Principles of Catalysis: Energetics, Cycles and Kinetics
CSIR NET catalysis basics: why K is unchanged, rate enhancement, TON and TOF, selectivity and ee, catalytic cycles, saturation kinetics, energetic span.
- 20 min
On this page · 16 sections
- Prerequisites
- The Hook: One Atom, a Million Molecules
- 1. What a Catalyst Is
- 2. Energetics: How Much Faster?
- 3. Measuring a Catalyst: Activity, Productivity, Lifetime
- 4. Selectivity: Often Worth More Than Activity
- 5. Catalytic Cycles
- 6. Classes of Catalysis
- 7. Deactivation and Inhibition
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Rate Laws and Temperature Dependence: Arrhenius and Eyring equations, the language every catalytic rate is written in.
- Chemical Equilibrium and Le Chatelier’s Principle: why a catalyst can never move K.
- Complex Reactions and the Steady-State Approximation: the steady-state treatment behind saturation kinetics.
- Enzyme Kinetics, Salt Effects and Homogeneous Catalysis: Michaelis–Menten and acid–base catalysis, which this page generalises.
The Hook: One Atom, a Million Molecules
1. What a Catalyst Is
A catalyst is a substance that increases the rate of a reaction without itself being consumed and without changing the standard Gibbs energy change of the overall reaction. The phenomenon is catalysis. A substance that slows a reaction by interfering with a catalyst is an inhibitor; one that destroys catalytic activity is a poison.
Three working consequences follow directly from the definition:
- The catalyst appears on both sides of the net cycle. It is consumed in one step and regenerated in a later one, so it does not appear in the balanced overall equation.
- The equilibrium constant is unchanged. \( K = \exp(-\Delta_r G^\circ/RT) \) depends only on reactants and products. Because \( K = k_f/k_r \) for an elementary equilibrium, a catalyst that multiplies \( k_f \) by some factor multiplies \( k_r \) by the same factor (microscopic reversibility).
- A catalyst cannot make a thermodynamically forbidden reaction happen. It can only bring a reaction with \( \Delta_r G < 0 \) to equilibrium faster, or let it reach equilibrium at a lower temperature where K is more favourable.
2. Energetics: How Much Faster?
The energy profile
A catalyst replaces one high barrier by a sequence of lower ones. Reactants and products sit at the same Gibbs energies with or without the catalyst; only the path between them changes.
graph LR
R["Reactants
G = 0"] -->|"uncatalysed:
one high barrier"| P["Products
same G with or
without catalyst"]
R -->|"+ catalyst"| I1["Catalyst-substrate
complex"]
I1 -->|"lower barrier"| I2["Catalyst-product
complex"]
I2 -->|"product release,
catalyst regenerated"| PRate enhancement from a lowered barrier
From the Eyring equation, \( k = (k_BT/h)\exp(-\Delta G^\ddagger/RT) \). If the catalysed and uncatalysed paths have the same pre-exponential behaviour, the ratio of rate constants depends only on the barrier lowering \( \Delta\Delta G^\ddagger \):
$$\boxed{\frac{k_{\text{cat}}}{k_{\text{uncat}}} = \exp\!\left(\frac{\Delta\Delta G^\ddagger}{RT}\right)}$$| Barrier lowered by | Factor at 298 K | Factor at 500 K |
|---|---|---|
| 10 kJ mol⁻¹ | about 57 | about 11 |
| 20 kJ mol⁻¹ | about 3.2 × 10³ | about 1.2 × 10² |
| 30 kJ mol⁻¹ | about 1.8 × 10⁵ | about 1.4 × 10³ |
Catalysis and the temperature compromise
For an exothermic equilibrium, raising T speeds the reaction but lowers K. A catalyst breaks the compromise: it allows a lower T at an acceptable rate, so a higher equilibrium conversion is reached. This is the correct way to say that “a catalyst improves the yield”: it improves the achievable yield by allowing milder conditions, never by moving K at a given temperature.
