Skip to content

Concepts in Organic Synthesis Formula Sheet and Short Notes

One-page CSIR NET revision of organic synthesis: disconnections, synthons and dⁿ/aⁿ notation, umpolung reagents, yield arithmetic and protecting groups.

  • 6 min read
  • Updated
On this page · 7 sections
  1. Vocabulary
  2. Disconnection rules
  3. Synthons
  4. Umpolung
  5. Linear and convergent synthesis
  6. Protecting groups
  7. Where next

Every rule, table and number from Retrosynthesis and the Disconnection Approach, Synthons and Synthetic Equivalents, Umpolung and Acyl Anion Equivalents, Linear and Convergent Synthesis and Protecting Groups, on one page.

Vocabulary

TermMeaning
TM, ⇒target molecule; “can be made from” (planning only)
Disconnectionimaginary bond cleavage, reverse of a real reaction
Transform / retronreverse reaction / structural feature that triggers it
Synthon / synthetic equivalentidealised fragment / real reagent
FGI / FGAchange a group (same skeleton) / add a group on paper
Reconnectionjoin two atoms on paper because the forward step cleaves (ozonolysis)
Strategic bondthe cut that simplifies the target most

Disconnection rules

  1. Every cut must match a reliable forward reaction.
  2. C–X before C–C: esters, amides, ethers, sulfides first.
  3. Prefer two-group disconnections; cut at branch points and near the middle; use symmetry.
  4. Check the forward direction: chemoselectivity, regiochemistry, stereochemistry, protection.
TargetDisconnection
Etheralkoxide + primary/methyl halide (Williamson); never SN2 at tertiary or aryl C
AmineFGI: amide (LiAlH₄), imine (reductive amination), nitrile, azide, nitro; never direct alkylation
1,1-diXcarbonyl + 2 HX (acetal)
1,2-diXepoxide + nucleophile
1,3-diXenone + heteroatom nucleophile; Mannich
AlcoholRMgX + HCHO (1°), RCHO (2°), ketone or ester (3°), ethylene oxide (+2 C)
AcidRMgX + CO₂; RBr + CN⁻ then hydrolysis
β-Hydroxy carbonylaldol; cut C(α)–C(OH)
α,β-Unsaturated carbonylaldol condensation, Knoevenagel
1,3-DicarbonylClaisen; Dieckmann (1,6-diester → 5-ring, 1,7 → 6-ring)
1,5-DicarbonylMichael
Cyclohexenone (fused)Robinson (Michael + intramolecular aldol)
CyclohexeneDiels–Alder (suprafacial; dienophile geometry kept)
1,2 / 1,4 / 1,6-diOumpolung / a² electrophile or Stetter / reconnection (cyclohexene + O₃)
  • Aromatic order of events: NO₂ meta-director, halogen o,p; 3-bromoaniline = nitrate, brominate, reduce; temporary NH₂ for 1,3,5-tribromobenzene; acylate then reduce for n-alkyl.

Synthons

SynthonExampleEquivalentsPolarity
d⁰RO⁻, R₂N⁻, RS⁻ROH, R₂NH, RSH + basenatural
a¹R₂C⁺OH, RCO⁺carbonyls, RCOCl, esters, Weinreb amides, CO₂natural
d²⁻CH₂CORLDA enolate, enamine, silyl enol ether, acetoacetate, malonatenatural
a³⁺CH₂CH₂CORenones, acrylates, acrylonitrile, Mannich basesnatural
d¹RCO⁻dithiane anion, CN⁻, NHC, nitronate, CH₂=C(OMe)Liumpolung
a²⁺CH₂CORα-halo carbonyls, epoxides, nitroalkenesunnatural
d³⁻CH₂CH₂CORacetal-protected 3-halo aldehyde Grignard, siloxycyclopropanesumpolung
  • Alternation: odd positions accept, even positions donate (from the heteroatom = 0).
  • Sum rule: dᵐ + aⁿ → 1,(m + n). Odd = natural pair; even = one unnatural synthon needed.
  • R⁻ choice: RLi, RMgX → 1,2 (a¹); R₂CuLi → 1,4 (a³).
  • ⁻CO₂H = CN⁻; ⁺CO₂H = CO₂.

