Skip to content

s-Block and Group 13 Compounds: Hydrides, Oxides, Boranes and Borazine

CSIR NET chemistry: alkali and alkaline earth oxides and hydrides, boron halides, diborane, Wade's rules, styx codes, borazine, boron nitride and boric acid.

  • 20 min read
  • Updated
On this page · 15 sections
  1. Prerequisites
  2. The Hook: A Molecule With Too Few Electrons
  3. Group 1 and Group 2 Compounds
  4. Group 13 Halides: Lewis Acids and Bridges
  5. Diborane
  6. Higher Boranes: Wade’s Rules and styx Codes
  7. Borazine and Boron Nitride
  8. Boric Acid and Borates
  9. Memory Tricks
  10. Don’t Confuse
  11. Common Mistakes
  12. Practice
  13. Quick Revision Table
  14. Key Takeaways
  15. What’s Next

Prerequisites

The Hook: A Molecule With Too Few Electrons

Group 1 and Group 2 Compounds

Oxides, peroxides and superoxides

Burn the alkali metals in excess air or oxygen and the main product changes down the group:

MetalMain productAnionO–O bond orderMagnetism
LiLi₂O (oxide)O²⁻(no O–O bond)diamagnetic
NaNa₂O₂ (peroxide)O₂²⁻1diamagnetic
K, Rb, CsMO₂ (superoxide)O₂⁻1.5paramagnetic (one unpaired electron)

The MO configurations explain the bond orders: O₂ has two electrons in π*, O₂⁻ three and O₂²⁻ four. O–O distances lengthen accordingly, from about 121 pm (O₂) to about 133 pm (O₂⁻) to about 149 pm (O₂²⁻). Superoxides are coloured (KO₂ is yellow-orange) because of the unpaired electron; peroxides of the alkali metals are colourless or pale yellow.

Why the larger cations stabilise the larger anions: the lattice energy of a salt depends on the sum of the ionic radii. A small cation (Li⁺) gains much more lattice energy from the small O²⁻ than from O₂⁻; a large cation (Cs⁺) gains little from shrinking the anion, so the less decomposed superoxide survives. The same argument explains why the thermal stability of carbonates, peroxides and nitrates increases down groups 1 and 2, and why Li₂CO₃ decomposes to Li₂O on heating whereas Na₂CO₃ does not.

Superoxide in a breathing apparatus

Potassium superoxide removes CO₂ and releases O₂:

$$4\text{KO}_2 + 2\text{CO}_2 \rightarrow 2\text{K}_2\text{CO}_3 + 3\text{O}_2$$

With water it gives KOH, O₂ and H₂O₂. Group 2 gives peroxides such as BaO₂ (once used to make hydrogen peroxide, \( \text{BaO}_2 + \text{H}_2\text{SO}_4 \rightarrow \text{BaSO}_4 + \text{H}_2\text{O}_2 \)).

Lithium is also the only alkali metal that combines directly with N₂ at room temperature (giving Li₃N), as magnesium does on heating (Mg₃N₂): one face of the Li–Mg diagonal relationship.

Alkali metals in liquid ammonia

Alkali metals dissolve in liquid ammonia without reaction to give blue, paramagnetic, electrically conducting solutions containing solvated cations and solvated electrons:

$$\text{M} + (x + y)\,\text{NH}_3 \rightarrow [\text{M}(\text{NH}_3)_x]^+ + [e(\text{NH}_3)_y]^-$$
  • The colour is the same for every alkali metal: it belongs to the solvated electron, which absorbs broadly at the red and near-infrared end of the spectrum.
  • On concentration the solution becomes bronze and metallic, and the paramagnetism per metal atom falls as electrons pair up.
  • The solutions are metastable: slowly, and quickly with a transition-metal catalyst such as iron, they give the amide and hydrogen: \( 2\text{Na} + 2\text{NH}_3 \rightarrow 2\text{NaNH}_2 + \text{H}_2 \).
  • They are powerful reducing agents (the Birch reduction of aromatic rings uses Li or Na in NH₃).

