Skip to content

Catalysis Across Chemistry: Acid, Organo, Phase-Transfer, Bio and Photo

CSIR NET catalysis types: Lewis and solid acids, organocatalysis modes, phase-transfer catalysis, biocatalysis and resolutions, photoredox and electrocatalysis.

  • 20 min read
  • Updated
On this page · 15 sections
  1. Prerequisites
  2. The Hook: Five Catalysts on One Bench
  3. 1. Acid Catalysis Beyond the Proton
  4. 2. Organocatalysis
  5. 3. Phase-Transfer Catalysis (PTC)
  6. 4. Biocatalysis
  7. 5. Photocatalysis
  8. 6. Electrocatalysis in Brief
  9. Memory Tricks
  10. Don’t Confuse
  11. Common Mistakes
  12. Practice
  13. Quick Revision Table
  14. Key Takeaways
  15. What’s Next

Prerequisites

The Hook: Five Catalysts on One Bench

1. Acid Catalysis Beyond the Proton

Brønsted acid catalysis in one paragraph

Protonation makes a substrate more electrophilic (carbonyl, epoxide, alcohol) or a leaving group better (OH → OH₂⁺). Specific versus general acid catalysis, pH–rate profiles and the Brønsted catalysis law are covered in Enzyme Kinetics, Salt Effects and Homogeneous Catalysis.

Lewis acid catalysis

A Lewis acid (AlCl₃, BF₃·OEt₂, TiCl₄, SnCl₄, ZnCl₂, lanthanide triflates) coordinates to a lone pair, usually a carbonyl oxygen, and lowers the LUMO of the substrate.

ReactionEffect of the Lewis acid
Diels–Alder with an enone or acrylate dienophilerate rises strongly; endo and regioselectivity both increase (larger LUMO coefficient polarisation)
Friedel–Crafts alkylationgenerates the carbocation or polarised R–X complex; catalytic
Friedel–Crafts acylationacylium ion formation; stoichiometric, because the product ketone binds the Lewis acid
Mukaiyama aldolactivates the aldehyde towards a silyl enol ether
Epoxide opening, acetal formationactivates the leaving oxygen

Classic Lewis acids such as AlCl₃ hydrolyse in water and generate acidic aqueous waste on work-up. Water-tolerant Lewis acids such as scandium and lanthanide triflates, Ln(OTf)₃, keep their activity in aqueous media and can be recovered from the water layer; they are a standard example in green-chemistry discussions.

Solid acids

Solid acidAcid sitesTypical use
Zeolites (H-ZSM-5, H-Y)Brønsted sites from Al substitution in a silica framework, plus Lewis sitescracking, isomerisation, alkylation, shape-selective reactions
Sulfonated polystyrene resins–SO₃H groups on a cross-linked polymeresterification, etherification, hydration
Perfluorinated sulfonic acid polymers–CF₂SO₃H; very strongacylation, alkylation
Clays (montmorillonite, acid-treated)interlayer Brønsted and Lewis sitesFriedel–Crafts-type reactions, rearrangements
Sulfated zirconia, heteropolyacidsvery strong Brønsted sitesisomerisation, alkylation

Solid acids replace liquid H₂SO₄, HF and AlCl₃: they are filtered off and reused, they do not need neutralisation (no salt waste), and they are less corrosive. Zeolites add shape selectivity, covered on Heterogeneous Catalysis.

2. Organocatalysis

An organocatalyst is a small, metal-free organic molecule that catalyses a reaction. Advantages: usually air- and moisture-stable, non-toxic metals absent from the product, many derived from natural chiral pools (amino acids, cinchona alkaloids). The field is organised by activation mode, and recognising the mode is what the exam tests.

Activation modeCatalyst typeHow it worksTypical reactions
Enaminesecondary amines: L-proline, diarylprolinol silyl etherscondenses with a ketone or aldehyde donor to give an enamine; raises the HOMO of the nucleophilealdol, Mannich, α-amination, α-halogenation, Hajos–Parrish/Wieland–Miescher cyclisations
Iminiumsecondary amine salts: MacMillan imidazolidinonescondenses with an α,β-unsaturated aldehyde; lowers the LUMODiels–Alder, Friedel–Crafts alkylation, conjugate additions
Hydrogen-bond donorthioureas, squaramidesdouble H-bond to the electrophile (nitro, carbonyl, imine)Michael, Strecker, aza-Henry
Brønsted acidBINOL-derived chiral phosphoric acidsprotonates an imine to give a chiral ion pairMannich, transfer hydrogenation with Hantzsch esters
Lewis base / nucleophilicDMAP, tertiary amines, phosphinesnucleophile attacks the acyl donor to give a more reactive acyl-ammoniumacylation of hindered alcohols, Morita–Baylis–Hillman
N-heterocyclic carbene (NHC)thiazolium, triazolium salts + baseadds to an aldehyde; the resulting Breslow intermediate is an acyl anion equivalent (umpolung)benzoin condensation, Stetter reaction
Phase-transfer (chiral)cinchona-derived quaternary ammonium saltschiral ion pair carries an enolate into the organic phasealkylation of glycine imine esters

