Skip to content

Hückel Theory Applications: Charges, Bond Orders, Free Valence and Heteroatoms

CSIR NET physical chemistry: Hückel π charges, Coulson bond orders, free valence, pairing theorem, NBMO coefficients, heteroatoms and limits.

  • 16 min read
  • Updated
On this page · 16 sections
  1. Prerequisites
  2. The Hook: Where Does the Benzyl Radical React?
  3. π-Electron Density and Charge
  4. π Bond Order (Coulson)
  5. Free Valence
  6. Alternant Hydrocarbons
  7. Heteroatoms
  8. Hückel MOs and Reactivity
  9. Where Simple Hückel Fails
  10. Memory Tricks
  11. Don’t Confuse
  12. Common Mistakes
  13. Practice
  14. Quick Revision Table
  15. Key Takeaways
  16. What’s Next

Prerequisites

The Hook: Where Does the Benzyl Radical React?

π-Electron Density and Charge

If MO \( \psi_j = \sum_r c_{rj}\phi_r \) holds \( n_j \) electrons (0, 1 or 2), and overlap is neglected, the π-electron density on atom r is

Charge density and net charge
$$q_r = \sum_j n_j\,c_{rj}^2, \qquad \zeta_r = Z_r - q_r$$

\( Z_r \) is the number of π electrons atom r contributes to the neutral π system (1 for a carbon in a hydrocarbon). Summed over all atoms, \( \sum_r q_r \) equals the total number of π electrons.

Allyl, from the coefficients (\( \psi_1 = \tfrac12, \tfrac{1}{\sqrt2}, \tfrac12 \); \( \psi_2 = \tfrac{1}{\sqrt2}, 0, -\tfrac{1}{\sqrt2} \)):

Species\( q_1 = q_3 \)\( q_2 \)Net charge on C1, C3Net charge on C2
Cation (\( \psi_1^2 \))\( 2 \times \tfrac14 = 0.5 \)\( 2 \times \tfrac12 = 1 \)+0.50
Radical (\( \psi_1^2\psi_2^1 \))\( 0.5 + 0.5 = 1 \)100
Anion (\( \psi_1^2\psi_2^2 \))\( 0.5 + 1 = 1.5 \)1−0.50

The charge of the cation and anion lives entirely on the terminal carbons, which is just what the two resonance structures predict.

π Bond Order (Coulson)

Mobile (π) bond order
$$p_{rs} = \sum_j n_j\,c_{rj}\,c_{sj} \qquad (\text{r, s bonded})$$

Total bond order \( = 1 + p_{rs} \) (one σ bond plus the π part).

MoleculeBond\( p_{rs} \)Comment
EthyleneC1–C2\( 2 \times \tfrac{1}{\sqrt2} \times \tfrac{1}{\sqrt2} = 1 \)full π bond
Allyl (all charges)C1–C2\( 2 \times \tfrac12 \times \tfrac{1}{\sqrt2} = 0.707 \)\( \psi_2 \) has \( c_2 = 0 \), so adds nothing
ButadieneC1–C2\( 2(0.372 \times 0.602 + 0.602 \times 0.372) = 0.894 \)mostly double
ButadieneC2–C3\( 2(0.602 \times 0.602 - 0.372 \times 0.372) = 0.447 \)partial double
Benzeneany\( 2/3 = 0.667 \)all equal
NaphthaleneC1–C20.725shortest bond
NaphthaleneC2–C30.603

A higher π bond order means a shorter bond. Butadiene’s central bond, with \( p = 0.447 \), is shorter than a typical C–C single bond; naphthalene’s C1–C2 bond is its shortest, as X-ray structures show.

A useful identity

With overlap neglected, the total π energy can be rebuilt from charges and bond orders:

$$E_\pi = \sum_r q_r\,\alpha + 2\sum_{\text{bonds } r\text{–}s} p_{rs}\,\beta$$

Butadiene: \( 4\alpha + 2\beta(0.894 + 0.447 + 0.894) = 4\alpha + 4.472\beta \). Matches the orbital sum. Use it as a check on any bond-order calculation.

