Skip to content

Naming Rings: Alicyclic, Aromatic, Bicyclic, Spiro and Heterocyclic

CSIR NET organic chemistry: IUPAC names for cycloalkanes, benzene derivatives, fused arenes, von Baeyer bicyclics, spiro compounds and Hantzsch-Widman heterocycles.

  • 16 min read
  • Updated
On this page · 14 sections
  1. Prerequisites
  2. The Hook: Camphor’s Name
  3. Monocyclic Alicyclic Compounds
  4. Benzene and Its Derivatives
  5. Bicyclic Compounds: von Baeyer Nomenclature
  6. Spiro Compounds
  7. Heterocycles
  8. Memory Tricks
  9. Don’t Confuse
  10. Common Mistakes
  11. Practice
  12. Quick Revision Table
  13. Key Takeaways
  14. What’s Next

Prerequisites

The Hook: Camphor’s Name

Monocyclic Alicyclic Compounds

A saturated ring is named by adding cyclo to the alkane name: cyclopropane, cyclohexane. Unsaturated rings use -ene and -yne exactly as chains do.

Numbering a ring

The ring has no ends, so numbering starts at the atom that the hierarchy favours and runs in the direction that gives the lowest locants:

  1. The principal characteristic group (suffix) gets locant 1.
  2. Then the multiple bonds get the lowest locants. In a cycloalkene with no suffix, the double bond is C1=C2 and the “1” is often still written: cyclohex-1-ene is usually just “cyclohexene”.
  3. Then all prefixes together, then the prefix first in alphabetical order.
StructureNameWhy
methyl on the C=C carbon of cyclohexene1-methylcyclohex-1-eneC=C gets 1,2; methyl on C1
methyl on the CH₂ next to the C=C3-methylcyclohex-1-eneC=C first; then methyl 3 rather than 6
OH on the carbon next to the C=Ccyclohex-2-en-1-olsuffix gets 1, then the double bond 2
ketone with methyl on the adjacent carbon2-methylcyclohexan-1-onesuffix 1
cyclohexane bearing COOH, with C=O at the 3-position3-oxocyclohexane-1-carboxylic acidacid outranks ketone; -carboxylic acid style
1,2-dimethylcyclopentane, 1,3-dimethylcyclopentanepositional isomersring locants

Ring or chain?

When a molecule has both a ring and a chain, decide which is the parent:

  • The principal group decides first. If the suffix group is on the chain, the chain is the parent: C₆H₁₁CH₂OH is cyclohexylmethanol; C₆H₅CH₂CH₂OH is 2-phenylethan-1-ol.
  • If the principal group is on the ring, or there is none, the 2013 recommendations make the ring the parent: CH₃(CH₂)₅–C₃H₅ is hexylcyclopropane. Older practice often chose whichever of ring and chain had more carbon atoms, so some books print names such as “1-cyclopropylhexane”.

Carbon outside the ring

A functional group whose carbon is attached to a ring cannot be counted in the ring, so the “carbon-not-counted” suffixes apply:

StructureName
C₆H₁₁–COOHcyclohexanecarboxylic acid
C₆H₁₁–CHOcyclohexanecarbaldehyde
C₆H₁₁–CNcyclohexanecarbonitrile
C₆H₁₁–CONH₂cyclohexanecarboxamide
C₆H₁₁–COCH₃1-cyclohexylethan-1-one (the ketone carbon belongs to the ethanone chain)

Benzene and Its Derivatives

Retained names and substituent groups

NameStructureStatus
phenolC₆H₅OHretained, used in systematic names
anilineC₆H₅NH₂retained
benzoic acidC₆H₅COOHretained
benzaldehydeC₆H₅CHOretained
benzonitrileC₆H₅CNretained
tolueneC₆H₅CH₃traditional; systematic name methylbenzene
anisoleC₆H₅OCH₃traditional; methoxybenzene
styreneC₆H₅CH=CH₂traditional; ethenylbenzene
acetophenoneC₆H₅COCH₃traditional; 1-phenylethan-1-one
benzophenone(C₆H₅)₂COtraditional; diphenylmethanone
SubstituentStructureDo not confuse with
phenylC₆H₅–—
benzylC₆H₅CH₂–phenyl (no CH₂)
benzoylC₆H₅CO–benzyl (CH₂, not C=O)
phenylene–C₆H₄–1,2-, 1,3- or 1,4-phenylene
benzylideneC₆H₅CH=—

Disubstituted and polysubstituted benzenes

For two substituents, the positions 1,2-, 1,3- and 1,4- are also called ortho (o-), meta (m-) and para (p-). The prefixes are acceptable in general use, but locants are used in systematic names and are required for three or more substituents.