With a cryptand or crown ether to encapsulate the cation, solids containing the alkalide anion Na⁻ ([Na(2.2.2-crypt)]⁺Na⁻) and electrides (with the electron itself as the anion) have been crystallised.

Hydrides

TypeExamplesBonding and behaviour
Saline (ionic)LiH, NaH, CaH₂contain H⁻; react with water to give H₂; electrolysis of molten LiH gives H₂ at the anode
Polymeric, electron-deficientBeH₂, (AlH₃)ₙbridging hydrogens with three-centre bonds
Complex hydridesLiAlH₄, NaBH₄tetrahedral [AlH₄]⁻, [BH₄]⁻; hydride transfer reagents

Syntheses to remember:

$$4\text{LiH} + \text{AlCl}_3 \xrightarrow{\text{ether}} \text{LiAlH}_4 + 3\text{LiCl}$$

$$4\text{NaH} + \text{B(OCH}_3)_3 \rightarrow \text{NaBH}_4 + 3\text{NaOCH}_3$$

LiAlH₄ reacts violently with water; NaBH₄ is stable enough to be used in water or alcohol at high pH, which makes it the milder, more selective reagent.

Beryllium: the covalent member of group 2

  • BeCl₂ is a linear monomer in the vapour at high temperature, a chlorine-bridged dimer at lower vapour temperatures, and in the solid a polymeric chain of edge-sharing BeCl₄ tetrahedra, each Cl bridging two Be atoms. Be is two-coordinate in the monomer and reaches four-coordination in the solid.
  • Be(OH)₂ is amphoteric, like Al(OH)₃ (diagonal relationship).
  • Beryllium compounds are covalent because Be²⁺ is tiny and highly polarising.
Property down the group (Be → Ba)Trend
Solubility of sulfatesdecreases (BaSO₄ insoluble)
Solubility of hydroxidesincreases (Ba(OH)₂ fairly soluble)
Thermal stability of carbonatesincreases
Basic character of oxidesincreases (BeO amphoteric)

Both solubility trends come from the balance of lattice energy and hydration energy: for a large anion (SO₄²⁻) the lattice energy changes little with the cation while the hydration energy falls steeply down the group; for a small anion (OH⁻) the lattice energy falls faster.

Group 13 Halides: Lewis Acids and Bridges

Boron trihalides

BX₃ molecules are trigonal planar (\( D_{3h} \)) monomers with a vacant boron 2p orbital, so they are Lewis acids. The experimental order towards a strong base such as NH₃ or pyridine is

$$\boxed{\text{BF}_3 < \text{BCl}_3 < \text{BBr}_3 < \text{BI}_3}$$

the reverse of what electronegativity alone predicts. The textbook explanation is π back-donation from filled halogen p orbitals into the empty boron 2p orbital, strongest for fluorine whose 2p orbitals match boron’s in size. Forming an adduct pyramidalises the boron and destroys that π bonding, so BF₃ pays the largest reorganisation cost. The B–F bond (about 130 pm) is shorter than the sum of the single-bond covalent radii, consistent with partial double-bond character.

Synthesis and uses: \( \text{B}_2\text{O}_3 + 3\text{CaF}_2 + 3\text{H}_2\text{SO}_4 \rightarrow 2\text{BF}_3 + 3\text{CaSO}_4 + 3\text{H}_2\text{O} \); BF₃ is used as a Friedel–Crafts and polymerisation catalyst, usually as its ether adduct BF₃·OEt₂. With F⁻ it forms tetrahedral BF₄⁻. BCl₃ hydrolyses rapidly to boric acid and HCl; BF₃ hydrolyses only partly, giving HBF₄ and boric acid.

Aluminium halides

CompoundSolidMelt or vapour near the melting pointHigh-temperature vapour
AlF₃3D ionic network (Al six-coordinate)
AlCl₃layer lattice, Al six-coordinateAl₂Cl₆ dimerAlCl₃ monomer (trigonal planar)
AlBr₃, AlI₃Al₂X₆ dimersAl₂X₆monomer

In Al₂Cl₆ each Al is roughly tetrahedral; two Cl atoms bridge. The bridges are electron-precise: each bridging Cl uses one of its lone pairs to make an ordinary two-centre bond to the second Al. Bridging Al–Cl bonds (about 221 pm) are longer than terminal ones (about 206 pm).

