Skip to content

Nuclear Reactions

CSIR NET chemistry: reaction notation, Q value and threshold, Coulomb barrier, compound nucleus, cross-sections, moderation and radionuclide production.

  • 18 min read
  • Updated
On this page · 17 sections
  1. Prerequisites
  2. The Hook: Rutherford’s Long-Range Protons
  3. Writing a Nuclear Reaction
  4. The Q Value
  5. Why Neutrons Are the Best Projectiles: the Coulomb Barrier
  6. How Reactions Proceed: Compound Nucleus and Direct Reactions
  7. Types of Nuclear Reactions
  8. Reaction Cross-Section
  9. Neutron Sources and Moderation
  10. Making Radionuclides
  11. Memory Tricks
  12. Don’t Confuse
  13. Common Mistakes
  14. Practice
  15. Quick Revision Table
  16. Key Takeaways
  17. What’s Next

Prerequisites

The Hook: Rutherford’s Long-Range Protons

Writing a Nuclear Reaction

A reaction in which projectile a hits target X to give product Y and light particle b is written in full or in the compact (Bethe) notation:

$$\text{X} + a \longrightarrow \text{Y} + b \qquad\equiv\qquad \text{X}(a, b)\text{Y}$$

So Rutherford’s reaction is ¹⁴N(α,p)¹⁷O. Common light particles: n, p, d (²H), t (³H), α (⁴He), γ, e⁻, e⁺.

What is conserved

QuantityConserved?Use
Total charge (sum of Z)yesfind the missing Z
Total nucleon number (sum of A)yesfind the missing A
Total energy (rest mass + kinetic)yesQ value
Linear momentumyesthreshold energy, recoil
Angular momentum and parityyesselection of states (beyond most exam questions)
Rest mass alonenothe difference is Q
Number of protons alone, or neutrons alonenot in weak processes; yes in purely strong reactions—

The Q Value

The Q value is the energy released, equal to the decrease in rest mass:

$$\boxed{Q = \left[(M_X + M_a) - (M_Y + M_b)\right] \times 931.494\ \text{MeV u}^{-1}}$$

Atomic masses can be used directly whenever the total Z is the same on both sides (it always is), because the electrons cancel. Equivalently, Q equals the gain in kinetic energy: \( Q = (T_Y + T_b) - (T_X + T_a) \).

QNameMeaning
Q > 0exoergic (exothermic)releases energy; can occur even with very slow projectiles if no barrier stops it
Q < 0endoergic (endothermic)needs kinetic energy above a threshold

Threshold energy

For an endoergic reaction it is not enough to supply |Q|. Momentum must be conserved, so the products must still move together after the collision, and that kinetic energy of the centre of mass is not available for the reaction. Non-relativistically, for a target at rest:

$$\boxed{E_{\text{th}} = -Q\left(1 + \frac{m_a}{m_X}\right)}$$

For ¹⁴N(α,p)¹⁷O: \( E_{\text{th}} = 1.19 \times (1 + 4.0026/14.0031) \) = 1.53 MeV.

The heavier the projectile relative to the target, the larger the correction. For neutrons on a heavy target the threshold is barely above |Q|.

Q values worth knowing

ReactionQ (MeV), from atomic massesHistorical or practical note
⁹Be(α,n)¹²C+5.70Chadwick’s neutron (1932); Am–Be and Ra–Be neutron sources
⁷Li(p,α)⁴He+17.35Cockcroft and Walton, first accelerator-induced reaction
²⁷Al(α,n)³⁰P−2.64Irène Joliot-Curie and Frédéric Joliot, first artificial radioactivity; ³⁰P is a β⁺ emitter
¹⁴N(α,p)¹⁷O−1.19Rutherford, first transmutation
⁶Li(n,α)³H+4.78tritium production; neutron detection
¹H(n,γ)²H+2.22equals the deuteron binding energy

Why Neutrons Are the Best Projectiles: the Coulomb Barrier

A positive projectile must approach the target against electrostatic repulsion. The barrier height, with the two nuclei touching at \( R = r_0(A_1^{1/3} + A_2^{1/3}) \), is

$$V_C = \frac{Z_1 Z_2 e^2}{4\pi\varepsilon_0 R} \approx \frac{1.44\, Z_1 Z_2}{R/\text{fm}}\ \text{MeV}$$

For α + ¹⁴N with r₀ = 1.2 fm, R ≈ 4.8 fm and V_C ≈ 4.2 MeV. For α + ²³⁸U it is close to 28 MeV. Quantum tunnelling allows some reaction below V_C, but the probability falls very fast as the energy drops.

