Named Reactions in Synthesis: Choosing and Combining Them
CSIR NET organic chemistry: using named reactions in synthesis — carbon bookkeeping, ring expansion and contraction, case studies, yields and roadmaps.
- 15 min
On this page · 16 sections
- Prerequisites
- The Hook: A Natural Product in One Pot
- Step 1: Recognise the Motif
- Step 2: Keep Carbon Count
- Step 3: Track the Molecular Formula
- Step 4: Check Compatibility and Selectivity
- Case Studies
- Linear versus Convergent Routes: the Arithmetic
- A Method for Part C Sequences
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Carbonyl Condensations and Enolate Named Reactions and Olefination, Redox, Aromatic and Coupling Named Reactions: the bond-forming reactions.
- Rearrangements to Electron-Deficient Centres and Anionic, Sigmatropic and Aromatic Rearrangements: the skeleton-changing reactions.
- Stereospecific and Stereoselective Reactions: which steps set stereocentres and which preserve them.
The Hook: A Natural Product in One Pot
Step 1: Recognise the Motif
The fastest way into a synthesis problem is to look at the relationship between functional groups in the product. Each named reaction leaves a fingerprint.
| Motif in the product | Named reaction that makes it | Disconnection |
|---|---|---|
| β-Hydroxy carbonyl, α,β-unsaturated carbonyl | aldol, Claisen–Schmidt, Reformatsky (β-hydroxy ester) | Cα–Cβ |
| β-Keto ester, 1,3-diketone | Claisen, Dieckmann (cyclic) | Cα–C(=O) |
| 1,5-Dicarbonyl | Michael | Cβ–Cα′ |
| Fused cyclohexenone | Robinson annulation | Michael + aldol |
| β-Amino carbonyl | Mannich | Cα–CH₂N |
| α,β-Epoxy ester; aldehyde one carbon longer | Darzens | |
| α-Hydroxy ketone (acyloin) | benzoin (ArCHO), acyloin condensation (esters + Na) | C(OH)–C(=O) |
| 1,2-Diol (symmetrical) | pinacol coupling | C–C between two carbinol carbons |
| C=C at a defined position | Wittig, HWE, Peterson, Julia, McMurry | C=C |
| γ,δ-Unsaturated carbonyl | Claisen rearrangement (and variants) | [3,3] |
| δ,ε-Unsaturated carbonyl | oxy-Cope | [3,3] |
| Homoallylic alcohol with E-alkene | [2,3]-Wittig | [2,3] |
| N-Aryl or N-alkyl amide, lactam | Beckmann | ring expansion with N |
| Ester or lactone from ketone | Baeyer–Villiger | ring expansion with O |
| Amine with one carbon fewer than an acid | Hofmann, Curtius, Lossen, Schmidt | |
| Biaryl, aryl alkene, aryl alkyne | Suzuki, Heck, Sonogashira | Ar–C |
| o-Hydroxyaryl ketone, aldehyde, acid | Fries, Reimer–Tiemann, Kolbe–Schmitt |
Step 2: Keep Carbon Count
Many Part C questions turn on one carbon gained or lost. Learn this table:
| Change | Reactions |
|---|---|
| +1 carbon at a carboxylic acid | Arndt–Eistert (RCO₂H → RCH₂CO₂H) |
| +1 carbon at an aldehyde or ketone | Darzens then decarboxylation; Wittig with Ph₃P=CHOMe then hydrolysis; Corey–Chaykovsky epoxide then rearrangement |
| +1 ring carbon | Tiffeneau–Demjanov (cyanohydrin → amino alcohol → ring-expanded ketone); diazomethane ring expansion of ketones |
| +1 ring heteroatom | Beckmann (N), Schmidt on ketones (N), Baeyer–Villiger (O) |
| −1 ring carbon | Favorskii, Wolff (cyclic diazoketone), benzilic acid (cyclic dione) |
| −1 carbon (CO₂H or CONH₂ lost) | Hofmann, Curtius, Lossen, Schmidt; Hunsdiecker (RCO₂Ag → RBr) |
| +2 to +4 ring carbons | anionic oxy-Cope of 1,2-divinyl cycloalkanols (+4) |
| new six-membered ring | Robinson annulation, Diels–Alder, Dieckmann of a 1,7-diester |
| new five-membered ring | Dieckmann of a 1,6-diester, intramolecular aldol of a 1,4-diketone |
Step 3: Track the Molecular Formula
When the question gives formulas, the formula change identifies the step even before you draw anything.