The inert pair in group 13

The +1 state becomes more stable down the group. TlCl is a stable salt; Tl(III) compounds are oxidising. “TlI₃” is not thallium(III) iodide but Tl⁺I₃⁻ (thallium(I) triiodide), because I⁻ is too strong a reductant to coexist with Tl³⁺. Similarly “GaCl₂” is the mixed-valence salt Ga⁺[GaCl₄]⁻, not a Ga(II) compound.

Diborane

Synthesis

$$4\text{BF}_3 + 3\text{LiAlH}_4 \xrightarrow{\text{ether}} 2\text{B}_2\text{H}_6 + 3\text{LiF} + 3\text{AlF}_3$$

$$3\text{NaBH}_4 + 4\text{BF}_3 \xrightarrow{\text{diglyme}} 2\text{B}_2\text{H}_6 + 3\text{NaBF}_4$$

$$2\text{NaBH}_4 + \text{I}_2 \xrightarrow{\text{diglyme}} \text{B}_2\text{H}_6 + 2\text{NaI} + \text{H}_2$$

Structure and bonding

  • Two BH₂ units lie in one plane; two bridging H atoms lie above and below that plane. Point group \( D_{2h} \).
  • Each B is roughly tetrahedral (sp³-like).
  • Terminal B–H about 119 pm; bridging B–H about 133 pm; B···B about 177 pm.
  • Bonding: four ordinary 2c–2e terminal B–H bonds use 8 electrons; the remaining 4 electrons form two 3c–2e B–H–B bonds. In each, an sp³-like orbital from each boron overlaps the H 1s orbital to give one bonding, one non-bonding and one antibonding three-centre MO; only the bonding MO is occupied.
  • The ¹H NMR spectrum shows two kinds of hydrogen, terminal and bridging, in the ratio 4 : 2.

Reactions

ReagentProductNote
H₂O\( \text{B}_2\text{H}_6 + 6\text{H}_2\text{O} \rightarrow 2\text{B(OH)}_3 + 6\text{H}_2 \)rapid hydrolysis
O₂B₂O₃ + H₂Oburns with a large heat release
Large Lewis bases (Me₃N, THF, Me₂S, CO, PR₃)symmetric cleavage: 2 L·BH₃each B keeps its share of hydrogens
NH₃ (small base), low temperatureasymmetric cleavage: [H₂B(NH₃)₂]⁺[BH₄]⁻both bridging H go to one boron
NH₃, heatborazine, B₃N₃H₆\( 3\text{B}_2\text{H}_6 + 6\text{NH}_3 \rightarrow 2\text{B}_3\text{N}_3\text{H}_6 + 12\text{H}_2 \)
Alkenestrialkylboranes (hydroboration, anti-Markovnikov, syn addition)
HClB₂H₅Cl + H₂substitutes a terminal H
Heathigher boranes (B₄H₁₀, B₅H₉, B₅H₁₁, B₁₀H₁₄, …)pyrolysis

Higher Boranes: Wade’s Rules and styx Codes

Classification by formula

ClassFormulaSkeletal electron pairs (SEP)Shape
closo\( [\text{B}_n\text{H}_n]^{2-} \)\( n + 1 \)closed deltahedron with \( n \) vertices
nido\( \text{B}_n\text{H}_{n+4} \)\( n + 2 \)deltahedron of \( n + 1 \) vertices, one vertex missing
arachno\( \text{B}_n\text{H}_{n+6} \)\( n + 3 \)\( n + 2 \) vertices, two missing
hypho\( \text{B}_n\text{H}_{n+8} \)\( n + 4 \)\( n + 3 \) vertices, three missing

Counting skeletal electrons (Wade’s rules)