Consequences:

  • Neutrons feel no Coulomb barrier, so even thermal neutrons (about 0.025 eV) react readily, mostly by (n,γ) capture. This is why reactors are such efficient isotope factories.
  • Charged particles (p, d, α, heavy ions) need accelerators (cyclotrons, linear accelerators) and the barrier rises with the target’s Z.
  • Fusion of light nuclei is only practical at very high temperatures for the same reason, as covered in Fission and Fusion.

How Reactions Proceed: Compound Nucleus and Direct Reactions

The compound nucleus (Bohr)

At low to moderate energies the projectile is absorbed and its energy is shared among all the nucleons, forming an excited compound nucleus C*:

$$\text{X} + a \longrightarrow \text{C}^{*} \longrightarrow \text{Y} + b$$

C* lives far longer than the time a projectile takes to cross a nucleus (that transit time is of the order of 10⁻²² s), long enough to “forget” how it was formed. This is the independence hypothesis: the way C* decays (by emitting n, p, α or γ) depends only on its energy, angular momentum and parity, not on how it was made. Emission from C* is roughly isotropic in the centre-of-mass frame, like evaporation from a hot drop.

Direct reactions

At higher projectile energies, or for loosely bound projectiles, the reaction can happen in one quick step at the nuclear surface, on the transit time scale, with no compound nucleus:

  • Stripping: (d,p), the deuteron leaves its neutron in the target.
  • Pickup: (p,d), the proton picks up a neutron from the target.
  • Knock-out and inelastic scattering to collective states.

Products of direct reactions are strongly forward-peaked, the experimental signature that separates them from compound-nucleus evaporation.

FeatureCompound nucleusDirect reaction
Time scalelong compared with transit timeabout one transit time
Memory of entrance channellost (independence)kept
Angular distributionroughly isotropic (CM frame)forward-peaked
Energy rangelow to moderate; resonances at low energyhigher energies, surface reactions
Examples(n,γ), (α,n) at low energy(d,p) stripping, (p,d) pickup

Types of Nuclear Reactions

TypeExampleNotes
Elastic scattering(n,n)no change of state; basis of neutron moderation
Inelastic scattering(n,n′)target left excited, then emits γ
Radiative capture⁵⁹Co(n,γ)⁶⁰Co; ²³Na(n,γ)²⁴Nathe dominant thermal-neutron reaction; same element, so product is not carrier-free
(n,p)³²S(n,p)³²P; ¹⁴N(n,p)¹⁴Cproduct is a different element, so it can be separated carrier-free; ¹⁴N(n,p)¹⁴C makes radiocarbon in the atmosphere
(n,α)¹⁰B(n,α)⁷Li; ⁶Li(n,α)³Hlarge thermal cross-sections; neutron detectors, control rods, boron neutron capture therapy
(p,n)¹⁸O(p,n)¹⁸Fcyclotron production of the PET isotope ¹⁸F
(d,n), (d,p)²H(d,n)³He; strippingneutron generators; spectroscopy of nuclear levels
(α,n)⁹Be(α,n)¹²Cportable neutron sources
Photonuclear(γ,n)needs γ energy above the neutron separation energy
Spallationhigh-energy p on a heavy targetmany nucleons chipped off; intense neutron sources
Fission²³⁵U(n,f)see Fission and Fusion
Fusion / heavy-ionlight + light, or heavy ion + actinideenergy production; synthesis of transactinide elements

Reaction Cross-Section

The probability of a reaction is expressed as an effective target area, the cross-section σ:

$$1\ \text{barn (b)} = 10^{-24}\ \text{cm}^2 = 10^{-28}\ \text{m}^2$$

For a thin target of N nuclei in a uniform neutron flux φ (neutrons cm⁻² s⁻¹):

$$\boxed{R = N\,\sigma\,\varphi} \qquad (\text{reactions per second})$$

Keep the units consistent: σ in cm² with φ in cm⁻² s⁻¹.

