Olefination, Redox, Aromatic and Coupling Named Reactions
CSIR NET organic chemistry: Wittig, HWE, Peterson, Julia, McMurry, Shapiro, Clemmensen, Wolff–Kishner, Birch, Swern, Vilsmeier, Sandmeyer, Pd couplings.
- 17 min
On this page · 15 sections
- Prerequisites
- The Hook: Turning C=O into C=C
- Making Alkenes: the Olefination Family
- Named Reductions
- Named Oxidations
- Named Aromatic Substitutions
- Palladium Cross-Coupling: One Cycle, Many Names
- Two Phosphine-Driven Substitutions
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Carbonyl Condensations and Enolate Named Reactions: the donor–acceptor way of reading a reaction carries over to ylides and phosphonate anions.
- Carbanions: phosphorus and sulfur ylides, α-silyl carbanions and vinyl anions.
- Benzenoid Aromatic Compounds: electrophilic aromatic substitution and directing effects for the aromatic named reactions.
- Homogeneous Catalysis by Organometallic Complexes: oxidative addition, transmetallation and reductive elimination in the Pd cross-coupling cycle.
The Hook: Turning C=O into C=C
Making Alkenes: the Olefination Family
Wittig reaction
A phosphonium ylide Ph₃P⁺–C⁻HR (made from Ph₃P + RCH₂X, then base) reacts with an aldehyde or ketone to give an alkene and triphenylphosphine oxide:
$$\text{Ph}_3\text{P}{=}\text{CHR}' + \text{R}_2\text{C}{=}\text{O} \longrightarrow [\text{oxaphosphetane}] \longrightarrow \text{R}_2\text{C}{=}\text{CHR}' + \text{Ph}_3\text{P}{=}\text{O}$$Under salt-free conditions the ylide and carbonyl combine directly to a four-membered oxaphosphetane, which collapses by syn-elimination (the older betaine picture is now considered less general). The very strong P=O bond is the thermodynamic driving force.
Stereochemistry depends on the ylide:
| Ylide type | R′ on the ylide carbon | Base needed | Major alkene |
|---|---|---|---|
| Non-stabilised | alkyl, H | strong: n-BuLi, NaNH₂, NaHMDS | Z (kinetic; best under salt-free conditions) |
| Semi-stabilised | aryl, allyl | moderate | E/Z mixtures |
| Stabilised | CO₂R, COR, CN | weak: NaOEt, Et₃N, even NaOH | E (oxaphosphetane formation reversible or late TS) |
- Schlosser modification: a non-stabilised ylide, lithium salts, low temperature, then a second equivalent of PhLi and protonation equilibrates the intermediate, delivering the E-alkene.
- Stabilised ylides react sluggishly with ketones, and Wittig reagents generally do not olefinate esters.
- Ph₃P=CHOMe with a ketone gives an enol ether, hydrolysed to an aldehyde with one more carbon: a homologation.
Horner–Wadsworth–Emmons (HWE)
A phosphonate carbanion (EtO)₂P(O)–C⁻H–CO₂Et replaces the stabilised ylide.
- The phosphonate is made by the Michaelis–Arbuzov reaction: P(OEt)₃ + BrCH₂CO₂Et → (EtO)₂P(O)CH₂CO₂Et + EtBr.
- The carbanion (NaH, or LiCl/DBU for sensitive substrates) is more nucleophilic than the corresponding stabilised ylide and reacts with ketones as well as aldehydes.
- The by-product is a water-soluble dialkyl phosphate, removed by aqueous work-up (Ph₃PO from a Wittig needs chromatography).
- Selectivity: strongly E for α,β-unsaturated esters.
- Still–Gennari variant: bis(2,2,2-trifluoroethyl) phosphonates with KHMDS and 18-crown-6 at low temperature give the Z-enoate. Electron-withdrawing groups on phosphorus speed up elimination so the kinetic adduct is trapped.
Peterson olefination
An α-silyl carbanion (Me₃SiCH₂Li or Me₃SiCH₂MgCl) adds to a carbonyl to give a β-hydroxysilane, which can be isolated and then eliminated two ways:
| Conditions | Elimination | Consequence |
|---|---|---|
| Acid (H₂SO₄, BF₃) | anti (E2-like) | one alkene isomer |
| Base (KH, NaH) | syn (via a four-membered Si–O ring, like the oxaphosphetane) | the other alkene isomer |
So a single diastereomer of the β-hydroxysilane can give either E or Z alkene, depending on whether you choose acid or base. This is the favourite Part C point. If the silyl carbanion carries a stabilising group, elimination is spontaneous and the selectivity is lost.
