Skip to content

Redox Chemistry of Lanthanides and Actinides

CSIR NET chemistry: why +3 dominates for Ln, Ce(IV), Eu(II), Yb(II) and SmI₂, actinide oxidation states, actinyl ions, Pu redox and Latimer diagrams.

  • 17 min read
  • Updated
On this page · 14 sections
  1. Prerequisites
  2. The Hook: Separating Plutonium by Changing Its Charge
  3. Lanthanides: Why +3?
  4. Cerium(IV): the Useful Oxidant
  5. Divalent Lanthanides: SmI₂ and Friends
  6. Actinides: Two Halves of a Series
  7. Lanthanides vs Actinides: Redox Summary
  8. Memory Tricks
  9. Don’t Confuse
  10. Common Mistakes
  11. Practice
  12. Quick Revision Table
  13. Key Takeaways
  14. What’s Next

Prerequisites

The Hook: Separating Plutonium by Changing Its Charge

Lanthanides: Why +3?

All lanthanides form +3 ions. The ionisation energies \( I_1 + I_2 + I_3 \) are moderate, and the third electron comes from the contracted, stabilised 4f shell (or from 5d for La, Gd, Lu). Removing a fourth electron costs much more, and the extra lattice or hydration energy of a 4+ ion does not repay it except in special cases. Going the other way, stopping at +2 forfeits the large extra hydration or lattice energy of a small 3+ ion, which more than repays \( I_3 \) for most elements.

A Born–Haber view makes this concrete. For \( \text{Ln(s)} \rightarrow \text{Ln}^{3+}(\text{aq}) + 3e^-(\text{g}) \):

$$\Delta H \approx \Delta_{\text{atom}}H + (I_1 + I_2 + I_3) + \Delta_{\text{hyd}}H(\text{Ln}^{3+})$$

The hydration enthalpy of a 3+ ion is very large and grows smoothly across the series (smaller ions, lanthanide contraction). Departures from +3 happen exactly where \( I_3 \) or \( I_4 \) departs from its smooth trend.

The exceptions follow the configuration

IonConfigurationReason it is accessibleStatus
Ce⁴⁺\( 4f^0 \)\( I_4 \) unusually low (reaches the empty-shell \( f^0 \))stable in water as a strong oxidant
Pr⁴⁺, Tb⁴⁺\( 4f^1 \), \( 4f^7 \)\( f^7 \) half-shell for Tb⁴⁺only in solid oxides and fluorides (PrO₂, TbO₂, TbF₄); oxidise water
Eu²⁺\( 4f^7 \)\( I_3 \) unusually high (would break the half shell)the most stable Ln²⁺; mild reductant
Yb²⁺\( 4f^{14} \)\( I_3 \) high (would break the full shell)strong reductant; reduces water
Sm²⁺\( 4f^6 \)\( I_3 \) high, though no special shellvery strong reductant (SmI₂)
Tm²⁺, Dy²⁺, Nd²⁺\( 4f^{13} \), \( 4f^{10} \), \( 4f^4 \)in solid diiodides and in non-aqueous organometallic chemistry only

The third ionisation energies of Eu and Yb are the two highest in the series (each a few hundred kJ mol⁻¹ above Gd and Lu), which is why these are the classical divalent lanthanides. The \( f^0 \)/\( f^7 \)/\( f^{14} \) pattern is the same “special stability” seen in transition metals, but here the energy differences are large enough to show in the chemistry only at these points.

Standard potentials

Couple\( E^\circ \) / V (approximate)Meaning
Ln³⁺/Ln (most Ln)about −2.3metals as electropositive as Mg (Mg²⁺/Mg −2.37 V)
Ce⁴⁺/Ce³⁺+1.44 (1 M H₂SO₄), +1.61 (1 M HNO₃), +1.70 (1 M HClO₄)strong oxidant; value depends on anion complexation
Eu³⁺/Eu²⁺−0.35Eu²⁺ is a mild reductant
Yb³⁺/Yb²⁺−1.05Yb²⁺ reduces water
Sm³⁺/Sm²⁺−1.55Sm²⁺ is a powerful reductant

The Ce(IV) potential changes with the acid because sulfate (and, less so, nitrate) complexes Ce⁴⁺ more strongly than Ce³⁺, which stabilises the +4 state and lowers \( E \). These are formal potentials for the stated medium; in analytical work you always use the one for the medium in the flask.

