Umpolung and Acyl Anion Equivalents
CSIR NET organic synthesis: umpolung of reactivity, 1,3-dithianes, cyanide and NHC catalysis, nitronates and Nef reaction, a² electrophiles, acyloins.
- 15 min
On this page · 16 sections
- Prerequisites
- The Hook: Vitamin B₁ Does It Every Second
- What Umpolung Means
- Acyl Anion Equivalents (d¹)
- Electrophilic α-Carbons (a²)
- Homoenolates (d³)
- Reductive (Radical) Umpolung
- Choosing a Method for Each Dissonant Pattern
- Worked Examples
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Synthons and Synthetic Equivalents: the d¹, a², d³ labels and the sum rule.
- Carbanions: why sulfur, nitro and cyano groups stabilise an adjacent negative charge.
- Carbenes: N-heterocyclic carbenes as nucleophilic catalysts.
- Carbonyl Condensations and Enolate Named Reactions: the benzoin condensation in its named-reaction form.
The Hook: Vitamin B₁ Does It Every Second
What Umpolung Means
A carbonyl carbon is naturally an acceptor (a¹). A carbon that can act as a nucleophilic carbonyl carbon is an acyl anion equivalent (d¹). Likewise an α-carbon is naturally a donor (d²); an electrophilic α-carbon is an a² synthon. And a β-carbon is naturally an acceptor (a³); a nucleophilic β-carbon is a homoenolate (d³).
Five ways to invert polarity
| Strategy | How it works | Examples |
|---|---|---|
| 1. Swap the heteroatom | replace C=O by a group that stabilises a carbanion on the same carbon, then restore C=O | 1,3-dithianes (S), nitroalkanes (NO₂, via Nef), O-protected cyanohydrins, metallated enol ethers |
| 2. Nucleophilic catalysis | a catalyst adds to C=O, the adduct is deprotonated at the former carbonyl carbon, and the catalyst is expelled at the end | CN⁻ (benzoin), thiazolium salts and NHCs (benzoin, Stetter), thiamine in enzymes |
| 3. Electron transfer | one-electron reduction of C=O gives a ketyl radical anion, which couples at carbon | pinacol coupling (Mg, Ti, SmI₂), acyloin condensation (Na), SmI₂ ketyl–alkene coupling |
| 4. Metal insertion or exchange | electrophilic C–X becomes nucleophilic C–M | Grignard and organolithium formation from R–X: the simplest umpolung of all |
| 5. Unnatural electrophiles | put a leaving group or an acceptor where the natural pattern has a donor | α-halo carbonyls and epoxides (a²); nitroalkenes (a² after Nef) |
Acyl Anion Equivalents (d¹)
1,3-Dithianes: the Corey–Seebach method
graph LR
A["RCHO"] -->|"HS(CH2)3SH,
BF3·OEt2"| B["2-R-1,3-dithiane"]
B -->|"n-BuLi, THF,
low temperature"| C["2-lithio-2-R-1,3-dithiane
(d1: masked RCO-)"]
C -->|"R'X, epoxide,
or R'2C=O"| D["2,2-disubstituted
dithiane"]
D -->|"HgCl2, H2O
(or NBS, MeI/H2O)"| E["Ketone R-CO-R'"]
D -->|"Raney Ni"| F["Alkane R-CH2-R'"]Why it works:
- The C2–H of a 1,3-dithiane is acidic enough to be removed by n-BuLi because the carbanion is stabilised by the two sulfur atoms (polarisability of sulfur and negative hyperconjugation into σ*(C–S) orbitals; not by d-orbital conjugation).
- The thioacetal is stable to the strong base and nucleophiles used in the alkylation step. Unlike an O,O-acetal it is also stable to aqueous acid, so it must be removed with a thiophilic reagent: Hg(II) salts, N-halosuccinimides, or alkylation of sulfur (MeI) followed by hydrolysis.
- The lithio-dithiane reacts with primary alkyl halides (SN2), epoxides (giving β-hydroxy ketones after deprotection), aldehydes and ketones (giving α-hydroxy ketones) and acylating agents.
