Skip to content

Synthons and Synthetic Equivalents

CSIR NET organic synthesis: synthons, dⁿ/aⁿ notation, natural vs unnatural polarity, the sum rule and choosing real reagents for each synthon.

  • 15 min read
  • Updated
On this page · 14 sections
  1. Prerequisites
  2. The Hook: Nobody Sells CH₃⁻
  3. Definitions
  4. The dⁿ / aⁿ Notation
  5. The Sum Rule: Predicting the Relationship
  6. A Catalogue of Synthons and Equivalents
  7. Worked Examples
  8. Memory Tricks
  9. Don’t Confuse
  10. Common Mistakes
  11. Practice
  12. Quick Revision Table
  13. Key Takeaways
  14. What’s Next

Prerequisites

The Hook: Nobody Sells CH₃⁻

Definitions

Synthon and synthetic equivalent
  • Synthon (Corey’s term): a structural unit within a molecule that can be formed or assembled by a known synthetic operation. In practice: the idealised fragment, usually a carbocation or carbanion, obtained by a disconnection.
  • Synthetic equivalent: the real reagent that delivers the synthon’s reactivity. One synthon usually has several equivalents, which differ in reactivity, basicity and selectivity.
  • Ionic disconnection: a heterolytic cut, giving one donor (nucleophilic, anionic) and one acceptor (electrophilic, cationic) synthon. Most disconnections are ionic.
  • Radical disconnection: a homolytic cut, giving two radical synthons (pinacol and acyloin couplings, radical cyclisations, Kolbe electrolysis).

A disconnection gives two possible synthon pairs, because either fragment can take the negative charge. Only one pair is usually sensible:

Disconnection of PhCH(OH)–CH₃SynthonsReal reagentsVerdict
Option 1PhCH(OH)⁺ + CH₃⁻PhCHO + CH₃MgIgood: the carbonyl carbon is naturally electrophilic
Option 2PhCH(OH)⁻ + CH₃⁺an α-hydroxybenzyl anion + CH₃Ipoor: needs a nucleophilic carbinol carbon (umpolung)

Choosing the pair in which each synthon has its natural polarity is the first rule of synthon selection.

The dⁿ / aⁿ Notation

The donor/acceptor notation (introduced by D. Seebach in the context of umpolung) labels each synthon by type and position:

  • d = donor (nucleophilic carbon or heteroatom), a = acceptor (electrophilic carbon).
  • The superscript n is the position of the reactive atom relative to the heteroatom-bearing functional group: the heteroatom is 0, the carbon carrying it is 1, the next carbon 2, and so on.
  • Synthons with no functional group (simple alkyl groups R⁺, R⁻) are often called alkyl synthons and carry no number.
SynthonExampleTypical equivalentPolarity
d⁰RO⁻, RS⁻, R₂N⁻ (heteroatom donors)alcohols, thiols, amines (with base)natural
a¹R₂C⁺–OH, RC⁺=Oaldehydes, ketones, esters, acid chloridesnatural
d²⁻CH₂–CORenolates, enamines, silyl enol ethers, β-dicarbonyl anionsnatural
a³⁺CH₂–CH₂–CORα,β-unsaturated carbonyls, nitriles, nitro compounds (Michael acceptors)natural
d¹RC⁻=O (acyl anion), R₂C⁻–OH1,3-dithiane anions, cyanide, nitronates, NHC/Breslow intermediatesunnatural (umpolung)
a²⁺CH₂–COR, ⁺CH₂–CH₂OHα-halo carbonyls; epoxidesunnatural
d³⁻CH₂–CH₂–COR (homoenolate)Grignard reagents of protected 3-halo carbonyls; siloxycyclopropane-derived metal homoenolatesunnatural (umpolung)
graph LR
    O["O (0)
d0"] --- C1["C1
a1 natural
d1 umpolung"] C1 --- C2["C2
d2 natural
a2 unnatural"] C2 --- C3["C3
a3 natural
d3 umpolung"] C3 --- C4["C4
d4 natural
(vinylogous)"]

The d⁴ and a⁵ positions are reached through conjugation: a dienolate reacts at its γ-carbon (vinylogous d⁴), and a dienone accepts nucleophiles at the δ-carbon (a⁵).

The Sum Rule: Predicting the Relationship

When a donor synthon with its reactive atom at position m bonds to an acceptor synthon with its reactive atom at position n, the two functional-group carbons in the product end up in a 1,(m + n) relationship.