  1. Each B–H unit contributes 2 electrons to the skeleton (B has 3 valence electrons; one is used in the terminal B–H bond; H’s electron is in that bond too).
  2. Each additional H (bridging or extra terminal) contributes 1.
  3. Each negative charge contributes 1.
  4. Heteroatom units: a C–H unit contributes 3.
  5. Divide by 2 to get SEP and compare with \( n \).
BoraneSEPTypeShape
[B₆H₆]²⁻7 = n + 1closooctahedron
[B₁₂H₁₂]²⁻13 = n + 1closoicosahedron (very stable)
B₅H₉7 = n + 2nidosquare pyramid
B₁₀H₁₄12 = n + 2nidoopen basket: an 11-vertex closo deltahedron minus one vertex (often drawn as an icosahedral fragment)
B₄H₁₀7 = n + 3arachnobutterfly (octahedron minus two vertices)
B₅H₁₁8 = n + 3arachnopentagonal bipyramid minus two vertices
C₂B₁₀H₁₂13 = n + 1closoicosahedral carborane (1,2-, 1,7- and 1,12-isomers)

Wade’s rules are developed fully, with metal clusters and the isolobal analogy, in the Cages and Metal Clusters unit of the syllabus. For this unit you need the borane counting above.

Lipscomb’s styx code

Each borane \( \text{B}_p\text{H}_{p+q} \) is described by four numbers:

  • s = number of B–H–B (3c–2e) bridges
  • t = number of BBB (3c–2e) bonds
  • y = number of B–B (2c–2e) bonds
  • x = number of extra terminal H, that is BH₂ groups

Every boron also carries one ordinary terminal B–H. The equations of balance are

$$\boxed{s + x = q, \qquad s + t = p, \qquad t + y = p - \frac{q}{2}}$$
Boranep, qstyx
B₂H₆2, 42002
B₄H₁₀4, 64012
B₅H₉5, 44120
B₅H₁₁5, 63203
B₁₀H₁₄10, 44620

Check B₄H₁₀ (4012): \( s + x = 4 + 2 = 6 = q \); \( s + t = 4 + 0 = 4 = p \); \( t + y = 0 + 1 = 1 = 4 - 3 \). The equations alone do not always give a unique answer; the structure chooses among the solutions.

Carboranes

Replacing a BH⁻ unit by an isoelectronic CH unit removes one negative charge: [B₁₂H₁₂]²⁻ → [CB₁₁H₁₂]⁻ → C₂B₁₀H₁₂. The neutral icosahedral dicarba-closo-dodecaboranes exist as 1,2- (ortho), 1,7- (meta) and 1,12- (para) isomers; heating converts the 1,2-isomer to 1,7 and, at higher temperature, to 1,12. Removing one boron vertex from 1,2-C₂B₁₀H₁₂ with alkoxide base gives the nido anion [C₂B₉H₁₂]⁻; deprotonating that (for example with NaH) gives the dianion [C₂B₉H₁₁]²⁻ (dicarbollide), whose open C₂B₃ face binds metals like cyclopentadienide.

Borazine and Boron Nitride

Borazine, B₃N₃H₆

Synthesis:

$$3\text{NH}_4\text{Cl} + 3\text{BCl}_3 \xrightarrow{\text{heat}} \text{B}_3\text{N}_3\text{H}_3\text{Cl}_3 + 9\text{HCl}$$

$$2\text{B}_3\text{N}_3\text{H}_3\text{Cl}_3 + 6\text{NaBH}_4 \rightarrow 2\text{B}_3\text{N}_3\text{H}_6 + 6\text{NaCl} + 3\text{B}_2\text{H}_6$$

or directly from diborane and ammonia (above). The chloro-intermediate is B-trichloroborazine: Cl on boron.

Structure: planar six-membered ring of alternating B and N, point group \( D_{3h} \), all B–N bonds equal (about 144 pm, between single and double). It is isoelectronic with benzene, hence “inorganic benzene”.

