Skip to content

Protecting Groups

CSIR NET organic synthesis: protecting groups for alcohols, diols, carbonyls, acids and amines; Boc, Cbz, Fmoc and silyl ethers; orthogonality.

  • 16 min read
  • Updated
On this page · 18 sections
  1. Prerequisites
  2. The Hook: Reduce One Carbonyl, Keep the Other
  3. What Makes a Good Protecting Group
  4. Alcohols
  5. 1,2- and 1,3-Diols
  6. Aldehydes and Ketones
  7. Carboxylic Acids
  8. Amines
  9. Other Groups
  10. Orthogonal Protection
  11. Worked Examples
  12. Memory Tricks
  13. Don’t Confuse
  14. Common Mistakes
  15. Practice
  16. Quick Revision Table
  17. Key Takeaways
  18. What’s Next

Prerequisites

The Hook: Reduce One Carbonyl, Keep the Other

What Makes a Good Protecting Group

Protecting group
A protecting group is a temporary derivative of a functional group that makes it inert to a set of reaction conditions it would otherwise not survive, and that can later be removed to regenerate the original group.

An ideal protecting group:

  1. goes on easily and in high yield, ideally selectively when similar groups are present;
  2. is stable to every condition used while it is in place;
  3. comes off in high yield, under conditions that leave the rest of the molecule intact;
  4. does not add a new stereocentre (THP fails this) and adds little extra functionality;
  5. is cheap and gives easily separated by-products.

Every protecting group costs two steps (on and off) and lowers atom economy. Use one only when a change in the order of events or a more chemoselective reagent cannot do the job.

Alcohols

GroupInstalled withRemoved byStable toNotes
TMS ether (–OSiMe₃)TMSCl, Et₃N or imidazolevery mild acid, K₂CO₃/MeOH, fluoridelittletoo labile for most multistep work; useful transiently
TBS (TBDMS) etherTBSCl, imidazole, DMF; TBSOTf, 2,6-lutidine for hindered OHTBAF (F⁻), HF·pyridine; acid (AcOH/H₂O, CSA/MeOH)base, organometallics, hydrides, most oxidantsprimary OH reacts faster than secondary: selective protection
TIPS, TBDPS ethersTIPSCl or TBDPSCl, imidazoleF⁻; harder with acidmore robust than TBSbulkier; more selective for primary OH
Benzyl (Bn) etherNaH, BnBrH₂, Pd/C (hydrogenolysis → toluene); Na/NH₃(l)acid, base, F⁻, most oxidants and reductantsremoved under neutral conditions
PMB (p-methoxybenzyl) etherNaH, PMBClDDQ (oxidative) or CAN; stronger acid; H₂/PdbaseDDQ removes PMB in the presence of Bn
MOM ether (–OCH₂OCH₃)MOMCl, i-Pr₂NEtacid (HCl/MeOH, TFA)base, nucleophiles, hydridesan acetal; MOMCl is a carcinogen
THP ether3,4-dihydro-2H-pyran, PPTS or TsOHaqueous or alcoholic acid (PPTS/EtOH, AcOH/H₂O)base, organometallics, hydridescreates a new stereocentre: diastereomers with a chiral alcohol
Trityl (Tr) etherTrCl, pyridinemild acid (via the stable trityl cation)basevery bulky: protects primary OH selectively
Acetate (Ac), benzoate (Bz), pivaloate (Piv) estersAc₂O or BzCl or PivCl, pyridine (DMAP)base (K₂CO₃/MeOH, NaOMe/MeOH, LiOH); LiAlH₄acid, oxidantsnot stable to RMgX, RLi or LiAlH₄; Piv the most hindered and robust
Methyl etherMeI, NaH; (aryl) Me₂SO₄, K₂CO₃BBr₃ (especially aryl methyl ethers), TMSIalmost everythinghard to remove; mainly for phenols

Silyl ethers: relative stability

ConditionOrder of increasing stability
AcidTMS < TES < TBS < TIPS < TBDPS
BaseTMS < TES < TBS ≈ TBDPS < TIPS

Stability grows with steric bulk around silicon. Fluoride cleaves all of them because silicon has a high affinity for fluorine: F⁻ attacks Si to give a pentacoordinate silicate, and the very strong Si–F bond drives the reaction.

