Chemical Sciences / Colloids and Surfaces
/ Topic 5 of 5 · 5/5 Colloids and Surfaces Formula Sheet and Short Notes One-page CSIR NET revision: colloids, micelles, Stokes–Einstein, double layer, DLVO, Schulze–Hardy, Langmuir, BET, Gibbs adsorption and heterogeneous catalysis.
7 min read Updated 16 Nov 2026
Share
Copy link
Print · PDF
Save Share this topic
csirnetnotes.com/chemical-sciences/colloids-and-surfaces/quick-revision
Copy link Ctrl C Pre-written message Colloids and Surfaces Formula Sheet and Short Notes — notes, formulas and practice, free. csirnetnotes.com/chemical-sciences/colloids-and-surfaces/quick-revision
On this page · 8 sections▾ Colloids: Types and Micelles Kinetic and Optical Properties Charge, Double Layer and Electrokinetics Stability and Coagulation Adsorption Heterogeneous Catalysis Last-Minute Traps Where Next The whole unit on one page. For explanations and worked problems, go back to the chapter : Colloids: Classification and Properties , Double Layer and Colloid Stability , Adsorption Isotherms and Surface Area and Heterogeneous Catalysis .
Colloids: Types and Micelles Fact Detail Size range about 1 nm–1 µm in at least one dimension Phase types sol, emulsion, foam, solid aerosol, liquid aerosol, gel, solid foam, solid sol; no gas-in-gas Lyophilic solvated, reversible, stable, viscous, weak Tyndall; starch, gelatin, proteins Lyophobic charge-stabilised only, irreversible, coagulated by a little salt, strong Tyndall; metal sols, As₂S₃, Fe(OH)₃ Condensation methods double decomposition (As₂S₃), hydrolysis (Fe(OH)₃), reduction (Au), oxidation (S) Dispersion methods Bredig arc (metal sols), peptisation , colloid mill Purification dialysis, electrodialysis (electrolytes only), ultrafiltration CMC break in γ, κ (slope falls), Λ, turbidity, dye solubilisation CMC trends falls with longer tail, added salt; non-ionic far lower than ionic Krafft point / cloud point no micelles below Krafft T (ionic); non-ionic separates above cloud point \( \Delta G^\circ_{\text{mic}} \) \( RT\ln x_{\text{CMC}} \) (mole fraction; divide M by 55.5); \( (1+\beta) \) for ionic Driving force entropy (hydrophobic effect)Packing parameter \( v/a_0l_c \): < 1/3 sphere; 1/3–1/2 rod; 1/2–1 bilayer/vesicle; > 1 inverted
Kinetic and Optical Properties Fact Detail Brownian motion \( \langle x^2\rangle = 2Dt \); \( \langle r^2\rangle = 6Dt \) Stokes–Einstein \( D = k_BT/(6\pi\eta r) \); DLS gives hydrodynamic radius Stokes settling \( v = 2r^2(\rho_p-\rho)g/9\eta \) (∝ r²) Sedimentation coefficient \( s = v/\omega^2r = m(1-\bar v\rho)/f \); 1 S = 10⁻¹³ s Svedberg \( M = sRT/[D(1-\bar v\rho)] \) Sedimentation equilibrium \( c_2/c_1 = \exp[M(1-\bar v\rho)\omega^2(r_2^2-r_1^2)/2RT] \) Perrin \( n_h/n_0 = \exp(-m_{\text{eff}}gh/k_BT) \), \( m_{\text{eff}} = \tfrac43\pi r^3(\rho_p-\rho) \) Einstein viscosity \( \eta = \eta_0(1+2.5\phi) \) Molar-mass averages osmometry \( M_n \); light scattering, sedimentation equilibrium \( M_w \); \( M_w \ge M_n \) Rayleigh \( I \propto r^6/\lambda^4 \); (650/450)⁴ = 4.35 Debye–Zimm \( Kc/R_\theta = 1/M_w + 2A_2c \) Ultramicroscope particles as points of light; number and motion, not shape Gold sol colour red (small) → blue (large or aggregated)
Charge, Double Layer and Electrokinetics Fact Detail Positive sols Fe(OH)₃, Al(OH)₃, AgI in excess AgNO₃, basic dyes Negative sols As₂S₃, Au, Ag, Pt, clay, starch, AgI in excess KI, acid dyes Models Helmholtz (rigid) → Gouy–Chapman (diffuse) → Stern (compact + diffuse)Diffuse potential \( \psi = \psi_0e^{-\kappa x} \) Debye length \( \kappa^{-1} = 0.304/\sqrt{I} \) nm (water, 25 °C); 1 mM 1:1 → 9.6 nm; 0.1 M → 0.96 nm Ionic strength \( I = \tfrac12\sum c_iz_i^2 \) (0.01 M MgSO₄ → 0.04 M) Zeta potential at the plane of shear; IEP where ζ = 0; stable sols typically |ζ| above about 30 mV Field → motion electrophoresis (particles), electro-osmosis (liquid)Motion → potential streaming potential (liquid), sedimentation potential (particles)Smoluchowski \( u = \varepsilon\zeta/\eta \), \( \kappa a \gg 1 \) Hückel \( u = 2\varepsilon\zeta/3\eta \), \( \kappa a \ll 1 \)