The enamine cycle (proline aldol)

graph LR
    A["Ketone + L-proline"] -->|"- H₂O"| B["Iminium ion"]
    B -->|"- H⁺"| C["Enamine
(raised HOMO)"] C -->|"aldehyde, directed by
proline CO₂H H-bond"| D["New C-C bond
(iminium)"] D -->|"+ H₂O"| E["Aldol product
+ proline regenerated"] E -.-> A

The carboxylic acid of proline is not a spectator: it hydrogen-bonds to the acceptor aldehyde in a chair-like transition state and fixes which face is attacked. This bifunctional behaviour (amine for covalent activation, acid for direction) is the key Part B point.

NHC umpolung in one line

An aldehyde carbon is normally electrophilic. After addition of an NHC and proton transfer, the same carbon in the Breslow intermediate is nucleophilic. That polarity reversal is umpolung, the idea treated generally in Umpolung. Thiamine (vitamin B₁) pyrophosphate does the same chemistry in enzymes, and cyanide does it in the classical benzoin condensation.

3. Phase-Transfer Catalysis (PTC)

The problem

Many useful nucleophiles are inorganic salts (NaCN, KF, NaOH, KMnO₄) that dissolve in water but not in the organic solvent that dissolves the substrate. Stirring the two layers together gives almost no reaction: the reactants never meet.

The solution: a lipophilic cation shuttle

A quaternary ammonium or phosphonium salt Q⁺X⁻, with enough carbon to be soluble in organic solvents, carries the anion across the interface as an ion pair.

graph TB
    subgraph ORG["Organic phase"]
        O1["Q⁺CN⁻ + R-Cl"] --> O2["R-CN + Q⁺Cl⁻"]
    end
    subgraph AQ["Aqueous phase"]
        A1["Na⁺CN⁻ (large excess)"]
        A2["Na⁺Cl⁻"]
    end
    O2 -->|"Q⁺Cl⁻ crosses
to water"| A2 A1 -->|"ion exchange:
Q⁺CN⁻ crosses
to organic"| O1

This is the Starks extraction mechanism. For reactions driven by concentrated aqueous hydroxide (dichlorocarbene from CHCl₃ and 50% NaOH, C-alkylation of active methylene compounds), deprotonation occurs at the interface and the catalyst then lifts the organic anion into the organic phase (the interfacial mechanism associated with Mąkosza).

Why the anion becomes so reactive

In the organic phase the anion is poorly solvated (no hydrogen bonds from water) and loosely paired with a large, charge-diffuse cation. A “naked” anion is far more nucleophilic and basic than the same anion in water.

Choosing a phase-transfer catalyst

CatalystComment
Tetrabutylammonium bromide or hydrogen sulfategeneral-purpose, cheap
Benzyltriethylammonium chloridecommon for hydroxide-promoted (interfacial) reactions
Methyltrioctylammonium chloridehighly lipophilic; stays in the organic phase
Hexadecyltributylphosphonium bromidethermally robust phosphonium salt
Tetramethylammonium saltspoor PTCs: too hydrophilic to enter the organic phase
Crown ethers, cryptandscomplex the metal cation itself; used for solid–liquid PTC
Cinchona-derived ammonium saltschiral PTC for enantioselective alkylation

Two rules: the cation must be lipophilic enough (roughly, a large total carbon count), and the anion being transferred must compete with the catalyst’s own counter-anion. Lipophilic, soft anions (I⁻, ClO₄⁻, tosylate) pair strongly with Q⁺ and can poison a PTC cycle that is supposed to carry a hard, hydrophilic anion such as F⁻ or OH⁻.

Crown ethers

Crown ethers bind alkali-metal cations inside their cavity; the size match decides selectivity.

