Rate Laws, Integrated Rate Equations and Temperature Dependence
CSIR NET chemical kinetics: rate laws, order and molecularity, integrated rate equations, half-lives, finding order, Arrhenius equation and activation energy.
- 19 min
On this page · 14 sections
Prerequisites
- Logarithms, exponentials and quick slope reading from a straight-line plot. If these are slow, drill them in Numerical Ability first.
- Simple separable differential equations (\( dy/dt = -ky \Rightarrow y = y_0 e^{-kt} \)).
- Part of the chapter Chemical Kinetics. Radioactive decay is the cleanest first-order process you already know: see Nuclear Stability and Radioactive Decay.
The Hook: The Rule Every Lab Notebook Quotes
Rate, Rate Law and Order
Rate of reaction
For a reaction \( aA + bB \rightarrow cC + dD \) the rate of reaction (IUPAC: rate of conversion per unit volume) is defined so that it is the same whichever species is followed:
$$v = -\frac{1}{a}\frac{d[\mathrm{A}]}{dt} = -\frac{1}{b}\frac{d[\mathrm{B}]}{dt} = \frac{1}{c}\frac{d[\mathrm{C}]}{dt} = \frac{1}{d}\frac{d[\mathrm{D}]}{dt}$$For \( 2\mathrm{N_2O_5} \rightarrow 4\mathrm{NO_2} + \mathrm{O_2} \), the rate of formation of NO₂ is four times the rate of formation of O₂ and twice the rate of loss of N₂O₅. A question that quotes “the rate constant” must tell you which species it is defined for; if it does not, assume the definition above.
Rate law
The rate law is an experimentally determined expression for the rate in terms of concentrations:
$$v = k[\mathrm{A}]^{\alpha}[\mathrm{B}]^{\beta}\cdots$$- \( k \) is the rate constant (rate coefficient): independent of concentration, dependent on temperature (and, for reactions of ions, on ionic strength).
- \( \alpha \) is the order with respect to A; \( \alpha + \beta + \cdots \) is the overall order.
- Orders are found by experiment. They need not equal the stoichiometric coefficients and need not be integers: the thermal decomposition of acetaldehyde is of order 3/2, and the H₂ + Br₂ reaction has a rate law with no single overall order (both are derived on Reaction Mechanisms and Chain Reactions).
Order versus molecularity
| Order | Molecularity | |
|---|---|---|
| Defined for | the overall reaction (empirical rate law) | an elementary step only |
| Found by | experiment | the proposed mechanism |
| Values | 0, integer, fraction, negative, or undefined | 1, 2, rarely 3; never zero or fractional |
| Meaning | exponent in the rate law | number of species that collide in that step |
For an elementary step, and only for an elementary step, the order equals the molecularity: a bimolecular step \( \mathrm{A + B} \rightarrow \) products has rate \( k[\mathrm{A}][\mathrm{B}] \).
Units of the rate constant
For an \( n \)th-order rate law with concentrations in mol L⁻¹ and time in s:
$$\boxed{[k] = (\text{mol L}^{-1})^{1-n}\ \text{s}^{-1}}$$| Order | Units of k |
|---|---|
| 0 | mol L⁻¹ s⁻¹ |
| 1 | s⁻¹ |
| 2 | L mol⁻¹ s⁻¹ |
| 3 | L² mol⁻² s⁻¹ |
| 3/2 | L^1/2 mol^−1/2 s⁻¹ |
Reading units backwards gives the order: a constant in L mol⁻¹ min⁻¹ belongs to a second-order law.
