Azoles and Diazines: Heterocycles with Two Heteroatoms
CSIR NET organic chemistry: imidazole, pyrazole, oxazole, isoxazole, thiazole and the diazines; basicity, tautomerism, reactivity, and named syntheses of each.
- 16 min
On this page · 16 sections
- Prerequisites
- The Hook: Histidine’s Proton Shuttle
- Classification and π-Electron Counting
- Basicity: Reading the Table
- Tautomerism
- Reactivity of the Azoles
- Synthesis of the Azoles
- The Diazines
- Fused and Saturated Rings with Two Heteroatoms
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Pyrrole, Furan and Thiophene: the “pyrrole-type” heteroatom that donates two π electrons.
- Pyridine, Pyridones and Pyrylium Salts: the “pyridine-type” nitrogen that donates one π electron and keeps a basic lone pair.
- Cycloaddition Reactions: 1,3-dipolar cycloadditions that build isoxazoles and pyrazoles, and Diels–Alder reactions of oxazoles.
The Hook: Histidine’s Proton Shuttle
Classification and π-Electron Counting
Every azole and diazine ring atom is sp². Each heteroatom is one of two types:
- Pyrrole-type (N–H, O, S in a five-membered ring): gives two π electrons, no basic lone pair in the π system.
- Pyridine-type (=N–): gives one π electron and keeps an in-plane lone pair, which is basic.
| Ring | Size | Heteroatoms (positions) | Type | pKaH (approx.) |
|---|---|---|---|---|
| Imidazole | 5 | N1–H, N3 (1,3-azole) | pyrrole-N + pyridine-N | 7.0 |
| Pyrazole | 5 | N1–H, N2 (1,2-azole) | pyrrole-N + pyridine-N | 2.5 |
| Oxazole | 5 | O1, N3 | pyrrole-O + pyridine-N | 0.8 |
| Isoxazole | 5 | O1, N2 | pyrrole-O + pyridine-N | about −3 |
| Thiazole | 5 | S1, N3 | pyrrole-S + pyridine-N | 2.5 |
| Isothiazole | 5 | S1, N2 | pyrrole-S + pyridine-N | about −0.5 |
| Pyridazine | 6 | N1, N2 (1,2-diazine) | two pyridine-N | 2.3 |
| Pyrimidine | 6 | N1, N3 (1,3-diazine) | two pyridine-N | 1.3 |
| Pyrazine | 6 | N1, N4 (1,4-diazine) | two pyridine-N | 0.6 |
| Pyridine (reference) | 6 | N1 | pyridine-N | 5.2 |
All are 6π aromatic. Protonation always occurs on the pyridine-type nitrogen.
Basicity: Reading the Table
Imidazole is also a weak acid (N–H pKa about 14.5), more acidic than pyrrole (about 17.5), because the imidazolide anion is delocalised over two nitrogens. Pyrazole N–H has similar acidity.
Tautomerism
N-unsubstituted imidazoles and pyrazoles undergo fast annular tautomerism: the N–H proton moves between the two nitrogens.
- 4-Methylimidazole and 5-methylimidazole interconvert rapidly; the compound is written 4(5)-methylimidazole.
- 3-Methylpyrazole and 5-methylpyrazole likewise: 3(5)-methylpyrazole.
- Consequence: N-alkylation of such a compound gives two regioisomers (for example, 1,4- and 1,5-dimethylimidazole), in proportions set by sterics and by which tautomer and which nitrogen reacts.
- The tautomerism is frozen once N is substituted.
Hydroxy derivatives of the azoles and diazines (oxazolones, pyrazolones, pyrimidinones such as uracil) exist mainly in the oxo (lactam) forms, as for the pyridones.
Reactivity of the Azoles
Electrophilic substitution
A pyridine-type nitrogen deactivates the ring, so azoles are less reactive than pyrrole, furan or thiophene, but still more reactive than pyridine. Imidazole is the most reactive, oxazole the least.
| Azole | Preferred SEAr site | Notes |
|---|---|---|
| Imidazole | C4/C5 | nitration and sulfonation occur on the imidazolium ion, slowly; halogenation is easy and can go to the 2,4,5-trihalo compound |
| Pyrazole | C4 | the only position not adjacent to a nitrogen; nitration, halogenation, Vilsmeier all at C4 |
| Thiazole | C5 | needs activating groups for most reactions; 2-aminothiazole substitutes readily at C5 |
| Oxazole | C5 (C4) | very sluggish unless activated by electron-donating groups |
| Isoxazole | C4 | as for pyrazole |
Reactions at nitrogen
The pyridine-type nitrogen is alkylated, acylated and coordinates metals. N-Acylimidazoles are reactive acylating agents: 1,1’-carbonyldiimidazole (CDI) activates carboxylic acids for amide and ester formation, and imidazole is a nucleophilic catalyst for acyl transfer, as in the histidine example.
