average M–M bond order per edge by BO = (m/2)/12, assuming all metal electrons are in bonding orbitals. Which is the correct set of bond orders for [Mo₆Cl₈]⁴⁺, [Nb₆Cl₁₂]²⁺ and [Nb₆Cl₁₂]⁴⁺?

(a) 1, 0.667, 0.583 (b) 1, 0.75, 0.667 (c) 0.5, 0.667, 0.583 (d) 1, 0.667, 0.5

Answer: (a) 1, 0.667, 0.583
  • [Mo₆Cl₈]⁴⁺: Mo oxidation-state sum 8 + 4 = 12; m = 36 − 12 = 24; BO = 12/12 = 1.
  • [Nb₆Cl₁₂]²⁺: sum 14; m = 30 − 14 = 16; BO = 8/12 = 0.667.
  • [Nb₆Cl₁₂]⁴⁺: sum 16; m = 14; BO = 7/12 = 0.583.

Practice Q7. Consider the Chevrel-type phases Mo₆S₈ and PbMo₆S₈ (Pb as Pb²⁺). Which statements are correct?

  1. The Mo₆ cluster in Mo₆S₈ has 20 electrons available for Mo–Mo bonding.
  2. In PbMo₆S₈ the average Mo oxidation state is +7/3.
  3. Both have fewer than the 24 electrons needed to fill the Mo–Mo bonding orbitals, so both are expected to be metallic rather than closed-shell.
  4. The Mo₆S₈ unit has twelve edge-bridging sulfides, like [Nb₆Cl₁₂]²⁺.

(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  1. Mo sum = 16 (eight S²⁻); 36 − 16 = 20. Correct.
  2. [Mo₆S₈]²⁻: Mo sum 16 − 2 = 14; average 14/6 = 7/3 ≈ +2.33. Correct.
  3. 20 and 22 are both short of 24; partly filled cluster bands give metallic behaviour. Correct.
  4. Eight S, face-capping, as in [Mo₆Cl₈]⁴⁺, not twelve edge-bridging. Wrong.

Quick Revision Table

IdeaFact
Overlap\( d_{z^2} \) σ; \( d_{xz}, d_{yz} \) π; \( d_{xy} \) δ; \( d_{x^2-y^2} \) to ligands
Orderσ < π < δ < δ* < π* < σ*
[Re₂Cl₈]²⁻Re(III), σ²π⁴δ², BO 4, eclipsed, Re–Re ≈ 224 pm, blue (δ → δ*)
BO 4[Mo₂Cl₈]⁴⁻, Mo₂(O₂CR)₄, Cr₂(O₂CR)₄L₂ (long, variable)
BO 3.5[Mo₂(SO₄)₄]³⁻ (δ¹), [Tc₂Cl₈]³⁻ and [Re₂Cl₄(PR₃)₄]⁺ (δ*¹)
BO 3Re₂Cl₄(PR₃)₄, [Os₂Cl₈]²⁻ (δ²δ*², staggered); Mo₂(NMe₂)₆ (σ²π⁴)
BO 2.5 / 1Ru₂(O₂CR)₄Cl (3 unpaired) / Rh₂(O₂CR)₄
QuintupleAr’CrCrAr’, Cr(I), σ²π⁴δ⁴
Re₃Cl₉3 μ₂-Cl, 12 e⁻, three Re=Re
[Mo₆Cl₈]⁴⁺8 μ₃-Cl, 24 e⁻, 12 single bonds; MoCl₂, [Mo₆Cl₁₄]²⁻
[Nb₆Cl₁₂]ⁿ⁺12 μ₂-Cl; 2+ 16 e⁻, 3+ 15 e⁻ (paramagnetic), 4+ 14 e⁻; BO 2/3 for 2+
InterstitialZr₆Cl₁₂Z needs Z (H, Be, B, C, N, M)
ChevrelMo₆S₈ 20 e⁻; PbMo₆S₈ 22 e⁻; superconductors, high critical fields
Fe–S[Fe₄S₄]³⁺ +2.75 (HiPIP), 2+ +2.5, 1+ +2.25 (ferredoxin); FeMo-co MoFe₇S₉C

Key Takeaways

What’s Next

Advertisement
Advertisement