Skip to content

Carbonyl Condensations and Enolate Named Reactions

CSIR NET organic chemistry: aldol, Claisen, Dieckmann, Knoevenagel, Perkin, Stobbe, Darzens, Reformatsky, Michael, Robinson, Mannich, benzoin and Cannizzaro.

  • 20 min read
  • Updated
On this page · 16 sections
  1. Prerequisites
  2. The Hook: A Yellow Precipitate in Ten Minutes
  3. One Idea Behind All of Them
  4. The Aldol Family
  5. Claisen and Dieckmann Condensations
  6. Michael Addition and Robinson Annulation
  7. Mannich Reaction and Stork Enamine Chemistry
  8. Umpolung and Hydride Transfer: Benzoin, Cannizzaro, Tishchenko
  9. Master Table
  10. Memory Tricks
  11. Don’t Confuse
  12. Common Mistakes
  13. Practice
  14. Quick Revision Table
  15. Key Takeaways
  16. What’s Next

Prerequisites

The Hook: A Yellow Precipitate in Ten Minutes

One Idea Behind All of Them

Draw every reaction as donor + acceptor:

Donor (nucleophilic carbon)Made byAcceptor (electrophilic carbon)
Enolate of aldehyde or ketoneNaOH, NaOEt (equilibrium); LDA (complete, kinetic)Aldehyde, ketone (1,2-addition)
Ester enolateNaOEt (Claisen), LDAEster (acyl substitution)
Malonate, acetoacetate, cyanoacetate (“active methylene”)Weak amine base (piperidine, pyridine)Aldehyde (Knoevenagel)
Zinc enolate of α-bromo esterZn metalAldehyde, ketone (Reformatsky)
Enolate of α-halo esterNaOEt, KOtBuAldehyde, ketone, then internal S_N2 (Darzens)
NitronateMild baseAldehyde (Henry)
Enol or enamineAcid; secondary amineIminium ion (Mannich); alkyl halide, Michael acceptor (Stork)
Any stabilised carbanionBaseα,β-Unsaturated carbonyl, 1,4-addition (Michael)
Acyl anion equivalent (cyanohydrin anion, Breslow intermediate)CN⁻ or thiazolium / NHCSecond aldehyde (benzoin)
graph TD
    A["Carbon nucleophile next to C=O, NO2, CN"] --> B{"What is the electrophile?"}
    B -->|"aldehyde or ketone"| C["Aldol family:
aldol, Claisen-Schmidt, Knoevenagel,
Perkin, Stobbe, Reformatsky, Henry"] B -->|"ester"| D["Claisen condensation
(Dieckmann if intramolecular)"] B -->|"enone, 1,4-addition"| E["Michael, then aldol =
Robinson annulation"] B -->|"iminium ion"| F["Mannich"] B -->|"alpha-halo carbon of the donor itself"| G["Darzens: epoxide"] A2["No alpha-H aldehyde + strong base"] --> H["Cannizzaro: hydride transfer"] A3["Aldehyde + CN- or NHC"] --> I["Benzoin: umpolung"]

The Aldol Family

Aldol addition and condensation

Base (or acid) converts an aldehyde or ketone with an α-hydrogen into an enolate (or enol), which adds to a second carbonyl to give a β-hydroxy carbonyl (the aldol). On warming, especially with base and when the new double bond is conjugated, water is lost by E1cB to give the α,β-unsaturated carbonyl (aldol condensation).

$$2\,\text{CH}_3\text{CHO} \xrightarrow{\text{dil. NaOH}} \text{CH}_3\text{CH(OH)CH}_2\text{CHO} \xrightarrow{\text{heat}} \text{CH}_3\text{CH}{=}\text{CHCHO} + \text{H}_2\text{O}$$

Key points:

  • The aldol addition is reversible (retro-aldol); ketone aldols in particular lie on the side of the starting ketone, and dehydration is what pulls the reaction through.
  • Crossed (mixed) aldol between two enolisable partners gives up to four products. It is clean only when one partner has no α-H (benzaldehyde, formaldehyde, pivalaldehyde) and is the better acceptor.
  • The Claisen–Schmidt reaction is the crossed aldol condensation of an aromatic aldehyde with a ketone (the hook reaction), giving chalcones and benzylidene ketones, normally with the E alkene.
  • Intramolecular aldol reactions form five- and six-membered rings preferentially (hexane-2,5-dione gives 3-methylcyclopent-2-en-1-one).