1,2- and 1,3-Diols

GroupInstalled withRing formedRemoved by
Acetonide (isopropylidene acetal)acetone or 2,2-dimethoxypropane, TsOH or CSAfive-membered (1,3-dioxolane) from cis-1,2-diols; six-membered (1,3-dioxane) from 1,3-diolsaqueous acid
Benzylidene acetalPhCHO or PhCH(OMe)₂, acidprefers six-membered 1,3-dioxanes (glucose 4,6-O-benzylidene)aqueous acid; hydrogenolysis; regioselective reductive opening to a benzyl ether
Cyclic silylene (di-tert-butylsilylene)t-Bu₂Si(OTf)₂1,3-diolsF⁻

Acetonides form easily from cis-1,2-diols on five-membered rings and on furanoses, and less easily from trans-1,2-diols on six-membered rings, where the fused ring would be strained. Diacetone glucose (1,2:5,6-di-O-isopropylidene-α-D-glucofuranose) is the textbook example: acetone and acid lock glucose in the furanose form because two cis-diol pairs become available there.

Aldehydes and Ketones

GroupInstalled withStable toRemoved by
1,3-Dioxolane (ethylene acetal or ketal)HOCH₂CH₂OH, TsOH, toluene, Dean–Stark (removal of water)base, RMgX, RLi, LiAlH₄, NaBH₄, most oxidantsaqueous acid (H₃O⁺); PPTS in wet acetone (transacetalisation)
Dimethyl acetalMeOH, HC(OMe)₃, acidas aboveaqueous acid (faster than the cyclic acetal)
1,3-Dithiolane / 1,3-dithianeHSCH₂CH₂SH or HS(CH₂)₃SH, BF₃·OEt₂acid and baseHgCl₂/H₂O, NBS, MeI/H₂O; Raney Ni removes the carbonyl completely (→ CH₂)

Chemoselectivity: aldehydes form acetals faster than ketones, and conjugated or hindered ketones react slowest. An aldehyde can therefore be protected in the presence of a ketone. In the reverse problem (react the aldehyde, keep the ketone) no protection may be needed: NaBH₄ at low temperature reduces the aldehyde preferentially. (Luche conditions, NaBH₄ with CeCl₃ in methanol, reverse the preference and reduce a ketone in the presence of an aldehyde, because the aldehyde is tied up as its hydrate or acetal.)

Carboxylic Acids

EsterInstalled withRemoved byStable to
Methyl / ethylMeOH or EtOH, H⁺ (Fischer); MeI, K₂CO₃; CH₂N₂ or TMSCHN₂ (methyl)LiOH or NaOH (saponification); acid hydrolysisacid (moderately), hydrogenolysis
tert-Butylisobutylene, H₂SO₄; Boc₂O, DMAPTFA (via t-Bu⁺ → isobutylene)base, nucleophiles (hindered), hydrogenolysis
BenzylBnBr, base; BnOH, acidH₂, Pd/Cmild acid and base
Allylallyl bromide, basePd(0) + allyl scavenger (morpholine, dimedone)acid, base
Silyl (TMS, TBS) esterssilyl chloride, basewater, mild acidvery little

Esters do not protect a carboxylic acid against strong nucleophiles (RMgX, LiAlH₄). For those, the acid is converted to an orthoester or oxazoline, or the carboxyl is introduced later.