Numbering follows the same hierarchy as for any ring:

StructureNameRule
OH and NO₂ para4-nitrophenolphenol C–OH is C1
COOH with Br meta3-bromobenzoic acidsuffix C1
NH₂, Cl ortho, NO₂ para to NH₂2-chloro-4-nitroaniline{2,4} beats {4,6}
Br and Cl meta1-bromo-3-chlorobenzenetie {1,3}: first in alphabet gets 1
Br, Cl ortho to it, NO₂ para to Br1-bromo-2-chloro-4-nitrobenzenelowest set {1,2,4}, then alphabet
CH₃ with NO₂ at 2,4,6 (TNT)2-methyl-1,3,5-trinitrobenzeneall prefixes together: {1,2,3,5} beats {1,2,4,6}

Fused polycyclic arenes

Fused ring systems have retained names and fixed numbering that does not change with substituents:

AreneNumbering to remember
naphthaleneC1–C8 round the outside, fusion atoms 4a and 8a; positions 1, 4, 5, 8 are α, positions 2, 3, 6, 7 are β
anthracenelinear, three rings; the central CH positions are 9 and 10
phenanthreneangular, three rings; the central-ring CH positions are 9 and 10

So 1-naphthol is naphthalen-1-ol (the α-naphthol) and 2-naphthol is naphthalen-2-ol. Fusion atoms take a letter after the preceding number (4a, 8a) and carry no hydrogen.

Bicyclic Compounds: von Baeyer Nomenclature

When two rings share two or more atoms, the compound is a bridged bicyclic. The two shared atoms are the bridgeheads; the three paths between them are the bridges.

von Baeyer name
bicyclo[x.y.z]alkane, where x ≥ y ≥ z are the numbers of atoms in the three bridges (bridgeheads excluded), written in decreasing order and separated by full stops. The alkane name counts all skeletal atoms: total = x + y + z + 2.
NameBridgesTotal CCommon name
bicyclo[1.1.0]butane1, 1, 04—
bicyclo[1.1.1]pentane1, 1, 15—
bicyclo[2.2.1]heptane2, 2, 17norbornane
bicyclo[2.2.2]octane2, 2, 28—
bicyclo[3.2.1]octane3, 2, 18—
bicyclo[4.4.0]decane4, 4, 010decalin (also named decahydronaphthalene)

A zero bridge means the bridgeheads are bonded directly: the rings are fused, not bridged.

Numbering a bicyclic

  1. Start at one main bridgehead (C1).
  2. Number round the largest bridge to the second bridgehead.
  3. Continue round the next largest bridge back towards C1.
  4. Number the smallest bridge last, starting from the atom nearer to C1.
  5. Among the choices left (which bridgehead, which direction), give the lowest locants to the principal group, then multiple bonds, then prefixes.
graph LR
    C1((C1 bridgehead)) --> C2((C2)) --> C3((C3)) --> C4((C4)) --> C5((C5 bridgehead))
    C5 --> C6((C6)) --> C7((C7)) --> C1
    C1 --> C8((C8)) --> C5

The diagram is bicyclo[3.2.1]octane: C2–C4 form the three-atom bridge, C6–C7 the two-atom bridge, and C8 the one-atom bridge.

Worked examples

NameReading it
bicyclo[2.2.1]hept-2-ene (norbornene)double bond C2=C3, on a two-carbon bridge
1,7,7-trimethylbicyclo[2.2.1]heptan-2-one (camphor)methyl on bridgehead C1, two methyls on the one-carbon bridge C7, ketone at C2
7-oxabicyclo[2.2.1]heptaneoxygen replaces C7 (replacement prefix “oxa”)
1-azabicyclo[2.2.2]octane (quinuclidine)nitrogen at a bridgehead

Spiro Compounds

Two rings sharing exactly one atom (the spiro atom) form a spiro compound.

