Skip to content

Oxidations: Alcohols, Alkenes, C–H Bonds and Baeyer–Villiger

CSIR NET organic oxidations: Cr(VI), Swern, DMP, TPAP, TEMPO, MnO₂, Pinnick; epoxidation, OsO₄, ozonolysis, periodate, SeO₂, Baeyer–Villiger, Wacker, sulfur.

  • 16 min read
  • Updated
On this page · 16 sections
  1. Prerequisites
  2. The Hook: Why Jones Overshoots and PCC Does Not
  3. Alcohols to Aldehydes, Ketones and Acids
  4. Alkene Oxidations
  5. Wacker Oxidation
  6. Allylic, Benzylic and α-Carbonyl C–H Oxidation
  7. Baeyer–Villiger Oxidation
  8. Heteroatom and Enolate Oxidations
  9. Counting Electrons in an Oxidation
  10. Memory Tricks
  11. Don’t Confuse
  12. Common Mistakes
  13. Practice
  14. Quick Revision Table
  15. Key Takeaways
  16. What’s Next

Prerequisites

The Hook: Why Jones Overshoots and PCC Does Not

Alcohols to Aldehydes, Ketones and Acids

The reagent table

ReagentPrimary alcohol givesSecondary alcohol givesConditions and selectivity
Jones (CrO₃, H₂SO₄, acetone/H₂O)carboxylic acidketonestrongly acidic; acid-labile groups suffer
Collins (CrO₃·2pyridine, CH₂Cl₂)aldehydeketoneanhydrous; large excess needed
PCC (pyridinium chlorochromate, CH₂Cl₂)aldehydeketonemildly acidic (buffer with NaOAc)
PDC (pyridinium dichromate)aldehyde in CH₂Cl₂; acid in DMFketonesolvent switches the outcome
Swern (DMSO, (COCl)₂, −78 °C; then Et₃N)aldehydeketonemetal-free; by-products Me₂S, CO, CO₂, Et₃NH⁺Cl⁻
Parikh–Doering (SO₃·pyridine, DMSO, Et₃N)aldehydeketoneDMSO activation near 0 °C to room temperature
Pfitzner–Moffatt (DMSO, DCC, H⁺ source)aldehydeketonethe first activated-DMSO method; urea by-product
Dess–Martin periodinane (DMP, CH₂Cl₂, room temperature)aldehydeketoneneutral, fast; I(V) reagent
IBX (2-iodoxybenzoic acid, DMSO or hot EtOAc)aldehydeketoneI(V); poorly soluble in most solvents
TPAP / NMO (Ley–Griffith)aldehydeketonecatalytic Ru(VII); NMO is the stoichiometric oxidant
TEMPO, NaOCl, KBr (Anelli)aldehyde (acid if over-oxidised)slowoxoammonium ion; primary much faster than secondary
MnO₂ (activated)aldehyde, only if allylic, benzylic or propargylicketone, same restrictionheterogeneous; ignores saturated alcohols
Oppenauer (Al(OiPr)₃ or Al(OtBu)₃, acetone)rarely usedketonereverse of Meerwein–Ponndorf–Verley; hydride transfer to acetone; equilibrium
KMnO₄ (basic, warm)acidketone (may cleave)harsh

Aldehyde to carboxylic acid

ReagentComment
Pinnick (NaClO₂, NaH₂PO₄, tBuOH/H₂O, 2-methyl-2-butene)chlorous acid oxidises the aldehyde; the alkene scavenges the HOCl formed, which would otherwise chlorinate alkenes or consume chlorite. Tolerates α,β-unsaturation
Tollens (Ag(NH₃)₂⁺)silver mirror; the test for aldehydes
Jones, KMnO₄effective but unselective
Oxone, H₂O₂various

Alkene Oxidations

Epoxidation

ReagentSubstrate preferenceStereochemistry
Peracids (mCPBA, peracetic acid; Prilezhaev)electron-rich alkenes react faster (more alkyl groups = faster)syn, concerted (“butterfly” transition state): cis-alkene → cis-epoxide
mCPBA on an allylic or homoallylic alcohol (Henbest)hydroxyl directs by H-bondingepoxide cis to the OH
VO(acac)₂, tBuOOHallylic alcohols, very selective over isolated alkenescis to the OH; can epoxidise the allylic alkene in the presence of a more electron-rich isolated one
Ti(OiPr)₄, (+)- or (−)-diethyl tartrate, tBuOOH (Sharpless)allylic alcohols onlyenantioselective; face set by the tartrate
H₂O₂ or tBuOOH, NaOH (Weitz–Scheffer)electron-poor alkenes (enones)nucleophilic conjugate addition, then ring closure; stepwise
Dimethyldioxirane (DMDO)broad; neutralsyn; acetone is the only by-product
Mn(salen) (Jacobsen), NaOClunfunctionalised cis-alkenesenantioselective
Chiral fructose-derived ketone + Oxone (Shi)trans- and trisubstituted alkenesenantioselective, via a chiral dioxirane