Free Valence

How much π bonding capacity does an atom have left over? Coulson defined

Free valence
$$F_r = N_{\max} - N_r, \qquad N_r = \sum_{s\ \text{bonded to}\ r} p_{rs}, \qquad N_{\max} = \sqrt3 \approx 1.732$$

\( \sqrt3 \) is the π bond-order sum of the central carbon of trimethylenemethane, C(CH₂)₃, taken as the largest a carbon atom can have. Larger \( F_r \) means more reactive toward radicals.

MoleculeAtom\( N_r \)\( F_r \)
EthyleneC110.732
AllylC1 (terminal)0.7071.025
AllylC2 (central)1.4140.318
ButadieneC10.8940.838
ButadieneC21.3410.391
Benzeneany1.3330.399
NaphthaleneC1 (α)1.2790.453
NaphthaleneC2 (β)1.3280.404

Radicals add to the ends of butadiene (1,4-addition chemistry starts at C1), and naphthalene’s α position has the larger free valence, in line with its preferred site of attack. (Some books use \( N_{\max} = 4.732 \), adding the three σ bonds; the differences between atoms are unchanged.)

Alternant Hydrocarbons

Star alternate carbon atoms. If no two starred atoms are bonded and no two unstarred atoms are bonded, the hydrocarbon is alternant. All linear polyenes, all even-membered monocyclic rings and all benzenoid hydrocarbons (benzene, naphthalene, anthracene) are alternant; any odd-membered ring breaks the pattern (fulvene, azulene, cyclopentadienyl are non-alternant).

Coulson–Rushbrooke pairing theorem (alternant hydrocarbons)
  1. Energies pair up: for every level \( \alpha + m\beta \) there is one at \( \alpha - m\beta \). Levels are symmetric about \( \alpha \).
  2. Coefficients pair up: the paired orbital has the same coefficient magnitudes, with the sign reversed on one set (starred or unstarred) of atoms.
  3. Uniform charge: in a neutral alternant hydrocarbon, every carbon has \( q_r = 1 \). There is no π charge separation, and so no π contribution to a dipole moment.
  4. Odd alternants (odd number of carbons, e.g. allyl, benzyl, pentadienyl) have at least one non-bonding MO (NBMO) at exactly \( \alpha \).

Non-alternants have no such guarantee. Azulene, a non-alternant isomer of naphthalene, has unequal π charges between its five- and seven-membered rings and a noticeable dipole moment, while naphthalene has none.

NBMO coefficients without a determinant

For an odd alternant, choose the larger set as starred. Then (Longuet-Higgins):

  1. The NBMO coefficient is zero on every unstarred atom.
  2. Around each unstarred atom, the NBMO coefficients of its starred neighbours sum to zero.
  3. Normalise.

Heteroatoms

Nitrogen and oxygen are more electronegative than carbon, so their Coulomb integrals are lower, and C–X bonds differ from C–C. The standard modification:

Heteroatom parameters
$$\alpha_X = \alpha + h_X\,\beta, \qquad \beta_{CX} = k_{CX}\,\beta$$

\( h_X > 0 \) for atoms more electronegative than carbon (remember \( \beta < 0 \), so \( \alpha_X \) lies below \( \alpha \)). The values of \( h \) and \( k \) are empirical; different books use different sets, so a CSIR NET question will state the values it wants.

Two kinds of heteroatom differ by how many π electrons they give:

  • Pyridine-type N (one π electron; its lone pair is in the σ plane): smaller \( h \).
  • Pyrrole-type N (two π electrons; its lone pair is part of the π system): larger \( h \), because the atom is formally positive in the delocalised structure.

Hückel MOs and Reactivity

  • Ionisation energy and electron affinity. Within the model, the HOMO energy tracks ionisation energy and the LUMO energy tracks electron affinity across a series of related hydrocarbons; reduction potentials of aromatic hydrocarbons correlate with LUMO energies.
  • Frontier orbitals. Electrophiles attack where the HOMO coefficient is largest; nucleophiles where the LUMO coefficient is largest.
  • Pericyclic reactions. The phases of Hückel MOs are the input to the Woodward–Hoffmann rules. In butadiene’s HOMO (\( \psi_2 \): 0.602, 0.372, −0.372, −0.602) the terminal coefficients have opposite signs, so thermal ring closure to cyclobutene must be conrotatory; photochemically, the HOMO is \( \psi_3 \) (terminal coefficients of the same sign) and closure is disrotatory.