Spiro name (two carbocyclic rings)
spiro[x.y]alkane, where x and y are the numbers of atoms in each ring excluding the spiro atom, cited in increasing order. Total skeletal atoms = x + y + 1.

Numbering starts in the smaller ring at an atom next to the spiro atom, goes round the smaller ring, through the spiro atom, and then round the larger ring.

NameRingsSpiro atom locant
spiro[2.2]pentane3 + 33
spiro[2.5]octane3 + 63
spiro[4.4]nonane5 + 55
spiro[4.5]decane5 + 65
spiro[5.5]undecane6 + 66

In spiro[4.5]decane, C1–C4 are in the five-membered ring, C5 is the spiro atom and C6–C10 are in the six-membered ring. A ketone on the six-membered ring next to the spiro atom is spiro[4.5]decan-6-one.

Heterocycles

Retained names

Most common heterocycles have retained names with fixed numbering. The heteroatom gets locant 1 unless the name dictates otherwise.

Ring sizeRetained nameHeteroatom positions
5, aromaticfuran, thiophene, 1H-pyrroleO, S or N at 1
5, aromatic, two heteroatoms1H-imidazole (N1, N3), 1H-pyrazole (N1, N2)1,3 or 1,2
5, aromatic, O or S plus N1,3-oxazole, 1,3-thiazole; 1,2-oxazole (isoxazole), 1,2-thiazole (isothiazole)O or S at 1
6, aromaticpyridineN1; C2, C3, C4 are α, β, γ
6, aromatic, two Npyridazine (1,2), pyrimidine (1,3), pyrazine (1,4)—
6, saturatedpiperidine, piperazine, morpholine (O1, N4)—
5, saturatedpyrrolidineN1
fused1H-indole (N1), quinoline (N1), isoquinoline (N2)fixed

The H with a number (1H-pyrrole, 2H-pyran, 4H-pyran) is indicated hydrogen: it says which ring atom carries the “extra” hydrogen in a ring that would otherwise need the maximum number of non-cumulative double bonds. It takes the lowest locant first, ahead of even the principal group.

Hantzsch–Widman names

For rings of 3 to 10 atoms without a retained name, the Hantzsch–Widman system combines a heteroatom prefix with a stem that encodes ring size and saturation.

Prefixes, cited and numbered in this order of seniority: O (oxa) > S (thia) > Se (selena) > Te (tellura) > N (aza) > P (phospha) > As (arsa) > … > Si (sila) > … > B (bora). The final “a” is dropped before a vowel (oxa + irane = oxirane).

Stems (unsaturated = maximum number of non-cumulative double bonds):

Ring sizeUnsaturatedSaturated, contains NSaturated, no N
3-irine (N), -irene (no N)-iridine-irane
4-ete-etidine-etane
5-ole-olidine-olane
6 (O, S)-ine—-ane
6 (N)-ine-inane—
7-epine-epane-epane
8-ocine-ocane-ocane

The 6-membered stems depend on the last-cited heteroatom: oxygen and sulfur rings take “-ine/-ane”, nitrogen rings take “-ine/-inane”, and a group including boron and phosphorus takes “-inine/-inane”.

Hantzsch–Widman nameStructureCommon name
oxirane3-ring, one O, saturatedethylene oxide
aziridine3-ring, one N, saturated—
thiirane3-ring, one S, saturatedethylene sulfide
oxetane4-ring, one O—
azetidine4-ring, one N, saturated—
oxolane5-ring, one O, saturatedtetrahydrofuran (THF)
thiolane5-ring, one S, saturatedtetrahydrothiophene
1,3-dioxolane5-ring, O at 1 and 3, saturated—
1,3-thiazolidine5-ring, S1, N3, saturatedthe ring in penicillins
oxane6-ring, one O, saturatedtetrahydropyran
1,4-dioxane6-ring, O at 1 and 4dioxane
1,3,5-triazine6-ring, N at 1, 3, 5, aromatic—
azepane7-ring, one N, saturatedhexamethyleneimine

Numbering heterocycles

  1. The senior heteroatom (O before S before N) gets locant 1.
  2. The other heteroatoms, taken together, get the lowest locants.
  3. Then indicated hydrogen, then the principal group, then multiple bonds and prefixes, as usual.