Stability and Coagulation Fact Detail DLVO \( V_T = V_R + V_A \); \( V_A = -A_Ha/12h \); \( V_R \approx 2\pi\varepsilon a\psi_0^2e^{-\kappa h} \) Curve features primary minimum (coagulation), barrier (stability), secondary minimum (reversible flocculation) Salt compresses double layer, lowers barrier; van der Waals unchanged Schulze–Hardy counterion coagulates; ccc ∝ z⁻⁶ → 1 : 1/64 : 1/729 Negative sol Al³⁺ > Ba²⁺ > Na⁺ Positive sol [Fe(CN)₆]⁴⁻ > PO₄³⁻ > SO₄²⁻ > Cl⁻ Flocculation value lower value = stronger coagulant Other coagulation mutual (opposite sols), electrophoresis, prolonged dialysis, heating Fast coagulation \( k_f = 4k_BT/3\eta \) (6.2 × 10⁻¹⁸ m³ s⁻¹ in water at 298 K); \( t_{1/2} = 1/k_fn_0 \); second order Gold number mg protective colloid preventing red → blue of 10 mL gold sol with 1 mL 10% NaCl; smaller = better (gelatin best, starch poor) Polymers steric (good solvent) stabilises; bridging, depletion, poor solvent destabilise Emulsions Bancroft rule ; O/W conducts, dilutes with water; low HLB → W/O, high HLB → O/WBreakdown creaming, flocculation, coalescence, Ostwald ripening Gels thixotropy, syneresis, imbibition
Adsorption Fact Detail Sign ΔS < 0, ΔG < 0 → ΔH < 0 Physisorption about 20 kJ mol⁻¹; van der Waals; multilayer; non-specific; low T; follows ease of liquefaction Chemisorption about 100–400 kJ mol⁻¹; bonds; monolayer; specific; often activated Residence time \( \tau = \tau_0e^{E_d/RT} \), \( \tau_0 \sim 10^{-13} \) s Langmuir \( \theta = KP/(1+KP) \); low P first order, high P zero order; half coverage at P = 1/K Linear form \( P/V = 1/KV_m + P/V_m \) Dissociative \( \theta = (KP)^{1/2}/[1+(KP)^{1/2}] \) → \( \propto P^{1/2} \) at low P Competitive \( \theta_A = K_AP_A/(1+K_AP_A+K_BP_B) \) Isosteric \( \ln(P_2/P_1) = (\Delta H_{\text{ads}}/R)(1/T_2-1/T_1) \) at constant θ Freundlich \( x/m = kP^{1/n} \), n > 1; heat falls logarithmically Temkin \( \theta = c_1\ln(c_2P) \); heat falls linearly BET \( x/[V(1-x)] = 1/V_mc + (c-1)x/V_mc \); 0.05–0.30; \( V_m = 1/(s+i) \), \( c = 1+s/i \) Surface area \( S = V_mN_A\sigma/22414 \); N₂ σ = 0.162 nm² → 4.35 m² per cm³ STP Isotherm types I micropores; II non-porous; III weak; IV mesopores + hysteresis; V weak + meso; VI steps Pores micro < 2 nm; meso 2–50 nm; macro > 50 nm Laplace \( \Delta P = 2\gamma/r \) (bubble with two surfaces \( 4\gamma/r \)) Capillary rise \( h = 2\gamma\cos\theta/\rho gr \) Young \( \gamma_{SV} = \gamma_{SL} + \gamma_{LV}\cos\theta \) Kelvin \( \ln(P/P_0) = 2\gamma V_m/rRT \); capillary condensation below P₀ in pores Gibbs \( \Gamma = -(1/RT)\,d\gamma/d\ln c \); \( 1/2RT \) for 1:1 ionic surfactant without salt Area per molecule \( 1/(N_A\Gamma) \) Collision flux \( Z_W = P/\sqrt{2\pi mk_BT} \)
Heterogeneous Catalysis Fact Detail Catalyst lowers barrier; never changes K or ΔG° TOF molecules per site per second; one H₂ titrates two surface atoms Dispersion surface metal / total metal Unimolecular \( r = kK_AP_A/(1+K_AP_A) \); order \( 1-\theta_A \) Inhibited \( r = kK_AP_A/K_BP_B \) (B dominates surface) Langmuir–Hinshelwood \( r = kK_AK_BP_AP_B/(1+K_AP_A+K_BP_B)^2 \); max at \( K_AP_A = 1+K_BP_B \) (\( \theta_A = 1/2 \)) Eley–Rideal \( r = kK_AP_AP_B/(1+K_AP_A) \); saturates, no maximum Apparent E strong ads: E; weak ads: E − q_A; with inhibitor: E − q_A + q_B Sabatier intermediate binding best; volcano plot (formic acid decomposition classic) Promoters K₂O electronic, Al₂O₃ structural (Haber Fe)Poisons S, As, Pb, CO; Lindlar = deliberate selective poisoning Deactivation poisoning, coking, sintering, leaching Thiele \( \eta = \tanh\phi/\phi \); large φ: η ≈ 1/φ, \( E_{\text{app}} \approx E/2 \) Mass-transfer tests pellet size → pore diffusion; flow rate → film diffusion Zeolites Al for Si → Brønsted H⁺ sites; ZSM-5 para-xylene; zeolite Y in FCC Catalysts Fe (NH₃); Pt–Rh (NH₃ → NO); V₂O₅ (SO₂ → SO₃); Cu/ZnO/Al₂O₃ (CH₃OH); Fe/Co (Fischer–Tropsch); Ni (reforming, oil hydrogenation); Ag (ethylene oxide); CoMo/NiMo sulfides (HDS); Pt/Pd/Rh (exhaust); TiCl₄/MgCl₂ + AlEt₃ (Ziegler–Natta) NH₃ synthesis rate-determining step: dissociative N₂ chemisorption Mars–van Krevelen lattice oxygen oxidises substrate; O₂ reoxidises oxide
Last-Minute Traps Where Next Advertisement Advertisement