Chemo-, Regio- and Stereoselective Transformations
CSIR NET organic selectivity: chemoselective reagents, Markovnikov vs anti, epoxide opening, kinetic vs thermodynamic enolates, 1,2 vs 1,4, directed reactions.
- 18 min
On this page · 14 sections
Prerequisites
- Reductions and Oxidations: the reagents whose selectivity this page explains.
- Stereospecific and Stereoselective Reactions: the vocabulary (stereospecific, diastereoselective, ee, dr) and \( \Delta\Delta G^\ddagger = RT\ln(\text{ratio}) \).
- Carbanions: Acidity, Enolates, Ylides: enolate formation and ambident reactivity.
- Carbocations: Structure, Stability and Rearrangements: the basis of Markovnikov selectivity.
The Hook: A Steroid With Four Targets
Definitions and the Physical Basis
- Chemoselectivity: preferential reaction of one functional group over another (or others) present in the same molecule or mixture.
- Regioselectivity: preferential bond formation or cleavage at one of two or more possible positions within a functional group (Markovnikov versus anti-Markovnikov; 1,2 versus 1,4; one α-carbon versus the other).
- Stereoselectivity: preferential formation of one stereoisomer (diastereo- or enantioselectivity). The definitions, and how stereoselective differs from stereospecific, are on the stereochemistry page.
All three are ratios of rates under kinetic control:
$$\frac{[\text{P}_1]}{[\text{P}_2]} = \frac{k_1}{k_2} = e^{\Delta\Delta G^\ddagger/RT}$$At 298 K, a factor of 10 corresponds to about 5.7 kJ mol⁻¹. Under thermodynamic control (reversible formation of the products), the ratio reflects the product stabilities instead, \( e^{-\Delta G^\circ/RT} \). Many selectivity switches (kinetic versus thermodynamic enolates, 1,2 versus 1,4 addition to dienes, endo versus exo) are switches between these two regimes, made by changing temperature, time, counter-ion or base strength.
Measuring chemoselectivity: the competition experiment
Mix equimolar A and B with a deficit of reagent. If both react by pseudo-first-order kinetics in the same pot, the remaining fractions obey
$$\frac{k_A}{k_B} = \frac{\ln([A]/[A]_0)}{\ln([B]/[B]_0)}$$This is independent of how the reagent concentration changes during the run, because both substrates experience the same reagent at every moment. It is the standard way to get relative rates of fast reactions.
Chemoselectivity
What controls it
| Control element | Idea | Examples |
|---|---|---|
| Intrinsic electrophilicity | the more electrophilic group reacts first with a nucleophile | aldehyde > ketone > ester > amide toward NaBH₄ |
| Intrinsic nucleophilicity / electron density | the more electron-rich group reacts first with an electrophile | mCPBA picks the most substituted C=C; amines acylate before alcohols |
| Reagent tuning | electron-withdrawing ligands or steric bulk attenuate a reagent | NaBH₃CN and NaBH(OAc)₃ reduce iminium ions, not ketones |
| Reagent polarity | electrophilic versus nucleophilic reagents reverse the order | BH₃ reduces acids before esters; LiAlH₄/NaBH₄ the opposite |
| Temperature and stoichiometry | stop after the first, faster step | DIBAL (1 equiv, −78 °C): ester → aldehyde |
| Coordination / direction | a nearby group binds the reagent | VO(acac)₂ epoxidises only the allylic C=C; MnO₂ only allylic/benzylic OH |
| Masking in situ | one group is reversibly tied up | Luche: aldehydes form methoxy hemiacetal/acetal species in MeOH/CeCl₃, so the ketone is reduced |
| Protecting groups | temporarily remove a group from competition | acetal on a ketone during ester reduction with LiAlH₄ |
Classic chemoselective pairs
| Substrate pair (same molecule) | Reagent | Reacts | Survives |
|---|---|---|---|
| Ketone + ester | NaBH₄ | ketone | ester |
| Aldehyde + ketone | NaBH(OAc)₃; NaBH₄ at low temperature | aldehyde | ketone |
| Ketone + aldehyde | NaBH₄/CeCl₃ in MeOH (Luche) | ketone | aldehyde (as an acetal, released on work-up) |
| Carboxylic acid + ester | BH₃·THF | acid | ester |
| Ester + carboxylic acid | LiBH₄ | ester | acid (as carboxylate) |
| Ester + amide | LiBH₄ | ester | amide |
| Ketone + iminium (reductive amination) | NaBH₃CN, pH 6–7 | iminium | ketone |