| Reaction | Formula change (substrate → product) |
|---|---|
| Aldol addition (two molecules) | A + B, nothing lost |
| Aldol condensation | A + B − H₂O |
| Claisen / Dieckmann | A + B − ROH / A − ROH |
| Michael | A + B, nothing lost |
| Robinson annulation | A + MVK − H₂O |
| Knoevenagel | A + B − H₂O |
| Wittig with Ph₃P=CHR | O replaced by CHR |
| Baeyer–Villiger | + O |
| Beckmann | none (isomerisation of the oxime) |
| Oxime formation | + NH₂OH − H₂O, i.e. + NH |
| Hofmann (amide → amine) | − CO |
| Curtius (acyl azide → isocyanate) | − N₂ |
| Arndt–Eistert (acid → acid) | + CH₂ |
| Wolff–Kishner, Clemmensen | O replaced by H₂ |
| Favorskii (α-halo ketone + MeO⁻) | − Cl + OMe (ester formed; isomeric skeleton) |
| Claisen, Cope, Fries, pinacol (−H₂O) | none (pinacol: − H₂O) |
| Cannizzaro (two aldehydes, OH⁻) | RCHO → RCH₂OH + RCO₂H (after acidification) |
Step 4: Check Compatibility and Selectivity
Before accepting a step, ask what else in the molecule it touches.
| If the molecule contains… | Avoid | Use instead |
|---|---|---|
| Acid-sensitive acetal, silyl ether, tertiary alcohol | Clemmensen, pinacol conditions, Beckmann in H₂SO₄ | Wolff–Kishner; Beckmann via TsCl and mild heat |
| Base-sensitive ester, β-elimination-prone groups | Wolff–Kishner, Cannizzaro conditions | Clemmensen; Mozingo (thioacetal + Raney Ni) |
| Alkene that must survive an oxidation | peracid Baeyer–Villiger (may epoxidise) | conditions or substrates where the ketone is more reactive, or protect the alkene |
| An ester that must survive an enolate addition | lithium enolate or Grignard | Reformatsky (zinc) |
| Enolisable aldehyde as acceptor in a crossed reaction | free mixing with base | preformed lithium enolate (directed aldol), Mukaiyama aldol |
| Need for an E- vs Z-alkene | uncontrolled Wittig | HWE (E), Still–Gennari (Z), Schlosser (E), Julia (E), Peterson (choose) |
| Stereocentre on the migrating carbon | radical or cation-forming steps | 1,2-shifts with retention (Hofmann, Curtius, Baeyer–Villiger, Arndt–Eistert) |
Case Studies
1. Building steroid and terpenoid rings: Robinson annulation
Robinson annulation of 2-methylcyclohexane-1,3-dione with MVK gives the Wieland–Miescher ketone (C₁₁H₁₄O₂), a decalin enedione with an angular methyl group, exactly the A/B-ring pattern of steroids. The analogous reaction of 2-methylcyclopentane-1,3-dione gives the Hajos–Parrish ketone, a hydrindane enedione for the C/D rings. Both are made enantioselectively when the aldol step is catalysed by (S)-proline (an enamine mechanism), which is an early example of organocatalysis.
2. Industrial rearrangements
| Product | Named step | Starting material |
|---|---|---|
| ε-Caprolactam (nylon-6 monomer) | Beckmann | cyclohexanone oxime |
| Phenol + acetone | Hock (cumene hydroperoxide) | cumene from benzene + propene |
| Salicylic acid (for aspirin) | Kolbe–Schmitt | sodium phenoxide + CO₂ |
| ε-Caprolactone (polyester monomer) | Baeyer–Villiger | cyclohexanone + peracid |
| Pinacolone | pinacol | pinacol (from acetone by reductive coupling) |
3. Ring contraction to a strained cage
Favorskii ring contraction is the classic way to make a carboxylic acid on a smaller ring. It was used twice in the classic synthesis of cubane, where α-bromo ketones within a caged framework were contracted to cubane carboxylic acids, then decarboxylated. The lesson for exams: an α-halo cyclic ketone + base → acid or ester on a ring one carbon smaller.