- Formaldehyde dithiane (1,3-dithiane itself) can be alkylated twice, giving unsymmetrical ketones R–CO–R′ from two halides.
| Electrophile with 2-lithio-2-R-1,3-dithiane | Product after hydrolysis | Relationship |
|---|---|---|
| R′CH₂Br | R–CO–CH₂R′ | ketone (one-group) |
| R′CHO | R–CO–CH(OH)R′ | 1,2 (α-hydroxy ketone) |
| epoxide | R–CO–CH₂–CH(OH)R′ | 1,3 (β-hydroxy ketone) |
| enone (with HMPA or via cuprate, for 1,4) | R–CO–C–C–CO–R′ | 1,4-diketone |
Cyanide: benzoin condensation and cyanohydrins
Cyanide is the original acyl anion catalyst. In the benzoin condensation (two ArCHO → ArCH(OH)COAr, catalytic NaCN in aqueous ethanol):
- CN⁻ adds to ArCHO to give the cyanohydrin alkoxide.
- Proton transfer from C to O gives a carbanion stabilised by both CN and Ar: the former carbonyl carbon is now nucleophilic (d¹).
- This carbanion adds to a second ArCHO (a¹).
- Proton transfer and loss of CN⁻ give benzoin and regenerate the catalyst.
Cyanide works because it is a good nucleophile, a carbanion-stabilising group and a good leaving group. Stoichiometric versions use O-protected cyanohydrins (O-silyl or O-(1-ethoxyethyl)) of aldehydes: deprotonation with LDA, alkylation, and removal of the protecting group with loss of HCN gives a ketone. In the Strecker synthesis, cyanide plays the d¹ role for the carboxyl carbon of an α-amino acid.
Thiazolium salts and N-heterocyclic carbenes
The C2–H of a thiazolium salt is acidic; deprotonation gives an ylide/carbene that adds to an aldehyde. Proton transfer gives the Breslow intermediate, an enaminol in which the former carbonyl carbon is nucleophilic.
| Reaction | Electrophile | Product | Relationship |
|---|---|---|---|
| Benzoin (cyanide or NHC) | second aldehyde | α-hydroxy ketone | 1,2 |
| Stetter (thiazolium/NHC; cyanide for aromatic aldehydes) | Michael acceptor (enone, acrylate, acrylonitrile) | 1,4-dicarbonyl (or γ-keto nitrile) | 1,4 |
Advantages over cyanide: aliphatic aldehydes work, and chiral NHCs allow enantioselective benzoin and Stetter reactions. The Stetter product, a 1,4-diketone, is the precursor for Paal–Knorr furans, pyrroles and thiophenes.
Nitroalkanes and the Nef reaction
A nitroalkane is acidic at the α-carbon (nitromethane has a pKa of about 10 in water) and the nitronate is a good nucleophile:
- Henry (nitroaldol) reaction with aldehydes → β-nitro alcohols.
- Michael addition to enones → γ-nitro ketones.
- The Nef reaction converts the CH–NO₂ carbon into C=O: the nitronate salt is added to strong aqueous acid (classically giving the carbonyl compound and N₂O); oxidative (KMnO₄, Oxone) and reductive (TiCl₃) variants are also used.
So a nitronate + enone, then Nef, is d¹ + a³ → 1,4-dicarbonyl. A Henry product followed by Nef is a 1,2-relationship (α-hydroxy ketone), and reduction of the nitro group instead gives β-amino alcohols.