Integrated Rate Equations
Write \( a = [\mathrm{A}]_0 \) and \( [\mathrm{A}] = a - x \) after time \( t \). All of these assume a single reactant (or several reactants in stoichiometric ratio) and \( -d[\mathrm{A}]/dt = k[\mathrm{A}]^n \).
| Order | Differential form | Integrated form | Linear plot | Half-life |
|---|---|---|---|---|
| 0 | \( -d[\mathrm{A}]/dt = k \) | \( [\mathrm{A}] = [\mathrm{A}]_0 - kt \) | [A] vs t, slope −k | \( [\mathrm{A}]_0/2k \) |
| 1 | \( -d[\mathrm{A}]/dt = k[\mathrm{A}] \) | \( \ln([\mathrm{A}]_0/[\mathrm{A}]) = kt \) | ln[A] vs t, slope −k | \( \ln 2/k \) |
| 2 | \( -d[\mathrm{A}]/dt = k[\mathrm{A}]^2 \) | \( 1/[\mathrm{A}] - 1/[\mathrm{A}]_0 = kt \) | 1/[A] vs t, slope +k | \( 1/(k[\mathrm{A}]_0) \) |
| n ≠ 1 | \( -d[\mathrm{A}]/dt = k[\mathrm{A}]^n \) | \( \frac{1}{n-1}\left(\frac{1}{[\mathrm{A}]^{n-1}} - \frac{1}{[\mathrm{A}]_0^{n-1}}\right) = kt \) | \( [\mathrm{A}]^{1-n} \) vs t | \( \frac{2^{n-1}-1}{(n-1)k[\mathrm{A}]_0^{n-1}} \) |
The general half-life formula reduces to the zero- and second-order entries for \( n = 0 \) and \( n = 2 \). The key consequence:
$$\boxed{t_{1/2} \propto [\mathrm{A}]_0^{\,1-n}}$$Zero order: half-life grows with initial concentration. First order: half-life is constant. Second order: half-life halves when the initial concentration doubles.
First-order reactions in detail
First order is the case Part B uses most:
- \( [\mathrm{A}] = [\mathrm{A}]_0 e^{-kt} \); with base-10 logs, \( k = \dfrac{2.303}{t}\log\dfrac{a}{a-x} \).
- Fractional lives are constant. The time to fall to any fixed fraction is independent of \( [\mathrm{A}]_0 \). 75 % completion takes two half-lives; 87.5 % takes three; 99.9 % takes about ten.
- \( t_{90\%}/t_{50\%} = \ln 10/\ln 2 = 3.32 \).
- Mean lifetime \( \tau = 1/k = t_{1/2}/\ln 2 \).
- Any property linear in concentration (absorbance, conductance, volume of titrant, optical rotation, gas pressure) can replace concentration. For a property \( P \) read at time 0, t and infinity: \( kt = \ln\dfrac{P_\infty - P_0}{P_\infty - P_t} \). This is how the acid-catalysed inversion of sucrose is followed by polarimetry.
Second order with two different reactants
For \( \mathrm{A + B} \rightarrow \) products with rate \( k[\mathrm{A}][\mathrm{B}] \) and \( a \ne b \):
$$kt = \frac{1}{a-b}\ln\frac{b(a-x)}{a(b-x)}$$If \( b \gg a \), [B] barely changes and the reaction behaves as first order in A with \( k' = k[\mathrm{B}]_0 \): pseudo-first-order kinetics. Ester hydrolysis in water (water in vast excess) and sucrose inversion are the classic examples.
Determining the Order
graph TD
A["Kinetic data"] --> B{"What was measured?"}
B -->|"Initial rate at several [A]0"| C["Initial-rate method:
log v0 vs log [A]0, slope = order"]
B -->|"[A] against time, one run"| D["Integration (graphical) method:
which of [A], ln[A], 1/[A] is linear?"]