C2–H acidity and carbenes
The C2–H between two heteroatoms in 1,3-azoles is the most acidic ring C–H.
- Thiazole and oxazole are lithiated at C2 by n-BuLi. 2-Lithiooxazoles are in equilibrium with ring-opened isocyanide enolates, which complicates their use; 2-lithiothiazoles are better behaved.
- Imidazolium and thiazolium salts lose the C2 proton to bases to give N-heterocyclic carbenes (NHCs). Stable imidazol-2-ylidenes with bulky N-substituents have been isolated and are widely used as ligands.
- The thiazolium ring of thiamine (vitamin B1) forms a C2 ylide/carbene that adds to aldehydes and pyruvate. The adduct (the Breslow intermediate) is an acyl anion equivalent: this is the basis of thiazolium- and NHC-catalysed benzoin and Stetter reactions. See Umpolung and Acyl Anion Equivalents.
Ring opening and cycloaddition
| Ring | Characteristic reaction | Use |
|---|---|---|
| Isoxazole | weak N–O bond: H₂/Raney Ni or Mo(CO)₆ cleaves it to a β-enaminone (→ β-diketone or β-hydroxyketone after hydrolysis); 3-unsubstituted isoxazoles open with base to β-ketonitriles | isoxazole as a masked 1,3-dicarbonyl |
| Oxazole | acts as an azadiene in Diels–Alder reactions: with alkenes, then loss of water (or alcohol), gives 3-hydroxypyridines (Kondrat’eva); with alkynes, loss of a nitrile gives furans | the pyridine ring of vitamin B6 (pyridoxine) |
| Thiazole | Raney Ni desulfurisation and ring cleavage | thiazole as a masked aminocarbonyl unit |
| 1-Pyrazoline (4,5-dihydro-3H-pyrazole, from diazoalkane + alkene) | loses N₂ on heating or photolysis to give cyclopropanes | cyclopropanation via diazo cycloaddition |
Synthesis of the Azoles
The general retrosynthetic logic: a five-membered azole is a C–C–C unit (1,3-dicarbonyl or equivalent) plus an N–N, N–O unit (hydrazine, hydroxylamine) for 1,2-azoles, or a C–C unit (α-functionalised ketone) plus a C–N or N–C–N/S–C–N unit for 1,3-azoles. 1,3-Dipolar cycloadditions offer a second general route to 1,2-azoles.
1,2-Azoles
| Ring | Classical synthesis | Cycloaddition route |
|---|---|---|
| Pyrazole | Knorr pyrazole synthesis: 1,3-dicarbonyl + hydrazine. Acetylacetone + N₂H₄ → 3,5-dimethylpyrazole. With RNHNH₂ and an unsymmetrical diketone, two regioisomers can form. α,β-Unsaturated ketones + hydrazine give pyrazolines, which are oxidised to pyrazoles. β-Ketoesters + hydrazine give pyrazolones | diazoalkanes (e.g. CH₂N₂) or nitrile imines + alkynes |
| Isoxazole | 1,3-dicarbonyl + hydroxylamine (regioisomer mixtures possible) | nitrile oxides + alkynes → 3,5-disubstituted isoxazoles (regioselective). Nitrile oxides come from aldoximes (NCS, then base) or from primary nitroalkanes + PhNCO (Mukaiyama). With alkenes, isoxazolines form |
| Isothiazole | less common; from β-iminothioamides or related precursors by oxidative S–N bond formation | — |
1,3-Azoles
| Ring | Name | Components | Product |
|---|---|---|---|
| Imidazole | Debus–Radziszewski | 1,2-dicarbonyl + aldehyde + 2 NH₃ (as NH₄OAc) | 2,4,5-trisubstituted imidazoles; benzil + benzaldehyde → 2,4,5-triphenylimidazole (lophine) |
| Imidazole | α-Haloketone + amidine | amidine N attacks C–X, then condenses with C=O | 2,4-disubstituted imidazoles |
| Imidazole | van Leusen imidazole | TosMIC + aldimine, base | 1,5-disubstituted (or 1,4,5-) imidazoles |
| Imidazole | Marckwald | α-aminoketone + thiocyanate (KSCN) | 2-mercaptoimidazoles (desulfurise to imidazoles) |
| Oxazole | Robinson–Gabriel | 2-acylamino ketone + dehydrating agent (H₂SO₄, POCl₃, P₂O₅) | 2,5-disubstituted oxazoles |
| Oxazole | van Leusen oxazole | TosMIC + aldehyde, K₂CO₃/MeOH | 5-substituted oxazoles (loss of TsH) |
| Oxazole | Fischer oxazole | aldehyde cyanohydrin + aldehyde, dry HCl | 2,5-diaryloxazoles |
| Oxazole | α-Haloketone + amide (Bredereck uses formamide) | — | oxazoles |
| Thiazole | Hantzsch thiazole | α-haloketone + thioamide (or thiourea → 2-aminothiazoles) | chloroacetone + thiourea → 2-amino-4-methylthiazole |
| Thiazole | Gabriel thiazole | 2-acylamino ketone + P₄S₁₀ | thiazole analogue of Robinson–Gabriel |
The Diazines
Reactivity
Two pyridine-type nitrogens make the ring even more π-deficient than pyridine.