Crown etherBest-fitting cation
12-crown-4Li⁺
15-crown-5Na⁺
18-crown-6K⁺

With 18-crown-6, solid KMnO₄ dissolves in benzene (“purple benzene”) and solid KF in acetonitrile gives a reactive “naked” fluoride. Cryptands enclose the cation in three dimensions and bind even more strongly.

Why PTC is green

PTC lets inexpensive inorganic reagents and water replace anhydrous dipolar aprotic solvents (DMF, DMSO, HMPA) and strong, hazardous bases (NaH, NaNH₂, alkoxides in dry solvents). It usually works at modest temperature, often with concentrated aqueous NaOH or KOH. A well-known green example is the oxidation of cyclohexene to adipic acid by 30% H₂O₂ with sodium tungstate and a quaternary ammonium hydrogen sulfate, without organic solvent: see Green Solvents, Energy Sources and Industrial Case Studies.

4. Biocatalysis

Why enzymes

StrengthLimitation
Very high chemo-, regio- and enantioselectivitynarrow natural substrate range (widened by protein engineering)
Water as solvent, near-ambient T and P, near-neutral pHlimited stability to heat, organic solvents and extreme pH
Biodegradable, renewable catalystsome need expensive cofactors (NAD(P)H, ATP)
Often no protecting groups neededproduct inhibition; dilute reaction streams

The seven top-level EC classes are oxidoreductases (EC 1), transferases (2), hydrolases (3), lyases (4), isomerases (5), ligases (6) and translocases (7). In synthesis the most used are hydrolases (lipases, esterases, proteases, amidases), oxidoreductases (ketoreductases/alcohol dehydrogenases, monooxygenases) and transferases (transaminases). The mechanisms (catalytic triad of serine hydrolases, transition-state stabilisation) are on Enzymes: Catalysis, Kinetics and Regulation.

Lipases in organic solvents

Lipases hydrolyse esters in water, but in a dry organic solvent they run the reverse reaction: transesterification. With an irreversible acyl donor such as vinyl acetate (the released vinyl alcohol tautomerises to acetaldehyde), a racemic secondary alcohol is acylated much faster on one enantiomer than on the other. The result is a kinetic resolution: one enantiomer as the ester, the other as the remaining alcohol.

Quantifying a kinetic resolution: the E value

The enantioselectivity of a resolution is the ratio of specificity constants for the two enantiomers, \( E = (k_{\text{cat}}/K_M)_{\text{fast}}/(k_{\text{cat}}/K_M)_{\text{slow}} \). For an irreversible resolution it is obtained from conversion c and ee of substrate (\( \text{ee}_s \)) or product (\( \text{ee}_p \)):

$$E = \frac{\ln[(1-c)(1-\text{ee}_s)]}{\ln[(1-c)(1+\text{ee}_s)]} = \frac{\ln[1-c(1+\text{ee}_p)]}{\ln[1-c(1-\text{ee}_p)]}$$

with the mass balance \( c = \text{ee}_s/(\text{ee}_s + \text{ee}_p) \).

Rules of thumb: E below about 15 is poor for preparative work; E above 100 lets both enantiomers be obtained in high ee near 50% conversion. The ester has its highest ee early in the reaction; the remaining substrate reaches high ee by pushing conversion past 50%.

Beating the 50% ceiling: dynamic kinetic resolution

A simple kinetic resolution gives at most 50% of one enantiomer. In a dynamic kinetic resolution (DKR) the slow-reacting enantiomer is racemised in situ (for secondary alcohols, by a ruthenium racemisation catalyst) while the lipase acylates the fast one, so up to 100% of one enantiomer of ester can form. The requirement: racemisation must be fast compared with acylation of the slow enantiomer, and the product must not racemise.

Cofactor recycling and engineered enzymes

Ketoreductases need NAD(P)H. Using it stoichiometrically is far too costly, so it is regenerated by a second enzyme and a cheap reductant: glucose with glucose dehydrogenase, formate with formate dehydrogenase (CO₂ as by-product), or 2-propanol oxidised to acetone by the same alcohol dehydrogenase. Directed evolution (rounds of mutation and screening) tailors an enzyme to a non-natural substrate, higher stability or reversed enantioselectivity. A frequently cited industrial example is an engineered transaminase that installs the chiral amine of the antidiabetic drug sitagliptin directly from a ketone, replacing a rhodium-catalysed asymmetric hydrogenation of an enamine.

5. Photocatalysis

Semiconductor photocatalysis

When a semiconductor absorbs a photon with energy at least equal to its band gap \( E_g \), an electron is promoted from the valence band to the conduction band, leaving a hole.