3. Measuring a Catalyst: Activity, Productivity, Lifetime
| Quantity | Definition | Units | Comment |
|---|---|---|---|
| Catalyst loading | mol catalyst per mol limiting substrate × 100 | mol% | 1 mol% means substrate : catalyst = 100 : 1 |
| Turnover number (TON) | mol product per mol catalyst (or active site) | dimensionless | strictly, the total before the catalyst dies; often quoted for a given run |
| Turnover frequency (TOF) | turnovers per active site per unit time | s⁻¹ or h⁻¹ | intrinsic activity; should be quoted at low conversion or as an initial rate |
| Space-time yield | product per unit reactor volume per time | kg L⁻¹ h⁻¹ | what a plant engineer needs |
| Selectivity | mol desired product / mol substrate converted | % | independent of conversion in the definition |
| Yield | conversion × selectivity | % | what you isolate |
For heterogeneous catalysts, “per active site” needs a site count (selective chemisorption of H₂ or CO on metals); the details and the dispersion calculation are on Heterogeneous Catalysis. For enzymes, TOF at saturation is \( k_{\text{cat}} \).
4. Selectivity: Often Worth More Than Activity
A catalyst that is fast but unselective makes waste. Selectivity comes in several kinds:
| Kind | Question it answers | Catalyst example |
|---|---|---|
| Chemoselectivity | which functional group reacts | Lindlar Pd (alkyne → cis-alkene, alkene left alone) |
| Regioselectivity | which position / orientation | linear vs branched aldehyde in hydroformylation (n : iso ratio) |
| Diastereoselectivity | which relative configuration | directed hydrogenations by a coordinating OH group |
| Enantioselectivity | which enantiomer | Ru–BINAP hydrogenation, Sharpless epoxidation, proline aldol |
| Shape selectivity | which molecule fits | ZSM-5 favours para-xylene |
Enantioselectivity and the energy difference
If the two enantiomers come from competing diastereomeric transition states that differ by \( \Delta\Delta G^\ddagger \), under kinetic control:
$$\text{er} = \frac{[\text{major}]}{[\text{minor}]} = \exp\!\left(\frac{\Delta\Delta G^\ddagger}{RT}\right), \qquad \text{ee} = \frac{\text{er} - 1}{\text{er} + 1}$$| ee | er | \( \Delta\Delta G^\ddagger \) at 298 K | at 195 K |
|---|---|---|---|
| 80% | 9 : 1 | 5.4 kJ mol⁻¹ | 3.6 kJ mol⁻¹ |
| 90% | 19 : 1 | 7.3 kJ mol⁻¹ | 4.8 kJ mol⁻¹ |
| 96% | 49 : 1 | 9.6 kJ mol⁻¹ | 6.3 kJ mol⁻¹ |
| 99% | 199 : 1 | 13.1 kJ mol⁻¹ | 8.6 kJ mol⁻¹ |
Two lessons: high ee needs only a modest energy difference (about the strength of one hydrogen bond), and cooling the reaction raises ee for a fixed \( \Delta\Delta G^\ddagger \). The asymmetric side of this is developed in Substrate, Reagent and Catalyst Control.
5. Catalytic Cycles
Vocabulary
| Term | Meaning |
|---|---|
| Precatalyst | the compound you add; converted in situ into the active species |
| Active species | the species that enters the cycle |
| Resting state | the most abundant catalyst-containing species during turnover |
| Turnover-limiting step | the step whose barrier, measured from the resting state, controls TOF |
| Off-cycle species | a catalyst form outside the cycle (dimer, ligand adduct, product complex) that lowers the active concentration |
A general cycle for a one-substrate reaction S → P with catalyst C:
graph LR
C["C (active catalyst)"] -->|"+ S, binding"| CS["C·S"]
CS -->|"chemical step(s)"| CP["C·P"]
CP -->|"- P, release"| C
C -.->|"reversible"| D["Off-cycle:
C₂ dimer or
C·inhibitor"]Saturation kinetics: the universal shape
Apply the steady-state approximation to \( \mathrm{C + S \rightleftharpoons C{\cdot}S \rightarrow C + P} \) with total catalyst \( [\mathrm{C}]_0 \):
$$\boxed{\text{rate} = \frac{k_{\text{cat}}[\mathrm{C}]_0[\mathrm{S}]}{K + [\mathrm{S}]}}$$This is the Michaelis–Menten equation, but it is not special to enzymes: it describes any catalyst that binds substrate before the chemical step (organometallic complexes, organocatalysts and, in the Langmuir form, solid surfaces).