How σ depends on energy

RegionBehaviourReason
Thermal and slow neutronsσ ∝ 1/v, i.e. ∝ \( E^{-1/2} \)time spent near the nucleus is proportional to 1/v
Epithermal (eV to keV)sharp resonancesthe compound nucleus has discrete levels; σ peaks when the excitation matches a level (Breit–Wigner shape)
Fast (MeV)smoother, of the order of the geometric areamany overlapping levels; threshold reactions such as (n,p) and (n,2n) open

Thermal neutrons are defined by the energy \( kT \) at about 293 K: E ≈ 0.025 eV, most probable speed about 2200 m s⁻¹. Cross-sections are tabulated at this reference energy.

Some thermal (n,γ) cross-sections are enormous (¹¹³Cd, ¹⁵⁷Gd, ¹³⁵Xe), which is why cadmium and boron make control rods and why the fission product ¹³⁵Xe “poisons” a reactor. Nuclides with magic neutron numbers have very small capture cross-sections.

Neutron Sources and Moderation

SourceReactionNeutron energy
Nuclear reactorfission of ²³⁵Ufission spectrum (average about 2 MeV), moderated to thermal
Isotopic (α,n) source⁹Be(α,n)¹²C with ²⁴¹Am or ²²⁶Raa few MeV, broad spectrum
Spontaneous-fission source²⁵²Cffission spectrum
Neutron generator³H(d,n)⁴He (D–T)about 14 MeV, nearly monoenergetic
Spallation sourceGeV protons on a heavy-metal targetvery intense, broad

Fast neutrons are slowed by elastic collisions with light nuclei. In a head-on collision with a nucleus of mass number A, the largest possible fractional energy loss is

$$\left(\frac{\Delta E}{E}\right)_{\max} = 1 - \left(\frac{A-1}{A+1}\right)^2$$

which is 100% for ¹H, 89% for ²H and only 28% for ¹²C. The average logarithmic energy loss per collision, ξ, is 1.00 for H, about 0.725 for D and about 0.158 for C, so taking a 2 MeV neutron to 0.025 eV needs about ln(8 × 10⁷)/ξ collisions: roughly 18 in hydrogen, 25 in deuterium and 115 in carbon. Hydrogen moderates best per collision but also absorbs neutrons; heavy water absorbs far fewer, so it can be used with natural uranium.

Making Radionuclides

The production route decides the decay mode and the specific activity of the product.

RouteProductsTypical decaySpecific activityExamples
Reactor (n,γ)neutron-rich isotope of the same elementβ⁻limited by the stable target (not carrier-free)⁶⁰Co, ²⁴Na, ¹⁹⁸Au, ⁹⁹Mo
Reactor (n,p), (n,α)neutron-rich isotope of a different elementβ⁻carrier-free after chemical separation³²P from ³²S, ¹⁴C from ¹⁴N, ³H from ⁶Li
Reactor, fission productsneutron-rich mid-mass nuclidesβ⁻carrier-free after separation⁹⁹Mo, ¹³¹I, ¹³⁷Cs, ⁹⁰Sr
Cyclotron (p,n), (d,n), (α,xn)proton-rich isotopesβ⁺ or ECcarrier-free¹⁸F, ¹¹C, ¹³N, ¹⁵O, ⁶⁷Ga, ¹¹¹In, ²⁰¹Tl
Generatorsshort-lived daughter of a longer-lived parentvariouscarrier-free⁹⁹ᵐTc from ⁹⁹Mo, ⁶⁸Ga from ⁶⁸Ge

The general rule: reactors make neutron-rich (β⁻) nuclides, cyclotrons make proton-rich (β⁺, EC) nuclides.

The Szilard–Chalmers effect gives a way round the low specific activity of (n,γ) products: the recoil from γ emission breaks the chemical bond, so the radioactive atoms end up in a different chemical form from the bulk target and can be separated. It is described with the other tracer techniques in Radio-analytical Techniques.

Synthesis of transuranium elements

Neutron capture followed by β⁻ decay climbs the periodic table, because each β⁻ raises Z by one:

$$^{238}\text{U}(n,\gamma)\,^{239}\text{U} \xrightarrow{\beta^-,\ \approx 23\ \text{min}} {}^{239}\text{Np} \xrightarrow{\beta^-,\ \approx 2.4\ \text{d}} {}^{239}\text{Pu}$$

This is how ²³⁹Pu is made in reactors and how the first transuranium elements were reached. Repeated captures in high-flux reactors build up curium, californium and beyond, but the chain stops near fermium because the nuclides become too short-lived. The heavier elements are made one atom at a time by heavy-ion fusion, for example light ions (C, O, Ne) or medium-mass ions on actinide or lead/bismuth targets, followed by neutron evaporation.