Directed aldol and the Zimmerman–Traxler model

To control which partner is the donor, preform the enolate completely with LDA at −78 °C (kinetic, less substituted enolate), then add the acceptor. Boron enolates (R₂BOTf, amine) give the same control with tighter transition states.

The Zimmerman–Traxler model places the metal, the enolate O and C, and the acceptor C=O in a chair-like six-membered transition state with the aldehyde substituent equatorial:

Enolate geometryMajor aldol diastereomer
Z-enolatesyn aldol
E-enolateanti aldol

Short, tight metal–oxygen bonds (boron) give higher selectivity than lithium. The asymmetric versions (Evans oxazolidinone auxiliaries) belong to asymmetric synthesis; here you only need the enolate-geometry rule.

Knoevenagel condensation

An active methylene compound Z–CH₂–Z′ (Z = CO₂Et, COR, CN, NO₂) condenses with an aldehyde (or less readily a ketone) using a weak amine base (piperidine, pyridine, often with a little acid). The product is the alkylidene compound Z(Z′)C=CHR.

  • The amine may act through an iminium ion of the aldehyde, a better electrophile than the aldehyde itself.
  • Doebner modification: malonic acid in pyridine (with a little piperidine); the condensation product decarboxylates on heating to give the α,β-unsaturated acid, e.g. benzaldehyde → cinnamic acid.

Perkin reaction

Aromatic aldehyde + acid anhydride + the sodium (or potassium) salt of the same acid, heated, gives an α,β-unsaturated aromatic acid:

$$\text{PhCHO} + (\text{CH}_3\text{CO})_2\text{O} \xrightarrow{\text{CH}_3\text{CO}_2\text{Na},\ \Delta} \text{PhCH}{=}\text{CHCO}_2\text{H}\ (\text{cinnamic acid})$$

The carboxylate is the base; the anhydride supplies the enolate (an anhydride α-H is more acidic than a carboxylate α-H). The acid formed is β-aryl acrylic acid, so the α-carbon of the anhydride becomes the α-carbon of the product. Coumarin is made by a Perkin-type reaction from salicylaldehyde.

Stobbe condensation

A dialkyl succinate condenses with a ketone or aldehyde under a strong alkoxide base (NaOEt, KOtBu). The product is an alkylidene succinic acid half-ester: one ester group survives, the other becomes a carboxylate.

Why only succinates? After the aldol step, the new alkoxide attacks the distant ester carbonyl to form a five-membered γ-lactone (a paraconic ester), and this lactone then opens by E1cB elimination to the carboxylate. That irreversible step drives the reaction. Ordinary esters cannot form the lactone, which is why the Stobbe works even with ketones where a plain Claisen fails.

Darzens glycidic ester condensation

An α-halo ester + aldehyde or ketone + base (NaOEt, KOtBu) gives an α,β-epoxy ester (glycidic ester):

  1. Base forms the enolate of the α-halo ester.
  2. Aldol-type addition to the carbonyl gives a halohydrin alkoxide.
  3. The alkoxide displaces the halide by intramolecular S_N2, closing the epoxide.

Saponification, then heating the glycidic acid, causes decarboxylation and rearrangement to an aldehyde or ketone with one more carbon than the original carbonyl compound: a homologation route.

Reformatsky reaction

An α-bromo ester + zinc metal forms a zinc enolate (the Reformatsky reagent, BrZnCH₂CO₂Et), which adds to aldehydes or ketones to give β-hydroxy esters after aqueous work-up.

  • The zinc enolate is less reactive than a lithium enolate or Grignard reagent: it adds to aldehydes and ketones but does not attack the ester group of another molecule. That is the whole point of using zinc.
  • Unlike the Claisen–Schmidt route, no strong base is present, so base-sensitive acceptors survive.