  • The hole (h⁺) is a strong oxidant: it oxidises water or surface hydroxide to hydroxyl radicals, or oxidises an adsorbed organic molecule directly.
  • The electron reduces O₂ to superoxide, or H⁺ to H₂ on a co-catalyst (Pt).
  • Recombination of electron and hole wastes the photon; co-catalysts and nanostructuring slow it.

Titanium dioxide is the standard: cheap, stable, non-toxic. Its band gap (about 3.2 eV for anatase, about 3.0 eV for rutile) corresponds to

$$\lambda_{\max} = \frac{hc}{E_g} = \frac{1240\ \text{nm eV}}{3.2\ \text{eV}} \approx 387\ \text{nm (UV)}$$

so pure TiO₂ uses only the ultraviolet part of sunlight. Doping (for example with nitrogen) or dye sensitisation extends absorption into the visible. Applications: degradation of organic pollutants in water and air, self-cleaning and anti-fogging surfaces, and photoelectrochemical water splitting.

Molecular photoredox catalysis

Complexes such as [Ru(bpy)₃]²⁺ and cyclometallated Ir(III) complexes, and organic dyes such as eosin Y, absorb visible light, reach a long-lived excited state (a triplet MLCT state for Ru), and transfer one electron to or from a substrate.

The key idea: the excited state is both a better oxidant and a better reductant than the ground state, by the excited-state energy \( E_{0,0} \):

$$E(\mathrm{PC^+/PC^*}) = E(\mathrm{PC^+/PC}) - E_{0,0}, \qquad E(\mathrm{PC^*/PC^-}) = E(\mathrm{PC/PC^-}) + E_{0,0}$$

(with \( E_{0,0} \) in eV giving potentials in V).

Quenching modeFirst stepThen
Oxidative quenchingPC* gives an electron to an acceptor A → PC⁺ + A•⁻PC⁺ is reduced back by a donor
Reductive quenchingPC* takes an electron from a donor D → PC⁻ + D•⁺PC⁻ reduces an acceptor, regenerating PC

Stern–Volmer analysis

Whether a substrate actually intercepts the excited state is tested by emission quenching:

$$\frac{I_0}{I} = \frac{\tau_0}{\tau} = 1 + K_{SV}[\mathrm{Q}], \qquad K_{SV} = k_q\tau_0$$

A linear plot of \( I_0/I \) against quencher concentration gives \( K_{SV} \); dividing by the unquenched lifetime gives the bimolecular quenching constant \( k_q \). A \( k_q \) near the diffusion limit means quenching on almost every encounter. A substrate that does not quench the emission cannot be the species that reacts with the excited photocatalyst.

6. Electrocatalysis in Brief

An electrocatalyst lowers the overpotential \( \eta \) (extra voltage beyond the thermodynamic value) needed to drive an electrode reaction at a useful current. Key reactions: hydrogen evolution (HER; Pt is the benchmark), oxygen evolution (OER; IrO₂ and RuO₂ in acid, Ni–Fe oxides in base) and oxygen reduction in fuel cells (Pt). At high overpotential the current follows the Tafel equation

$$\eta = a + b\log_{10} j, \qquad b = \frac{2.303RT}{\alpha F}$$

For \( \alpha = 0.5 \) at 298 K, \( b = 0.118 \) V per decade. A smaller Tafel slope and a larger exchange current density mean a better electrocatalyst. Activity plotted against metal–hydrogen bond strength gives a volcano, the electrochemical form of the Sabatier principle. Electrochemistry fundamentals are on Electrochemical Cells and the Nernst Equation.

Memory Tricks

Don’t Confuse

ThisvsThat
Enamine catalysis (proline): nucleophile from a carbonyl donorIminium catalysis (MacMillan): electrophile from an enal
PTC with Q⁺X⁻: liquid–liquid, anion shuttleCrown ether: binds the cation, often solid–liquid
Starks extraction mechanism (anion exchange, transfer)Interfacial mechanism (deprotonation at the interface by concentrated OH⁻)
Kinetic resolution: maximum 50% of one enantiomerDynamic kinetic resolution: in-situ racemisation, up to 100%
E value: ratio of specificity constantsee: composition at one moment; changes with conversion
Semiconductor photocatalyst: band gap, e⁻/h⁺ pairMolecular photoredox catalyst: discrete excited state, single electron transfer
Oxidative quenching: PC* → PC⁺Reductive quenching: PC* → PC⁻
Lewis acid in FC alkylation: catalyticLewis acid in FC acylation: stoichiometric

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Which frontier orbital does iminium catalysis modify, and in which direction?
  2. Which crown ether best complexes Na⁺?
  3. Name the enzyme class to which lipases belong.
Answers
  1. It lowers the LUMO of the α,β-unsaturated carbonyl compound, activating it as an electrophile.
  2. 15-crown-5.
  3. Hydrolases (EC 3).