Where Simple Hückel Fails

AssumptionConsequenceBetter method
Overlap \( S = 0 \)levels symmetric about \( \alpha \); antibonding levels too lowinclude \( S \) (levels \( (\alpha + m\beta)/(1 + mS) \))
All \( \beta \) equalno bond alternation; polyene gap goes to zero for long chainsvariable-β methods
No electron–electron repulsionsinglet and triplet of the same configuration have the same energy; ion energies poorPariser–Parr–Pople (PPP)
σ–π separation, π onlycannot treat σ bonds or non-planar moleculesextended Hückel (all valence orbitals, overlap included)
Parameters \( \alpha \), \( \beta \) empiricalnumbers depend on the property fittedab initio and density functional methods

The model’s lasting value is qualitative and topological: node counts, degeneracies, aromaticity, signs of coefficients, and trends within a series.

Memory Tricks

Don’t Confuse

ThisvsThat
π-electron density \( q_r \) (number of π electrons on r)net charge \( \zeta_r = 1 - q_r \) for a carbon
π bond order \( p_{rs} \) (0 to 1)total bond order \( 1 + p_{rs} \)
Free valence (unused π bonding capacity, radical attack)charge density (electrophilic or nucleophilic attack)
Alternant (naphthalene): uniform charge, no π dipolenon-alternant (azulene): unequal charges, dipole
Pyridine N: 1 π electronpyrrole N: 2 π electrons

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. What is the π bond order of the C2–C3 bond in butadiene?
  2. What is the net π charge on C1 of the allyl anion?
  3. What is the π-electron density on every carbon of neutral naphthalene in simple Hückel theory?
Answers
  1. 0.447 (total bond order 1.447).
  2. −0.5: \( q_1 = 2(\tfrac12)^2 + 2(\tfrac{1}{\sqrt2})^2 = 1.5 \).
  3. 1 on every carbon: naphthalene is an even alternant hydrocarbon.

Level 2: Part B Style

Practice Q1. The π bond order of a C–C bond in benzene, in simple Hückel theory, is:

(a) 0.500 (b) 0.667 (c) 1.000 (d) 1.667

Answer: (b)

Occupied MOs: \( \psi_1 = \tfrac{1}{\sqrt6}(1,1,1,1,1,1) \) and the degenerate pair at \( \alpha + \beta \). \( \psi_1 \) contributes \( 2 \times \tfrac16 = \tfrac13 \) to every bond and the degenerate pair together another \( \tfrac13 \): \( p = 2/3 \). (d) is the total bond order.

Practice Q2. The free valence of the terminal carbon of butadiene (with \( N_{\max} = \sqrt3 \)) is:

(a) 0.391 (b) 0.732 (c) 0.838 (d) 1.025

Answer: (c)

C1 has one neighbour: \( N_1 = p_{12} = 0.894 \); \( F_1 = 1.732 - 0.894 = 0.838 \). (a) is C2, (b) ethylene, (d) the allyl terminal carbon.

Practice Q3. Which hydrocarbon is non-alternant?

(a) naphthalene (b) 1,3,5-hexatriene (c) azulene (d) benzyl radical

Answer: (c)

Azulene contains a five- and a seven-membered ring: starring alternate atoms inevitably puts two starred atoms next to each other. The other three can be starred alternately.

Practice Q4. In the benzyl cation, simple Hückel theory places the positive charge:

(a) only on CH₂ (b) 4/7 on CH₂ and 1/7 on each ortho and para carbon (c) 4/7 on CH₂ and 1/7 on each meta carbon and the para carbon (d) equally on all seven carbons

Answer: (b)

The cation has an empty NBMO; the net charge on each atom is the square of its NBMO coefficient: \( (2/\sqrt7)^2 = 4/7 \) on CH₂ and \( 1/7 \) on each of the two ortho and the para carbon. Meta and ipso have zero NBMO coefficient. The total is \( 4/7 + 3/7 = 1 \).

Level 3: Part C Style

Practice Q5. For a two-centre π system C=X, take \( \alpha_X = \alpha + \beta \) and \( \beta_{CX} = \beta \) (two π electrons). Which statements are correct?

  1. The bonding π MO lies at \( \alpha + 1.618\beta \).
  2. The net π charge on X is about \( -0.45 \).
  3. The LUMO has its larger coefficient on carbon.
  4. The π bond order is 1, as in ethylene.