Other d¹ equivalents
| Equivalent | Delivers | Unmasking |
|---|---|---|
| α-Lithio enol ether, CH₂=C(OMe)Li (from methyl vinyl ether + t-BuLi) | acetyl anion (CH₃CO⁻) | mild aqueous acid hydrolyses the enol ether to a methyl ketone |
| Acetylide HC≡C⁻ | masked acetyl anion CH₃CO⁻ (E⁺ gives E–C≡CH, hydrated to E–CO–CH₃) | Hg²⁺/H₂SO₄ Markovnikov hydration |
| Acyl-metal species (acylcuprates, acylnickel) | RCO⁻ directly | none |
Electrophilic α-Carbons (a²)
| a² equivalent | Partner | Result |
|---|---|---|
| α-Bromo or α-chloro ketone, α-bromo ester | stabilised enolate (acetoacetate, malonate, enamine) | 1,4-dicarbonyl (2 + 2) |
| Epoxide | enolate or malonate | γ-hydroxy carbonyl, often closing to a γ-lactone |
| Epoxide | heteroatom nucleophile | 1,2-diX (β-amino alcohol) |
| Nitroalkene RCH=CR′NO₂ | nucleophile at the β-carbon (relative to NO₂), then Nef | the nucleophile ends up α to the new C=O: an a² equivalent |
Homoenolates (d³)
A homoenolate is a carbanion β to a carbonyl group (⁻CH₂CH₂COR). Unprotected, it would simply attack its own carbonyl or eliminate. Practical d³ equivalents:
- Grignard reagents of protected 3-halo aldehydes, such as the reagent from 2-(2-bromoethyl)-1,3-dioxolane (or the 1,3-dioxane analogue): the acetal is stable to the organometallic, and acid hydrolysis afterwards reveals the aldehyde. This is umpolung made possible only by a protecting group.
- Metal homoenolates from 1-alkoxy-1-siloxycyclopropanes (ring opening with Ti(IV) or Zn(II) salts) that add to aldehydes.
- NHC catalysis with enals: the Breslow intermediate of an α,β-unsaturated aldehyde is nucleophilic at the β-carbon (an extended enaminol), giving γ-butyrolactones with aldehydes.
d³ + a¹ gives a 1,4-relationship (γ-hydroxy carbonyl → γ-lactone); d³ + a³ gives 1,6.
Reductive (Radical) Umpolung
One-electron reduction of a carbonyl compound puts the unpaired electron and the negative charge on the C=O unit (a ketyl radical anion). Ketyls dimerise at carbon: two acceptor carbons become joined, which ionic chemistry cannot do.
| Reaction | Conditions | Product |
|---|---|---|
| Pinacol coupling | Mg(Hg), TiCl₄/Zn, SmI₂ | 1,2-diol (acetone → pinacol, 2,3-dimethylbutane-2,3-diol) |
| McMurry coupling | low-valent Ti (TiCl₃ or TiCl₄ with LiAlH₄ or Zn), heating | alkene (deoxygenation after pinacol-type coupling) |
| Acyloin condensation | Na in refluxing toluene or xylene; with Me₃SiCl (Rühlmann) the bis-silyl enediol is trapped | α-hydroxy ketone from two esters; intramolecularly, cyclic acyloins of almost any ring size, including medium and large rings |
| Ketyl–olefin coupling | SmI₂ | γ-hydroxy compounds, often cyclic |
Choosing a Method for Each Dissonant Pattern
graph TD
T{"Dissonant target"} --> D12["1,2-diO"]
T --> D14["1,4-diO"]
T --> D16["1,6-diO"]
D12 --> M12["benzoin / acyloin / pinacol;
dithiane or cyanohydrin + C=O;
Henry + Nef;
or alkene + OsO4"]
D14 --> M14["enolate + alpha-halo ketone;
Stetter; nitronate Michael + Nef;
dithiane conjugate addition;
homoenolate + C=O"]
D16 --> M16["reconnection: cyclohexene,
then O3 or KMnO4;
Baeyer-Villiger of cyclohexanone;
d3 + a3"]Worked Examples
Memory Tricks
Don’t Confuse
| This | Is not this |
|---|---|
| Acyl anion equivalent (d¹): dithiane anion, CN⁻ adduct, Breslow intermediate | Enolate (d²): nucleophilic at the α-carbon |
| Benzoin: 1,2 (α-hydroxy ketone) | Stetter: 1,4 (diketone, γ-keto nitrile or ester) |
| Dithiane + HgCl₂/H₂O → ketone | Dithiane + Raney Ni → CH₂ (complete desulfurisation) |
| O,O-acetal: removed by aqueous acid | S,S-acetal: stable to acid; needs Hg²⁺, NBS or alkylation |
| Nef: nitronate → carbonyl | Henry: nitronate + aldehyde → β-nitro alcohol |
| Pinacol: 1,2-diol | Acyloin: α-hydroxy ketone (from esters); McMurry: alkene |
| Homoenolate (d³): nucleophilic β-carbon | Michael acceptor (a³): electrophilic β-carbon |
| Benzoin (umpolung, C–C bond) | Cannizzaro (hydride transfer, no C–C bond) |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not taken from any CSIR NET paper.