Level 2: Part B Style

Practice Q1. The displacement of chloride from 1-chlorooctane by aqueous NaCN in a toluene–water mixture is best catalysed by:

(a) tetramethylammonium chloride (b) methyltrioctylammonium chloride (c) sodium dodecyl sulfate (d) 12-crown-4

Answer: (b)

A lipophilic quaternary ammonium salt carries CN⁻ into the organic phase (Starks mechanism). Tetramethylammonium is too hydrophilic (a). An anionic surfactant cannot pair with and transfer an anion (c). 12-crown-4 is sized for Li⁺, not Na⁺ (d).

Practice Q2. Match the catalyst with its activation mode.

CatalystMode
P. L-proline with cyclohexanonei. acyl anion equivalent (umpolung)
Q. Imidazolidinone salt with cinnamaldehydeii. enamine
R. Thiazolium salt + base with benzaldehydeiii. nucleophilic acyl transfer
S. DMAP with acetic anhydrideiv. iminium

(a) P-ii, Q-iv, R-i, S-iii (b) P-iv, Q-ii, R-i, S-iii (c) P-ii, Q-iv, R-iii, S-i (d) P-ii, Q-i, R-iv, S-iii

Answer: (a)

Proline + ketone donor → enamine; imidazolidinone + enal → iminium; NHC (from thiazolium) + aldehyde → Breslow intermediate (acyl anion equivalent); DMAP attacks the anhydride to form an acylpyridinium ion.

Practice Q3. A semiconductor photocatalyst has a band gap of 3.2 eV. The longest wavelength that can create an electron–hole pair is closest to:

(a) 250 nm (b) 387 nm (c) 450 nm (d) 620 nm

Answer: (b)

\( \lambda = 1240/3.2 = 387 \) nm. Longer wavelengths carry less energy than the gap.

Practice Q4. Which statement about a lipase-catalysed kinetic resolution of a racemic secondary alcohol with vinyl acetate is incorrect?

(a) The acyl donor makes the reaction effectively irreversible because the enol by-product tautomerises to acetaldehyde. (b) The ee of the remaining alcohol rises as conversion increases. (c) With a very high E, more than 50% of the ester can be obtained as one enantiomer. (d) The reaction is run in an organic solvent so that transesterification, not hydrolysis, dominates.

Answer: (c)

Without in-situ racemisation, at most 50% of the racemate can be converted to one enantiomer of ester. Statements (a), (b) and (d) are correct.

Level 3: Part C Style

Practice Q5. In a lipase-catalysed acetylation of a racemic alcohol, the reaction is stopped at 40% conversion. The remaining alcohol has 60% ee. Which statements are correct?

  1. The ester has 90% ee.
  2. The enantioselectivity factor E is about 35.
  3. If the reaction were continued to 60% conversion, the ee of the remaining alcohol would increase.
  4. Adding a racemisation catalyst for the alcohol would allow a maximum ester yield of 50%.

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2 and 4 only (d) 1, 2, 3 and 4

Answer: (b) 1, 2 and 3 only
  • \( \text{ee}_p = \text{ee}_s(1-c)/c = 0.60\times0.60/0.40 = 0.90 \). True.
  • \( E = \ln(0.60\times0.40)/\ln(0.60\times1.60) = \ln 0.24/\ln 0.96 = 35 \). True.
  • As the fast enantiomer is consumed, the remaining alcohol is enriched in the slow one; its ee keeps rising with conversion. True.
  • Racemisation turns the process into a dynamic kinetic resolution, so the ceiling rises to 100%, not 50%. False.

Practice Q6. A photocatalyst PC has \( E(\mathrm{PC^+/PC}) = +1.29 \) V and \( E(\mathrm{PC/PC^-}) = -1.33 \) V vs SCE, and \( E_{0,0} = 2.10 \) eV. Substrate X has a reduction potential \( E(\mathrm{X/X^{\bullet-}}) = -0.60 \) V; amine D has an oxidation potential \( E(\mathrm{D^{\bullet+}/D}) = +0.70 \) V; arene Y has \( E(\mathrm{Y/Y^{\bullet-}}) = -1.10 \) V (all vs SCE). Which statements are correct?