| Regime | Resting state | Order in S | Order in catalyst |
|---|---|---|---|
| \( [\mathrm{S}] \ll K \) | free catalyst C | 1 | 1 |
| \( [\mathrm{S}] \gg K \) | C·S complex | 0 | 1 |
Reading a rate law backwards gives the resting state: zero order in substrate means the catalyst is saturated with it. First order in catalyst is the normal case for a monomeric active species.
Fractional order in catalyst
If the catalyst rests as an inactive dimer \( \mathrm{C_2} \rightleftharpoons 2\mathrm{C} \) with \( K_d \) small, the active monomer concentration is \( [\mathrm{C}] = (K_d[\mathrm{C_2}])^{1/2} \approx (K_d[\mathrm{C}]_0/2)^{1/2} \), so the rate is half order in total catalyst. Half-order dependence on catalyst loading is a classic signature of a dimeric resting state that must dissociate.
Which step controls the rate? The energetic span
Students often name “the step with the highest barrier” as rate-determining. In a cycle that is wrong when the intermediates sit at very different energies. The energetic span model (Kozuch and Shaik) gives the TOF of a cycle at steady state from two states:
- the TOF-determining intermediate (TDI), a deep energy well, and
- the TOF-determining transition state (TDTS), a high transition state,
chosen as the pair that maximises
$$\delta E = \begin{cases} T_{\text{TDTS}} - I_{\text{TDI}} & \text{if the TDTS comes after the TDI in the cycle} \\ T_{\text{TDTS}} - I_{\text{TDI}} + \Delta_r G & \text{if the TDTS comes before the TDI} \end{cases}$$$$\boxed{\text{TOF} \approx \frac{k_BT}{h}\, e^{-\delta E/RT}}$$\( \Delta_r G \) is negative for an exergonic reaction, so a TS that lies before a deep intermediate is “discounted” by the reaction energy of one turnover.
Two design rules come out of the model and are popular Part C statements:
- Over-stabilising an intermediate slows the catalyst if that intermediate becomes the TDI (it deepens the well the system must climb out of). This is the Sabatier principle in molecular language.
- Making the overall reaction more exergonic helps only when the TDTS precedes the TDI.
6. Classes of Catalysis
| Class | Catalyst | Typical reactions | Where on this site |
|---|---|---|---|
| Homogeneous, acid–base | H₃O⁺, OH⁻, buffer acids and bases | ester hydrolysis, enolisation, mutarotation | Enzyme Kinetics, Salt Effects and Homogeneous Catalysis |
| Homogeneous, Lewis acid | AlCl₃, BF₃, TiCl₄, lanthanide triflates | Friedel–Crafts, Diels–Alder, aldol | Catalysis Across Chemistry |
| Homogeneous, organometallic | Rh, Pd, Ru, Co, Ir complexes | hydrogenation, hydroformylation, cross-coupling, metathesis | Homogeneous Catalysis by Organometallic Complexes |
| Heterogeneous | metals, oxides, zeolites | ammonia synthesis, cracking, oxidation | Heterogeneous Catalysis |
| Organocatalysis | small organic molecules (amines, thioureas, NHCs) | aldol, Michael, benzoin | Catalysis Across Chemistry |
| Phase-transfer | Q⁺X⁻, crown ethers | substitution, alkylation, oxidation in two phases | Catalysis Across Chemistry |
| Biocatalysis | enzymes, whole cells | resolutions, reductions, transaminations | Enzymes: Catalysis, Kinetics and Regulation |
| Photo- and electrocatalysis | semiconductors, Ru/Ir complexes, electrode surfaces | photoredox couplings, water splitting | Catalysis Across Chemistry |
| Autocatalysis | a product of the reaction | permanganate–oxalate, some polymerisations | Enzyme Kinetics, Salt Effects and Homogeneous Catalysis |
Homogeneous versus heterogeneous: the trade-off
| Feature | Homogeneous | Heterogeneous |
|---|---|---|
| Active sites | every molecule, well defined | surface sites, a distribution |
| Selectivity | high, tunable by ligands | usually lower, improved by supports and promoters |
| Conditions | mild | often high T |
| Mechanistic study | NMR, IR, kinetics of defined species | harder; surface science |
| Separation and reuse | difficult; metal traces in product | easy filtration; continuous fixed beds |
| Thermal stability | limited | high |
The gap is bridged by heterogenised catalysts: complexes anchored on silica or polymers, aqueous biphasic systems (a water-soluble sulfonated phosphine such as TPPTS keeps rhodium in the water layer while the organic product separates), fluorous biphasic systems, and supported ionic-liquid phases. These matter for green chemistry because separation and metal recovery dominate the waste of many catalytic processes.