Amines

GroupStructureInstalled withRemoved byStable to
Boc (tert-butoxycarbonyl)R₂N–CO–OtBuBoc₂O, Et₃N or NaOHTFA, HCl in dioxanebase, nucleophiles, H₂/Pd
Cbz (Z, benzyloxycarbonyl)R₂N–CO–OCH₂PhCbzCl, aqueous Na₂CO₃H₂, Pd/C; HBr/AcOHmild acid, base
Fmoc (9-fluorenylmethoxycarbonyl)R₂N–CO–OCH₂(9-fluorenyl)Fmoc-Cl or Fmoc-OSu, NaHCO₃piperidine (about 20% in DMF)acid (TFA), H₂/Pd (fairly)
Alloc (allyloxycarbonyl)R₂N–CO–OCH₂CH=CH₂Alloc-Cl, basePd(PPh₃)₄ + nucleophilic scavengeracid, base
Tosyl (Ts) sulfonamideR₂N–SO₂C₆H₄CH₃TsCl, pyridineNa/NH₃(l), Na naphthalenide; strong acid with heatalmost everything
Nosyl (Ns) sulfonamideR₂N–SO₂C₆H₄NO₂NsCl, basethiolate (PhSH, K₂CO₃) via SNAracid, base
Phthalimidefor primary aminespotassium phthalimide + RX (Gabriel)hydrazine (N₂H₄)acid, mild base
Acetamide / benzamideR₂N–CORAc₂O or BzClstrong acid or base, heatmost conditions
TrifluoroacetamideR₂N–COCF₃(CF₃CO)₂Omild base (K₂CO₃/MeOH)acid

The three carbamate mechanisms

graph TD
    subgraph Boc
    B1["R-NH-CO-OtBu"] -->|"TFA: protonate C=O,
lose t-Bu cation"| B2["R-NH-COOH
(carbamic acid)"] B2 -->|"- CO2"| B3["R-NH3+"] end subgraph Cbz C1["R-NH-CO-OCH2Ph"] -->|"H2, Pd/C:
hydrogenolysis of
benzylic C-O"| C2["R-NH-COOH + PhCH3"] C2 -->|"- CO2"| C3["R-NH2"] end subgraph Fmoc F1["R-NH-CO-OCH2-Fl"] -->|"piperidine removes
fluorenyl C9-H (E1cB)"| F2["dibenzofulvene +
R-NH-COO-"] F2 -->|"- CO2"| F3["R-NH2"] end
  • Boc: the t-Bu cation is captured by scavengers (anisole, thioanisole, triethylsilane, water) so that it does not alkylate electron-rich side chains (Trp, Met, Tyr) during deprotection.
  • Fmoc: the C9–H of fluorene is unusually acidic because the resulting anion contains an aromatic cyclopentadienide ring. Elimination gives dibenzofulvene, which piperidine also traps.
  • Cbz: cleaved under neutral hydrogenolysis; HBr in acetic acid is the acidic alternative.

Other Groups

FunctionGroupOnOff
Terminal alkyne C–HTMS or TIPSn-BuLi or EtMgBr, then R₃SiClK₂CO₃/MeOH (TMS); TBAF
Thioltrityl (S-Tr)TrClTFA with Et₃SiH
AlkenedibromideBr₂Zn (regenerates the alkene with the original geometry, since both steps are anti)
Phenolmethyl, benzyl, TBS etheras for alcoholsBBr₃; H₂/Pd; F⁻

Orthogonal Protection

Orthogonal set
Two protecting groups are orthogonal when each can be removed, in any order, by conditions that leave the other completely intact. A set of mutually orthogonal groups lets a chemist unmask one functional group at a time in a molecule with many.
Removal conditionGroups removed
Acid (TFA, aqueous acid)Boc, t-Bu ester and ether, Tr, THP, MOM, acetals, (TBS, slowly)
Base (piperidine; K₂CO₃/MeOH; LiOH)Fmoc; acetate, benzoate; methyl esters; trifluoroacetamide
Hydrogenolysis (H₂, Pd/C)Bn ether and ester, Cbz (also reduces alkenes and alkynes)
Fluoride (TBAF, HF·py)silyl ethers, silyl-protected alkynes
Oxidation (DDQ, CAN)PMB
Pd(0)Alloc, allyl ester and ether
Hg(II) or NBSthioacetals
Hydrazinephthalimide (also cleaves acetate esters)

Two classic combinations in solid-phase peptide synthesis:

StrategyTemporary α-amino group (removed every cycle)Permanent side-chain groups and resin link (removed at the end)
Fmoc/tBuFmoc, by piperidinet-Bu ethers and esters, Boc, Tr; cleaved with TFA
Boc/Bn (Merrifield)Boc, by TFAbenzyl-based groups; cleaved with HF

Fmoc/tBu is truly orthogonal (base versus acid). Boc/Bn relies on a difference in acid strength (TFA versus HF), so it is “quasi-orthogonal”.