The metals

The lanthanide metals are strong reductants. They tarnish in air, burn to Ln₂O₃ (Ce gives CeO₂, Pr gives Pr₆O₁₁ and Tb gives Tb₄O₇, mixed-valent oxides), react slowly with cold water and quickly with hot water or dilute acid, liberating hydrogen:

$$2\,\text{Ln} + 6\,\text{H}_2\text{O} \rightarrow 2\,\text{Ln(OH)}_3 + 3\,\text{H}_2$$

They combine on heating with H₂, N₂, C, S and the halogens. Eu and Yb, the “alkaline-earth-like” members, also dissolve in liquid ammonia to give blue solutions.

Cerium(IV): the Useful Oxidant

Cerium(IV) is the only Ln(IV) state with a solution chemistry.

  • Reagents: ceric ammonium nitrate (CAN), \( (\text{NH}_4)_2[\text{Ce(NO}_3)_6] \), with Ce 12-coordinate by six bidentate nitrates; and cerium(IV) sulfate in sulfuric acid.
  • Thermodynamics vs kinetics: \( E^\circ(\text{Ce}^{4+}/\text{Ce}^{3+}) \) exceeds \( E^\circ(\text{O}_2/\text{H}_2\text{O}) = +1.23 \) V, so Ce⁴⁺ can in principle oxidise water. The reaction is slow, and acidified Ce(IV) sulfate solutions keep for long periods; that is why they serve as volumetric standards (Analytical Applications).
  • One-electron oxidant: Ce⁴⁺ + e⁻ → Ce³⁺, with no intermediate oxidation states (unlike permanganate). This gives clean 1:1 stoichiometry in titrations and single-electron (radical) chemistry in organic synthesis, for example CAN removal of p-methoxybenzyl groups and oxidation of hydroquinones to quinones.
  • Hydrolysis: Ce⁴⁺ is small and highly charged, so it hydrolyses and polymerises unless the acid is strong. Ce(IV) solutions are kept in at least moderately concentrated acid.
  • Materials: CeO₂ can lose and regain oxygen reversibly by Ce⁴⁺/Ce³⁺ cycling. This “oxygen storage” is used in automotive three-way catalysts. The Ce⁴⁺/Ce³⁺ couple is also the classic metal catalyst of the oscillating Belousov–Zhabotinsky reaction.

Divalent Lanthanides: SmI₂ and Friends

  • Eu²⁺ behaves like Sr²⁺ or Ba²⁺: similar size, insoluble sulfate (EuSO₄) and carbonate. This is the basis of the classic separation of europium by reduction (Analytical Applications).
  • Yb²⁺ and Sm²⁺ reduce water, so they are handled under inert conditions.
  • Samarium(II) iodide, SmI₂, made from Sm metal and 1,2-diiodoethane (or I₂) in THF, gives a deep blue solution. It is a one-electron reductant (Kagan’s reagent) used for ketyl-radical chemistry: pinacol couplings, Barbier-type additions, Reformatsky-type reactions, and reductive cleavage of C–X and C–O bonds. Adding HMPA greatly increases its reducing power.
  • Under carefully chosen non-aqueous conditions, diiodides of Tm, Dy and Nd have also been isolated; they are still stronger reductants than SmI₂.
graph LR
    A["Ce4+ (f0)
oxidant, +1.44 to +1.70 V"] --- B["Ln3+
the default"] B --- C["Eu2+ (f7)
-0.35 V, mild"] B --- D["Yb2+ (f14)
-1.05 V"] B --- E["Sm2+ (f6)
-1.55 V, SmI2"]

Actinides: Two Halves of a Series

The early actinides (Th–Np, and to a lesser extent Pu and Am) show many oxidation states and high maximum states, like the d-block metals. From americium onward the actinides settle into +3, like the lanthanides.

ElementThPaUNpPuAmCmBkCfEs–MdNoLr
Most stable in water+4+5+6+5+4+3+3+3+3+3+2+3
Maximum (common)+4+5+6+7+7+6+4+4+4 (solid)+3+3+3

Why the early actinides use more electrons. In the early actinides the 5f, 6d and 7s levels lie close in energy, and the 5f orbitals are radially extended (less buried than 4f) and further destabilised by relativistic effects. Removing many electrons is affordable, and the high-charge ions are stabilised by covalent bonding to oxide or fluoride. As Z rises, the 5f orbitals contract and drop in energy (the actinide contraction), so the later elements behave like lanthanides. Nobelium is the clearest case: No²⁺ is \( 5f^{14} \), the analogue of Yb²⁺, but here +2 is the most stable state in water.