B -->|"Half-life at two [A]0"| E["Half-life method:
n = 1 + log(t1/t1') / log(a'/a)"]
B -->|"Several reactants"| F["Isolation (flooding):
pseudo-order for each in turn"]| Method | How it works | Watch for |
|---|---|---|
| Initial rates | Change one initial concentration at a time; if doubling [A] multiplies the rate by \( 2^\alpha \), the order is \( \alpha \) | Products cannot interfere because almost none have formed |
| Integration (graphical) | Plot [A], ln[A] and 1/[A] against t; the straight one gives the order | Needs data over at least two to three half-lives to discriminate |
| Half-life (fractional life) | \( n = 1 + \dfrac{\log(t_{1/2}/t_{1/2}')}{\log(a'/a)} \) | Works for any fractional life, not only the half |
| Isolation (Ostwald) | Flood all but one reactant | Gives pseudo-order; true k from \( k' \) |
| Differential (van ’t Hoff) | \( \log v = \log k + n\log[\mathrm{A}] \); slope of log v vs log [A] | Rates from tangents are noisy |
Temperature Dependence
The Arrhenius equation
$$\boxed{k = A\,e^{-E_a/RT}} \qquad \ln k = \ln A - \frac{E_a}{R}\cdot\frac{1}{T}$$- \( A \): the pre-exponential (frequency) factor, in the same units as k.
- \( E_a \): the activation energy, from the slope \( -E_a/R \) of \( \ln k \) against \( 1/T \) (or \( -E_a/2.303R \) with log₁₀).
Two temperatures give the working form:
$$\ln\frac{k_2}{k_1} = \frac{E_a}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right)$$The general, model-free definition (IUPAC) is
$$E_a = RT^2\,\frac{d\ln k}{dT}$$which holds even when the Arrhenius plot is curved; \( E_a \) is then itself temperature dependent.
What the activation energy means
graph LR
R["Reactants"] -->|"climb Ea (forward)"| TS["Activated complex
(top of barrier)"]
TS -->|"descend Ea(reverse)"| P["Products"]For an elementary reaction, \( E_a \) is the barrier height above the reactants (more exactly, Tolman’s interpretation: the average energy of reacting molecules minus the average energy of all reactant molecules). Forward and reverse barriers are related through the reaction enthalpy:
$$E_{a,\text{f}} - E_{a,\text{r}} \approx \Delta_r H$$(exactly \( \Delta_r U \) for the Arrhenius energies of an elementary gas-phase pair; the difference is a few RT at most).
- An endothermic elementary reaction has \( E_{a,\text{f}} \ge \Delta_r H \).
- A catalyst lowers \( E_a \) for the forward and reverse reactions by the same amount, so it does not change \( K \).
Rate constants and the equilibrium constant
For an elementary reversible step \( \mathrm{A} \rightleftharpoons \mathrm{B} \), at equilibrium the forward and reverse rates are equal (detailed balance), so
$$K = \frac{k_f}{k_r}$$Differentiating \( \ln K = \ln k_f - \ln k_r \) with respect to T and using the van ’t Hoff equation gives \( E_{a,\text{f}} - E_{a,\text{r}} = \Delta_r H^\circ \) (to within RT terms), the relation above.
Activation energy of a composite reaction
If the observed rate constant is a product and ratio of elementary constants, \( k_{\text{obs}} = k_1^{p}k_2^{q}k_3^{-r}\cdots \), then
$$\boxed{E_{a,\text{obs}} = pE_1 + qE_2 - rE_3 + \cdots}$$This rule produces the classic surprises:
- Negative activation energy. In \( 2\mathrm{NO} + \mathrm{O_2} \rightarrow 2\mathrm{NO_2} \), a fast exothermic pre-equilibrium \( 2\mathrm{NO} \rightleftharpoons \mathrm{N_2O_2} \) is followed by a slower step. \( k_{\text{obs}} = K_1k_2 \), and \( E_{\text{obs}} = \Delta H_1 + E_2 \) is negative because \( \Delta H_1 \) is more negative than \( E_2 \) is positive. The rate constant falls as temperature rises (treated on Complex Reactions and the Steady-State Approximation).
- Fractional combinations. For the Rice–Herzfeld decomposition of acetaldehyde, \( k = k_2(k_1/2k_4)^{1/2} \), so \( E_a = E_2 + \tfrac{1}{2}(E_1 - E_4) \).
- Parallel reactions. If A gives two products with constants \( k_1 \) and \( k_2 \), the observed \( E_a = (k_1E_1 + k_2E_2)/(k_1+k_2) \), which drifts with temperature.