Why it is less aromatic and more reactive than benzene: the N lone pairs are delocalised only partly, because N is more electronegative than B; the ring is polar (N partly negative, B partly positive). Borazine therefore adds polar reagents across the B–N bonds instead of substituting:

$$\text{B}_3\text{N}_3\text{H}_6 + 3\text{HCl} \rightarrow \text{B}_3\text{N}_3\text{H}_9\text{Cl}_3$$

The electronegative part (Cl, OH, OR) goes to boron; H goes to nitrogen. It is hydrolysed by water on warming to boric acid, ammonia and hydrogen (\( \text{B}_3\text{N}_3\text{H}_6 + 9\text{H}_2\text{O} \rightarrow 3\text{B(OH)}_3 + 3\text{NH}_3 + 3\text{H}_2 \)).

Boron nitride

FormStructureProperties
Hexagonal h-BNgraphite-like layers of B₃N₃ hexagons; in adjacent layers B sits over Nwhite, slippery solid lubricant, electrical insulator (wide band gap), very stable to heat and oxidation
Cubic c-BNzinc blende (diamond-like)made from h-BN at high pressure and temperature; nearly as hard as diamond and more resistant to oxidation; abrasive for steels
Wurtzite w-BNhexagonal analogue of lonsdaleitehigh-pressure form

h-BN is made by heating B₂O₃ (or boric acid) with NH₃ or urea at high temperature: \( \text{B}_2\text{O}_3 + 2\text{NH}_3 \rightarrow 2\text{BN} + 3\text{H}_2\text{O} \). It is “white graphite” in looks and lubrication, but not in conductivity: the polar B–N bond localises the π electrons on nitrogen.

Boric Acid and Borates

  • B(OH)₃ forms layers of planar B(OH)₃ units joined by hydrogen bonds, which makes the crystals flaky.
  • It is a weak monobasic Lewis acid, not a Brønsted proton donor: \( \text{B(OH)}_3 + 2\text{H}_2\text{O} \rightleftharpoons [\text{B(OH)}_4]^- + \text{H}_3\text{O}^+ \), pKa about 9.2.
  • Cis-diols (glycerol, mannitol) form stable chelate complexes with [B(OH)₄]⁻, pulling the equilibrium to the right; the acid then becomes strong enough to titrate with NaOH using phenolphthalein.
  • Heating: B(OH)₃ → HBO₂ (metaboric acid) → B₂O₃ (glassy).
  • Borax is Na₂[B₄O₅(OH)₄]·8H₂O. The tetraborate anion contains two BO₃ triangles and two BO₄ tetrahedra. In water it acts as a buffer (it gives equal amounts of B(OH)₃ and [B(OH)₄]⁻) and is a primary standard for acid titrations. On fusion it gives a glass that dissolves metal oxides with characteristic colours (borax bead test).

Memory Tricks

Don’t Confuse

ThisvsThat
Al₂Cl₆ bridges: 2c–2e (Cl lone pairs)B₂H₆ and Al₂Me₆ bridges: 3c–2e
Symmetric cleavage (big bases): 2 L·BH₃asymmetric cleavage (NH₃): [H₂B(NH₃)₂]⁺[BH₄]⁻
Superoxide O₂⁻: bond order 1.5, paramagneticperoxide O₂²⁻: bond order 1, diamagnetic
h-BN: insulator, B over Ngraphite: conductor, staggered layers
Borazine adds HClbenzene substitutes
B(OH)₃: Lewis acid, OH⁻ acceptorH₃PO₃ and other oxoacids: Brønsted acids
TlI₃ = Tl⁺ I₃⁻ (thallium(I) triiodide)AlI₃: a genuine aluminium(III) iodide (covalent Al₂I₆ dimer)
nido B₅H₉: square pyramidcloso [B₅H₅]²⁻: trigonal bipyramid

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. What product forms when potassium burns in excess oxygen? Is it paramagnetic?
  2. What is the styx code of diborane?
  3. Which boron trihalide is the weakest Lewis acid?
Answers
  1. KO₂, potassium superoxide; paramagnetic (O₂⁻ has one unpaired electron, bond order 1.5).
  2. 2002: two B–H–B bridges, no BBB or B–B bonds, two BH₂ groups.
  3. BF₃, because of strong B–F π back-donation.