1,3-Thiazole has S1 and N3; 1,3-oxazole has O1 and N3; morpholine, by Hantzsch–Widman 1,4-oxazinane, has O1 and N4.

Memory Tricks

Don’t Confuse

ThisvsThat
benzyl, C₆H₅CH₂–benzoyl, C₆H₅CO–
cyclohexanecarboxylic acid (COOH on ring)cyclohexylacetic acid (CH₂COOH on ring)
bicyclo[4.4.0]decane (fused, zero bridge)spiro[4.5]decane (one shared atom)
oxolane (THF, saturated)furan (aromatic)
1,3-oxazole (O1, N3)1,2-oxazole (isoxazole, O1, N2)
quinoline, N at 1isoquinoline, N at 2
pyrimidine (1,3-diazine)pyrazine (1,4) and pyridazine (1,2)
1H- indicated hydrogen (where the extra H sits)N- substituent locant (what is attached to nitrogen)

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not taken from any CSIR NET paper.

Level 1: Foundation

  1. How many carbon atoms are in bicyclo[3.3.1]nonane, and how many in spiro[3.4]octane?
  2. Give the Hantzsch–Widman name of a saturated four-membered ring with one oxygen.
  3. Which positions of naphthalene are α?
Answers
  1. 3 + 3 + 1 + 2 = 9; 3 + 4 + 1 = 8. Both match the alkane stems.
  2. Oxetane.
  3. 1, 4, 5 and 8, the positions next to the fusion atoms.

Level 2: Part B Style

Practice Q1. The IUPAC name of the compound with a cyclohexene ring, an –OH on one ring carbon and the C=C between the next two carbons is:

(a) cyclohex-1-en-3-ol (b) cyclohex-2-en-1-ol (c) 3-hydroxycyclohexene (d) cyclohex-3-en-1-ol

Answer: (b)

The –OH is the principal group, so its carbon is C1. Numbering towards the double bond puts it at C2=C3: cyclohex-2-en-1-ol. (a) numbers for the double bond first; (c) makes the suffix group a prefix; (d) describes a different isomer, with the C=C one carbon further away.

Practice Q2. Bicyclo[2.2.2]oct-2-ene has:

(a) 8 carbons and the double bond on a two-carbon bridge (b) 6 carbons and the double bond at a bridgehead (c) 8 carbons and the double bond on the one-carbon bridge (d) 10 carbons

Answer: (a)

2 + 2 + 2 + 2 = 8 carbons. All three bridges have two carbons; C2=C3 is on the first one numbered. (c) is impossible because there is no one-carbon bridge.

Practice Q3. The correct name of C₆H₅–CO–CH₂CH₃ is:

(a) 1-phenylpropan-1-one (b) benzyl ethyl ketone (c) 1-benzoylethane (d) 3-phenylpropan-1-one

Answer: (a)

The ketone is the principal group and must be in the parent chain. The chain C(=O)–CH₂–CH₃ has three carbons, with the carbonyl at C1 and phenyl on C1: 1-phenylpropan-1-one (propiophenone). (b) uses “benzyl”, which would need a CH₂ between ring and C=O. (c) makes the principal group a prefix. (d) is not a valid ketone name; the skeleton it suggests, PhCH₂CH₂CHO, is the aldehyde 3-phenylpropanal.

Practice Q4. Which name corresponds to a five-membered saturated ring containing sulfur at position 1 and nitrogen at position 3?

(a) 1,3-thiazole (b) 1,3-thiazolidine (c) 1,3-thiazinane (d) 3,1-azathiolane

Answer: (b)

Five-membered, saturated, containing nitrogen: stem -olidine. Prefixes thia (S, senior) and aza, elided to “thiaz”: 1,3-thiazolidine. (a) is the aromatic ring; (c) is a six-membered ring; (d) numbers nitrogen first.

Level 3: Part C Style

Practice Q5. A bicyclic ketone C₁₀H₁₆O is named 4,7,7-trimethylbicyclo[4.1.0]heptan-3-one. Consider the statements:

  1. The skeleton contains a cyclopropane ring fused to a six-membered ring.
  2. The gem-dimethyl group sits on the one-carbon bridge.
  3. The carbonyl carbon is directly bonded to a bridgehead.
  4. The formula C₁₀H₁₆O has four degrees of unsaturation.