Julia olefination
- Julia–Lythgoe: a phenyl sulfone carbanion adds to an aldehyde; the β-alkoxy sulfone is acylated (Ac₂O or BzCl) and then reduced with sodium amalgam (or SmI₂). The radical/anionic elimination gives mainly the E-alkene regardless of the adduct’s stereochemistry.
- Julia–Kocienski (modified Julia): with a heteroaryl sulfone (benzothiazolyl or 1-phenyltetrazolyl), the alkoxide attacks the heteroaryl ring (a Smiles rearrangement), and SO₂ and the heteroaryl oxide are lost in one pot. Usually E-selective.
Methylenating esters: Tebbe and Petasis
Wittig reagents fail with esters. The Tebbe reagent (a titanium–aluminium methylene complex, Cp₂Ti(μ-Cl)(μ-CH₂)AlMe₂) and the Petasis reagent (Cp₂TiMe₂) deliver a titanium methylidene Cp₂Ti=CH₂, which converts esters into enol ethers and lactones into cyclic enol ethers, through a titanaoxetane. The Ti=O bond formed is the driving force.
McMurry coupling
Two ketones or aldehydes + low-valent titanium (TiCl₃ or TiCl₄ reduced with LiAlH₄, Zn–Cu or Zn) give an alkene by reductive coupling:
$$2\,\text{R}_2\text{C}{=}\text{O} \xrightarrow{\text{TiCl}_4,\ \text{Zn}} \text{R}_2\text{C}{=}\text{CR}_2$$The reaction passes through a titanium pinacolate (a 1,2-diolate) that is deoxygenated on the titanium surface. It makes highly hindered and symmetrical alkenes (tetraisopropylethylene, stilbenes) and, intramolecularly from dicarbonyls, rings of almost any size.
Shapiro and Bamford–Stevens reactions
Both start from a ketone tosylhydrazone, R₂C=N–NHTs:
| Reaction | Base | Intermediate | Alkene |
|---|---|---|---|
| Shapiro | 2 equiv alkyllithium (n-BuLi, MeLi), aprotic | dianion → loss of Ts⁻ and N₂ → vinyllithium | less substituted alkene (kinetic deprotonation at the less hindered α-carbon); the vinyllithium can be trapped with electrophiles (D₂O, CO₂, DMF) |
| Bamford–Stevens | NaOMe, NaH, heat | diazo compound → carbene (aprotic) or carbocation (protic) | more substituted alkene (thermodynamic), possible rearrangement |
Named Reductions
| Name | Reagent | Bond change | Tolerates / limits |
|---|---|---|---|
| Clemmensen | Zn(Hg), conc. HCl, heat | C=O → CH₂ | for acid-stable, base-sensitive substrates; aryl ketones work best |
| Wolff–Kishner | N₂H₄, KOH (or KOtBu), heat | C=O → CH₂ | for base-stable, acid-sensitive substrates |
| Huang Minlon modification | N₂H₄·H₂O, KOH, diethylene glycol; distil off water, then ~200 °C | same, one pot | practical version of Wolff–Kishner |
| Meerwein–Ponndorf–Verley (MPV) | Al(OiPr)₃, isopropanol | C=O → CH–OH | chemoselective: C=C, NO₂, esters untouched; reversible |
| Birch | Na or Li, liquid NH₃, ROH | arene → cyclohexa-1,4-diene | see below |
| Rosenmund | H₂, Pd/BaSO₄ poisoned (quinoline–S) | RCOCl → RCHO | poison stops over-reduction to alcohol |
| Luche | NaBH₄, CeCl₃, MeOH | enone → allylic alcohol (1,2) | suppresses 1,4-reduction |
Wolff–Kishner mechanism
The ketone forms a hydrazone. Base removes an N–H proton; the anion is protonated on carbon; a second N–H deprotonation gives an anion that loses N₂ to form a carbanion, which is protonated by solvent. Loss of N₂ makes the last steps irreversible.
MPV reduction and Oppenauer oxidation
Both run through the same six-membered cyclic transition state in which a hydride moves from the isopropoxide carbon (bound to Al) to the coordinated carbonyl carbon. MPV uses excess isopropanol and distils off acetone to drive reduction. The reverse, the Oppenauer oxidation, uses Al(OtBu)₃ or Al(OiPr)₃ with excess acetone (or cyclohexanone) as the hydride acceptor to oxidise a secondary alcohol to a ketone; it is the classic way to oxidise steroidal alcohols, where the Δ⁵ double bond also moves into conjugation (cholesterol → cholest-4-en-3-one).
