Skip to content

Characterisation of Inorganic Compounds

CSIR NET Chemical Sciences: IR, Raman, UV-vis, NMR, EPR, Mössbauer, NQR, mass spectrometry, XPS/UPS/Auger and microscopy for inorganic compounds.

6
Topics
95
Min read

Chapter Overview

The inorganic section of the CSIR NET Chemical Sciences syllabus ends its list of topics with characterisation of inorganic compounds, and names the tools: IR and Raman, NMR and EPR, Mössbauer, UV-vis, NQR, mass spectrometry, and electron spectroscopy and microscopic techniques. Each tool answers a different question about a compound you have made or been given:

QuestionTool
What is its symmetry? Is that CO terminal or bridging? Is thiocyanate N- or S-bound?IR and Raman
Why is it coloured, how big is Δo, what is the stoichiometry in solution?UV-vis
Which atoms are bonded to which, is it cis or trans, is it fluxional?NMR
Where is the unpaired electron, and on which atoms does it spread?EPR
What is the oxidation and spin state of iron or tin?Mössbauer
How unsymmetrical is the electric field at a nucleus, how ionic is the bond?NQR
What is the formula, how many ligands, what charge?Mass spectrometry
What is at the surface, and in which oxidation state? What does it look like?XPS, UPS, Auger; SEM, TEM, STM, AFM

This is the chapter in which the rest of inorganic chemistry is tested from the experimental side. Part C questions on coordination chemistry, organometallics and clusters often hand you a spectrum rather than a structure.

What You’ll Learn

By the end of this chapter you will be able to:

  • Count IR- and Raman-active modes from a point group, apply the mutual exclusion rule, and assign cis/trans or fac/mer carbonyl isomers from the number of ν(CO) bands
  • Use band positions to judge back-donation, bridging CO, and the binding mode of SCN⁻, NO₂⁻, SO₄²⁻ and carboxylates
  • Classify UV-vis bands by intensity and behaviour, extract Δo and Racah B, and use Beer–Lambert, Job’s and isosbestic-point analysis
  • Predict multinuclear NMR patterns, including quadrupolar nuclei and isotope satellites, and get rates from coalescence
  • Read EPR g values, hyperfine and superhyperfine patterns, and decide which ions are EPR silent
  • Assign iron and tin oxidation and spin states from isomer shifts and quadrupole splittings, and interpret NQR frequencies
  • Read isotope clusters and charge states in mass spectra, XPS chemical shifts and satellites, and choose the right microscope

Prerequisites


Learning Path

graph TD
    A["Coordination chemistry:
CFT, term symbols, magnetism"] --> C["2. UV-Visible Spectroscopy"] S["Symmetry and point groups"] --> B["1. IR and Raman"] A --> E["4. EPR"] B --> D["3. NMR (multinuclear)"] D --> E D --> F["5. Mössbauer and NQR"] E --> F C --> G["6. Mass Spectrometry,
Electron Spectroscopy, Microscopy"] F --> G G --> H["Quick Revision"]

Topics in This Chapter

#TopicWhat it coversTime
1IR and Raman SpectroscopySelection rules, mutual exclusion, depolarisation, resonance Raman, mode counts for common shapes, group frequencies, isotope shifts, ν(CO) position and band counts, SCN⁻, NO₂⁻, SO₄²⁻ and carboxylate binding modes35 min
2UV-Visible SpectroscopyBeer–Lambert law and deviations, band types and ε, CT criteria, Robin–Day classes, Δo and B from spectra, Job’s method, mole-ratio method, isosbestic points, two-component analysis, photometric titrations30 min
3NMR Spectroscopy of Inorganic CompoundsSpin-1/2 and quadrupolar nuclei, \( 2nI + 1 \), ¹⁹F/³¹P/¹¹B patterns, satellites, \( ^1J(\text{Pt–P}) \) and trans influence, hydrides, fluxionality and coalescence, contact and pseudocontact shifts, shift reagents35 min
4EPR SpectroscopyResonance condition, g values and spin–orbit coupling, anisotropy, Cu(II) ground states, hyperfine and superhyperfine lines, McConnell relation, Kramers’ theorem, zero-field splitting, g = 4.330 min
5Mössbauer and NQR SpectroscopyRecoil-free resonance, isomer shift (⁵⁷Fe and ¹¹⁹Sn), quadrupole and magnetic splitting, Prussian blue; NQR levels for I = 1, 3/2, 5/2, η, isotope ratios, Townes–Dailey ionic character35 min
6Mass Spectrometry, Electron Spectroscopy and MicroscopyIonisation methods and analysers, isotope patterns, charge states, carbonyl fragmentation, ICP-MS; XPS, UPS, Auger, EDX; SEM, TEM, HAADF, STM, AFM35 min
—Quick RevisionEvery rule, number and trap from the chapter on one page10 min