Beyond simple Arrhenius behaviour
| Behaviour | Cause | Form |
|---|---|---|
| Curved Arrhenius plot | A depends on T (from theory, \( A \propto T^{1/2} \) in collision theory, \( \propto T \) from \( k_BT/h \)) | modified Arrhenius \( k = aT^m e^{-E_0/RT} \) |
| Curvature upward at low T | quantum-mechanical tunnelling (H-atom transfers) | \( E_a \) falls at low T |
| Rate maximum with T | enzyme denaturation; a pre-equilibrium shifting | not one barrier |
| \( E_a \) apparently zero | radical–radical recombination | barrierless |
| Negative \( E_a \) | pre-equilibrium with exothermic first step; some ion–molecule and radical association reactions | \( k \) falls with T |
With a modified Arrhenius form \( k = aT^m e^{-E_0/RT} \), the definition \( E_a = RT^2\,d\ln k/dT \) gives \( E_a = E_0 + mRT \). This is why transition-state theory relates \( E_a \) and \( \Delta H^\ddagger \) through RT terms (see Collision, Transition-State and Unimolecular Theories).
Fast Reactions: How Short Half-Lives Are Measured
Conventional mixing takes about a second, so faster reactions need other methods. CSIR NET mostly asks which method suits which timescale.
| Technique | Principle | Approximate time range |
|---|---|---|
| Stopped-flow | rapid mixing then stop; follow by absorbance or fluorescence | milliseconds |
| Flash photolysis / pump–probe | a light pulse creates intermediates; follow decay spectroscopically | microseconds (flash lamps) down to femtoseconds (lasers) |
| Relaxation (temperature jump, pressure jump) | perturb an equilibrium, watch it relax with time constant \( \tau \) | microseconds and shorter |
| NMR line broadening | exchange broadens or coalesces lines | timescale set by the frequency separation |
Relaxation kinetics is derived on the complex reactions page: for \( \mathrm{A} \rightleftharpoons \mathrm{B} \), \( 1/\tau = k_f + k_r \).
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Order: empirical, any value | Molecularity: elementary step only, 1, 2 or 3 | |
| \( t_{1/2} = 0.693/k \) (first order, independent of a) | \( t_{1/2} = 1/ka \) (second order, falls with a) | |
| Rate of reaction (divided by coefficient) | rate of formation of one species | |
| Pseudo-first-order constant \( k' = k[\mathrm{B}]_0 \) | true second-order constant k | |
| \( E_a \) (Arrhenius, from slope) | \( \Delta H^\ddagger \) (TST), differs by RT terms | |
| Catalyst lowers \( E_a \) both ways | Catalyst changes K (it does not) | |
| Mean life \( \tau = 1/k \) | half-life \( 0.693/k \) |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- Give the units of a third-order rate constant with concentration in mol L⁻¹ and time in s.
- A first-order reaction has \( k = 0.0231\ \text{min}^{-1} \). What is its half-life?
- How does the half-life of a zero-order reaction change when the initial concentration is doubled?
Answers
- L² mol⁻² s⁻¹, from \( (\text{mol L}^{-1})^{1-3}\,\text{s}^{-1} \).
- 30 min: \( 0.693/0.0231 = 30.0 \) min.
- It doubles, since \( t_{1/2} = [\mathrm{A}]_0/2k \).
Level 2: Part B Style
Practice Q1. A first-order reaction is 75 % complete in 40 min. The time needed for 87.5 % completion is:
(a) 50 min (b) 60 min (c) 70 min (d) 80 min
Answer: (b) 60 min
75 % completion is two half-lives, so \( t_{1/2} = 20 \) min. 87.5 % completion is three half-lives: 60 min. Option (d) assumes 87.5 % takes four half-lives.
Practice Q2. The rate constant of a reaction doubles when the temperature rises from 300 K to 310 K. The activation energy is closest to (R = 8.314 J K⁻¹ mol⁻¹):
(a) 23 kJ/mol (b) 36 kJ/mol (c) 54 kJ/mol (d) 124 kJ/mol
Answer: (c) 54 kJ/mol
\( E_a = R\ln 2/(1/300 - 1/310) = (8.314 \times 0.6931)/(1.0753\times10^{-4}) = 53.6 \) kJ/mol. Option (a) is what you get by using log₁₀ 2 instead of ln 2 (53.6 / 2.303 ≈ 23).