Henry (nitroaldol) reaction

A nitroalkane, deprotonated by a mild base to a nitronate, adds to an aldehyde to give a β-nitro alcohol. Dehydration gives a nitroalkene; reduction of the nitro group gives a β-amino alcohol. It is the nitro analogue of the aldol.

Claisen and Dieckmann Condensations

Claisen condensation

Two molecules of an ester with α-hydrogens + one full equivalent of alkoxide (matching the ester’s alkoxy group to avoid transesterification) give a β-keto ester:

$$2\,\text{CH}_3\text{CO}_2\text{Et} \xrightarrow{\ 1.\ \text{NaOEt};\ \ 2.\ \text{H}_3\text{O}^+\ } \text{CH}_3\text{COCH}_2\text{CO}_2\text{Et} + \text{EtOH}$$

The steps are enolate formation, addition to the second ester carbonyl, and loss of ethoxide. All three are reversible and roughly thermoneutral. The reaction is driven by the final deprotonation of the β-keto ester at the doubly activated CH₂, which is far more acidic than ethanol. Consequences you must remember:

  • Stoichiometric base is needed, not catalytic.
  • An ester with only one α-H (e.g. ethyl 2-methylpropanoate) cannot form a stabilised product anion and fails with NaOEt; it needs a stronger base such as trityl sodium or LDA.
  • Acid work-up is required at the end to protonate the product anion.

Crossed Claisen is clean when one partner has no α-H and is a good acceptor: ethyl formate, diethyl carbonate, diethyl oxalate, ethyl benzoate. Ketone + ester (a “Claisen” between a ketone enolate and an ester) gives a 1,3-diketone.

Dieckmann condensation

The intramolecular Claisen of a diester. It works best when it forms a five- or six-membered ring:

DiesterRing formedProduct
Diethyl adipate (1,6-diester, C₆ chain)5ethyl 2-oxocyclopentane-1-carboxylate
Diethyl pimelate (1,7-diester, C₇ chain)6ethyl 2-oxocyclohexane-1-carboxylate

The β-keto ester can then be alkylated at the doubly activated carbon and hydrolysed and decarboxylated (H₃O⁺, heat) to a 2-substituted cycloalkanone. This three-step sequence (Dieckmann, alkylation, decarboxylation) is one of the most common Part C chains.

Unsymmetrical diesters cyclise towards the product whose β-keto ester can be deprotonated; if one α-carbon carries only one hydrogen, the ring forms so that the CH₂ (two H) side becomes the doubly activated position.

Michael Addition and Robinson Annulation

Michael addition

A stabilised carbanion (malonate, acetoacetate, nitronate, enolate of a ketone, organocuprate as the “Michael-type” reagent) adds 1,4 (conjugate addition) to an α,β-unsaturated carbonyl, nitrile, nitro compound or sulfone:

$$\text{CH}_2(\text{CO}_2\text{Et})_2 + \text{CH}_2{=}\text{CHCOCH}_3 \xrightarrow{\text{NaOEt (cat.)}} (\text{EtO}_2\text{C})_2\text{CHCH}_2\text{CH}_2\text{COCH}_3$$
  • Soft, stabilised nucleophiles favour 1,4-addition (thermodynamic control, reversible 1,2-addition). Hard nucleophiles (RLi, RMgX, LiAlH₄) favour 1,2-addition to the carbonyl.
  • Only catalytic base is needed when the product enolate is basic enough to deprotonate the next donor.
  • The product is a 1,5-dicarbonyl compound, perfectly set up for an intramolecular aldol.

Robinson annulation

Michael addition of a ketone enolate to methyl vinyl ketone (MVK), then intramolecular aldol condensation of the 1,5-diketone, builds a new cyclohexenone ring fused to the old one.

graph LR
    A["Cyclic ketone
+ MVK + base"] --> B["Michael adduct:
1,5-diketone"] B --> C["Intramolecular aldol
(6-membered ring)"] C --> D["Dehydration (E1cB)"] D --> E["Fused cyclohexenone"]

The classic example is 2-methylcyclohexane-1,3-dione + MVK → Wieland–Miescher ketone, a bicyclic enedione (C₁₁H₁₄O₂) used as the starting point for steroid and terpenoid syntheses. Counting atoms is a useful check: the Michael adduct C₁₁H₁₆O₃ loses H₂O in the aldol condensation to give C₁₁H₁₄O₂.