The same logic filled gaps in the lighter periodic table: technetium (Z = 43), which has no stable isotope, was first identified in molybdenum bombarded with deuterons.

Memory Tricks

Don’t Confuse

ThisvsThat
Q value: energy released (rest-mass difference)Threshold energy: minimum projectile KE, larger than −Q
Coulomb barrier (charged particles)Threshold (energy balance, any projectile)
Compound nucleus: isotropic, independent of formationDirect reaction: forward-peaked, one step
³²S(n,p)³²P: carrier-free³¹P(n,γ)³²P: diluted by stable ³¹P
1/v region (smooth, thermal)Resonance region (sharp peaks, eV–keV)
Moderator: slows neutrons (H₂O, D₂O, graphite)Absorber: removes neutrons (Cd, B)
Stripping (d,p)Pickup (p,d)

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper. Masses and cross-sections given in a question are data for that question.

Level 1: Foundation

  1. Identify X: ⁹Be + ⁴He → ¹²C + X.
  2. Express 1 barn in m².
  3. Is a reactor or a cyclotron the natural source of ¹⁸F?
Answers
  1. A: 9 + 4 − 12 = 1; Z: 4 + 2 − 6 = 0. X is a neutron.
  2. 10⁻²⁸ m² (10⁻²⁴ cm²).
  3. A cyclotron: ¹⁸F is proton-rich (a β⁺ emitter), made by ¹⁸O(p,n)¹⁸F.

Level 2: Part B Style

Practice Q1. Using M(²⁷Al) = 26.981538 u, M(⁴He) = 4.002603 u, mₙ = 1.008665 u and M(³⁰P) = 29.978314 u, the Q value of ²⁷Al(α,n)³⁰P is:

(a) +2.64 MeV (b) −2.64 MeV (c) −3.04 MeV (d) −1.19 MeV

Answer: (b)

Reactants 30.984141 u; products 30.986979 u; Δm = −0.002838 u; Q = −0.002838 × 931.494 = −2.64 MeV. Option (c) is the threshold energy (next question), a deliberate distractor.

Practice Q2. For the reaction in Q1, the threshold kinetic energy of the α particle (target at rest) is closest to:

(a) 2.64 MeV (b) 3.04 MeV (c) 2.28 MeV (d) 5.28 MeV

Answer: (b)

E_th = 2.64 × (1 + 4.0026/26.9815) = 2.64 × 1.148 = 3.04 MeV.

Practice Q3. Which reaction gives a product that can be obtained carrier-free by chemical separation from the target?

(a) ³¹P(n,γ)³²P (b) ⁵⁹Co(n,γ)⁶⁰Co (c) ³²S(n,p)³²P (d) ²³Na(n,γ)²⁴Na

Answer: (c)

Only in (c) does the product (P) differ from the target element (S), so phosphorus can be separated chemically with no stable phosphorus added. The (n,γ) products are isotopes of the target element.

Practice Q4. A 0.100 g gold foil (M = 196.97 g mol⁻¹, single isotope) is placed in a thermal flux of 1.0 × 10¹² n cm⁻² s⁻¹. Take σ = 98.7 b. The capture rate is closest to:

(a) 3.0 × 10¹⁰ s⁻¹ (b) 3.0 × 10⁶ s⁻¹ (c) 3.0 × 10¹⁴ s⁻¹ (d) 9.9 × 10¹⁰ s⁻¹

Answer: (a)

N = 3.06 × 10²⁰; R = Nσφ = 3.06 × 10²⁰ × 9.87 × 10⁻²³ cm² × 10¹² cm⁻² s⁻¹ = 3.0 × 10¹⁰ s⁻¹. Using σ in m² with the flux in cm⁻² gives (b), off by 10⁴.

Level 3: Part C Style

Practice Q5. A nucleus has a thermal (0.025 eV) capture cross-section of 40 b and follows the 1/v law up to 1 eV. Which statements are correct?

  1. Its cross-section at 0.10 eV is 20 b.
  2. Its cross-section at 0.0025 eV is about 126 b.
  3. At 0.10 eV the capture rate per target nucleus, for the same neutron density, is the same as at 0.025 eV.
  4. At 0.10 eV the neutrons move at about 4400 m s⁻¹.