Where each official syllabus line is covered

Official topic linePage
IR and Raman1
NMR and EPR3 (NMR), 4 (EPR)
Mossbauer5 (first half)
UV-vis2
NQR5 (second half)
Mass spectrometry6
Electron spectroscopy and microscopic techniques6 (XPS, UPS, Auger, EDX; SEM, TEM, STM, AFM)

How CSIR NET Asks It

Per the NTA information bulletin for the December 2026 cycle, the Chemical Sciences paper (3 hours, 200 marks) is marked as follows:

PartQuestions givenAttemptCorrectWrongMaximum
B4035+2−0.570
C6025+4−1100

If more than the permitted number of questions is answered in a part, only the first ones answered are evaluated. The bulletin does not say how many questions come from each syllabus line. What can be said is the kind of question each technique supports:

  • Part B (recall and one-step reasoning): the number of IR or Raman bands of a molecule or carbonyl isomer; which molecule obeys mutual exclusion; the ν(CO) order in an isoelectronic series; the origin of a colour; the multiplicity of a ¹⁹F, ³¹P or ¹¹B signal; the number of EPR hyperfine lines; which ion is EPR silent; which iron compound has the largest isomer shift; an isotope pattern; XPS shift with oxidation state; STM versus AFM.
  • Part C (multi-step and data): assigning an isomer or binding mode from band counts and positions; Δo, B and β from three bands; two-component Beer–Lambert analysis; a coupling pattern plus satellites leading to a structure; coalescence rates and ΔG‡; g and A values leading to a ground state and donor count; δ and ΔE_Q leading to oxidation and spin state; NQR frequencies leading to \( e^2Qq \) or ionic character; ESI charge states and TOF times.

Quick Reference

TechniqueKey fact
IR / Ramandipole vs polarisability change; centrosymmetric: mutual exclusion
ν(CO) bandsM(CO)₆ 1; M(CO)₅L 3; cis-M(CO)₄L₂ 4, trans 1; fac 2, mer 3
UV-visA = εcl; ε ladder 1 / 10 / 10²–10³ / 10³–10⁵; Job maximum at n/(n + 1)
NMR\( 2nI + 1 \); Pt satellites 1:4:1; \( k_c = \pi\Delta\nu/\sqrt2 \)
EPR\( h\nu = g\mu_B B \); Cu 4, Mn 6, V 8 lines; \( g_\parallel > g_\perp > 2 \): \( d_{x^2-y^2} \)
Mössbauer⁵⁷Fe: more s density, lower δ; HS Fe(II) largest δ and ΔE_Q; sextet 3:2:1:1:2:3
NQRI = 3/2: \( \nu = e^2Qq/2h \); no line in cubic sites
MSCl 3:1, Br 1:1; isotope spacing 1/z
XPSKE = hν − BE − φ; BE rises with oxidation state
MicroscopySTM conductors; AFM any surface; TEM lattice; SEM topography

The coordination-chemistry ideas used throughout are in Transition Elements and Coordination Compounds, and the f-block counterpart of UV-vis and EPR reasoning is in Inner Transition Elements. For the subject overview and marking, see Chemical Sciences. Found an error? See About for how to report it.


Start Learning

→ IR and Raman Spectroscopy of Inorganic Compounds

Advertisement
Advertisement