Two further analogues:

  • Bk⁴⁺ (\( 5f^7 \)) is the analogue of Tb⁴⁺ but, unlike Tb⁴⁺, it exists in aqueous solution; like Ce⁴⁺ it can be separated by oxidation.
  • Am³⁺ (\( 5f^6 \)) and Cm³⁺ (\( 5f^7 \)) resemble Eu³⁺ and Gd³⁺; Am(V) and Am(VI) need very strong oxidants.

Actinyl ions

In the +5 and +6 states U, Np, Pu and Am exist in water not as bare An⁵⁺/An⁶⁺ but as linear actinyl ions, \( [\text{O=An=O}]^{+} \) and \( [\text{O=An=O}]^{2+} \).

  • The O–An–O unit is linear, with short, strong multiple bonds that use 5f and 6d orbitals.
  • Other ligands (typically 4 to 6 donor atoms) bind in the equatorial plane, giving tetragonal, pentagonal or hexagonal bipyramids, for example \( [\text{UO}_2(\text{H}_2\text{O})_5]^{2+} \).
  • Uranyl, \( \text{UO}_2^{2+} \), is the most stable form of uranium in water and air. It is yellow (LMCT) and luminescent (Electronic Spectra).
  • The +5 actinyls (\( \text{AnO}_2^{+} \)) are prone to disproportionation, except neptunyl(V), \( \text{NpO}_2^{+} \), which is the stable state of neptunium.

Hydrolysis and complexing order

The strength of hydrolysis and of complex formation with hard ligands follows the effective charge on the metal, not the formal oxidation state:

$$\boxed{\text{An}^{4+} > \text{AnO}_2^{2+} > \text{An}^{3+} > \text{AnO}_2^{+}}$$

The two oxo ligands donate strongly to the metal, so the effective charge of \( \text{AnO}_2^{2+} \) is only a little above 3, and that of \( \text{AnO}_2^{+} \) only a little above 2. The order matters in Part C because it explains extraction and precipitation behaviour: An⁴⁺ hydrolyses and polymerises even in moderately acidic solution (plutonium(IV) “polymer”), while \( \text{AnO}_2^{+} \) is the weakest complexer.

Uranium in water

StateSpeciesBehaviour
+3U³⁺strong reductant; slowly reduces water, liberating H₂
+4U⁴⁺ (green)stable without air; slowly oxidised by air to U(VI)
+5\( \text{UO}_2^{+} \)disproportionates: \( 2\,\text{UO}_2^{+} + 4\,\text{H}^+ \rightarrow \text{U}^{4+} + \text{UO}_2^{2+} + 2\,\text{H}_2\text{O} \)
+6\( \text{UO}_2^{2+} \) (yellow)the stable state; forms nitrate, sulfate, carbonate complexes

Plutonium: four oxidation states at once

Formal potentials for plutonium in 1 M HClO₄ (V):

$$\text{PuO}_2^{2+} \xrightarrow{+0.916} \text{PuO}_2^{+} \xrightarrow{+1.170} \text{Pu}^{4+} \xrightarrow{+0.982} \text{Pu}^{3+}$$

All three couples lie within about 0.25 V of each other near +1 V. Consequences:

  1. Pu(III), Pu(IV), Pu(V) and Pu(VI) can coexist in the same acid solution in comparable amounts, a situation unique among the elements.
  2. Pu(V) disproportionates in acid: \( 2\,\text{PuO}_2^{+} + 4\,\text{H}^+ \rightarrow \text{Pu}^{4+} + \text{PuO}_2^{2+} + 2\,\text{H}_2\text{O} \), with \( E^\circ_{\text{cell}} = 1.170 - 0.916 = +0.254 \) V.
  3. Pu(IV) disproportionates at low acidity: \( 3\,\text{Pu}^{4+} + 2\,\text{H}_2\text{O} \rightleftharpoons 2\,\text{Pu}^{3+} + \text{PuO}_2^{2+} + 4\,\text{H}^+ \). The four protons released mean that lowering the acidity drives the equilibrium to the right.
  4. A modest reductant (Fe²⁺, hydroxylamine, U(IV)) converts Pu(IV) to Pu(III), which is the basis of the U/Pu split in solvent extraction (the hook).