| Allylic alcohol + saturated alcohol | MnO₂ | allylic | saturated |
| Primary + secondary alcohol | TEMPO/NaOCl | primary | secondary |
| Alkyne + alkene | H₂, Lindlar | alkyne (to Z-alkene) | alkene |
| Conjugated C=C + C=O | H₂, Pd/C | C=C | C=O |
| Monosubstituted + trisubstituted C=C | Wilkinson’s catalyst; 9-BBN | monosubstituted | trisubstituted |
| Electron-rich C=C + enone C=C | mCPBA | electron-rich | enone |
| Enone C=C + isolated C=C | H₂O₂, NaOH | enone | isolated |
| Allylic C=C + isolated C=C (in an allylic alcohol) | VO(acac)₂, tBuOOH | allylic | isolated |
| Amine + alcohol | Ac₂O (no DMAP), 1 equiv | amine (amide) | alcohol |
| Aryl iodide + aryl chloride | Pd(0), Suzuki partner | Ar–I | Ar–Cl (for a later coupling) |
| Ketone + ester (C–C bond) | Reformatsky reagent (BrZnCH₂CO₂Et) | ketone | ester |
Regioselectivity
Additions to alkenes and alkynes
| Reaction | Regiochemistry | Origin |
|---|---|---|
| HX, H₃O⁺ | Markovnikov (H to the less substituted carbon) | more stable carbocation; rearrangements possible |
| Oxymercuration–demercuration | Markovnikov, no rearrangement | bridged mercurinium ion opened at the more substituted carbon |
| Halohydrin formation (Br₂, H₂O or NBS, H₂O) | OH at the more substituted carbon, Br at the less; anti | bromonium opened by water where positive charge is better stabilised |
| HBr + peroxides | anti-Markovnikov | Br• adds to give the more stable radical |
| Hydroboration–oxidation | anti-Markovnikov, syn | B to the less hindered carbon (steric and electronic); 9-BBN, disiamylborane and thexylborane are more selective than BH₃ |
| Wacker oxidation | Markovnikov: terminal alkene → methyl ketone | nucleopalladation at the more substituted carbon |
| Hg²⁺-catalysed alkyne hydration | Markovnikov: terminal alkyne → methyl ketone | |
| Hydroboration of a terminal alkyne | anti-Markovnikov: aldehyde | |
| Hydroformylation | linear (n) or branched (iso) aldehyde | set by the ligand (bulky phosphines and phosphites favour linear) |
| Heck reaction | aryl to the less substituted alkene carbon | steric control of insertion |
| Diels–Alder, unsymmetrical partners | “ortho” and “para” products | largest HOMO and LUMO coefficients overlap |
Epoxide opening
| Conditions | Site of attack on an unsymmetrical epoxide | Character |
|---|---|---|
| Basic or neutral, strong nucleophile (RO⁻, CN⁻, N₃⁻, RMgX, LiAlH₄, R₂CuLi) | less substituted carbon | SN2: steric control; inversion |
| Acidic (H₃O⁺, ROH/H⁺, HX) | more substituted carbon (tertiary or benzylic) | borderline SN2 with a loose, cation-like transition state: electronic control; still inversion |
| Lewis acid with a weak nucleophile | usually more substituted | similar to acid |
| Ti(OiPr)₄-mediated opening of 2,3-epoxy alcohols | usually C3 | chelation of the epoxy alcohol to Ti |
Cyclohexene oxides open to give trans-diaxial products first (the Fürst–Plattner rule): the nucleophile approaches along the axial direction so that the transition state is chair-like. In a conformationally locked epoxide this decides which carbon is attacked, even against steric bias.
Enolates: which α-carbon?
| Conditions | Enolate formed from 2-methylcyclohexanone | Control |
|---|---|---|
| LDA (or LiHMDS), THF, −78 °C, ketone added to excess base | less substituted (Δ¹,⁶): deprotonation at C6 (CH₂) | kinetic: the less hindered proton is removed faster; irreversible |
| Weaker base or excess ketone, higher temperature, protic solvent, K⁺ or Na⁺ counter-ion (e.g. KOtBu/tBuOH, NaH with catalytic ketone) | more substituted (Δ¹,²): deprotonation at C2 (CH) | thermodynamic: equilibration via proton exchange; more substituted enolate C=C is more stable |
| Et₃N, TMSCl, DMF, heat (House conditions) | more substituted silyl enol ether | thermodynamic |
| LDA, TMSCl, −78 °C | less substituted silyl enol ether | kinetic |
| Li/NH₃ reduction of an enone | specific enolate at the former α-carbon | regiospecific generation |
Other regiochemical choices for enolates:
- C- versus O-alkylation: soft electrophiles (alkyl iodides) alkylate carbon; hard electrophiles (TMSCl, acyl chlorides, Me₂SO₄ in HMPA) favour oxygen.