Pairs that are not orthogonal: Bn and Cbz (both hydrogenolysis); Boc and t-Bu ester (both TFA); TBS and THP under acid (but fluoride removes TBS alone); acetate and methyl ester (both base).

Worked Examples

Memory Tricks

Don’t Confuse

ThisIs not this
Boc: acid-labile, base-stableFmoc: base-labile, acid-stable
Cbz: hydrogenolysisBn ether: also hydrogenolysis (not orthogonal to Cbz)
O,O-acetal: removed by aqueous acidS,S-acetal: stable to acid; Hg²⁺ or NBS
Bn ether: H₂/Pd or Na/NH₃PMB ether: DDQ, CAN (and H₂/Pd)
TBS: F⁻ or acidTBDPS: more acid-stable; TIPS: more base-stable
Acetate ester: base-labile; fails with RMgXSilyl ether: survives RMgX, LiAlH₄
THP: new stereocentre (diastereomers)MOM: no new stereocentre
Orthogonal: removable independently in any orderQuasi-orthogonal: same class of condition, different strength (Boc/Bn)

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not taken from any CSIR NET paper.

Level 1: Foundation

  1. Which reagent removes an Fmoc group?
  2. Which protecting group for a ketone is stable to aqueous acid?
  3. Why does TBSCl with imidazole protect a primary alcohol in the presence of a secondary one?
Answers
  1. Piperidine (about 20% in DMF), by E1cB elimination.
  2. A thioacetal (1,3-dithiolane or 1,3-dithiane).
  3. The bulky tert-butyldimethylsilyl group reacts faster with the less hindered primary OH.

Level 2: Part B Style

Practice Q1. An amine protected as a Boc carbamate and an alcohol protected as a benzyl ether are present in the same molecule. Which reagent removes only the Boc group?

(a) H₂, Pd/C (b) trifluoroacetic acid (c) piperidine (d) TBAF

Answer: (b)

TFA cleaves Boc via the tert-butyl cation; benzyl ethers survive TFA. H₂/Pd-C removes the benzyl ether (and not Boc). Piperidine removes Fmoc, and TBAF removes silyl groups; neither touches Boc.

Practice Q2. The best sequence to convert ethyl 4-oxopentanoate into 5-hydroxypentan-2-one is

(a) NaBH₄, EtOH (b) LiAlH₄, then H₃O⁺ (c) ethylene glycol, TsOH; then LiAlH₄; then H₃O⁺ (d) ethanedithiol, BF₃·OEt₂; then LiAlH₄; then H₃O⁺

Answer: (c)

The dioxolane masks the ketone during LiAlH₄ reduction of the ester and is removed by aqueous acid. (a) reduces the ketone, not the ester. (b) reduces both. (d) protects correctly, but aqueous acid does not remove a thioacetal, so the ketone is not regenerated.

Practice Q3. Which pair of protecting groups is orthogonal?

(a) Bn ether and Cbz (b) Boc and tert-butyl ester (c) Fmoc and Boc (d) acetate ester and methyl ester

Answer: (c)

Fmoc is removed by base (stable to TFA) and Boc by acid (stable to piperidine). The other pairs are cleaved by the same condition: hydrogenolysis (a), TFA (b), base (d).

Practice Q4. A PMB ether and a benzyl ether are both present. The reagent that removes the PMB group selectively is

(a) H₂, Pd/C (b) DDQ in CH₂Cl₂–H₂O (c) Na in liquid NH₃ (d) K₂CO₃ in MeOH

Answer: (b)

The electron-rich p-methoxybenzyl group is oxidised by DDQ to an oxocarbenium ion, which water hydrolyses to p-anisaldehyde and the free alcohol. Hydrogenolysis and Birch conditions remove both benzyl-type ethers; K₂CO₃/MeOH removes neither.

Level 3: Part C Style

Practice Q5. A lysine derivative carries an Fmoc group on the α-NH₂, a Boc group on the side-chain ε-NH₂, and a tert-butyl ester on the carboxyl group.

Which statements are correct?