Lanthanides vs Actinides: Redox Summary

PropertyLanthanidesActinides
Common state+3 almost always+3 to +7 for early members; +3 from Am
Highest state+4 (Ce, Pr, Tb)+7 (Np, Pu)
Oxo-cationsnone\( \text{AnO}_2^{+} \), \( \text{AnO}_2^{2+} \) for U–Am
+2 stateEu, Yb, Sm (others only non-aqueous)No (most stable), Md, Cf (less so)
f-orbital rolecore-like, little bonding5f participates in bonding for early members
Complexationmainly electrostatic, hard donorsmore covalent; can prefer soft donors slightly over Ln³⁺

The last line is used in reprocessing: ligands with soft N or S donors bind An³⁺ (Am³⁺, Cm³⁺) slightly more strongly than Ln³⁺ of the same size, which allows the difficult Am/Eu separation.

Memory Tricks

Don’t Confuse

ThisvsThat
Ce⁴⁺ stable in water (strong oxidant)Pr⁴⁺, Tb⁴⁺ only in solids
Eu²⁺: most stable Ln²⁺, mild reductantSm²⁺: least stable, strongest of the three
Formal oxidation state +6 for \( \text{UO}_2^{2+} \)effective charge only a little above 3
Most stable U state: +6 (uranyl)most stable Np: +5; Pu: +4; Am: +3
No²⁺ most stable state of nobeliumYb²⁺ a reductant, Yb³⁺ the stable state
Potentials of successive stepsare averaged by n, never added

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Which lanthanide has a stable +4 state in aqueous solution?
  2. What is the most stable oxidation state of uranium in aerated water, and in what form?
  3. Write the 4f configuration of Yb²⁺.
Answers
  1. Cerium (Ce⁴⁺, \( 4f^0 \)).
  2. +6, as the uranyl ion \( \text{UO}_2^{2+} \).
  3. \( 4f^{14} \).

Level 2: Part B Style

Practice Q1. The correct order of reducing strength of the divalent ions in water is:

(a) Eu²⁺ > Yb²⁺ > Sm²⁺ (b) Sm²⁺ > Yb²⁺ > Eu²⁺ (c) Yb²⁺ > Sm²⁺ > Eu²⁺ (d) Sm²⁺ > Eu²⁺ > Yb²⁺

Answer: (b)

\( E^\circ(\text{Ln}^{3+}/\text{Ln}^{2+}) \): Sm −1.55, Yb −1.05, Eu −0.35 V. The more negative the potential, the stronger the reductant. Eu²⁺ (\( f^7 \)) is the most stable divalent ion, so the weakest reductant.

Practice Q2. The tendency of actinide ions to hydrolyse decreases in the order:

(a) AnO₂²⁺ > An⁴⁺ > AnO₂⁺ > An³⁺ (b) An⁴⁺ > An³⁺ > AnO₂²⁺ > AnO₂⁺ (c) An⁴⁺ > AnO₂²⁺ > An³⁺ > AnO₂⁺ (d) AnO₂⁺ > An³⁺ > AnO₂²⁺ > An⁴⁺

Answer: (c)

Hydrolysis follows the effective charge at the metal: about 4 for An⁴⁺, a little above 3 for AnO₂²⁺, 3 for An³⁺, a little above 2 for AnO₂⁺. Option (a) uses the formal oxidation state.

Practice Q3. The actinides from americium onward show +3 as their most stable oxidation state because:

(a) their 6d orbitals become filled (b) their 5f orbitals contract and are stabilised, so 5f electrons are less available for bonding (c) relativistic effects disappear for heavy elements (d) their 7s electrons become inert

Answer: (b)

With rising nuclear charge the 5f orbitals contract and drop in energy, becoming core-like as 4f is in the lanthanides. Relativistic effects grow, not vanish, with Z, so (c) is wrong.

Practice Q4. Samarium(II) iodide in THF is used in organic synthesis mainly as:

(a) a two-electron oxidant (b) a one-electron reductant (c) a Lewis-acid catalyst only (d) a hydride donor

Answer: (b)

Sm²⁺ → Sm³⁺ + e⁻. It reduces ketones and aldehydes to ketyl radicals, which couple or add. It is not a hydride source.

Level 3: Part C Style

Practice Q5. Using the plutonium potentials in 1 M HClO₄ (PuO₂²⁺/PuO₂⁺ 0.916 V, PuO₂⁺/Pu⁴⁺ 1.170 V, Pu⁴⁺/Pu³⁺ 0.982 V), \( E^\circ \) for PuO₂²⁺/Pu³⁺ is:

(a) 3.068 V (b) 1.534 V (c) 1.023 V (d) 0.982 V

Answer: (c) 1.023 V

Three one-electron steps: \( nE \) values 0.916, 1.170 and 0.982 V, total 3.068 V for \( n = 3 \).