- SEAr is very difficult on the parent diazines. In pyrimidine the only position not α or γ to a nitrogen is C5, and activated pyrimidines (amino, hydroxy/oxo groups, as in uracil and cytosine) substitute there: uracil brominates and nitrates at C5.
- Nucleophilic substitution is easy. 2-, 4- and 6-Halopyrimidines, 3-halopyridazines and 2-halopyrazines all undergo SNAr more readily than 2-chloropyridine. In 2,4-dichloropyrimidine the C4 chlorine is usually displaced first by amines.
- Organolithium addition and Chichibabin-type amination occur at positions α/γ to nitrogen.
- Methyl groups α or γ to a ring nitrogen are acidic, as in the picolines.
- N-Oxidation occurs once, at one nitrogen.
Syntheses
| Ring | Classical route |
|---|---|
| Pyrimidine | 1,3-dicarbonyl (C–C–C) + N–C–N unit (amidine, urea, thiourea, guanidine). Amidines give 2-substituted pyrimidines; urea gives 2-pyrimidinones; guanidine gives 2-aminopyrimidines; thiourea gives 2-thiouracils. Barbituric acid: diethyl malonate + urea, NaOEt |
| Pyrimidine | Biginelli reaction: aldehyde + β-ketoester + urea, acid catalyst → 3,4-dihydropyrimidin-2(1H)-ones (multicomponent) |
| Pyrazine | self-condensation of two α-aminoketones → 2,5-dihydropyrazine → oxidation (often by air); or a 1,2-diamine + 1,2-dicarbonyl → dihydropyrazine → oxidation |
| Quinoxaline (benzopyrazine) | o-phenylenediamine + 1,2-dicarbonyl → aromatic directly (no oxidation needed) |
| Pyridazine | 1,4-dicarbonyl + hydrazine → dihydropyridazine → oxidation (direct if the 1,4-dicarbonyl is unsaturated); maleic anhydride + N₂H₄ → maleic hydrazide (pyridazine-3,6-dione); 1,2,4,5-tetrazines + alkynes (inverse-electron-demand Diels–Alder, loss of N₂) → pyridazines |
Fused and Saturated Rings with Two Heteroatoms
| Ring | Made from | Note |
|---|---|---|
| Benzimidazole | o-phenylenediamine + carboxylic acid (Phillips, with acid and heat) or + aldehyde with an oxidant | imidazole fused at C4–C5 to benzene |
| Benzoxazole | 2-aminophenol + carboxylic acid or aldehyde/oxidant | — |
| Benzothiazole | 2-aminothiophenol + aldehyde, acid or acyl chloride | firefly luciferin contains benzothiazole |
| Purine | imidazole fused to pyrimidine; Traube synthesis: 4,5-diaminopyrimidine + formic acid (or another one-carbon unit) | adenine, guanine; see Carbohydrates, Lipids, Nucleic Acids and Vitamins |
| 1,3-Dioxolane, 1,3-dioxane | carbonyl + diol, acid | carbonyl protecting groups; see Protecting Groups |
| 1,3-Dithiane | carbonyl + propane-1,3-dithiol, Lewis acid | C2–H lithiation gives an acyl anion equivalent (Corey–Seebach) |
| Oxazolidin-2-one | 1,2-amino alcohol + phosgene equivalent (CDI, diethyl carbonate) | Evans chiral auxiliaries; see Chiral Auxiliaries |
| Piperazine, morpholine | — | saturated bases (secondary amines); behave as ordinary amines |
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Imidazole (1,3), pKaH 7.0 | Pyrazole (1,2), pKaH 2.5 | |
| Knorr pyrazole synthesis (hydrazine + 1,3-dicarbonyl) | Knorr pyrrole synthesis (α-aminoketone + β-ketoester) | |
| Hantzsch thiazole (α-haloketone + thioamide) | Hantzsch pyridine (2 β-ketoesters + aldehyde + NH₃) | |
| van Leusen oxazole (TosMIC + aldehyde) | van Leusen imidazole (TosMIC + imine) and pyrrole (TosMIC + Michael acceptor) | |
| Robinson–Gabriel (acylaminoketone + H₂SO₄ → oxazole) | Gabriel thiazole (acylaminoketone + P₄S₁₀ → thiazole) | |
| Pyrazine (1,4) from α-aminoketones + oxidation | Quinoxaline from o-phenylenediamine + 1,2-dicarbonyl (no oxidant needed) | |
| Oxazole + alkene → pyridine (−H₂O) | Oxazole + alkyne → furan (−RCN) | |
| Biginelli product: dihydropyrimidinone | Hantzsch product: dihydropyridine |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- Which nitrogen of imidazole is protonated?