Level 1: Foundation
- Name the reagent used to remove a 1,3-dithiane and regenerate the carbonyl group.
- Which relationship (1,2, 1,3 or 1,4) is formed in a Stetter reaction?
- What species is the nucleophile in thiazolium-catalysed benzoin condensation?
Answers
- HgCl₂ (with CaCO₃ or HgO) in aqueous acetonitrile; NBS or MeI/H₂O also work.
- 1,4 (acyl anion + Michael acceptor).
- The Breslow intermediate (enaminol formed from the thiazolium ylide and the aldehyde).
Level 2: Part B Style
Practice Q1. Which of the following is not an acyl anion equivalent?
(a) 2-lithio-2-methyl-1,3-dithiane (b) the anion of the O-trimethylsilyl cyanohydrin of benzaldehyde (c) the lithium enolate of acetone (d) 1-methoxyvinyllithium
Answer: (c)
The acetone enolate is nucleophilic at the α-carbon (d²). The others place the negative charge on a carbon that becomes a carbonyl carbon after unmasking (d¹): dithiane hydrolysis, loss of HCN, and enol ether hydrolysis respectively.
Practice Q2. 2-Phenyl-1,3-dithiane is treated with n-BuLi, then with benzaldehyde, then with HgCl₂ in aqueous acetonitrile. The product is
(a) benzil (b) benzoin (c) deoxybenzoin (PhCOCH₂Ph) (d) 1,2-diphenylethane-1,2-diol
Answer: (b)
The lithiated dithiane (masked PhCO⁻) adds to PhCHO to give an α-hydroxy dithiane (PhCH(OH)–C(Ph)(S)(S)); hydrolysis reveals PhCO–CH(OH)Ph, benzoin. It is the stoichiometric version of the cyanide-catalysed benzoin condensation (d¹ + a¹ = 1,2).
Practice Q3. Nitroethane is added to methyl vinyl ketone with a base, and the product is subjected to the Nef reaction. The final product is
(a) hexane-2,5-dione (b) heptane-2,6-dione (c) hex-5-en-2-one (d) 5-aminohexan-2-one
Answer: (a)
The Michael adduct is CH₃CH(NO₂)CH₂CH₂COCH₃; Nef turns CH(NO₂) into C=O: CH₃COCH₂CH₂COCH₃. (d) would need reduction of the nitro group, not Nef.
Practice Q4. Sodium metal in refluxing xylene with diethyl hexanedioate (diethyl adipate), followed by aqueous work-up, gives mainly
(a) ethyl 2-oxocyclopentanecarboxylate (b) 2-hydroxycyclohexan-1-one (c) cyclohexane-1,2-diol (d) cyclopentanone
Answer: (b)
The acyloin condensation joins the two ester carbons (C1 and C6) through ketyl-type radical coupling, closing a six-membered ring that bears an α-hydroxy ketone. (a) is the Dieckmann product, formed with an alkoxide base (enolate chemistry), which joins C2 to C6 and gives a five-membered ring.
Level 3: Part C Style
Practice Q5. 1,3-Dithiane is treated in sequence with (i) n-BuLi, then 1-bromobutane; (ii) n-BuLi, then benzyl bromide; (iii) HgCl₂, CaCO₃, aqueous MeCN.
Which statements are correct?
- 1,3-Dithiane serves as a formyl anion equivalent in step (i) and the monoalkylated dithiane as a pentanoyl anion equivalent in step (ii).
- The final product is 1-phenylhexan-2-one.
- Replacing step (iii) by Raney Ni would give hexylbenzene.
- Replacing step (iii) by dilute H₂SO₄ at room temperature would give the same ketone.
(a) 1, 2 and 3 only (b) 2 and 3 only (c) 1 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- Correct. The C2 of 1,3-dithiane carries H (masked HCO⁻); after butylation, it is a masked C₄H₉CO⁻ (pentanoyl).