Mannich Reaction and Stork Enamine Chemistry

Mannich reaction

Three components: an enolisable carbonyl compound, a non-enolisable aldehyde (usually formaldehyde) and a primary or secondary amine (or ammonia), under mildly acidic conditions.

  1. Amine + formaldehyde → iminium ion CH₂=NR₂⁺ (a much better electrophile than formaldehyde).
  2. The enol of the ketone attacks the iminium carbon.
  3. The product is a β-amino carbonyl compound, a Mannich base.
$$\text{PhCOCH}_3 + \text{HCHO} + \text{Me}_2\text{NH·HCl} \longrightarrow \text{PhCOCH}_2\text{CH}_2\text{NMe}_2\text{·HCl}$$

Uses: Mannich bases eliminate the amine (after quaternisation and base, or on heating) to give α-methylene ketones (an in-situ Michael acceptor). Robinson’s tropinone synthesis is a double Mannich reaction of succinaldehyde, methylamine and acetonedicarboxylic acid (or acetone), and the Mannich reaction is the biosynthetic logic of many alkaloids.

Stork enamine reaction

A ketone + secondary amine (pyrrolidine, morpholine) with acid catalysis and water removal gives an enamine, a neutral enolate equivalent. The enamine carbon attacks:

  • reactive alkyl halides (allyl, benzyl, α-halo carbonyl): C-alkylation;
  • acyl chlorides: C-acylation, giving 1,3-diketones;
  • Michael acceptors: conjugate addition.

Aqueous acid hydrolysis then returns the ketone. Advantages over direct enolate alkylation: monoalkylation (the iminium product is not nucleophilic), no strong base, and the enamine forms towards the less substituted α-carbon (A^(1,3) strain in the more substituted enamine).

Umpolung and Hydride Transfer: Benzoin, Cannizzaro, Tishchenko

Benzoin condensation

Two aromatic aldehydes + catalytic cyanide (or a thiazolium salt / N-heterocyclic carbene with base) give an α-hydroxy ketone:

$$2\,\text{PhCHO} \xrightarrow{\text{KCN (cat.)},\ \text{EtOH–H}_2\text{O}} \text{PhCH(OH)COPh}\ (\text{benzoin})$$

Mechanism in three moves:

  1. CN⁻ adds to PhCHO to give a cyanohydrin alkoxide.
  2. Proton transfer from carbon to oxygen gives a carbanion stabilised by the nitrile and the aryl ring: the former electrophilic carbonyl carbon is now nucleophilic (umpolung, an acyl anion equivalent).
  3. This carbanion adds to a second PhCHO; loss of CN⁻ regenerates the catalyst.

Cyanide works because it is a good nucleophile, stabilises the carbanion and is a good leaving group. Thiazolium ylides do the same job through the Breslow intermediate (the chemistry of thiamine, vitamin B₁). Mixed benzoins work when one aldehyde is a better donor and the other a better acceptor.

Cannizzaro reaction

An aldehyde with no α-hydrogen (PhCHO, HCHO, furfural, (CH₃)₃CCHO) in concentrated NaOH or KOH disproportionates: one molecule is reduced to the alcohol, the other oxidised to the carboxylate.

$$2\,\text{PhCHO} + \text{OH}^- \longrightarrow \text{PhCH}_2\text{OH} + \text{PhCO}_2^-$$

Mechanism: OH⁻ adds to C=O to give a tetrahedral alkoxide (or dianion at high base), which transfers a hydride directly to a second aldehyde.