Donor + acceptorm + nProduct relationshipForward reaction
d⁰ + a¹11,1 (acetal, imine)acetalisation, imine formation
d⁰ + a² (epoxide)21,2-diX (β-amino alcohol)epoxide opening
d⁰ + a³31,3-diX (β-amino ketone)aza- or oxa-Michael addition
d² + a¹31,3-diOaldol, Claisen
d² + a³51,5-diOMichael
d¹ + a¹21,2-diObenzoin, dithiane + aldehyde
d² + a²41,4-diOenolate + α-haloketone
d¹ + a³41,4-diOStetter; dithiane or nitronate conjugate addition
d³ + a¹41,4-diOhomoenolate + aldehyde
d³ + a³61,6-diOhomoenolate conjugate addition

The parity argument follows at once. Natural donors have even n (d⁰, d², d⁴) and natural acceptors odd n (a¹, a³), so natural + natural always gives an odd relationship (1,3, 1,5). An even relationship (1,2, 1,4, 1,6) needs exactly one unnatural synthon, or a radical or reconnection route.

A Catalogue of Synthons and Equivalents

Alkyl, aryl and vinyl synthons

SynthonEquivalentsNotes
R⁺ (primary, methyl)R–Br, R–I, R–OTs, R–OMs; Me₂SO₄, Me₃O⁺BF₄⁻SN2 electrophiles
R⁺ (tertiary)R–OH or alkene + acid; R–Cl + Lewis acidSN1; Friedel–Crafts; but no enolate alkylation (elimination)
R⁻RMgX, RLi (hard; 1,2-addition), R₂CuLi (soft; 1,4-addition, SN2 at halides), R₂Zn, R₃Alchoose by hardness and basicity
Ar⁺ArN₂⁺ (Sandmeyer and related), ArX with Pd(0) (cross-coupling), activated ArF for SNAran aryl cation itself is not used
Ar⁻ArMgBr, ArLi (also by directed ortho-lithiation), ArB(OH)₂ (Suzuki), ArSnR₃ (Stille)
HC≡C⁻NaC≡CH, HC≡CMgBr, lithium acetylideSN2 with primary halides; adds to C=O
=CH₂ (C=C formation)Ph₃P=CH₂ (Wittig); (EtO)₂P(O)CH⁻CO₂Et (HWE)olefination; see Olefination Named Reactions

Carbonyl-based synthons

SynthonTypeEquivalents
R₂C⁺–OHa¹R₂C=O
⁺CH₂OHa¹HCHO (paraformaldehyde)
RC⁺=O (acyl cation)a¹RCOCl, (RCO)₂O, RCO₂R′; Weinreb amide (stops at ketone with RMgX/RLi); RC≡N (ketone after hydrolysis)
⁺CO₂Ha¹CO₂ (with RMgX or RLi)
⁺CO₂Eta¹ClCO₂Et, (EtO)₂CO (acylating an enolate)
⁻CO₂Hd¹CN⁻ (SN2, then hydrolysis)
⁻CH₂CHO / ⁻CH₂CORd²lithium enolate (LDA, −78 °C, kinetic), enamine (Stork), silyl enol ether + Lewis acid (Mukaiyama), aza-enolates of imines and hydrazones
⁻CH₂COR (stabilised)d²β-keto ester anion (acetoacetic ester synthesis)
⁻CH₂CO₂Hd²diethyl malonate anion (malonic ester synthesis), ester enolate (LDA)
⁺CH₂CH₂CORa³R–CO–CH=CH₂ (MVK for R = CH₃), acrylates, acrylonitrile; Mannich bases (β-amino ketones that release the enone)
⁺CH₂CORa²BrCH₂COR, ClCH₂COR
⁺CH₂CH₂OHa²ethylene oxide (epoxides generally)

Why one synthon has several equivalents

The choice among equivalents is a choice of reactivity:

  • Hard versus soft carbanions. RLi and RMgX add 1,2 to enones (attack at the harder carbonyl carbon); R₂CuLi adds 1,4. So “CH₃⁻ + a³ synthon” means Me₂CuLi + enone, whereas “CH₃⁻ + a¹” means MeLi or MeMgI + ketone.
  • Basicity. A simple ketone enolate alkylated with a secondary halide competes with E2 and with polyalkylation. The acetoacetic ester or malonic ester anion is far less basic, alkylates cleanly once or twice, and the extra CO₂Et is removed by hydrolysis and decarboxylation.
  • Regiochemistry of enolates. For an unsymmetrical ketone (2-methylcyclohexanone), LDA at −78 °C gives the kinetic (less substituted) enolate; an alkoxide at higher temperature, or the silyl enol ether from equilibrating conditions, gives the thermodynamic (more substituted) one. Each is a different d² equivalent.
  • Neutral equivalents. Enamines (Stork) and silyl enol ethers (Mukaiyama aldol, with TiCl₄) avoid strong base entirely and give monoalkylation or crossed aldols cleanly.
  • Self-condensation. Crossed aldol between two enolisable partners gives four products. Pre-forming one enolate with LDA, or using a silyl enol ether with a Lewis acid, makes the d² and a¹ roles unambiguous.

Worked Examples

Memory Tricks

Don’t Confuse

ThisIs not this
Synthon (idealised fragment)Synthetic equivalent (the bottle on the shelf)
d² (enolate carbon, natural)d¹ (acyl anion, umpolung)
a³ (Michael acceptor β-carbon, natural)a² (α-halo carbonyl carbon, unnatural)
Me₂CuLi + enone: 1,4-additionMeLi or MeMgI + enone: mainly 1,2-addition
Kinetic enolate (LDA, −78 °C, less substituted)Thermodynamic enolate (equilibrating base, more substituted)
CN⁻ as ⁻CO₂H (adds one carbon via SN2)CO₂ as ⁺CO₂H (adds one carbon to an organometallic)
Ionic disconnection (one donor, one acceptor)Radical disconnection (two radicals; pinacol, acyloin)

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not taken from any CSIR NET paper.

Level 1: Foundation

  1. In the dⁿ/aⁿ notation, what is the synthon type of an enolate carbon?
  2. Give one synthetic equivalent of the synthon ⁻CO₂H.
  3. A d² synthon combines with an a³ synthon. What relationship results between the two carbonyl carbons?
Answers
  1. d² (natural donor at the α-carbon).
  2. Cyanide (NaCN or KCN in SN2, then hydrolysis of the nitrile). Note that CO₂ is the equivalent of the opposite synthon, ⁺CO₂H.
  3. 1,5 (2 + 3 = 5): the Michael reaction.

Level 2: Part B Style

Practice Q1. Which synthon has unnatural (umpolung) polarity?

(a) ⁻CH₂COCH₃ (b) CH₃C⁻=O (c) ⁺CH₂CH₂COCH₃ (d) CH₃C⁺=O

Answer: (b)

The acetyl anion is d¹: a nucleophilic carbonyl carbon, opposite to its natural (a¹) polarity. (a) is d², (c) is a³ and (d) is a¹, all natural.

Practice Q2. The best synthetic equivalent of the synthon ⁻CH₂CO₂H for making a substituted acetic acid R–CH₂CO₂H from R–Br is

(a) acetic acid with NaOH (b) diethyl malonate with NaOEt, followed by hydrolysis and decarboxylation (c) ethyl bromoacetate (d) chloroacetic acid with NaCN

Answer: (b)

The malonate anion is a stabilised, weakly basic d² equivalent; after alkylation, hydrolysis and heating remove one carboxyl as CO₂. (a) forms the carboxylate, not a carbanion. (c) is an a² electrophile (the opposite polarity). (d) gives cyanoacetic acid.

Practice Q3. Cyclohex-2-en-1-one is treated with reagent X and then aqueous NH₄Cl, giving 3-methylcyclohexanone as the major product. X is

(a) CH₃Li in ether (b) CH₃MgBr in ether (c) (CH₃)₂CuLi in ether (d) CH₃I with K₂CO₃

Answer: (c)

The cuprate is a soft CH₃⁻ equivalent and attacks the a³ (β) position. CH₃Li and CH₃MgBr (without copper) mainly attack the carbonyl carbon to give the tertiary allylic alcohol. (d) has no carbon nucleophile.

Practice Q4. A dithiane anion (d¹) adds to an epoxide, and the dithiane is then hydrolysed to a ketone. The relationship between the carbonyl carbon and the carbinol carbon in the product is

(a) 1,2 (b) 1,3 (c) 1,4 (d) 1,5

Answer: (b)

The epoxide is an a² equivalent for a 2-hydroxyethyl unit. Sum = 1 + 2 = 3: the product is a β-hydroxy ketone (RCOCH₂CH(OH)R′), the same relationship an aldol would give.