Level 2: Part B Style

Practice Q1. Using Wade’s rules, the structural types of B₄H₁₀, B₁₀H₁₄ and [B₁₂H₁₂]²⁻ are respectively:

(a) arachno, nido, closo (b) nido, arachno, closo (c) arachno, closo, nido (d) nido, nido, closo

Answer: (a)
  • B₄H₁₀ = \( \text{B}_n\text{H}_{n+6} \): \( 4 \times 2 + 6 = 14 \) electrons = 7 pairs = \( n + 3 \): arachno.
  • B₁₀H₁₄ = \( \text{B}_n\text{H}_{n+4} \): \( 10 \times 2 + 4 = 24 \) electrons = 12 pairs = \( n + 2 \): nido.
  • [B₁₂H₁₂]²⁻: \( 12 \times 2 + 2 = 26 \) electrons = 13 pairs = \( n + 1 \): closo icosahedron.

Practice Q2. Diborane reacts with excess trimethylamine and, separately, with ammonia at low temperature. The products are:

(a) 2 Me₃N·BH₃ and [H₂B(NH₃)₂]⁺[BH₄]⁻ (b) [H₂B(NMe₃)₂]⁺[BH₄]⁻ and 2 H₃N·BH₃ (c) 2 Me₃N·BH₃ and borazine (d) B(NMe₂)₃ and B₃N₃H₆

Answer: (a)

The bulky amine cleaves the bridges symmetrically, giving the adduct Me₃N·BH₃. The small base NH₃ attacks one boron twice and cleaves asymmetrically, giving the “diammoniate of diborane”, [H₂B(NH₃)₂]⁺[BH₄]⁻. Borazine needs heating with ammonia.

Practice Q3. The species with an O–O bond order of 1.5 is present in:

(a) Na₂O₂ (b) KO₂ (c) Li₂O (d) BaO₂

Answer: (b) KO₂

O₂⁻ (superoxide): 13 valence electrons in the O₂ MO scheme, three in π*, bond order \( (8 - 5)/2 = 1.5 \). Na₂O₂ and BaO₂ contain peroxide (bond order 1); Li₂O contains oxide, with no O–O bond.

Practice Q4. Which statement about borazine is incorrect?

(a) It is isoelectronic with benzene. (b) All B–N bond lengths are equal. (c) With HCl it gives a substitution product in which Cl replaces H on nitrogen. (d) It can be made by heating diborane with ammonia.

Answer: (c)

Borazine adds three HCl across the B–N bonds to give B₃N₃H₉Cl₃, with Cl on boron (the electropositive atom) and H on nitrogen. It is an addition, not a substitution, and Cl does not go to nitrogen. (a), (b) and (d) are correct.

Level 3: Part C Style

Practice Q5. For B₅H₁₁, which styx code satisfies the equations of balance, and what is the Wade classification?

(a) 3203, arachno (b) 4120, nido (c) 3203, nido (d) 2302, arachno

Answer: (a) 3203, arachno

B₅H₁₁: \( p = 5 \), \( q = 6 \). Equations: \( s + x = 6 \), \( s + t = 5 \), \( t + y = 5 - 3 = 2 \).

  • 3203: \( 3 + 3 = 6 \) (holds), \( 3 + 2 = 5 \) (holds), \( 2 + 0 = 2 \) (holds).
  • 4120: \( 4 + 0 = 4 \ne 6 \) (fails; that is B₅H₉).
  • 2302: \( 2 + 2 = 4 \ne 6 \) (fails).

Wade: \( 5 \times 2 + 6 = 16 \) electrons = 8 pairs = \( n + 3 \): arachno (\( \text{B}_n\text{H}_{n+6} \)).

Electron check: \( 4p + q = 26 = 2(5) + 2(3 + 2 + 0 + 3) = 10 + 16 \) (holds).