(a) 1 and 4 only (b) 1, 2 and 4 only (c) 1, 2, 3 and 4 (d) 2 and 3 only

Answer: (c) 1, 2, 3 and 4

σ ∝ E^(−1/2).

  1. Energy × 4 gives σ ÷ 2: 20 b. Correct.
  2. Energy ÷ 10 gives σ × √10 = 40 × 3.16 = 126 b. Correct.
  3. Rate per nucleus = nvσ (n = neutron density). Under the 1/v law vσ is constant, so the rate is independent of speed. Correct, and this is why 1/v absorbers are good neutron-density monitors.
  4. v ∝ √E: 2200 × √4 = 4400 m s⁻¹. Correct.

Practice Q6. The compound nucleus ⁶⁴Zn* is formed (i) from p + ⁶³Cu and (ii) from α + ⁶⁰Ni at the same excitation energy. Which statements are correct?

  1. The ratio of ⁶³Zn to ⁶²Zn produced should be about the same in (i) and (ii).
  2. Product particles from (ii) should be strongly forward-peaked because the α particle is heavier.
  3. Taking the formation Q values as +7.7 MeV for p + ⁶³Cu → ⁶⁴Zn and +4.0 MeV for α + ⁶⁰Ni → ⁶⁴Zn, route (ii) needs about 3.7 MeV more centre-of-mass kinetic energy than route (i) to reach the same excitation energy.
  4. The result tests Bohr’s independence hypothesis.

(a) 1, 3 and 4 only (b) 1 and 2 only (c) 2 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 3 and 4 only
  1. Correct: by the independence hypothesis the decay channels depend only on the state of ⁶⁴Zn*.
  2. Wrong: compound-nucleus emission is roughly isotropic in the CM frame. Forward peaking is the mark of direct reactions.
  3. Correct: excitation energy = Q(formation) + CM kinetic energy. Equal excitation needs CM energies differing by 7.7 − 4.0 = 3.7 MeV, the α route needing more (and its Coulomb barrier, Z₁Z₂ = 56 against 29, is also higher).
  4. Correct: this is Ghoshal’s experiment.

Practice Q7. Uranium-238 in a reactor is converted to ²³⁹Pu. Which sequence and statements are correct?

  1. ²³⁸U(n,γ)²³⁹U, then two successive β⁻ decays.
  2. The intermediate after the first β⁻ decay is ²³⁹Np.
  3. The mass number changes in each β⁻ step.
  4. The overall change from ²³⁸U to ²³⁹Pu is ΔZ = +2, ΔA = +1.

(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 4 only

Capture adds one nucleon (A 238 → 239, Z unchanged). β⁻ raises Z: U (92) → Np (93) → Pu (94), with A fixed at 239 (statement 3 wrong). Net: ΔZ = +2, ΔA = +1.

Quick Revision Table

IdeaFact
NotationX(a,b)Y; conserve A, Z, energy, momentum
Q value[(M_X + M_a) − (M_Y + M_b)] × 931.494 MeV; atomic masses fine
ThresholdE_th = −Q(1 + m_a/m_X) for target at rest
Classic Q values⁹Be(α,n) +5.70; ⁷Li(p,α) +17.35; ²⁷Al(α,n) −2.64; ¹⁴N(α,p) −1.19 MeV
Coulomb barrier≈ 1.44 Z₁Z₂/R MeV (R in fm); α + ¹⁴N ≈ 4.2 MeV
Compound nucleusBohr; independence hypothesis; isotropic; Ghoshal (⁶⁴Zn*)
Directstripping (d,p), pickup (p,d); forward-peaked
Cross-section1 b = 10⁻²⁴ cm²; R = Nσφ
Energy dependence1/v (thermal) → resonances (eV–keV) → smooth (MeV)
Thermal neutrons≈ 0.025 eV, ≈ 2200 m s⁻¹
Moderationmax loss 1 − ((A−1)/(A+1))²: H 100%, D 89%, C 28%; ξ: H 1, D 0.725, C 0.158
Productionreactor → β⁻ (neutron-rich); cyclotron → β⁺/EC (proton-rich); (n,p)/(n,α)/fission → carrier-free
Transuranium²³⁸U(n,γ)²³⁹U → ²³⁹Np → ²³⁹Pu (two β⁻); heaviest elements by heavy-ion fusion

Key Takeaways

What’s Next

Advertisement
Advertisement