  1. PC* can reduce X by oxidative quenching.
  2. PC* can oxidise D by reductive quenching.
  3. The PC⁻ formed after reductive quenching by D can reduce Y.
  4. Ground-state PC can oxidise D.

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 3 and 4 only (d) 1, 2, 3 and 4

Answer: (b) 1, 2 and 3 only
  • \( E(\mathrm{PC^+/PC^*}) = 1.29 - 2.10 = -0.81 \) V, more negative than −0.60 V, so electron transfer to X is downhill by 0.21 eV. True.
  • \( E(\mathrm{PC^*/PC^-}) = -1.33 + 2.10 = +0.77 \) V, more positive than +0.70 V, so oxidation of D is downhill by 0.07 eV. True.
  • PC⁻ has \( E(\mathrm{PC/PC^-}) = -1.33 \) V, more negative than −1.10 V, so it reduces Y. True.
  • Oxidising D with ground-state PC needs \( E(\mathrm{PC/PC^-}) > +0.70 \) V; it is −1.33 V. False.

Practice Q7. The emission of a photocatalyst (unquenched lifetime \( \tau_0 = 1.0\ \mu\text{s} \)) was measured with increasing concentrations of a substrate Q. A linear Stern–Volmer plot gave \( I_0/I = 3.0 \) at [Q] = 20 mM. Which statements are correct?

  1. \( K_{SV} = 100\ \text{M}^{-1} \).
  2. \( k_q = 1.0\times10^{8}\ \text{M}^{-1}\text{s}^{-1} \).
  3. At [Q] = 5.0 mM, one third of the excited states are quenched by Q.
  4. The emission lifetime at [Q] = 20 mM is 3.0 µs.

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2 and 4 only (d) 1, 2, 3 and 4

Answer: (b) 1, 2 and 3 only
  • \( K_{SV} = (3.0 - 1)/0.020 = 100\ \text{M}^{-1} \). True.
  • \( k_q = K_{SV}/\tau_0 = 100/(1.0\times10^{-6}) = 1.0\times10^{8}\ \text{M}^{-1}\text{s}^{-1} \). True.
  • Fraction quenched \( = K_{SV}[\mathrm{Q}]/(1 + K_{SV}[\mathrm{Q}]) = 0.5/1.5 = 1/3 \). True.
  • For dynamic quenching \( \tau_0/\tau = I_0/I = 3.0 \), so \( \tau = 0.33\ \mu\text{s} \); the lifetime shortens, it does not lengthen. False.

Quick Revision Table

IdeaFormula or fact
Lewis acid catalysislowers LUMO; FC alkylation catalytic, FC acylation stoichiometric; Ln(OTf)₃ water-tolerant
Solid acidszeolites, sulfonic resins, clays, sulfated zirconia; filter, reuse, no neutralisation salts
Enamineproline, ketone donor, HOMO raised; CO₂H directs the electrophile
Iminiumimidazolidinones, enal acceptor, LUMO lowered
H-bond / Brønsted acidthioureas, squaramides / chiral phosphoric acids
NHCBreslow intermediate; benzoin, Stetter; umpolung
PTClipophilic Q⁺ shuttles anion (Starks); interfacial mechanism for conc. OH⁻; Me₄N⁺ poor
Crown ethers12-crown-4 Li⁺, 15-crown-5 Na⁺, 18-crown-6 K⁺
EC classes1 oxidoreductase, 2 transferase, 3 hydrolase, 4 lyase, 5 isomerase, 6 ligase, 7 translocase
E value\( \ln[(1-c)(1-\text{ee}_s)]/\ln[(1-c)(1+\text{ee}_s)] \); \( c = \text{ee}_s/(\text{ee}_s+\text{ee}_p) \)
KR vs DKR≤ 50% vs ≤ 100%
Cofactor recyclingGDH/glucose, FDH/formate, ADH/2-propanol
Semiconductor\( \lambda = 1240/E_g \); TiO₂ ≈ 3.2 eV (anatase) → UV
Excited-state potentials\( E^*_{\text{ox}} = E_{\text{ox}} - E_{0,0} \); \( E^*_{\text{red}} = E_{\text{red}} + E_{0,0} \)
Stern–Volmer\( I_0/I = \tau_0/\tau = 1 + k_q\tau_0[\mathrm{Q}] \)
Tafel\( b = 2.303RT/\alpha F \) = 0.118 V/decade for α = 0.5 at 298 K

Key Takeaways

What’s Next