7. Deactivation and Inhibition
| Mode | What happens | Typical case |
|---|---|---|
| Poisoning | a strongly binding species blocks active sites | sulfur on Ni, Pt, Pd; CO on some metal sites |
| Selective poisoning (useful) | partial poisoning tunes selectivity | Lindlar catalyst: Pd/CaCO₃ with lead acetate and quinoline |
| Fouling / coking | carbon deposits cover the surface | acid cracking catalysts, regenerated by burning off coke |
| Sintering | metal particles grow, losing surface area | high-temperature supported metals |
| Leaching | active metal dissolves into the liquid | supported Pd in liquid-phase coupling |
| Ligand degradation / cluster formation | homogeneous complexes decompose, metal precipitates | phosphine oxidation; “palladium black” |
| Product inhibition | product binds the catalyst and competes with substrate | many enzymes; Friedel–Crafts acylation |
A sharp fall in TOF with time, or an induction period followed by acceleration, both carry mechanistic information: deactivation in the first case; slow precatalyst activation (or autocatalysis) in the second.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Catalyst: regenerated, does not appear in the net equation | Reagent or promoter of a reaction (OH⁻ in saponification): consumed | |
| TON: dimensionless count | TOF: count per unit time (s⁻¹, h⁻¹) | |
| Selectivity: product / substrate converted | Yield: product / substrate charged (= conversion × selectivity) | |
| Rate-determining step of a linear sequence | TOF-determining states (TDI, TDTS) of a cycle | |
| Resting state: most abundant catalyst species | Active species: the one that turns over (may be a minor species) | |
| Inhibitor: reversibly slows the catalyst | Poison: deactivates, often irreversibly | |
| ee: \( (\text{er}-1)/(\text{er}+1) \) | er: ratio of enantiomers; 90% ee is 19 : 1, not 9 : 1 | |
| Catalyst lowers \( E_a \) of forward and reverse | Catalyst never alters \( \Delta H \) or \( \Delta G \) |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- Why does a catalyst not change the equilibrium constant of a reaction?
- Define turnover frequency and give its SI unit.
- A reaction is zero order in substrate and first order in catalyst. What is the resting state of the catalyst?
Answers
- K depends only on \( \Delta_r G^\circ \), a property of reactants and products. The catalyst lowers the forward and reverse barriers equally, so \( k_f/k_r \) is unchanged.
- The number of turnovers (moles of product per mole of active sites) per unit time; unit s⁻¹ (h⁻¹ is also common).
- The catalyst–substrate complex: the catalyst is saturated with substrate, so adding more substrate does not raise the rate.
Level 2: Part B Style
Practice Q1. At 298 K a catalyst lowers the Gibbs energy of activation of a reaction by 20 kJ mol⁻¹ without changing the pre-exponential term. The rate increases by a factor of approximately:
(a) 8 (b) 57 (c) 3.2 × 10³ (d) 1.8 × 10⁵
Answer: (c)
\( \exp(20000/(8.314\times298)) = \exp(8.07) = 3.2\times10^3 \). Option (b) is the factor for 10 kJ mol⁻¹; (d) for 30 kJ mol⁻¹.