Umpolung

MethodKey facts
1,3-Dithiane (Corey–Seebach)RCHO + HS(CH₂)₃SH, BF₃; n-BuLi; + RX, epoxide, C=O; HgCl₂/H₂O (or NBS, MeI/H₂O) → ketone; Raney Ni → CH₂; stable to acid
Cyanidebenzoin (ArCHO, catalytic CN⁻, 1,2); O-protected cyanohydrin anions; Strecker
Thiazolium / NHCBreslow intermediate; benzoin (1,2), Stetter (1,4), homoenolate with enals; thiamine in pyruvate decarboxylase
NitronateHenry (β-nitro alcohol), Michael; Nef (strong aqueous acid; N₂O) → C=O; nitromethane pKa ≈ 10
Other d¹CH₂=C(OMe)Li; alkyne + Hg²⁺ hydration
a²α-halo ketone + stabilised enolate → 1,4-diketone; epoxide + malonate → γ-lactone
d³Grignard of 2-(2-bromoethyl)-1,3-dioxolane
Radicalpinacol (Mg, Ti, SmI₂) → 1,2-diol; acyloin (Na, esters) → α-hydroxy ketone, rings of any size; McMurry (low-valent Ti) → alkene

Linear and convergent synthesis

  • Overall yield \( Y = \prod y_i \) along a path; \( Y = y^n \) for equal steps.
  • LLS = longest linear sequence (sets yield and time); total steps sets labour.
  • n fragments need n − 1 couplings either way; fully convergent LLS = log₂ n couplings for n = 2ᵏ.
yn = 5n = 10n = 20
95%77.4%59.9%35.8%
90%59.0%34.9%12.2%
80%32.8%10.7%1.2%
  • 8 fragments at 90%: linear 0.9⁷ = 47.8%; convergent 0.9³ = 72.9%.
  • Moles of starting material = moles of target ÷ Y. Example: 10.0 g of M 300 from M 150, 6 × 80% → 19.1 g.
  • Oligonucleotide 20-mer: 99% coupling → 82.6%; 98% → 68.1%.
  • Atom economy = M(product)/ΣM(reactants) × 100: Diels–Alder 100%; EtBr + NaOH → EtOH 30.9%; Wittig methylenation of cyclohexanone 25.7%.
  • Divergent = one intermediate → many targets. Step, redox and protecting-group economy; cascades (Robinson).
  • Peptides: SPPS linear; fragment condensation convergent (C-terminal racemisation via oxazolone; Gly/Pro ends safe).

Protecting groups

FunctionGroupOff
AlcoholTMS, TBS, TIPS, TBDPSF⁻ (TBAF); acid (TMS fastest)
BnH₂, Pd/C; Na/NH₃
PMBDDQ, CAN
MOM, THP (new stereocentre), Tr (primary OH)acid
Ac, Bz, Pivbase (K₂CO₃/MeOH); not stable to RMgX
Me (phenols)BBr₃
Diolacetonide; benzylideneacid
Carbonyldioxolane (glycol, TsOH, Dean–Stark)H₃O⁺; stable to base, RMgX, LiAlH₄
dithiane / dithiolaneHgCl₂, NBS; stable to acid
AcidMe/Et ester; t-Bu; Bn; allylLiOH; TFA; H₂/Pd; Pd(0)
AmineBoc; Cbz; Fmoc; AllocTFA; H₂/Pd or HBr/AcOH; piperidine; Pd(0)
Ts; Ns; phthalimide; COCF₃Na/NH₃; thiolate; N₂H₄; K₂CO₃/MeOH
Alkyne C–HTMSK₂CO₃/MeOH; TBAF
  • Silyl stability, acid: TMS < TES < TBS < TIPS < TBDPS; base: TMS < TES < TBS ≈ TBDPS < TIPS.
  • Aldehydes form acetals faster than ketones.
  • Orthogonal: Fmoc (base) / Boc (acid) / Cbz (H₂) / Alloc (Pd). SPPS: Fmoc/tBu (TFA at end); Boc/Bn (HF at end, quasi-orthogonal).
  • Not orthogonal: Bn + Cbz; Boc + t-Bu ester; Ac + Me ester.

Where next

Advertisement
Advertisement