- Correct. C2 carries butyl and benzyl; hydrolysis gives PhCH₂–CO–CH₂CH₂CH₂CH₃ = 1-phenylhexan-2-one.
- Correct. Desulfurisation turns C2 into CH₂: PhCH₂–CH₂–C₄H₉ = Ph(CH₂)₅CH₃, hexylbenzene.
- Wrong. Thioacetals are stable to dilute aqueous acid.
Practice Q6. Consider N-heterocyclic carbene (NHC) catalysis.
- In the benzoin reaction the NHC turns the aldehyde carbon from an a¹ into a d¹ centre.
- The Stetter reaction of butanal with methyl vinyl ketone gives octane-2,5-dione.
- With an α,β-unsaturated aldehyde, the NHC adduct can react at the β-carbon as a homoenolate (d³).
- The NHC is consumed stoichiometrically because it ends up bonded to the product.
(a) 1, 2 and 3 only (b) 1 and 3 only (c) 2 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- Correct. Via the Breslow intermediate.
- Correct. The butanoyl unit CH₃CH₂CH₂CO⁻ (from butanal, d¹) adds to the β-carbon of CH₂=CHCOCH₃: CH₃CH₂CH₂CO–CH₂CH₂–COCH₃. Number from the methyl ketone end: C1 CH₃, C2 C=O, C3, C4, C5 C=O, then three more carbons: octane-2,5-dione.
- Correct. The extended Breslow intermediate is nucleophilic at the β-carbon.
- Wrong. The carbene is released when the tetrahedral intermediate collapses; it is a catalyst.
Practice Q7. Which statements about routes to 1,4-dicarbonyl compounds are correct?
- Ethyl acetoacetate anion + phenacyl bromide (PhCOCH₂Br), then hydrolysis and decarboxylation, gives 1-phenylpentane-1,4-dione.
- In statement 1, phenacyl bromide is an a² synthon equivalent.
- The 1,4-diketone from statement 1 can be converted into a 2,5-disubstituted furan with acid (Paal–Knorr).
- Acetone enolate + methyl vinyl ketone gives a 1,4-diketone directly.
(a) 1, 2 and 3 only (b) 1 and 2 only (c) 3 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- Correct. The product after decarboxylation is CH₃COCH₂CH₂COPh: a five-carbon chain with C=O at C1 (Ph-bearing) and C4, 1-phenylpentane-1,4-dione.
- Correct. The α-carbon of phenacyl bromide is electrophilic: a².
- Correct. Acid-catalysed cyclodehydration of a 1,4-diketone gives 2-methyl-5-phenylfuran.
- Wrong. d² + a³ gives a 1,5-diketone (heptane-2,6-dione).
Quick Revision Table
| Idea | Fact |
|---|---|
| Umpolung | temporary polarity reversal; mask, react, unmask |
| d¹ (acyl anion) | dithiane anion, CN⁻ adduct, Breslow intermediate, nitronate (then Nef), metallated enol ether, alkyne (then hydration) |
| Dithiane | make: RCHO + HS(CH₂)₃SH, BF₃; deprotonate: n-BuLi; cleave: HgCl₂/H₂O; Raney Ni → CH₂ |
| Benzoin | 2 ArCHO, CN⁻ or NHC → α-hydroxy ketone (1,2) |
| Stetter | RCHO + Michael acceptor, NHC → 1,4-dicarbonyl |
| Nef | nitronate + strong aqueous acid → C=O (N₂O) |
| a² | α-halo carbonyls, epoxides, nitroalkenes |
| d³ (homoenolate) | Grignard of 2-(2-bromoethyl)-1,3-dioxolane; siloxycyclopropanes; NHC + enal |
| Radical umpolung | pinacol (1,2-diol), acyloin (α-hydroxy ketone), McMurry (alkene) |
| Biology | thiamine pyrophosphate (pyruvate decarboxylase, transketolase) |
Key Takeaways
What’s Next
- Linear and Convergent Synthesis: putting disconnections together into an efficient overall plan.
- Protecting Groups: the acetal that makes a homoenolate Grignard possible, and much more.
- Carbenes: the structure of NHCs.
- Back to the chapter overview.