Practice Q2. An asymmetric catalyst gives a product with 90% ee at 298 K. The difference in Gibbs energy between the competing diastereomeric transition states is closest to:
(a) 2.5 kJ mol⁻¹ (b) 5.4 kJ mol⁻¹ (c) 7.3 kJ mol⁻¹ (d) 11.4 kJ mol⁻¹
Answer: (c)
90% ee means 95 : 5, er = 19. \( \Delta\Delta G^\ddagger = RT\ln 19 = 8.314\times298\times2.944 = 7.3 \) kJ mol⁻¹. Option (b) uses er = 9 (the ee/er confusion).
Practice Q3. A coupling reaction is run with 0.050 mol% catalyst and gives 92% product in 4.0 h. The TON and average TOF are:
(a) 1840 and 460 h⁻¹ (b) 184 and 46 h⁻¹ (c) 1840 and 46 h⁻¹ (d) 2000 and 500 h⁻¹
Answer: (a)
TON = 0.92 / 0.00050 = 1840; TOF = 1840 / 4.0 h = 460 h⁻¹ (0.128 s⁻¹). Option (d) ignores the 92% yield; (b) divides the loading by 10 and then the TON by 10 again for the TOF.
Practice Q4. In which of the following does the added species act as a true catalyst?
(a) NaOH in the hydrolysis of ethyl acetate to sodium acetate (b) AlCl₃ (1.1 equiv) in the acylation of anisole with acetyl chloride (c) H₂SO₄ (a few drops) in the esterification of acetic acid with ethanol (d) AIBN in the radical bromination of toluene with NBS
Answer: (c)
The proton is regenerated in acid-catalysed esterification. Hydroxide is consumed as acetate forms (a); AlCl₃ is held by the product ketone (b); AIBN is an initiator consumed on decomposition (d).
Level 3: Part C Style
Practice Q5. A catalytic cycle has the Gibbs energy profile (kJ mol⁻¹) C + S (0) → I₁ (−20) → TS₁ (+55) → I₂ (−40) → TS₂ (+30) → C + P (−80). Which statements are correct at 298 K?
- The energetic span is 75 kJ mol⁻¹, with I₁ as TDI and TS₁ as TDTS.
- The TOF is about 0.45 s⁻¹.
- Stabilising I₁ by a further 10 kJ mol⁻¹ (to −30) would speed up the catalyst.
- Making the overall reaction more exergonic (C + P at −100) without changing any other state would not change the TOF.
(a) 1 and 2 only (b) 1, 2 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (b) 1, 2 and 4 only
- Spans: TS₁ − I₁ = 75; TS₂ − I₁ = 50; TS₂ − I₂ = 70; TS₁ − I₂ + ΔG = 55 + 40 − 80 = 15. Maximum 75. True.
- TOF \( = 6.21\times10^{12}\times e^{-75000/(8.314\times298.15)} = 0.45 \) s⁻¹. True.
- I₁ at −30 makes δE = 85 kJ mol⁻¹; TOF falls by \( e^{10000/RT} \approx 57 \). Deepening the TDI slows the catalyst. False.
- The TDTS (TS₁) lies after the TDI (I₁), so \( \Delta_r G \) does not enter δE. The only span containing \( \Delta_r G \), TS₁ − I₂ + ΔG, falls further (to −5). True.
Practice Q6. Initial rates of a homogeneous catalytic reaction were measured at a fixed catalyst concentration of 1.0 mM:
| [S] (M) | 0.020 | 0.050 | 0.10 | 0.50 |
|---|---|---|---|---|
| Rate (mM s⁻¹) | 0.571 | 1.00 | 1.33 | 1.82 |
Which statements are correct?
- The data fit saturation kinetics with \( k_{\text{cat}} = 2.0\ \text{s}^{-1} \) and K = 0.050 M.
- At [S] = 0.50 M the resting state is mainly the catalyst–substrate complex.
- The apparent order in S at [S] = 0.020 M is about 0.7.
- Doubling the catalyst concentration at [S] = 0.50 M would leave the rate unchanged because the reaction is zero order there.