- Enones (α′ versus γ): LDA at −78 °C removes the α′-proton (cross-conjugated enolate, kinetic); equilibrating conditions give the extended dienolate by γ-deprotonation, which is nevertheless alkylated mainly at α (deconjugative alkylation).
Conjugated systems
| Reagent class | Preferred site on an α,β-unsaturated carbonyl | Examples |
|---|---|---|
| Hard, reactive, irreversible nucleophiles | 1,2 (carbonyl carbon) | RLi, RMgX (mostly), LiAlH₄, Luche (NaBH₄/CeCl₃) |
| Soft or stabilised nucleophiles; reversible additions | 1,4 (β-carbon) | R₂CuLi, RMgX/CuI, enolates of malonates (Michael), thiols, amines, Sakurai allylsilanes, L-Selectride (some substrates) |
| Electrophile on a conjugated diene (HBr on buta-1,3-diene) | 1,2-adduct at low temperature (kinetic); 1,4-adduct on warming (thermodynamic) | the allylic cation is attacked fastest at the carbon next to where H added; the 1,4-adduct has the more substituted alkene |
Elimination and rearrangement
- Zaitsev (more substituted alkene): small bases (EtO⁻, HO⁻), good leaving groups, E1.
- Hofmann (less substituted alkene): bulky bases (KOtBu, LDA), poor or charged leaving groups (NMe₃⁺ in Hofmann elimination, F), syn eliminations (Cope, Chugaev) where the more numerous or accessible β-H wins.
- Baeyer–Villiger: oxygen inserts next to the group best able to carry positive charge.
- Birch reduction: donors stay on the C=C, acceptors end up on the sp³ carbon.
- Directed ortho-metalation (DoM): coordinating groups (CONR₂, OMe, OCONEt₂, NHBoc) direct n-BuLi or s-BuLi to the adjacent ortho position, overriding the normal electrophilic substitution pattern described on the aromatic substitution page.
Stereoselectivity in Transformations
The models are developed on the stereochemistry pages; here is the transformation-centred summary.
| Transformation | Controlling feature | Outcome |
|---|---|---|
| Hydride reduction of a substituted cyclohexanone | reagent size | small (LiAlH₄, NaBH₄): axial attack → equatorial OH; bulky (L-Selectride): equatorial attack → axial OH |
| Nucleophilic addition to an α-chiral aldehyde | Felkin–Anh (non-chelating) vs chelation (α-OR with Mg²⁺, Zn²⁺, Ti⁴⁺) | opposite diastereomers |
| Reduction of a β-hydroxy ketone | Et₂BOMe then NaBH₄ (Narasaka–Prasad, intermolecular hydride on a boron chelate) vs Me₄NBH(OAc)₃ (Evans–Saksena, intramolecular delivery) | syn-1,3-diol vs anti-1,3-diol |
| Epoxidation of a cyclic allylic alcohol | mCPBA (Henbest, H-bonding) or VO(acac)₂/TBHP (coordination) | epoxide cis to OH |
| Cyclopropanation of an allylic alcohol | Simmons–Smith; Zn coordinates to OH | cyclopropane cis to OH |
| Hydrogenation of a cyclic homoallylic or allylic alcohol | Crabtree’s catalyst (Ir binds OH) | H₂ delivered cis to OH |
| Hydrogenation, heterogeneous | adsorption on the less hindered face | H₂ syn, from the less hindered face |
| Hydroboration | approach from the less hindered face, syn | e.g. α-pinene: borane adds anti to the gem-dimethyl bridge |
| Alkylation of a cyclohexanone enolate | stereoelectronics: axial approach through a chair-like TS | electrophile enters axially, then the ring may flip |
| Enolate alkylation adjacent to a stereocentre | approach anti to the larger neighbouring group | trans-2,3-disubstitution after conjugate addition–alkylation |
| Aldol of a preformed enolate | Zimmerman–Traxler chair | Z-enolate → syn; E-enolate → anti |
| Iodolactonisation (I₂, NaHCO₃) of a γ,δ-unsaturated acid | anti addition through an iodonium ion | iodide and lactone oxygen trans; kinetic (short time) vs thermodynamic (longer, reversible) diastereomers |
| Diels–Alder | endo rule | endo adduct under kinetic control |