Birch reduction: the regiochemistry rule
Solvated electrons add to the ring to give a radical anion; protonation by the alcohol, a second electron and a second protonation give the non-conjugated 1,4-diene. Protonation occurs where the charge density is highest.
| Substituent | Type | Product | Position of substituent |
|---|---|---|---|
| OMe, alkyl, NR₂ | electron-donating | 1-methoxycyclohexa-1,4-diene (from anisole) | on a double-bond carbon (unreduced) |
| CO₂H, CONR₂ | electron-withdrawing | cyclohexa-2,5-diene-1-carboxylic acid (from benzoic acid) | on an sp³ (reduced) carbon |
The enol ether from anisole hydrolyses in mild aqueous acid to cyclohex-3-enone, and in stronger acid isomerises to the conjugated cyclohex-2-enone. Alkynes are reduced by Na/NH₃ to E-alkenes (contrast Lindlar H₂ → Z).
Named Oxidations
| Name | Reagent | Transformation | Point to remember |
|---|---|---|---|
| Swern | (COCl)₂, DMSO, −78 °C; then Et₃N | 1° alcohol → aldehyde; 2° → ketone | no over-oxidation; by-products Me₂S (smell), CO, CO₂ |
| Dess–Martin | Dess–Martin periodinane (hypervalent iodine) | same | neutral, room temperature |
| Oppenauer | Al(OtBu)₃, acetone | 2° alcohol → ketone | reverse of MPV |
| Sharpless asymmetric epoxidation | Ti(OiPr)₄, diethyl tartrate, t-BuOOH | allylic alcohol → epoxy alcohol | the tartrate enantiomer chooses the face; the OH is required |
| Baeyer–Villiger | peracid | ketone → ester | a rearrangement: see the next page |
Swern mechanism: DMSO + oxalyl chloride → chlorodimethylsulfonium ion (CO and CO₂ lost); the alcohol attacks sulfur to give an alkoxysulfonium ion; Et₃N deprotonates a methyl group to give a sulfonium ylide, which removes the carbinol hydrogen through a five-membered cyclic transition state, releasing Me₂S and the carbonyl compound. The activated DMSO species is stable only at low temperature; if the mixture warms before the base step, Pummerer-type side reactions give methylthiomethyl ethers.
Named Aromatic Substitutions
| Name | Substrate | Reagents | Electrophile / intermediate | Product |
|---|---|---|---|---|
| Friedel–Crafts alkylation | arene | RX, AlCl₃ | carbocation (or complex) | alkylarene; rearrangement and polyalkylation possible |
| Friedel–Crafts acylation | arene (not strongly deactivated) | RCOCl, AlCl₃ (≥ 1 equiv) | acylium ion RC≡O⁺ | aryl ketone; no rearrangement, no polyacylation |
| Gattermann–Koch | benzene, alkylbenzenes | CO, HCl, AlCl₃, CuCl | formyl cation equivalent | ArCHO (not for phenols or phenol ethers) |
| Gattermann | phenols, ethers, activated arenes | HCN (or Zn(CN)₂), HCl, Lewis acid | iminium, hydrolysed | ArCHO |
| Houben–Hoesch | polyhydric phenols | RCN, HCl, ZnCl₂ | nitrilium / ketiminium | aryl ketone after hydrolysis |
| Vilsmeier–Haack | electron-rich arenes, heteroarenes (pyrrole, indole, anilines) | DMF, POCl₃ | chloroiminium ion (Vilsmeier reagent) | ArCHO after hydrolysis |
| Reimer–Tiemann | phenol | CHCl₃, NaOH | dichlorocarbene :CCl₂ | o-hydroxybenzaldehyde (salicylaldehyde) mainly |
| Kolbe–Schmitt | sodium phenoxide | CO₂, pressure, heat; then H⁺ | CO₂ (weak electrophile) | salicylic acid (ortho); potassium phenoxide at higher temperature favours para |
| Sandmeyer | ArN₂⁺ | CuCl, CuBr, CuCN | aryl radical (single-electron transfer from Cu(I)) | ArCl, ArBr, ArCN |
| Balz–Schiemann | ArN₂⁺ BF₄⁻ | heat | aryl cation | ArF |
| Ullmann | aryl halide | Cu, heat | organocopper | biaryl Ar–Ar (also Ar–O, Ar–N with Cu catalysis) |
Why the ortho preference in Reimer–Tiemann and Kolbe–Schmitt? The phenoxide oxygen and the metal ion hold the incoming electrophile (dichlorocarbene, CO₂) near the ortho carbon. In Kolbe–Schmitt the sodium chelate is the key; with the larger potassium ion and higher temperature, the thermodynamically favoured para isomer forms.