Practice Q3. For a reaction \( \mathrm{A} \rightarrow \) products, the half-life is 200 s when \( [\mathrm{A}]_0 = 0.10 \) M and 50 s when \( [\mathrm{A}]_0 = 0.40 \) M. The order and rate constant are:
(a) first order, \( 3.5\times10^{-3}\ \text{s}^{-1} \) (b) second order, \( 0.05\ \text{L mol}^{-1}\text{s}^{-1} \) (c) second order, \( 0.20\ \text{L mol}^{-1}\text{s}^{-1} \) (d) third order, \( 0.50\ \text{L}^2\text{mol}^{-2}\text{s}^{-1} \)
Answer: (b)
\( n = 1 + \log(200/50)/\log(0.40/0.10) = 1 + 1 = 2 \). For second order, \( k = 1/(t_{1/2}[\mathrm{A}]_0) = 1/(200 \times 0.10) = 0.05\ \text{L mol}^{-1}\text{s}^{-1} \). The 50 s, 0.40 M pair gives the same value.
Practice Q4. Which statement about a catalyst for an elementary reversible reaction is correct?
(a) It lowers the forward activation energy only (b) It increases the equilibrium constant (c) It lowers forward and reverse activation energies by the same amount (d) It changes the reaction enthalpy
Answer: (c)
The catalysed path has a lower barrier, but reactants and products are unchanged, so \( \Delta_r H \) and \( K = k_f/k_r \) are unchanged. Lowering both barriers equally multiplies \( k_f \) and \( k_r \) by the same factor.
Level 3: Part C Style
Practice Q5. For \( 2\mathrm{A} \rightarrow \) products (rate defined as \( -d[\mathrm{A}]/dt \)), the following data were obtained at constant temperature:
| t / min | 0 | 10 | 20 | 40 |
|---|---|---|---|---|
| [A] / M | 0.100 | 0.0667 | 0.0500 | 0.0333 |
Which set is correct?
(a) first order, \( k = 0.041\ \text{min}^{-1} \), \( t_{1/2} = 17 \) min (b) second order, \( k = 0.50\ \text{L mol}^{-1}\text{min}^{-1} \), \( t_{1/2} = 20 \) min (c) second order, \( k = 5.0\ \text{L mol}^{-1}\text{min}^{-1} \), \( t_{1/2} = 2 \) min (d) zero order, \( k = 1.7\times10^{-3}\ \text{M min}^{-1} \), \( t_{1/2} = 30 \) min
Answer: (b)
Compute 1/[A]: 10.0, 15.0, 20.0, 30.0 L/mol at 0, 10, 20, 40 min. The increase is 0.50 L mol⁻¹ per minute throughout, so 1/[A] is linear in t: second order with \( k = 0.50\ \text{L mol}^{-1}\text{min}^{-1} \).
Check against first order: \( \ln(0.100/0.0667) = 0.405 \) in 10 min but \( \ln(0.100/0.0500) = 0.693 \) in 20 min, not 0.810, so not first order. The data also confirm the half-life directly: [A] falls to 0.050 M at 20 min, and \( 1/(k[\mathrm{A}]_0) = 1/(0.50 \times 0.100) = 20 \) min.
Practice Q6. A first-order reaction has \( k = 1.0\times10^{-3}\ \text{s}^{-1} \) at 300 K and \( E_a = 100 \) kJ/mol. Consider the statements:
- At 320 K, k is about \( 1.2\times10^{-2}\ \text{s}^{-1} \).
- At 320 K, the half-life is about 57 s.
- If a catalyst lowers \( E_a \) by 10 kJ/mol at 300 K without changing A, k rises by a factor of about 55.
- The pre-exponential factor has units of L mol⁻¹ s⁻¹.