| Alkyne reduction | Lindlar vs Na/NH₃ vs Red-Al | Z vs E vs E (allylic alcohol) |
| Enantioselective oxidations and reductions | chiral catalysts: Sharpless AE and AD, Jacobsen, CBS, Noyori, enzymes | one enantiomer; see asymmetric induction |
graph TD
Q["Substrate with
several reactive sites"] --> C{"Which functional
group?"}
C -->|"intrinsic reactivity,
reagent tuning,
direction, protection"| CH["Chemoselective step"]
CH --> R{"Which position
in that group?"}
R -->|"cation/radical stability,
sterics, hard/soft,
kinetic vs thermodynamic"| RE["Regioselective step"]
RE --> S{"Which face or
stereoisomer?"}
S -->|"existing stereocentres,
chelation, direction,
chiral catalyst or enzyme"| ST["Stereoselective step"]Worked Example: Planning a Selective Sequence
Task. Methyl 4-oxocyclohex-2-ene-1-carboxylate carries an ester at C1, an enone C=C at C2–C3 and a ketone at C4. Convert it (i) into the allylic alcohol with the ester intact, (ii) into the saturated ketone, and see what the other common choices do.
| Goal | Choice | Reason |
|---|---|---|
| Allylic alcohol, ester untouched | NaBH₄/CeCl₃·7H₂O, MeOH, 0 °C | Luche: 1,2 regioselectivity; borohydride ignores the ester (chemoselectivity) |
| Saturated ketone, ester untouched | H₂, Pd/C (1 equiv) or L-Selectride (1,4) | C=C conjugated to C=O is hydrogenated before the ketone; esters are inert |
| Both C=O reduced | LiAlH₄ | no chemoselectivity: diol |
| Ester only reduced | protect the ketone as an ethylene acetal; LiAlH₄; deprotect | a protecting group supplies the chemoselectivity the reagent lacks |
Memory Tricks
Don’t Confuse
| This | Is not this |
|---|---|
| Chemoselective (different groups) | Regioselective (different positions of the same group) |
| Markovnikov (HX, oxymercuration, Wacker) | anti-Markovnikov (HBr/peroxide, hydroboration) |
| Epoxide + NaOMe/MeOH: attack at less substituted C | Epoxide + H⁺/MeOH: attack at more substituted C |
| Kinetic enolate (LDA, −78 °C): less substituted | Thermodynamic enolate (equilibrating): more substituted |
| 1,2-addition (RLi, Luche) | 1,4-addition (R₂CuLi, Michael donors) |
| Zaitsev (small base) | Hofmann (bulky base, NMe₃⁺) |
| Narasaka–Prasad: syn-1,3-diol | Evans–Saksena: anti-1,3-diol |
| Felkin–Anh: non-chelating | Chelation control: Lewis-acidic metal binds C=O and α-OR |
| Directed delivery (cis to OH) | Steric approach (anti to the bulky group) |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not taken from any CSIR NET paper. Use R = 8.314 J K⁻¹ mol⁻¹.
Level 1: Foundation
- 2-Methylcyclohexanone is treated with LDA in THF at −78 °C and then with CH₃I. Name the product.
- Which carbon of styrene oxide (2-phenyloxirane) is attacked by methanol under acid catalysis?
- Is the reduction of a ketone in the presence of an ester by NaBH₄ chemo-, regio- or stereoselective?
Answers
- 2,6-Dimethylcyclohexanone (kinetic enolate at the CH₂ side, C6).
- The benzylic carbon (C2, the more substituted, cation-stabilising position): product 2-methoxy-2-phenylethanol.
- Chemoselective.
Level 2: Part B Style
Practice Q1. 2,2-Dimethyloxirane is treated (I) with NaOMe in MeOH and (II) with MeOH containing catalytic H₂SO₄. The products are
(a) (I) 1-methoxy-2-methylpropan-2-ol; (II) 2-methoxy-2-methylpropan-1-ol (b) (I) 2-methoxy-2-methylpropan-1-ol; (II) 1-methoxy-2-methylpropan-2-ol (c) both give 1-methoxy-2-methylpropan-2-ol (d) both give 2-methoxy-2-methylpropan-1-ol
Answer: (a)
Methoxide attacks the less hindered CH₂ by SN2. Under acid catalysis the protonated epoxide opens at the tertiary carbon, which best stabilises the developing positive charge.