Hunsdiecker reaction (not aromatic substitution, but a frequent partner in questions): a silver carboxylate + Br₂ gives an alkyl bromide with one carbon fewer (RCO₂Ag + Br₂ → RBr + CO₂ + AgBr), by a radical chain through an acyl hypobromite. The Kochi (Pb(OAc)₄, LiCl) and Barton (thiohydroxamate esters) decarboxylations do similar jobs.
Palladium Cross-Coupling: One Cycle, Many Names
All Pd(0)-catalysed couplings of an organic halide R–X (aryl, vinyl; X = I, OTf, Br, Cl in decreasing reactivity) share three steps:
graph LR
A["Pd(0)L2"] -->|"oxidative addition
of R-X"| B["R-Pd(II)-X"]
B -->|"transmetallation
R'-M"| C["R-Pd(II)-R'"]
C -->|"reductive elimination
R-R'"| AThe Heck reaction replaces transmetallation by migratory insertion of an alkene and β-hydride elimination; a base regenerates Pd(0) from H–Pd–X.
| Name | Partner R′–M | Extra requirement | Product |
|---|---|---|---|
| Heck (Mizoroki–Heck) | alkene (no metal) | base (Et₃N, K₂CO₃) | substituted alkene, usually E; syn insertion, syn β-H elimination |
| Suzuki–Miyaura | R′B(OH)₂, boronate ester | base (activates boron to a borate) | R–R′; non-toxic, air- and water-tolerant boron reagents |
| Stille | R′SnBu₃ | none | R–R′; tolerant but toxic tin |
| Negishi | R′ZnX | none | R–R′; reactive, sp³ partners possible |
| Kumada (Kumada–Corriu) | R′MgX | Ni or Pd | R–R′; Grignard limits functional groups |
| Sonogashira | terminal alkyne | CuI co-catalyst, amine base | aryl/vinyl alkyne (copper acetylide transmetallates) |
| Buchwald–Hartwig | amine R₂NH | strong base, bulky phosphine | aryl amine (C–N) |
| Tsuji–Trost | soft nucleophile + allylic acetate | Pd(0) | allylic substitution via η³-allyl Pd |
Two Phosphine-Driven Substitutions
- Mitsunobu reaction: an alcohol + an acidic pronucleophile (carboxylic acid, phenol, imide such as phthalimide, HN₃ source) + PPh₃ + DEAD or DIAD gives the substitution product with inversion at the alcohol carbon. The alcohol oxygen is activated as an alkoxyphosphonium ion and displaced by S_N2. By-products: Ph₃P=O and the hydrazine dicarboxylate. Used to invert secondary alcohols (via the ester, then hydrolysis).
- Appel reaction: PPh₃ + CCl₄ (or CBr₄) converts an alcohol into the alkyl halide, also with inversion; the driving force is again P=O.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Wittig: Ph₃P ylide, Ph₃PO by-product | HWE: phosphonate anion, water-soluble phosphate, E-selective, reacts with ketones | |
| Peterson: Si, acid anti / base syn | Julia: sulfone, reductive elimination, E | |
| Shapiro: 2 RLi, vinyllithium, less substituted alkene | Bamford–Stevens: NaOMe, carbene/cation, more substituted alkene | |
| Clemmensen: Zn(Hg)/HCl | Wolff–Kishner: N₂H₄/KOH | |
| MPV: Al(OiPr)₃ + iPrOH, reduces | Oppenauer: Al(OtBu)₃ + acetone, oxidises | |
| Birch of alkyne: E-alkene | Lindlar H₂: Z-alkene | |
| Gattermann–Koch: CO/HCl, not phenols | Gattermann: HCN/HCl, works on phenols | |
| Sandmeyer: Cu(I) salt, Cl/Br/CN | Balz–Schiemann: BF₄⁻, heat, F | |
| Mitsunobu: inversion, PPh₃/DEAD | Swern: oxidation, DMSO/(COCl)₂ |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- Which reagent converts an ester into a methyl enol ether in one step?