- What product forms from acetylacetone and hydrazine?
- What is the product of chloroacetone and thiourea?
Answers
- N3, the pyridine-type nitrogen with its lone pair in the ring plane.
- 3,5-Dimethylpyrazole (Knorr pyrazole synthesis).
- 2-Amino-4-methylthiazole (Hantzsch thiazole synthesis).
Level 2: Part B Style
Practice Q1. The correct order of basicity (pKaH) is:
(a) imidazole > thiazole > oxazole > pyrrole (b) oxazole > thiazole > imidazole > pyrrole (c) pyrazole > imidazole > oxazole > thiazole (d) thiazole > imidazole > pyrrole > oxazole
Answer: (a)
Approximate pKaH: imidazole 7.0, thiazole 2.5, oxazole 0.8, pyrrole −3.8. Oxygen’s electronegativity lowers oxazole’s basicity; pyrrole has no pyridine-type nitrogen at all.
Practice Q2. Benzil, benzaldehyde and excess ammonium acetate are heated in acetic acid. The product is:
(a) 2,4,5-triphenyloxazole (b) 2,4,5-triphenylimidazole (c) 2,3-diphenylquinoxaline (d) 3,4,5-triphenylpyrazole
Answer: (b)
Debus–Radziszewski synthesis: the 1,2-dicarbonyl supplies C4 and C5, the aldehyde supplies C2, and two NH₃ supply N1 and N3. The product is lophine. Quinoxaline would need o-phenylenediamine.
Practice Q3. Which reaction gives a 5-substituted oxazole directly from an aldehyde?
(a) Aldehyde + TosMIC, K₂CO₃, MeOH (b) Aldehyde + hydroxylamine, then NCS (c) Aldehyde + thiourea + α-haloketone (d) Aldehyde + ethyl acetoacetate + urea, HCl
Answer: (a)
van Leusen oxazole synthesis: the TosMIC anion adds to the aldehyde, the alkoxide cyclises onto the isocyanide, and elimination of TsH aromatises the ring. (b) gives a nitrile oxide precursor (isoxazoles), (c) a thiazole, (d) a Biginelli dihydropyrimidinone.
Practice Q4. 2,4-Dichloropyrimidine is treated with one equivalent of morpholine at room temperature. The main product is:
(a) 2-chloro-4-morpholinopyrimidine (b) 4-chloro-2-morpholinopyrimidine (c) 5-morpholinopyrimidine (d) no reaction, because pyrimidines are unreactive
Answer: (a)
Both chlorines are activated for SNAr, but in 2,4-dichloropyrimidine the C4 position usually reacts first with amines. C5 is not an SNAr position. Pyrimidines are very reactive toward nucleophiles.
Level 3: Part C Style
Practice Q5. Take pKaH(imidazole) = 7.0 and pKaH(pyrazole) = 2.5. Which statements are correct?
- At pH 7.4, about 28% of imidazole is protonated.
- At pH 6.0, about 91% of imidazole is protonated.
- At pH 7.4, the fraction of pyrazole that is protonated is about \( 1.3 \times 10^{-5} \).
- Imidazole is a better buffer than pyrazole near pH 7 because its pKaH lies close to 7.
(a) 1, 2, 3 and 4 (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2 and 4 only
Answer: (a)
Fraction protonated = \( 1/(1 + 10^{\text{pH} - \text{p}K_{aH}}) \).
- \( 1/(1 + 10^{0.4}) = 1/(1 + 2.512) = 0.285 \): about 28% (correct).
- \( 1/(1 + 10^{-1.0}) = 1/1.1 = 0.909 \): about 91% (correct).