  • Evidence: in D₂O the benzyl alcohol carries no C–D bond; the new C–H hydrogen comes from the other aldehyde molecule, not from the solvent. With PhCDO the alcohol is PhCD₂OH.
  • Rate is typically second order in aldehyde and first or second order in hydroxide, depending on concentration.
  • Crossed Cannizzaro: with excess formaldehyde, HCHO (the most easily attacked aldehyde) is oxidised to formate and the more valuable aldehyde is reduced to its alcohol. In pentaerythritol synthesis, acetaldehyde first undergoes three aldols with HCHO, and the final crossed Cannizzaro reduces the aldehyde to C(CH₂OH)₄.
  • Intramolecular Cannizzaro: glyoxal → glycolate; phenylglyoxal → mandelate.

Aldehydes with α-H undergo aldol reactions instead.

Tishchenko reaction

Two aldehydes + catalytic aluminium alkoxide (Al(OEt)₃) give an ester: 2 CH₃CHO → CH₃CO₂CH₂CH₃. Mechanistically it is a Cannizzaro-type hydride transfer within an aluminium hemiacetal; the alcohol and acid halves end up joined as an ester.

Morita–Baylis–Hillman reaction

An activated alkene (acrylate, acrylonitrile, MVK) + aldehyde + a nucleophilic tertiary amine or phosphine catalyst (DABCO, PBu₃) gives an α-methylene-β-hydroxy carbonyl compound (a densely functionalised allylic alcohol). The catalyst adds 1,4 to the alkene to make an enolate, the enolate adds to the aldehyde, and proton transfer and elimination release the catalyst. Atom-economical but often slow.

Master Table

NameDonorAcceptorReagentProduct
Aldolenolate (C=O with α-H)aldehyde, ketoneNaOH or LDAβ-hydroxy carbonyl; enone on heating
Claisen–Schmidtketone enolateArCHONaOH, EtOHArCH=CHCOR (E)
Claisenester enolate (≥ 2 α-H)esterNaOR (1 equiv)β-keto ester
Dieckmanndiester (intramolecular)sameNaORcyclic β-keto ester (5-, 6-ring)
KnoevenagelZ–CH₂–Z′aldehydepiperidine / pyridineZ(Z′)C=CHR
Doebnermalonic acidaldehydepyridine, ΔRCH=CHCO₂H (− CO₂)
PerkinanhydrideArCHORCO₂Na, ΔArCH=CHCO₂H
Stobbesuccinate diesterketone, aldehydeKOtBu / NaOEtalkylidene succinic half-ester
Darzensα-halo esteraldehyde, ketoneNaOEt / KOtBuglycidic (epoxy) ester
ReformatskyBrCH₂CO₂R + Znaldehyde, ketoneZnβ-hydroxy ester
Henrynitroalkanealdehydemild baseβ-nitro alcohol
Michaelstabilised carbanionα,β-unsaturated acceptorcatalytic base1,5-dicarbonyl
Robinsonketone enolateMVKbasefused cyclohexenone
Mannichenoliminium (HCHO + R₂NH)acidβ-amino ketone
StorkenamineRX, RCOCl, enoneR₂NH, then H₃O⁺α-substituted ketone
BenzoinArCHO via CN⁻ adductArCHOCN⁻ or thiazoliumα-hydroxy ketone
CannizzaroArCHO (no α-H)sameconc. OH⁻alcohol + carboxylate
TishchenkoaldehydealdehydeAl(OR)₃ester
Morita–Baylis–Hillmanacrylate + catalystaldehydeDABCOα-methylene-β-hydroxy ester

Memory Tricks

Don’t Confuse

ThisvsThat
Aldol: enolate + aldehyde/ketone → β-hydroxy carbonylClaisen: ester enolate + ester → β-keto ester
Knoevenagel: active methylene, weak amine basePerkin: anhydride, carboxylate salt base
Darzens: α-halo ester + base → epoxy esterReformatsky: α-bromo ester + Zn → β-hydroxy ester
Michael: 1,4-addition, soft nucleophile1,2-addition: hard nucleophile (RLi, RMgX)
Cannizzaro: two aldehydes → alcohol + acid saltTishchenko: two aldehydes → ester
Benzoin: two ArCHO → ArCH(OH)COArPinacol coupling (reductive, Mg/Hg): two C=O → 1,2-diol
Mannich: enol + iminium → β-amino ketoneStork: enamine + electrophile → α-substituted ketone
Stobbe: succinate, half-ester productClaisen: any ester with two α-H, β-keto ester product