- What is the main product of Birch reduction of anisole?
- Name the electrophile in the Reimer–Tiemann reaction.
Answers
- The Tebbe (or Petasis) reagent: a titanium methylidene equivalent. Wittig reagents do not react with esters.
- 1-Methoxycyclohexa-1,4-diene: OMe on a double-bond carbon.
- Dichlorocarbene, :CCl₂, formed by α-elimination from CHCl₃ and NaOH.
Level 2: Part B Style
Practice Q1. Propanal reacts with Ph₃P=CHCH₃ (from ethyltriphenylphosphonium bromide and n-BuLi, salt-free) to give mainly:
(a) (E)-pent-2-ene (b) (Z)-pent-2-ene (c) (E)-hex-3-ene (d) (Z)-hex-3-ene
Answer: (b)
Propanal (C₃) + the ethylidene ylide (C₂) gives a C₅ alkene, CH₃CH₂CH=CHCH₃, which is pent-2-ene; the hex-3-ene options add a carbon too many. Ph₃P=CHCH₃ is a non-stabilised ylide, so under salt-free conditions the Z-alkene is the major product.
Practice Q2. A ketone is converted to its tosylhydrazone and treated with 2 equiv n-BuLi, then with D₂O. The product is:
(a) the more substituted alkene with D on the alkene carbon (b) the less substituted alkene with D on the former carbonyl carbon (c) the alkane with CD₂ in place of C=O (d) an α-deuterated ketone
Answer: (b)
Shapiro reaction: the dianion loses Ts⁻ and N₂ to give a vinyllithium in which Li sits on the former carbonyl carbon, with the double bond towards the less substituted α-carbon (kinetic deprotonation). D₂O quenches it to the vinyl deuteride.
Practice Q3. Which method is suitable for converting the aryl ketone 4-(tetrahydropyran-2-yloxy)acetophenone (an acid-labile THP ether, stable to base) into the corresponding ethylbenzene derivative without cleaving the THP group?
(a) Clemmensen reduction (b) Wolff–Kishner (Huang Minlon) reduction (c) MPV reduction (d) Rosenmund reduction
Answer: (b)
A THP ether is an acetal and is cleaved by strong aqueous acid, so Clemmensen (Zn(Hg)/conc. HCl) is unsuitable. Wolff–Kishner converts C=O to CH₂ under strongly basic conditions, which a THP ether survives. MPV stops at the alcohol; Rosenmund reduces acid chlorides.
Practice Q4. In the Sonogashira coupling of iodobenzene with phenylacetylene, the role of CuI is to:
(a) oxidatively add to iodobenzene (b) form a copper acetylide that transmetallates to palladium (c) reduce Pd(II) to Pd(0) only (d) act as the base
Answer: (b)
Copper(I) and the amine base convert the terminal alkyne into a copper acetylide, which transfers the alkynyl group to the aryl–Pd(II) species. Pd does the oxidative addition; the amine is the base.
Level 3: Part C Style
Practice Q5. A single diastereomer of a β-hydroxysilane, R–CH(OH)–CH(SiMe₃)–R′, is divided into two portions. Portion 1 is treated with KH in THF; portion 2 with H₂SO₄ in THF. Portion 1 gives the Z-alkene. Which statements are correct?
- Portion 2 gives the E-alkene.
- Elimination with KH proceeds through a four-membered ring containing Si and O.
- Acid-promoted elimination is anti.
- If the β-hydroxysilane were a 1 : 1 mixture of diastereomers, both conditions would give 1 : 1 E/Z mixtures.
(a) 1, 2 and 3 only (b) 1, 2, 3 and 4 (c) 2 and 3 only (d) 1 and 4 only
Answer: (b) 1, 2, 3 and 4
Base: the alkoxide attacks silicon, forming a four-membered Si–O ring, and syn-elimination follows. Acid: protonated OH leaves anti to the silyl group. Syn and anti eliminations from the same diastereomer give opposite geometries, so if KH gives Z, acid gives E. With a 1 : 1 diastereomer mixture each diastereomer gives one geometry under each condition, so both conditions give 1 : 1 E/Z. All four statements are correct.
Practice Q6. Methylenecyclohexane is made from cyclohexanone (C₆H₁₀O) and Ph₃P=CH₂ (C₁₉H₁₇P). Take C = 12.011, H = 1.008, O = 15.999, P = 30.974. Which statements are correct?