  1. 20% piperidine in DMF frees only the α-amino group.
  2. TFA removes both the Boc group and the tert-butyl ester.
  3. The α-amino and ε-amino groups can be unmasked independently, in either order.
  4. H₂ over Pd/C removes the Fmoc group selectively.

(a) 1, 2 and 3 only (b) 1 and 2 only (c) 2 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  1. Correct. Fmoc is base-labile; Boc and t-Bu ester are base-stable.
  2. Correct. Both cleave through the tert-butyl cation.
  3. Correct. Fmoc (base) and Boc (acid) are orthogonal: piperidine first frees α-NH₂, or TFA first frees ε-NH₂ (and the acid).
  4. Wrong. Hydrogenolysis is the method for Cbz and benzyl groups. Fmoc is designed to be removed by base.

Practice Q6. Butane-1,3-diol is treated in sequence with (i) TBSCl (1.0 equiv), imidazole, DMF, 0 °C; (ii) PCC; (iii) MeMgBr, then aqueous NH₄Cl; (iv) TBAF in THF.

Which statements are correct?

  1. Step (i) silylates mainly the primary hydroxyl group.
  2. The product of step (ii) is a ketone.
  3. The final product is 3-methylbutane-1,3-diol.
  4. Protecting the primary OH as an acetate in step (i) would give the same final product after step (iv) is replaced by K₂CO₃/MeOH.

(a) 1, 2 and 3 only (b) 1 and 3 only (c) 2 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  1. Correct. Steric selectivity for the primary OH.
  2. Correct. The free secondary OH is oxidised to a methyl ketone, TBSOCH₂CH₂COCH₃.
  3. Correct. MeMgBr gives the tertiary alcohol; TBAF releases the primary OH: HOCH₂CH₂C(OH)(CH₃)₂.
  4. Wrong. MeMgBr would also attack the acetate (consuming reagent, cleaving the ester and generating tertiary alcohol by-products), so the acetate is not a suitable protecting group here.

Practice Q7. Which statements about carbonyl protection are correct?

  1. Treating a compound containing both an aldehyde and a ketone with 1 equivalent of ethylene glycol and an acid catalyst protects the aldehyde preferentially.
  2. A 1,3-dioxolane is stable to LiAlH₄, Grignard reagents and aqueous NaOH.
  3. A 1,3-dithiane is cleaved by dilute aqueous HCl at room temperature.
  4. Removing water during acetal formation shifts the equilibrium towards the acetal.

(a) 1, 2 and 4 only (b) 1 and 2 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 4 only
  1. Correct. Aldehydes are more electrophilic and less hindered than ketones.
  2. Correct. Without acid there is no route to the oxocarbenium ion.
  3. Wrong. Thioacetals are stable to dilute acid; Hg(II), NBS or MeI/H₂O are used.
  4. Correct. Acetal formation releases water; Le Chatelier’s principle (Dean–Stark trap or orthoformate) drives it forward.

Quick Revision Table

FunctionGroup: on / off
AlcoholTBS: TBSCl, imidazole / TBAF or acid; Bn: NaH, BnBr / H₂, Pd/C; PMB: / DDQ; MOM, THP: / acid; Tr: primary OH / mild acid; Ac: Ac₂O, py / K₂CO₃, MeOH
Silyl stabilityacid TMS < TES < TBS < TIPS < TBDPS; base TMS < TES < TBS ≈ TBDPS < TIPS
Diolsacetonide (cis-1,2; 1,3); benzylidene (1,3; glucose 4,6)
Carbonyldioxolane: glycol, TsOH, −H₂O / H₃O⁺; dithiane: dithiol, BF₃ / HgCl₂; aldehyde > ketone
AcidMe ester / LiOH; t-Bu ester / TFA; Bn ester / H₂, Pd; allyl / Pd(0)
AmineBoc / TFA; Cbz / H₂, Pd; Fmoc / piperidine; Alloc / Pd(0); phthalimide / N₂H₄; Ts / Na, NH₃
AlkyneTMS / K₂CO₃, MeOH or TBAF
OrthogonalFmoc/tBu (true); Boc/Bn (quasi)
Not orthogonalBn + Cbz; Boc + t-Bu ester; Ac + Me ester

Key Takeaways

What’s Next

Advertisement
Advertisement