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Name the reaction: PhCHO + CH₂(CO₂H)₂ in pyridine, heated → PhCH=CHCO₂H.
  2. Why does the Reformatsky reagent not condense with its own ester group?
  3. What product does furfural give with concentrated NaOH?
Answers
  1. Knoevenagel condensation, Doebner modification (condensation followed by decarboxylation).
  2. The zinc enolate is a weak, covalent organometallic nucleophile; it adds to the more electrophilic aldehyde or ketone carbonyl but not to an ester carbonyl.
  3. Furfural has no α-H, so it undergoes the Cannizzaro reaction: furfuryl alcohol + furoate (furan-2-carboxylate).

Level 2: Part B Style

Practice Q1. Ethyl 2-methylpropanoate, (CH₃)₂CHCO₂Et, is treated with NaOEt in ethanol and then acidified. The main outcome is:

(a) ethyl 2,2,4-trimethyl-3-oxopentanoate in high yield (b) essentially no Claisen product (c) ethyl 3-hydroxy-2,2,4-trimethylpentanoate (d) 2,4-dimethylpentan-3-one

Answer: (b)

The ester has only one α-H. The Claisen product (2,2-disubstituted β-keto ester) has no acidic hydrogen between the two carbonyls, so the final deprotonation that drives the equilibrium cannot occur. With NaOEt the reaction stays on the side of starting ester. A much stronger base (e.g. trityl sodium) is needed.

Practice Q2. Which pair of reagents forms a glycidic ester with cyclohexanone?

(a) BrCH₂CO₂Et / Zn (b) ClCH₂CO₂Et / KOtBu (c) CH₂(CO₂Et)₂ / piperidine (d) (CH₃CO)₂O / CH₃CO₂Na

Answer: (b)

The Darzens reaction: enolate of the α-chloro ester adds to the ketone, and the alkoxide closes the epoxide by internal S_N2. Option (a) is Reformatsky (β-hydroxy ester), (c) Knoevenagel, (d) Perkin conditions.

Practice Q3. The Z-lithium enolate of a ketone reacts with benzaldehyde through a Zimmerman–Traxler transition state. The major aldol is:

(a) syn (b) anti (c) a 1 : 1 mixture of syn and anti (d) the dehydrated enone only

Answer: (a) syn

In the chair transition state the aldehyde phenyl is equatorial; a Z-enolate then places the two new stereocentre substituents so that the product is syn. E-enolates give anti.

Practice Q4. Benzaldehyde (1 equiv) and excess formaldehyde are heated with concentrated KOH. The major organic products are:

(a) benzoate and methanol (b) benzyl alcohol and formate (c) benzoin and methanol (d) cinnamaldehyde and water

Answer: (b)

Crossed Cannizzaro: hydroxide adds preferentially to formaldehyde, which then transfers hydride to benzaldehyde. Formaldehyde is oxidised to formate; benzaldehyde is reduced to benzyl alcohol. Neither aldehyde has an α-H, so no aldol is possible.

Level 3: Part C Style

Practice Q5. Diethyl adipate (C₁₀H₁₈O₄) is treated with NaOEt in toluene and acidified to give A. A is treated with NaOEt and then CH₃I to give B. B is heated with aqueous H₂SO₄ to give C, a liquid of molar mass about 98 g mol⁻¹. Which statements are correct?

  1. A is ethyl 2-oxocyclopentane-1-carboxylate, C₈H₁₂O₃.
  2. B has a quaternary carbon bearing the methyl group, and has molecular formula C₉H₁₄O₃.
  3. C is 2-methylcyclopentanone.
  4. Converting B to C releases ethanol and CO₂.