- The atom economy of the olefination step is about 26%.
- About 2.9 g of Ph₃PO is formed per gram of methylenecyclohexane.
- Making the same alkene by CH₃MgBr addition followed by acid-catalysed dehydration would give mainly 1-methylcyclohexene instead.
- The Wittig reaction places the double bond where the carbonyl oxygen was.
(a) 1, 2, 3 and 4 (b) 3 and 4 only (c) 1 and 2 only (d) 1, 3 and 4 only
Answer: (a) 1, 2, 3 and 4
Molar masses: Ph₃P=CH₂ 276.32; cyclohexanone 98.15; methylenecyclohexane (C₇H₁₂) 96.17; Ph₃PO (C₁₈H₁₅OP) 278.29 g mol⁻¹. Mass balance: 276.32 + 98.15 = 96.17 + 278.29 = 374.47.
$$\text{AE} = \frac{96.17}{374.47} \times 100 = 25.7\%$$Ph₃PO per gram of product: 278.29/96.17 = 2.89 g. Dehydration of 1-methylcyclohexanol goes via the tertiary cation to the more substituted, endocyclic alkene. The Wittig reaction forms C=C exactly at the former C=O. All four are correct.
Practice Q7. Benzoic acid is reduced with Li in liquid NH₃ containing t-BuOH and the resulting carboxylate is acidified to give X (C₇H₁₀O₂). X is then heated with Pd/C. Which statements are correct?
- X is cyclohexa-2,5-diene-1-carboxylic acid.
- X contains two isolated C=C bonds and one sp³ ring carbon bearing CO₂H.
- The ring carbon bearing CO₂H in X is sp² hybridised.
- Heating X with Pd/C can regenerate an aromatic compound by dehydrogenation.
(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 4 only
An electron-withdrawing carboxylate directs protonation (and so reduction) to C-1 and C-4: the CO₂H ends up on an sp³ carbon, with the two C=C at 2,3 and 5,6. Statement 3 is therefore wrong. Formula check: C₆H₅CO₂H (C₇H₆O₂) + 4 H = C₇H₁₀O₂. Pd/C dehydrogenation re-aromatises the 1,4-diene (to benzoic acid).
Quick Revision Table
| Reaction | Key reagent | Key outcome |
|---|---|---|
| Wittig | Ph₃P=CHR | non-stabilised Z; stabilised E; Ph₃PO |
| HWE / Still–Gennari | (RO)₂P(O)CH⁻CO₂R | E / Z (CF₃CH₂O groups, KHMDS, 18-crown-6) |
| Peterson | Me₃SiCH₂Li | acid anti, base syn |
| Julia | PhSO₂CH⁻R; Na/Hg | E-alkene |
| Tebbe / Petasis | Ti methylidene | ester → enol ether |
| McMurry | TiCl₄/Zn | 2 R₂C=O → R₂C=CR₂ |
| Shapiro / Bamford–Stevens | TsNHN=CR₂ + RLi / NaOMe | less / more substituted alkene |
| Clemmensen / Wolff–Kishner | Zn(Hg)–HCl / N₂H₄–KOH | C=O → CH₂ |
| MPV / Oppenauer | Al(OiPr)₃–iPrOH / Al(OtBu)₃–acetone | reduction / oxidation, 6-membered TS |
| Birch | Na, NH₃, ROH | 1,4-diene; EDG on C=C, EWG on sp³ C |
| Swern | DMSO, (COCl)₂, Et₃N | alcohol → aldehyde/ketone |
| Vilsmeier–Haack | DMF, POCl₃ | ArCHO on electron-rich rings |
| Reimer–Tiemann / Kolbe–Schmitt | CHCl₃–NaOH / CO₂ | ortho-CHO / ortho-CO₂H on phenol |
| Sandmeyer | CuX on ArN₂⁺ | ArCl, ArBr, ArCN |
| Pd couplings | Pd(0), R–X + R′–M | OA, TM, RE; Heck uses insertion + β-H elimination |
| Mitsunobu | PPh₃, DEAD, HA | inversion at carbinol carbon |
Key Takeaways
What’s Next
- Rearrangements to Electron-Deficient Carbon, Nitrogen and Oxygen: pinacol, Beckmann, Hofmann, Curtius, Baeyer–Villiger and their relatives.
- Directing effects for the aromatic reactions: Benzenoid Aromatic Compounds.
- Revise the condensations: Carbonyl Condensations and Enolate Named Reactions.
- Back to the chapter overview.