Which are correct?
(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2 and 4 only (d) 1, 3 and 4 only
Answer: (b) 1, 2 and 3 only
- \( \ln(k_2/k_1) = (100000/8.314)(1/300 - 1/320) = 2.506 \); ratio 12.25; \( k_2 = 1.23\times10^{-2}\ \text{s}^{-1} \). Correct.
- \( t_{1/2} = 0.693/0.01225 = 56.6 \) s. Correct.
- Factor \( e^{10000/(8.314\times300)} = e^{4.01} = 55 \). Correct.
- A has the units of k, here s⁻¹. Wrong.
Practice Q7. The rate constant of a gas-phase reaction decreases as temperature increases. Which explanations are consistent with this observation?
- The reaction proceeds through a fast pre-equilibrium that is exothermic, followed by a rate-determining step with a small barrier.
- The reaction is an elementary bimolecular step with a large positive activation energy.
- The observed constant is \( k_{\text{obs}} = K_1k_2 \) with \( \Delta H_1 + E_2 < 0 \).
- The reaction is endothermic overall, so its rate constant must fall with temperature.
(a) 1 and 3 only (b) 2 and 4 only (c) 1, 3 and 4 only (d) 3 only
Answer: (a) 1 and 3 only
Statements 1 and 3 describe the same thing: \( E_{\text{obs}} = \Delta H_1 + E_2 \), negative when the exothermic pre-equilibrium outweighs the small barrier (the textbook case is \( 2\mathrm{NO} + \mathrm{O_2} \)). Statement 2 would give a rate constant that rises steeply with T. Statement 4 confuses thermodynamics with kinetics: an endothermic elementary reaction has a barrier at least as large as \( \Delta_r H \), so its forward k rises with T.
Quick Revision Table
| Idea | Fact |
|---|---|
| Rate of reaction | \( -\frac{1}{a}\frac{d[\mathrm{A}]}{dt} = \frac{1}{c}\frac{d[\mathrm{C}]}{dt} \) |
| Order vs molecularity | empirical, any value vs elementary, 1–3 |
| Units of k | \( (\text{mol L}^{-1})^{1-n}\,\text{s}^{-1} \) |
| Zero order | \( [\mathrm{A}] = [\mathrm{A}]_0 - kt \); \( t_{1/2} = [\mathrm{A}]_0/2k \) |
| First order | \( \ln([\mathrm{A}]_0/[\mathrm{A}]) = kt \); \( t_{1/2} = 0.693/k \); \( \tau = 1/k \) |
| Second order | \( 1/[\mathrm{A}] - 1/[\mathrm{A}]_0 = kt \); \( t_{1/2} = 1/k[\mathrm{A}]_0 \) |
| Half-life rule | \( t_{1/2} \propto [\mathrm{A}]_0^{1-n} \); \( n = 1 + \log(t/t')/\log(a'/a) \) |
| First-order fractions | 75 % = 2, 87.5 % = 3, 99.9 % ≈ 10 half-lives |
| Arrhenius | \( k = Ae^{-E_a/RT} \); \( \ln(k_2/k_1) = (E_a/R)(1/T_1 - 1/T_2) \) |
| General \( E_a \) | \( RT^2\,d\ln k/dT \) |
| Composite \( E_a \) | \( k = k_1^pk_2^q/k_3^r \Rightarrow E = pE_1 + qE_2 - rE_3 \) |
| Forward vs reverse | \( E_f - E_r \approx \Delta_r H \); \( K = k_f/k_r \) |
| Fast methods | stopped-flow (ms), flash photolysis, T-jump relaxation (µs and below) |
Key Takeaways
What’s Next
- Complex Reactions and the Steady-State Approximation: reversible, parallel and consecutive reactions, relaxation, pre-equilibria.
- Reaction Mechanisms and Chain Reactions: from a rate law to a mechanism.
- The same rate equations govern enzyme kinetics in Life Sciences: Enzymes: Catalysis, Kinetics and Regulation.
- Chemical Kinetics: Quick Revision.