(a) 1, 2, 3 and 4 (b) 1 and 3 only (c) 2 and 4 only (d) 1, 3 and 4 only

Answer: (a) 1, 2, 3 and 4
  1. Dieckmann condensation of the 1,6-diester closes a five-membered ring; loss of EtOH from C₁₀H₁₈O₄ gives C₈H₁₂O₃ (M ≈ 156.2). Correct.
  2. The doubly activated C–H is replaced by C–CH₃: C₈H₁₂O₃ + CH₂ = C₉H₁₄O₃ (M ≈ 170.2); that carbon now carries CH₃, CO₂Et, the ketone carbon and a ring CH₂: quaternary. Correct.
  3. Ester hydrolysis gives the β-keto acid, which decarboxylates: 2-methylcyclopentanone, C₆H₁₀O, M = 6(12.011) + 10(1.008) + 15.999 ≈ 98.15 g mol⁻¹. Correct.
  4. Hydrolysis releases EtOH; decarboxylation releases CO₂. Correct.

Practice Q6. 2-Methylcyclohexane-1,3-dione (C₇H₁₀O₂) is treated with methyl vinyl ketone (C₄H₆O) and catalytic base to give P; P is heated with pyrrolidine and a trace of acid to give Q. Which statements are correct?

  1. P is formed by a Michael addition and has formula C₁₁H₁₆O₃.
  2. Q is formed by an intramolecular aldol condensation and has formula C₁₁H₁₄O₂.
  3. The new ring in Q is six-membered and contains an α,β-unsaturated ketone.
  4. The overall sequence is a Robinson annulation; Q is the Wieland–Miescher ketone.

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 1, 2, 3 and 4 (d) 3 and 4 only

Answer: (c) 1, 2, 3 and 4

The doubly activated C-2 adds 1,4 to MVK: C₇H₁₀O₂ + C₄H₆O = C₁₁H₁₆O₃ (no atoms lost in a Michael addition). The side-chain methyl ketone then condenses with a ring carbonyl (via the enamine with pyrrolidine catalysis), closing a six-membered ring and losing H₂O: C₁₁H₁₄O₂ (M ≈ 178.2). The product is the bicyclic enedione known as the Wieland–Miescher ketone. All four statements are correct.

Practice Q7. Benzaldehyde is heated with concentrated NaOH in D₂O. A separate experiment uses PhCDO in H₂O. Which statements are correct?

  1. In D₂O, the benzyl alcohol formed is PhCH₂OD (after exchange), with no C–D bond.
  2. With PhCDO in H₂O, the alcohol is PhCD₂OH.
  3. The experiments show that the hydrogen added to carbon comes directly from a second aldehyde molecule.
  4. The experiments show that the rate-determining step is the addition of hydroxide.

(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only

Statements 1–3 are the classic labelling result for the Cannizzaro reaction: the hydride comes from the other aldehyde, not from solvent; the O–H hydrogen exchanges with solvent. Statement 4 does not follow: labelling locates the source of the hydrogen; it says nothing about which step is rate-determining (that needs kinetics, e.g. an isotope effect). Hydride transfer is usually taken to be rate-determining.

Quick Revision Table

ReactionRemember it by
Aldol / Claisen–Schmidtenolate + aldehyde; dehydration by E1cB; Z → syn, E → anti
Claisen / Dieckmannester enolate + ester; 1 equiv base; 1,6-diester → 5-ring
Knoevenagel / Doebneractive CH₂, amine base; malonic acid + pyridine → acrylic acid
PerkinArCHO + anhydride + carboxylate → cinnamic acid
Stobbesuccinate + ketone, KOtBu; via γ-lactone; half-ester
Darzensα-halo ester + C=O + base → epoxy ester → homologated aldehyde
Reformatskyα-bromo ester + Zn → β-hydroxy ester
Michael / Robinson1,4-addition → 1,5-dicarbonyl → cyclohexenone
Mannichenol + iminium (HCHO + amine) → β-amino ketone
Storkenamine, monoalkylation at less substituted side
BenzoinCN⁻ or NHC; umpolung; α-hydroxy ketone
Cannizzarono α-H; conc. OH⁻; hydride transfer; crossed: HCHO → formate
TishchenkoAl(OR)₃; two aldehydes → ester

Key Takeaways

What’s Next