4. Amine synthesis without racemisation
To convert an optically active acid RCO₂H into the amine RNH₂ (one carbon fewer) with full retention, use Curtius (acyl azide from DPPA, heat, trap with t-BuOH to give RNHBoc) or Hofmann (amide, Br₂/NaOH). To make RCH₂CO₂H instead (one carbon more), use Arndt–Eistert. Together these move an amino acid to a β-amino acid or a diamine without touching the stereocentre.
5. Making medium rings
Medium rings (8–11) are hard to close directly. Named reactions expand a smaller ring instead:
- Anionic oxy-Cope of a 1,2-divinylcyclohexanol: six-membered ring → ten-membered ring (cyclodecenone).
- Beckmann or Baeyer–Villiger on a cycloheptanone: seven → eight-membered lactam or lactone.
- Tiffeneau–Demjanov: one carbon at a time.
6. Aromatic substitution patterns not reachable by direct SEAr
| Target pattern | Named sequence |
|---|---|
| ortho-Hydroxy aryl ketone | Fries rearrangement (high temperature) of the aryl ester |
| para-Allyl phenol | Claisen of 2,6-disubstituted allyl aryl ether |
| Aryl fluoride, cyanide | diazotisation, then Balz–Schiemann, Sandmeyer |
| Biaryl with defined substitution | Suzuki coupling of an aryl halide with an arylboronic acid |
| Formyl on pyrrole, indole C-3 | Vilsmeier–Haack |
| ortho-Formyl phenol | Reimer–Tiemann |
Linear versus Convergent Routes: the Arithmetic
The overall yield of a sequence is the product of the step yields along the longest linear sequence.
$$\text{overall yield} = \prod_{i} y_i$$For six steps at 90% each, done one after another: \( 0.9^6 = 0.531 \), i.e. 53.1%. If the same molecule is built as two three-step fragments joined in a coupling step (also 90%), the longest linear sequence is four steps: \( 0.9^4 = 0.656 \), i.e. 65.6%. Convergent routes also require less material to be carried through the late steps. This is why late-stage Suzuki couplings, Wittig olefinations and HWE reactions joining two large fragments are so common.
Atom economy, the fraction of reactant mass that ends up in the product, is the other number to know:
$$\text{AE} = \frac{M(\text{desired product})}{\sum M(\text{reactants})} \times 100\%$$Rearrangements and cycloadditions (Beckmann, Claisen, Cope, Diels–Alder) have 100% atom economy. Wittig reactions are poor (a Ph₃PO is discarded per C=C; about 26% for methylenecyclohexane from cyclohexanone, as worked on the olefination page). Catalytic reactions (Heck, Suzuki, Michael with catalytic base) are generally better than stoichiometric ones.
A Method for Part C Sequences
graph TD
A["Read reagents step by step"] --> B["Name each step
(reagent -> named reaction)"]
B --> C["Write the formula change
and carbon count"]
C --> D{"Formula given?"}
D -->|yes| E["Check DBE and atom count
against your structure"]
D -->|no| F["Check functional groups
reagent by reagent"]
E --> G["Add stereochemistry:
retention, anti migration,
chair TS, E/Z selectivity"]
F --> G
G --> H["Eliminate options"]Typical reagent-to-reaction look-up you should do instantly:
| Reagent(s) | Reaction |
|---|---|
| NH₂OH, then H₂SO₄ / PCl₅ / TsCl | oxime → Beckmann |
| mCPBA on a ketone | Baeyer–Villiger |
| Br₂, NaOH on an amide | Hofmann |
| NaN₃ on an acid chloride, then heat; or DPPA | Curtius |
| CH₂N₂, then Ag₂O, H₂O | Arndt–Eistert |
| HNO₂ on a β-amino alcohol | Tiffeneau–Demjanov |
| NaOMe on an α-halo ketone | Favorskii |
| KOH on a 1,2-dione | benzilic acid |
| KH, 18-crown-6 on a 3-hydroxy-1,5-diene | anionic oxy-Cope |
| MeC(OEt)₃, EtCO₂H (cat.), heat on an allylic alcohol | Johnson–Claisen |
| LDA, TMSCl on an allyl ester | Ireland–Claisen |
| NaNH₂/NH₃ on a benzyl ammonium salt | Sommelet–Hauser |
| AlCl₃ on an aryl ester | Fries |
| TsNHNH₂, then 2 n-BuLi | Shapiro |
| Me₃SiCH₂Li, then KH or H⁺ | Peterson |
| DMF, POCl₃ | Vilsmeier–Haack |
| CHCl₃, NaOH on phenol | Reimer–Tiemann |
| MVK, base on a cyclic ketone | Robinson annulation |
| HCHO, R₂NH·HCl on a ketone | Mannich |
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Tiffeneau–Demjanov: ring + 1 carbon, ketone kept | Beckmann: ring + 1 nitrogen, lactam | |
| Baeyer–Villiger: ring + 1 oxygen, lactone | Schmidt on a ketone: ring + 1 nitrogen (with HN₃) | |
| Arndt–Eistert: acid + CH₂ | Hofmann / Curtius: acid derivative − C → amine | |
| Overall yield of a linear route: product of all steps | Convergent route: product along the longest branch plus coupling | |
| Atom economy: theoretical mass efficiency | Yield: what you actually isolate |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- Which named reaction would you use to convert cyclohexanone into ε-caprolactone?