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- Check: \( 2.0\times1.0\times0.020/0.070 = 0.571 \); \( 2.0\times0.050/0.100 = 1.00 \); \( 2.0\times0.10/0.15 = 1.33 \); \( 2.0\times0.50/0.55 = 1.82 \) mM s⁻¹. True.
- [S] = 10K, so the fraction bound is \( [\mathrm{S}]/(K+[\mathrm{S}]) = 0.91 \). True.
- Order in S \( = K/(K+[\mathrm{S}]) = 0.050/0.070 = 0.71 \). True.
- Zero order in substrate does not mean zero order in catalyst: the rate is \( k_{\text{cat}}[\mathrm{C}]_0 \) and doubles. False.
Practice Q7. For a palladium-catalysed reaction, initial rate was measured against total catalyst loading at fixed substrate concentrations:
| [Pd]ₜₒₜₐₗ (mM) | 0.25 | 1.0 | 4.0 |
|---|---|---|---|
| Rate (µM s⁻¹) | 1.0 | 2.0 | 4.0 |
Which statements are correct?
- The rate is half order in total catalyst.
- The data are consistent with a resting state that is an inactive dimer in equilibrium with a small amount of active monomer.
- TOF per palladium atom increases with loading.
- Adding a ligand that splits the dimer into monomers would be expected to raise the rate per palladium.
(a) 1 and 2 only (b) 1, 2 and 4 only (c) 3 and 4 only (d) 1, 2, 3 and 4
Answer: (b) 1, 2 and 4 only
- A 16-fold increase in loading doubles the rate twice (×4): order \( = \ln 4/\ln 16 = 0.5 \). True.
- With \( \mathrm{Pd_2} \rightleftharpoons 2\mathrm{Pd} \) and small \( K_d \), [Pd]active ∝ [Pd]total^{1/2}. True.
- Rate per Pd: 1.0/0.25 = 4.0, 2.0/1.0 = 2.0, 4.0/4.0 = 1.0 (in units of 10⁻³ s⁻¹). It falls with loading. False.
- Breaking the off-cycle dimer raises the active fraction. True.
Quick Revision Table
| Idea | Formula or fact |
|---|---|
| Catalyst | raises rate, regenerated, \( \Delta_r G^\circ \) and K unchanged |
| Rate enhancement | \( k_{\text{cat}}/k_{\text{uncat}} = e^{\Delta\Delta G^\ddagger/RT} \); 5.71 kJ mol⁻¹ per factor 10 at 298 K |
| Loading | mol% = 100 × n(cat)/n(substrate) |
| TON, TOF | TON = n(P)/n(cat); TOF = TON/t (initial rate preferred) |
| Yield | conversion × selectivity |
| er and ee | er = \( e^{\Delta\Delta G^\ddagger/RT} \); ee = (er − 1)/(er + 1); 90% ee ↔ 19 : 1 ↔ 7.3 kJ mol⁻¹ (298 K) |
| Saturation | rate = \( k_{\text{cat}}[\mathrm{C}]_0[\mathrm{S}]/(K+[\mathrm{S}]) \); order in S = \( K/(K+[\mathrm{S}]) \) |
| Half order in catalyst | dimeric resting state |
| Energetic span | TOF ≈ \( (k_BT/h)e^{-\delta E/RT} \); δE = T − I (TS after I) or T − I + \( \Delta_r G \) (TS before I) |
| \( k_BT/h \) | \( 6.21\times10^{12} \) s⁻¹ at 298 K |
| Not catalysts | OH⁻ in saponification, AlCl₃ in FC acylation, radical initiators |
| Deactivation | poisoning, coking, sintering, leaching, ligand loss, product inhibition |
Key Takeaways
What’s Next
- Next topic: Catalysis Across Chemistry: Acid, Organo, Phase-Transfer, Bio and Photo.
- Catalytic cycles in detail (Wilkinson, Monsanto, Wacker, cross-coupling): Homogeneous Catalysis by Organometallic Complexes.
- Surface rate laws, Sabatier volcano and industrial solids: Heterogeneous Catalysis.
- Chapter overview: Catalysis and Green Chemistry.