Practice Q2. Which reagent reduces the ring ketone of 3-(3-oxocyclohexyl)propanal selectively, leaving the aliphatic aldehyde (after work-up) intact?
(a) NaBH₄, EtOH, room temperature (b) NaBH(OAc)₃ (c) NaBH₄, CeCl₃·7H₂O, MeOH (d) LiAlH₄
Answer: (c)
Under Luche conditions the aldehyde is reversibly converted into a methanol adduct (hemiacetal/acetal) that borohydride does not reduce, and the ketone is reduced; work-up releases the aldehyde. (a) and (b) reduce the aldehyde preferentially; (d) reduces both.
Practice Q3. 1-Methylcyclohexene is treated with BH₃·THF and then H₂O₂/NaOH. The product is
(a) 1-methylcyclohexanol (b) cis-2-methylcyclohexanol (racemic) (c) trans-2-methylcyclohexanol (racemic) (d) cyclohexylmethanol
Answer: (c)
Boron adds to the less substituted ring carbon (anti-Markovnikov) and H to C1, syn. Oxidation replaces B with OH with retention. H and OH are therefore cis on the ring, which puts CH₃ and OH trans. Achiral reagents give the racemate. (a) is the Markovnikov product (oxymercuration).
Practice Q4. A β-hydroxy ketone is reduced (I) with Et₂BOMe then NaBH₄ at −78 °C, and (II) with Me₄NBH(OAc)₃ in AcOH/MeCN. Which statement is correct?
(a) (I) gives the syn-1,3-diol and (II) the anti-1,3-diol (b) both give the syn-diol (c) (I) gives the anti-diol and (II) the syn-diol (d) neither is diastereoselective
Answer: (a)
Narasaka–Prasad: the boron chelate is attacked by external hydride from the less hindered face, giving syn. Evans–Saksena: the hydroxyl exchanges onto the triacetoxyborohydride and delivers hydride intramolecularly, giving anti.
Level 3: Part C Style
Practice Q5. An equimolar mixture of benzaldehyde (A) and acetophenone (B), 1.00 mmol each, is treated at 25 °C with a deficit of NaBH₄. When the reaction stops, 20% of A and 80% of B remain.
Which statements are correct?
- \( k_A/k_B \) is about 7.2.
- The difference in free energy of activation is about 4.9 kJ mol⁻¹.
- If all four hydrides of each BH₄⁻ were used, 0.25 mmol of NaBH₄ was consumed.
- The product ratio (benzyl alcohol : 1-phenylethanol) equals \( k_A/k_B \).
(a) 1, 2 and 3 only (b) 1 and 2 only (c) 1, 2, 3 and 4 (d) 3 and 4 only
Answer: (a) 1, 2 and 3 only
- Correct. \( k_A/k_B = \ln 0.20/\ln 0.80 = (-1.609)/(-0.2231) = 7.21 \).
- Correct. \( \Delta\Delta G^\ddagger = RT\ln 7.21 = 8.314 \times 298.15 \times 1.976 = 4.90 \) kJ mol⁻¹.
- Correct. Hydride consumed = 0.80 (A) + 0.20 (B) = 1.00 mmol; 1.00/4 = 0.25 mmol BH₄⁻.
- Wrong. Products are 0.80 : 0.20 = 4 : 1, not 7.2 : 1. Product ratios equal rate-constant ratios only at very low conversion.
Practice Q6. A diastereoselective reduction gives 97 : 3 of two diastereomers at −78 °C (195.15 K). Assume kinetic control and a temperature-independent \( \Delta\Delta G^\ddagger \).
Which statements are correct?
- \( \Delta\Delta G^\ddagger \) is about 5.6 kJ mol⁻¹.
- At 25 °C (298.15 K) the ratio would be about 91 : 9.
- The de at −78 °C is 94%.
- Running the reaction at −100 °C would lower the selectivity.
(a) 1, 2 and 3 only (b) 1 and 3 only (c) 2 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- Correct. \( RT\ln(97/3) = 8.314 \times 195.15 \times \ln 32.33 = 8.314 \times 195.15 \times 3.476 = 5.64 \) kJ mol⁻¹.