Which are correct?

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2 and 4 only (d) 1, 2 and 4

Answer: (a) 1 and 2 only

Bicyclo[4.1.0]heptane: bridges of 4, 1 and 0 atoms; 4 + 1 + 0 + 2 = 7 carbons. The zero bridge means C1 and C6 are bonded, so the rings are a six-membered ring (C1–C6) and a three-membered ring (C1, C6, C7).

  1. Correct. Six-membered ring fused to cyclopropane.
  2. Correct. C7 is the one-carbon bridge, carrying both methyls.
  3. Wrong. Numbering runs C1 (bridgehead), C2, C3, C4, C5, C6 (bridgehead). C3 is bonded to C2 and C4, neither of which is a bridgehead.
  4. Wrong. DBE = 10 − 16/2 + 1 = 3: two rings and one C=O. Check the name against the formula: bicyclo[4.1.0]heptan-3-one is C₇H₁₀O, and three methyls add C₃H₆.

Practice Q6. A disubstituted naphthalene carries one –OH and one –COOH on adjacent carbons of the same ring, with the –COOH on an α carbon and the –OH on a β carbon. It shows a carboxylic acid IR band. Its name and the number of α positions in naphthalene are:

(a) 2-hydroxynaphthalene-1-carboxylic acid; 4 (b) 1-carboxynaphthalen-2-ol; 4 (c) 2-hydroxynaphthalene-1-carboxylic acid; 2 (d) 1-hydroxynaphthalene-2-carboxylic acid; 4

Answer: (a)

The acid is the principal group, so it is the suffix (-carboxylic acid, its carbon outside the ring system) and –OH is a hydroxy prefix. The suffix gets the lowest locant, so the α carbon bearing –COOH is C1 (all four α positions are equivalent by symmetry), and the adjacent β carbon bearing –OH is C2: 2-hydroxynaphthalene-1-carboxylic acid.

Naphthalene has four α positions (1, 4, 5, 8). (b) makes the senior group a prefix. (c) miscounts the α positions. (d) puts the acid on the β carbon and the –OH on the α carbon, a different compound.

Practice Q7. How many distinct ¹³C NMR signals do naphthalene, anthracene and spiro[4.4]nonane each show (assume fast conformational averaging)?

(a) 3, 4, 3 (b) 3, 4, 4 (c) 5, 7, 3 (d) 2, 3, 2

Answer: (a)
  • Naphthalene (D₂h): C1-type (four α), C2-type (four β), C4a-type (two fusion) = 3.
  • Anthracene (D₂h): C1-type (4), C2-type (4), C9-type (2), C4a-type (4 fusion) = 4.
  • Spiro[4.4]nonane: the spiro carbon (1), the four carbons next to it (C1, C4, C6, C9), and the four remote carbons (C2, C3, C7, C8) = 3.

Quick Revision Table

TopicRule
Ring numberingsuffix 1 → multiple bonds → all prefixes → alphabet
Ring vs chainsuffix on chain: chain parent (cyclohexylmethanol); otherwise ring (2013)
Carbon outside ring-carboxylic acid, -carbaldehyde, -carbonitrile, -carboxamide
Benzeneo/m/p only for two substituents; locants otherwise; TNT = 2-methyl-1,3,5-trinitrobenzene
Fused arenesnaphthalene α = 1,4,5,8; anthracene and phenanthrene: 9,10 in the middle
Bicyclo[x.y.z]x ≥ y ≥ z, total = x + y + z + 2; number head → largest bridge → next → smallest
Spiro[x.y]x ≤ y, total = x + y + 1; number from smaller ring, spiro atom = x + 1
Replacement prefixesoxa, thia, aza in bicyclic, spiro and long hetero-chains
HW prefix orderO > S > Se > Te > N > P > As > … > Si > … > B
HW stems3: irine/irene, iridine/irane; 4: ete, etidine/etane; 5: ole, olidine/olane; 6: ine, inane (N)/ane (O,S)
Retained heterocyclespyrrole, furan, thiophene, pyridine, imidazole, pyrazole, indole, quinoline (N1), isoquinoline (N2)

Key Takeaways

What’s Next