- Name a reaction that converts RCO₂H into RCH₂CO₂H.
- What motif in a target suggests a Mannich reaction?
Answers
- Baeyer–Villiger oxidation (mCPBA or another peracid).
- Arndt–Eistert homologation (acid chloride, CH₂N₂, then Wolff rearrangement with Ag₂O/H₂O).
- A β-amino carbonyl unit (R₂N–C–C–C=O).
Level 2: Part B Style
Practice Q1. Which sequence converts cyclohexanecarboxylic acid into cyclohexylamine?
(a) SOCl₂; NaN₃; heat; H₂O (b) SOCl₂; CH₂N₂; Ag₂O, H₂O (c) NH₃, heat; LiAlH₄ (d) Ag salt; Br₂
Answer: (a)
Acid chloride → acyl azide → Curtius rearrangement (heat) → isocyanate → hydrolysis and loss of CO₂ → cyclohexylamine (one carbon fewer). (b) is Arndt–Eistert (gives cyclohexylacetic acid). (c) gives cyclohexylmethanamine (same carbon count). (d) is Hunsdiecker (bromocyclohexane).
Practice Q2. A target contains a fused bicyclic α,β-unsaturated ketone with an angular methyl group at the ring fusion. The most direct named reaction is:
(a) Dieckmann condensation (b) Robinson annulation (c) Stobbe condensation (d) Darzens condensation
Answer: (b)
A fused cyclohexenone with an angular substituent is the Robinson annulation fingerprint (Michael addition of a 2-substituted cyclic ketone to MVK, then intramolecular aldol condensation).
Practice Q3. A synthesis has six linear steps with yields 90%, 85%, 80%, 95%, 70% and 90%. The overall yield is closest to:
(a) 26% (b) 37% (c) 52% (d) 85%
Answer: (b)
Multiply step by step: 0.90 × 0.85 = 0.765; × 0.80 = 0.612; × 0.95 = 0.5814; × 0.70 = 0.4070; × 0.90 = 0.3663. Overall ≈ 36.6%, i.e. about 37%. The average step yield (85%) is the trap.
Practice Q4. Which pair of reactions both increase ring size by one atom?
(a) Favorskii and Wolff (b) Beckmann and Baeyer–Villiger (c) benzilic acid and Favorskii (d) Claisen and Fries
Answer: (b)
Beckmann inserts N and Baeyer–Villiger inserts O into the ring of a cyclic ketone. Favorskii, Wolff (of cyclic diazoketones) and benzilic acid (of cyclic diones) contract rings. Claisen and Fries do not change ring size.
Level 3: Part C Style
Practice Q5. Cyclohexanone (C₆H₁₀O) is treated with HCN to give P (C₇H₁₁NO); P is reduced with LiAlH₄ to Q (C₇H₁₅NO); Q with NaNO₂/HCl gives R (C₇H₁₂O). R is converted into its oxime and treated with conc. H₂SO₄ to give S (C₇H₁₃NO). Which statements are correct?
- R is cycloheptanone, formed by Tiffeneau–Demjanov ring expansion.
- S is an eight-membered lactam (azocan-2-one).
- P to Q reduces the nitrile to a primary amine.
- The oxime of R and S have the same molecular formula.