Practice Q6. A 2.767 g sample of diborane is completely hydrolysed. The amount of H₂ evolved and the mass of boric acid formed are closest to: (B = 10.811, H = 1.008, O = 15.999)

(a) 0.60 mol H₂, 12.4 g B(OH)₃ (b) 0.30 mol H₂, 6.2 g B(OH)₃ (c) 0.60 mol H₂, 6.2 g B(OH)₃ (d) 0.10 mol H₂, 12.4 g B(OH)₃

Answer: (a)

\( M(\text{B}_2\text{H}_6) = 2(10.811) + 6(1.008) = 27.67 \) g mol⁻¹, so 2.767 g = 0.100 mol.

\( \text{B}_2\text{H}_6 + 6\text{H}_2\text{O} \rightarrow 2\text{B(OH)}_3 + 6\text{H}_2 \)

H₂: \( 6 \times 0.100 = 0.600 \) mol. B(OH)₃: \( 0.200 \) mol × 61.83 g mol⁻¹ = 12.4 g.

Every hydrogen of diborane ends up in H₂ (each B–H hydride meets a proton from water); the other half of the H₂ hydrogens come from water.

Practice Q7. A sample of boric acid is dissolved in water, excess mannitol is added, and the solution needs 25.0 mL of 0.100 M NaOH to reach the phenolphthalein end point. Which statements are correct?

  1. The sample contained about 155 mg of B(OH)₃.
  2. Mannitol is needed because B(OH)₃ alone is too weak an acid (pKa about 9.2) for a sharp end point.
  3. Each B(OH)₃ consumes three OH⁻ in the titration.
  4. The mannitol complex is a chelate of the [B(OH)₄]⁻-derived borate with cis-diol groups.

(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 4 only
  1. Correct. Moles NaOH = \( 0.0250 \times 0.100 = 2.50 \times 10^{-3} \) = moles B(OH)₃ (monobasic). Mass \( = 2.50 \times 10^{-3} \times 61.83 = 0.155 \) g = 155 mg.
  2. Correct. Without the diol the acid is too weak to titrate sharply.
  3. Wrong. Boric acid is monobasic: one OH⁻ per B.
  4. Correct. Diols chelate boron, stabilising the borate and shifting the equilibrium.

Quick Revision Table

TopicFact
Burning group 1Li → Li₂O; Na → Na₂O₂; K, Rb, Cs → MO₂
O–O bond orderO₂ 2, O₂⁻ 1.5 (paramagnetic), O₂²⁻ 1
M in NH₃(l)blue, paramagnetic, conducting (solvated e⁻); bronze when concentrated; → MNH₂ + H₂
Complex hydridesLiAlH₄ from LiH + AlCl₃; NaBH₄ from NaH + B(OMe)₃
BeCl₂linear monomer (hot vapour), chain polymer (solid)
Group 2 trendssulfate solubility ↓, hydroxide solubility ↑, carbonate stability ↑
BX₃ acidityBF₃ < BCl₃ < BBr₃ < BI₃ (back-bonding)
Al₂Cl₆2c–2e Cl bridges; AlCl₃ solid is a layer lattice
Inert pairTlI₃ = Tl⁺I₃⁻; GaCl₂ = Ga⁺[GaCl₄]⁻
B₂H₆\( D_{2h} \); 4 terminal 2c–2e + 2 bridging 3c–2e; styx 2002
Cleavagebig base symmetric (L·BH₃); NH₃ asymmetric ([H₂B(NH₃)₂]⁺[BH₄]⁻)
Wadecloso n+1, nido n+2, arachno n+3, hypho n+4 pairs; BH 2, CH 3, H 1, charge 1
styx\( s + x = q \), \( s + t = p \), \( t + y = p - q/2 \)
Borazine\( D_{3h} \), B–N 144 pm, adds HX (X to B)
BNh-BN insulator lubricant; c-BN superhard
Boric acidmonobasic Lewis acid, pKa 9.2; titrate with mannitol
Borax[B₄O₅(OH)₄]²⁻: 2 BO₃ + 2 BO₄

Key Takeaways

What’s Next