- \( 1/(1 + 10^{4.9}) \approx 1.26 \times 10^{-5} \) (correct).
- Buffer capacity is greatest near pH = pKa (correct).
Practice Q6. Diethyl malonate (16.02 g; M = 160.17 g mol⁻¹) and excess urea are heated with sodium ethoxide in ethanol; acidification gives B (C₄H₄N₂O₃, M = 128.09 g mol⁻¹), 9.61 g. Which option is correct?
(a) B is barbituric acid; yield about 75% (b) B is uracil; yield about 75% (c) B is barbituric acid; yield about 60% (d) B is 5,5-diethylbarbituric acid; yield about 75%
Answer: (a)
- Malonate (C–C–C) + urea (N–C–N) → pyrimidine-2,4,6(1H,3H,5H)-trione, barbituric acid, with loss of 2 EtOH. Its formula C₄H₄N₂O₃ fits.
- Moles of malonate = 16.02/160.17 = 0.1000 mol; theoretical mass = 0.1000 × 128.09 = 12.81 g.
- Yield = 9.61/12.81 = 75.0%. Uracil is C₄H₄N₂O₂; 5,5-diethylbarbituric acid (barbital) needs diethyl diethylmalonate and is C₈H₁₂N₂O₃.
Practice Q7. Benzaldoxime is treated with NCS and then Et₃N in the presence of phenylacetylene, giving I (C₁₅H₁₁NO, M = 221.26 g mol⁻¹). I is hydrogenated over Raney nickel and the product is hydrolysed with aqueous acid. Which statements are correct?
- The 1,3-dipole is benzonitrile oxide, formed by chlorination of the oxime and dehydrochlorination.
- I is 3,5-diphenylisoxazole.
- Hydrogenolysis cleaves the N–O bond to give a β-enaminone, which hydrolyses to 1,3-diphenylpropane-1,3-dione.
- Starting from 0.050 mol of oxime, the theoretical mass of I is about 11.1 g.
(a) 1, 2, 3 and 4 (b) 1 and 2 only (c) 2 and 3 only (d) 1, 3 and 4 only
Answer: (a)
- Correct. PhCH=NOH + NCS → hydroximoyl chloride; Et₃N eliminates HCl → PhC≡N⁺–O⁻.
- Correct. Nitrile oxide + terminal alkyne gives the 3,5-disubstituted isoxazole regioselectively: 3-Ph from the dipole, 5-Ph from the alkyne.
- Correct. The weak N–O bond is cleaved; the β-enaminone PhC(NH₂)=CH–COPh hydrolyses to dibenzoylmethane. The isoxazole is a masked 1,3-diketone.
- Correct. 0.050 × 221.26 = 11.06 g, about 11.1 g.
Quick Revision Table
| Ring | pKaH | SEAr site | Signature syntheses | Special chemistry |
|---|---|---|---|---|
| Imidazole | 7.0 | C4/C5 | Debus–Radziszewski; haloketone + amidine; van Leusen | amphoteric; N-acyl transfer (CDI); NHCs; 4(5)-tautomerism |
| Pyrazole | 2.5 | C4 | Knorr (1,3-dicarbonyl + N₂H₄); diazo + alkyne | 3(5)-tautomerism; 1-pyrazolines (diazoalkane adducts) lose N₂ |
| Oxazole | 0.8 | C5 (if activated) | Robinson–Gabriel; van Leusen; Fischer | Diels–Alder → pyridines (B6) or furans; 2-Li ring-opens |
| Isoxazole | about −3 | C4 | NH₂OH + 1,3-dicarbonyl; nitrile oxide + alkyne | N–O cleavage → 1,3-dicarbonyl |
| Thiazole | 2.5 | C5 | Hantzsch (haloketone + thioamide/thiourea); Gabriel | C2-lithiation; thiazolium/thiamine umpolung |
| Pyridazine | 2.3 | — | 1,4-dicarbonyl + N₂H₄; tetrazine + alkyne | most basic diazine |
| Pyrimidine | 1.3 | C5 (activated only) | 1,3-dicarbonyl + amidine/urea/guanidine; Biginelli | SNAr at C4 > C2; nucleobases |
| Pyrazine | 0.6 | — | α-aminoketone dimerisation + [O]; diamine + diketone | weakest diazine base |
Key Takeaways
What’s Next
- Heterocyclic Compounds: Quick Revision: the whole unit on one page.
- Umpolung and Acyl Anion Equivalents: thiazolium and NHC catalysis in detail.
- Cycloaddition Reactions: FMO control of the nitrile oxide and oxazole cycloadditions used here.
- Back to the start of the unit: Heterocyclic Compounds.