(a) 1, 2, 3 and 4 (b) 1 and 2 only (c) 2 and 3 only (d) 1, 3 and 4 only
Answer: (a) 1, 2, 3 and 4
P is the cyanohydrin (C₇H₁₁NO, M ≈ 125.2). LiAlH₄ reduces C≡N to CH₂NH₂: Q = 1-(aminomethyl)cyclohexan-1-ol (C₇H₁₅NO, M ≈ 129.2). Diazotisation and ring-bond migration give cycloheptanone (C₇H₁₂O, M ≈ 112.2). The oxime is C₇H₁₃NO (+ NH); Beckmann rearrangement is an isomerisation, so S is also C₇H₁₃NO (M ≈ 127.2): N inserted into the seven-membered ring gives an eight-membered lactam, azocan-2-one. All four correct.
Practice Q6. A target is made by Route I: six linear steps at 85% each. Route II builds two fragments, each in three steps at 85%, and joins them in one coupling step at 75%. Which statements are correct?
- Route I overall yield ≈ 37.7%.
- Route II overall yield (based on either fragment) ≈ 46.1%.
- Route II is better even though its coupling step has a lower yield than any step of Route I.
- The yield of a convergent route equals the product of all seven step yields.
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
Route I: \( 0.85^6 = 0.3771 \), i.e. 37.7%. Route II: the longest linear sequence is three fragment steps plus the coupling, \( 0.85^3 \times 0.75 = 0.6141 \times 0.75 = 0.4606 \), i.e. 46.1%. So statements 1 and 2 are correct, and Route II wins despite its weaker coupling step (statement 3). Statement 4 is wrong: the two fragment branches run in parallel, so the yield based on one fragment multiplies only the steps on its own branch and the coupling, not all seven steps (multiplying all seven would give \( 0.85^6 \times 0.75 = 0.283 \)).
Practice Q7. Acetophenone (C₈H₈O) is treated with mCPBA to give X (C₈H₈O₂). X is heated with AlCl₃ (no solvent, high temperature) to give Y (C₈H₈O₂), which gives a violet colour with FeCl₃ and shows a strongly hydrogen-bonded OH in its IR spectrum. Which statements are correct?
- X is phenyl acetate.
- Y is 2-hydroxyacetophenone.
- X → Y is a Fries rearrangement.
- Methyl benzoate would have been formed in the first step if methyl migrated preferentially.
(a) 1, 2 and 3 only (b) 1, 2, 3 and 4 (c) 2 and 3 only (d) 1 and 4 only
Answer: (b) 1, 2, 3 and 4
Baeyer–Villiger: phenyl migrates in preference to methyl, giving phenyl acetate (+ O: C₈H₈O → C₈H₈O₂). If methyl had migrated, O would be inserted on the methyl side to give methyl benzoate, PhCO₂CH₃ (statement 4 is a correct conditional). The Fries rearrangement at high temperature gives the ortho isomer, 2-hydroxyacetophenone, an isomer of X (both C₈H₈O₂, M ≈ 136.2); its phenol gives the FeCl₃ colour and its OH is intramolecularly hydrogen-bonded to the C=O.
Quick Revision Table
| Goal | Named reactions |
|---|---|
| +1 C to an acid | Arndt–Eistert |
| +1 C to a carbonyl | Darzens; Wittig with Ph₃P=CHOMe |
| −1 C, acid → amine | Hofmann, Curtius, Lossen, Schmidt |
| −1 C, acid → bromide | Hunsdiecker |
| Ring + C | Tiffeneau–Demjanov |
| Ring + N / + O | Beckmann, Schmidt / Baeyer–Villiger |
| Ring − C | Favorskii, Wolff, benzilic acid |
| Ring + 4 C | anionic oxy-Cope of 1,2-divinyl cycloalkanol |
| New fused cyclohexenone | Robinson annulation |
| β-Amino ketone | Mannich |
| Industrial | Beckmann (caprolactam), Hock (phenol), Kolbe–Schmitt (salicylic acid) |
| Yield | product of steps along longest linear sequence |
| Atom economy | M(product)/ΣM(reactants); rearrangements 100% |
Key Takeaways
What’s Next
- Named Reactions and Rearrangements: Quick Revision: every reaction of the chapter on one page.
- Stereochemical control in these steps: Stereospecific and Stereoselective Reactions.
- Revisit the intermediates: Carbocations and Carbanions.
- Back to the chapter overview.