- Correct. \( e^{5640/(8.314 \times 298.15)} = e^{2.275} = 9.73 \); fraction major = 9.73/10.73 = 0.907, about 91 : 9.
- Correct. de = 97 − 3 = 94%.
- Wrong. With a fixed \( \Delta\Delta G^\ddagger \), lowering T raises the ratio.
Practice Q7. Compound S is methyl (E)-6-oxohept-2-enoate, CH₃CO–CH₂CH₂–CH=CH–CO₂CH₃. Consider these single-step treatments: (I) NaBH₄, MeOH, 0 °C; (II) H₂ (1 equiv), Pd/C; (III) Me₂CuLi, then H₃O⁺; (IV) DIBAL-H (1 equiv), −78 °C.
Which statements are correct?
- (I) reduces mainly the ketone and leaves the unsaturated ester.
- (II) reduces mainly the C=C bond.
- (III) adds methyl to C3 (the β-carbon of the unsaturated ester).
- (IV) gives mainly the corresponding α,β-unsaturated aldehyde with the ketone untouched.
(a) 1, 2 and 3 only (b) 1 and 2 only (c) 1, 2, 3 and 4 (d) 2, 3 and 4 only
Answer: (a) 1, 2 and 3 only
- Correct. NaBH₄ reduces the isolated ketone much faster than the conjugated ester; esters are essentially inert to it.
- Correct. The conjugated C=C is hydrogenated over Pd before either carbonyl.
- Correct. Cuprates add 1,4 to α,β-unsaturated esters; the β-carbon is C3. (A cuprate also reacts only slowly with the isolated ketone.)
- Wrong. DIBAL-H reduces ketones readily even at −78 °C, so with one equivalent the isolated ketone competes strongly with the ester. In addition, DIBAL usually takes α,β-unsaturated esters on to the allylic alcohol rather than stopping cleanly at the enal. Protect the ketone (as an acetal) first, and expect to use the allylic alcohol plus an oxidation (MnO₂) to reach the enal.
Quick Revision Table
| Selectivity | Reagent / condition | Outcome |
|---|---|---|
| Chemo | NaBH₄ | ketone/aldehyde over ester, acid, amide |
| Chemo | BH₃·THF | acid over ester |
| Chemo | NaBH(OAc)₃, NaBH₃CN | aldehyde/iminium over ketone |
| Chemo | Luche | ketone over aldehyde; enone 1,2 |
| Chemo | MnO₂; TEMPO | allylic OH; primary OH |
| Chemo | mCPBA vs H₂O₂/NaOH | electron-rich C=C vs enone |
| Chemo | Lindlar; Wilkinson; 9-BBN | alkyne; least hindered alkene |
| Chemo | organozinc, organoboron | tolerate esters, nitriles |
| Regio | HX, oxymercuration, Wacker | Markovnikov |
| Regio | HBr/ROOR, hydroboration | anti-Markovnikov |
| Regio | epoxide + strong Nu (basic) | less substituted C |
| Regio | epoxide + H⁺ | more substituted C |
| Regio | cyclohexene oxide | trans-diaxial (Fürst–Plattner) |
| Regio | LDA, −78 °C / equilibrating | less / more substituted enolate |
| Regio | RLi, Luche / R₂CuLi, Michael | 1,2 / 1,4 |
| Regio | small base / bulky base | Zaitsev / Hofmann |
| Regio | DoM (amide, OMe, carbamate + BuLi) | ortho-lithiation |
| Stereo | small / bulky hydride on cyclohexanone | equatorial OH / axial OH |
| Stereo | Narasaka–Prasad / Evans–Saksena | syn / anti 1,3-diol |
| Stereo | Henbest, VO(acac)₂, Simmons–Smith, Crabtree | cis to OH |
| Stereo | Zimmerman–Traxler | Z → syn, E → anti |
| Numbers | \( \Delta\Delta G^\ddagger = RT\ln(\text{ratio}) \); competition \( k_A/k_B = \ln f_A/\ln f_B \) | 5.7 kJ mol⁻¹ per factor 10 at 298 K |
Key Takeaways
What’s Next
- Organic Transformations and Reagents: Quick Revision: the whole unit on one page.
- Asymmetric Induction and Asymmetric Synthesis: Felkin–Anh, chelation, auxiliaries and catalysts in depth.
- Carbonyl Condensations and Enolate Named Reactions: regio- and stereoselective C–C bond formation with enolates.
- Back to Functional Group Interconversion to plan full sequences.