Level 3: Part C Style

Practice Q5. The pyrrolidine enamine of cyclohexanone is heated with acrylonitrile, and the product is hydrolysed with aqueous acid.

Which statements are correct?

  1. The enamine acts as a neutral d² equivalent of the cyclohexanone enolate.
  2. Acrylonitrile acts as an a³ synthon.
  3. The product, 3-(2-oxocyclohexyl)propanenitrile, has a 1,5-relationship between the ketone carbon and the nitrile carbon.
  4. Using LDA with cyclohexanone and acrylonitrile would be expected to give the same product more cleanly, because the lithium enolate is less basic than the enamine.

(a) 1, 2 and 3 only (b) 1 and 2 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  1. Correct. Stork enamines are nucleophilic at the α-carbon without strong base.
  2. Correct. The nitrile makes the terminal CH₂ (position 3 relative to the nitrile carbon) electrophilic.
  3. Correct. Count: C=O carbon 1, ring α-carbon 2, CH₂ 3, CH₂ 4, C≡N carbon 5. The sum rule agrees: 2 + 3 = 5.
  4. Wrong. A lithium enolate is much more basic and reactive than an enamine; with acrylonitrile it tends to cause polymerisation and multiple additions. The enamine’s mildness is the reason it is used.

Practice Q6. Diethyl malonate is treated with 2 equivalents of NaOEt and 1 equivalent of 1,3-dibromopropane; the product is hydrolysed and heated.

Which statements are correct?

  1. The malonate serves as a d² equivalent twice: once intermolecularly and once intramolecularly.
  2. The intermediate is diethyl cyclobutane-1,1-dicarboxylate.
  3. The final product is cyclobutanecarboxylic acid, formed with loss of one CO₂.
  4. With 1,2-dibromoethane instead, the same sequence would give cyclopentanecarboxylic acid.

(a) 1, 2 and 3 only (b) 2 and 3 only (c) 1 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  1. Correct. The first alkylation is intermolecular; the second deprotonation and SN2 closes the ring.
  2. Correct. The malonate carbon plus three CH₂ groups make a four-membered ring.
  3. Correct. The gem-diacid decarboxylates once on heating.
  4. Wrong. Two CH₂ groups plus the malonate carbon give a three-membered ring: cyclopropanecarboxylic acid.

Practice Q7. Match each disconnection product with the synthon pair and decide which statements are correct.

  1. A γ-keto ester RCOCH₂CH₂CO₂Et can come from an enolate (d²) and ethyl bromoacetate (a²).
  2. The same γ-keto ester can come from an acyl anion equivalent (d¹) and ethyl acrylate (a³).
  3. A β-hydroxy ketone can come from a d¹ synthon and an aldehyde (a¹).
  4. A 1,5-diketone requires one umpolung synthon.

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 3 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1 and 2 only
  1. Correct. 2 + 2 = 4: ketone enolate α-carbon bonds to the α-carbon of the bromoester.
  2. Correct. 1 + 3 = 4 (Stetter-type or dithiane conjugate addition).
  3. Wrong. d¹ + a¹ gives a 1,2-relationship (an α-hydroxy ketone). A β-hydroxy ketone needs d² + a¹ (aldol).
  4. Wrong. 1,5 is odd: d² + a³ (Michael) uses two natural synthons.

Quick Revision Table

IdeaFact
Synthonidealised fragment from a disconnection
Synthetic equivalentthe reagent that behaves like it
Notationd = donor, a = acceptor; n = position (heteroatom 0, its carbon 1)
Naturald⁰, a¹, d², a³ (alternating)
Unnatural (umpolung)d¹, a², d³
Sum ruledᵐ + aⁿ → 1,(m + n); odd = natural pair
d² equivalentsLDA enolate, enamine, silyl enol ether, acetoacetate, malonate
a³ equivalentsenones, acrylates, acrylonitrile, Mannich bases
a² equivalentsα-halo carbonyls, epoxides
d¹ equivalentsdithiane anion, CN⁻, nitronate, NHC (Breslow)
R⁻ to a³R₂CuLi; RLi/RMgX go 1,2
⁻CO₂H / ⁺CO₂HCN⁻ / CO₂

Key Takeaways

What’s Next