(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only

\( m^2 - m - 1 = 0 \): \( m = 1.618 \) and \( -0.618 \).

Bonding coefficients: \( c_C = 0.526 \), \( c_X = 0.851 \).

  1. Correct.
  2. Correct. \( q_X = 2(0.851)^2 = 1.447 \); net charge \( 1 - 1.447 = -0.447 \).
  3. Correct. The LUMO is the mirror image: \( c_C = 0.851 \), \( c_X = -0.526 \).
  4. Wrong. \( p = 2 \times 0.526 \times 0.851 = 0.894 \): polarisation reduces the π bond order below 1.

Practice Q6. For the pentadienyl radical (five-carbon open chain, 5 π electrons), which statements are correct?

  1. It has an NBMO at \( \alpha \) with zero coefficient on C2 and C4.
  2. The NBMO coefficients on C1, C3 and C5 are proportional to 1, −1, 1.
  3. The unpaired spin density on C3 is 1/3.
  4. The pentadienyl cation carries a net charge of +1/3 on each of C1, C3 and C5.

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 1, 2, 3 and 4 (d) 2, 3 and 4 only

Answer: (c) 1, 2, 3 and 4

Star C1, C3, C5 (the larger set).

  1. Correct. NBMO coefficients vanish on unstarred C2 and C4.
  2. Correct. Around C2: \( c_1 + c_3 = 0 \); around C4: \( c_3 + c_5 = 0 \). So \( c_1 : c_3 : c_5 = 1 : -1 : 1 \).
  3. Correct. Normalised: each \( \pm1/\sqrt3 \), so each has \( c^2 = 1/3 \).
  4. Correct. With the NBMO empty, the net charge equals \( c^2 \): \( +1/3 \) on C1, C3, C5.

Check against the general formula: \( c_{rk} = \sqrt{2/6}\sin(rk\pi/6) \) with \( k = 3 \) gives \( \sqrt{1/3}(1, 0, -1, 0, 1) \).

Practice Q7. Hückel data for naphthalene (with \( N_{\max} = \sqrt3 \)): free valence C1 0.453, C2 0.404; π bond orders C1–C2 0.725, C2–C3 0.603, C1–C8a 0.555, C4a–C8a 0.518. Which conclusions follow within the model?

  1. Radical attack is predicted to favour C1 over C2.
  2. The C1–C2 bond is predicted to be the shortest C–C bond.
  3. The π charge on C1 is greater than on C2.
  4. The ring-fusion bond C4a–C8a has the lowest π bond order of the four listed.

(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 4 only
  1. Correct. Higher free valence at C1.
  2. Correct. Highest π bond order, 0.725.
  3. Wrong. Naphthalene is an even alternant hydrocarbon; every carbon has \( q_r = 1 \). Differences in reactivity come from free valence or localisation energy, not charge.
  4. Correct. 0.518 is the lowest value listed.

Quick Revision Table

IdeaFact
Charge density\( q_r = \sum_j n_j c_{rj}^2 \); net charge \( 1 - q_r \)
π bond order\( p_{rs} = \sum_j n_j c_{rj}c_{sj} \); total \( 1 + p_{rs} \)
Energy identity\( E_\pi = \sum q_r\alpha + 2\sum p_{rs}\beta \)
Bond ordersethylene 1; allyl 0.707; butadiene 0.894, 0.447; benzene 0.667
Free valence\( F_r = \sqrt3 - \sum p_{rs} \); butadiene C1 0.838, C2 0.391; benzene 0.399
Allyl chargescation +0.5 on C1, C3; anion −0.5 on C1, C3; C2 zero
Alternantenergies \( \pm m \) paired; neutral: all \( q_r = 1 \); odd: NBMO at \( \alpha \)
NBMO rulezero on unstarred; starred neighbours sum to zero
Benzyl NBMOCH₂ 4/7; ortho, para 1/7 each
Heteroatom\( \alpha_X = \alpha + h\beta \), \( \beta_{CX} = k\beta \)
C=X (h = k = 1)\( \alpha + 1.618\beta \); charge on X −0.447; LUMO on C

Key Takeaways

What’s Next

Advertisement
Advertisement