\( E^\circ = 3.068/3 = 1.023 \) V.

(a) adds potentials without dividing by n; (b) divides by 2.

Practice Q6. For \( 3\,\text{Pu}^{4+} + 2\,\text{H}_2\text{O} \rightleftharpoons 2\,\text{Pu}^{3+} + \text{PuO}_2^{2+} + 4\,\text{H}^+ \), use the data of Q5 (\( n = 2 \), 25 °C, \( 2.303RT/F = 0.05916 \) V). Which statements are correct?

  1. \( E^\circ_{\text{cell}} \approx -0.061 \) V.
  2. \( K \approx 9 \times 10^{-3} \) (concentrations in mol L⁻¹, including [H⁺]).
  3. At [H⁺] = 0.1 M, the ratio \( [\text{Pu}^{3+}]^2[\text{PuO}_2^{2+}]/[\text{Pu}^{4+}]^3 \) at equilibrium is about 87.
  4. Raising the acidity favours disproportionation.

(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only

The reaction is reduction Pu⁴⁺ → Pu³⁺ (0.982 V) combined with oxidation Pu⁴⁺ → PuO₂²⁺ (couple VI/IV, 1.043 V from the worked example).

  1. \( E^\circ_{\text{cell}} = 0.982 - 1.043 = -0.061 \) V. Correct.
  2. \( \log K = nE^\circ/0.05916 = 2(-0.061)/0.05916 = -2.06 \); \( K = 8.7 \times 10^{-3} \). Correct.
  3. \( K = \dfrac{[\text{Pu}^{3+}]^2[\text{PuO}_2^{2+}][\text{H}^+]^4}{[\text{Pu}^{4+}]^3} \), so the metal-ion ratio is \( K/[\text{H}^+]^4 = 8.7 \times 10^{-3}/10^{-4} = 87 \). Correct.
  4. Wrong. H⁺ is a product; higher acidity suppresses disproportionation. This is why Pu(IV) stock solutions are kept in strong acid.

Practice Q7. Which statements about f-block redox chemistry are correct?

  1. Ce(IV) sulfate solutions are thermodynamically able to oxidise water but are kinetically stable.
  2. The metallic radii of Eu and Yb are larger than those of their neighbours because the metals are effectively divalent.
  3. UO₂⁺ is the most stable uranium species in aerated water.
  4. Bk(IV) can be obtained in aqueous solution, unlike Tb(IV).

(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 4 only
  1. Correct. \( E^\circ(\text{Ce}^{4+}/\text{Ce}^{3+}) \) is above +1.23 V, but the oxidation of water is slow.
  2. Correct. Two conduction electrons per atom instead of three give weaker metallic bonding and larger radii.
  3. Wrong. UO₂⁺ disproportionates; the stable species is UO₂²⁺.
  4. Correct. Bk⁴⁺ (\( 5f^7 \)) has an aqueous chemistry, which is used to separate berkelium; Tb⁴⁺ does not.

Quick Revision Table

IdeaFact
Ln default+3; \( I_1 + I_2 + I_3 \) repaid by hydration/lattice energy
Ln(IV)Ce⁴⁺ in water (\( f^0 \)); Pr⁴⁺, Tb⁴⁺ only in solids
Ln(II)Eu²⁺ (\( f^7 \)) −0.35 V; Yb²⁺ (\( f^{14} \)) −1.05 V; Sm²⁺ −1.55 V
Ce(IV) potential1.44 (H₂SO₄), 1.61 (HNO₃), 1.70 V (HClO₄); CAN is 12-coordinate
MetalsE°(Ln³⁺/Ln) ≈ −2.3 V; Eu, Yb divalent in the metal (large radii)
SmI₂one-electron reductant; ketyls, pinacol, Barbier; HMPA boosts it
Most stable An statesTh 4, Pa 5, U 6, Np 5, Pu 4, Am–Lr 3, No 2
Actinylslinear O=An=O; equatorial ligands; UO₂²⁺ stable, UO₂⁺ disproportionates, NpO₂⁺ stable
Hydrolysis orderAn⁴⁺ > AnO₂²⁺ > An³⁺ > AnO₂⁺
Pu (1 M HClO₄)VI 0.916 V, V 1.170 V, IV 0.982 V, III: four states coexist
Latimer\( E^\circ_{\text{overall}} = \sum n_iE_i/\sum n_i \); right > left → disproportionation

Key Takeaways

What’s Next