Dihydroxylation

ReagentModeProduct from (E)-2-butene
OsO₄ (catalytic) with NMO (Upjohn) or K₃Fe(CN)₆syn, via an osmate ester(±)-butane-2,3-diol
KMnO₄, cold, dilute, basicsyn, via a manganate ester(±)-diol (yields lower; over-oxidation)
mCPBA, then H₃O⁺anti (syn epoxidation + backside opening)meso diol
I₂, AgOBz, anhydrous (Prévost)antimeso diol (after hydrolysis of the dibenzoate)
I₂, AgOAc, wet AcOH (Woodward)syn(±)-diol
AD-mix-α or AD-mix-β (Sharpless asymmetric dihydroxylation)syn, enantioselectiveone enantiomer of the (R,R)/(S,S) diol

Prévost and Woodward share an iodonium ion and a cyclic acetoxonium (dioxolanylium) intermediate. Under anhydrous conditions a second carboxylate opens it from the back (anti overall); with water present, the acetoxonium ion is hydrolysed to a monoester without breaking the C–O bonds to the ring carbons (syn overall).

Oxidative cleavage

ReagentC=C becomesNotes
O₃, then Me₂S, PPh₃ or Zn/AcOH (reductive work-up)aldehydes and/or ketones=CH₂ gives formaldehyde
O₃, then NaBH₄alcohols
O₃, then H₂O₂ (oxidative work-up)carboxylic acids and/or ketones=CH₂ gives CO₂/formic acid
OsO₄ (cat.), NaIO₄ (Lemieux–Johnson)aldehydes and/or ketonesdiol formed, then cleaved in the same pot
KMnO₄ (cat.), NaIO₄ (Lemieux–von Rudloff)acids and/or ketones
KMnO₄, hot, concentratedacids and/or ketones; terminal =CH₂ → CO₂

Ozonolysis proceeds by a 1,3-dipolar cycloaddition (molozonide, a 1,2,3-trioxolane), retro-cycloaddition to a carbonyl and a carbonyl oxide, and recombination to the ozonide (1,2,4-trioxolane) (the Criegee mechanism). The work-up decides the final oxidation level.

1,2-Diol cleavage

ReagentNotes
NaIO₄ or HIO₄ (Malaprade)aqueous; via a cyclic periodate ester, so cis-1,2-diols react much faster than trans; rigid trans-diaxial diols may not react
Pb(OAc)₄ (Criegee)organic solvents; can cleave trans-diols through an acyclic pathway

Periodate bookkeeping (classic Part C): each bond between two adjacent carbons both bearing OH (or OH and C=O) consumes one IO₄⁻.

  • A terminal CH₂OH next to CHOH becomes HCHO.
  • An internal CHOH flanked on both sides by CHOH becomes HCOOH.
  • An alditol with n carbons consumes n − 1 IO₄⁻ and gives 2 HCHO and n − 2 HCOOH. Glycerol (n = 3): 2 IO₄⁻, 2 HCHO, 1 HCOOH.

Wacker Oxidation

Wacker (Tsuji–Wacker) oxidation

R–CH=CH₂ + ½ O₂ → R–CO–CH₃ (PdCl₂ catalytic, CuCl₂ co-catalyst, O₂, aqueous DMF).

Pd(II) activates the alkene; water attacks the more substituted carbon (Markovnikov); β-hydride elimination and tautomerisation give the methyl ketone and Pd(0). Cu(II) reoxidises Pd(0) to Pd(II), and O₂ reoxidises Cu(I). The industrial version converts ethylene into acetaldehyde.

Terminal alkenes give methyl ketones, not aldehydes: a useful contrast with hydroboration–oxidation (anti-Markovnikov alcohol) and with hydroformylation. The full catalytic cycle is drawn on the homogeneous catalysis page.

Allylic, Benzylic and α-Carbonyl C–H Oxidation

ReagentTransformationNotes
SeO₂ (Riley), often with tBuOOHalkene → allylic alcohol (or enone/enal)ene reaction with Se=O, then [2,3]-sigmatropic shift; double bond position retained in the product
SeO₂ on a ketoneR–CO–CH₂R′ → R–CO–CO–R′α-methylene → 1,2-dicarbonyl
KMnO₄ or Na₂Cr₂O₇/H₂SO₄ on an alkylareneAr–CH₂R → ArCOOHneeds at least one benzylic H; tert-butylbenzene resists; whole side chain lost
CrO₂Cl₂ (Étard)ArCH₃ → ArCHOstops at the aldehyde
DDQdehydrogenation (aromatisation of hydroaromatics); oxidative removal of p-methoxybenzyl (PMB) ethershigh-potential quinone; hydride abstraction
NBS, light or initiatorallylic or benzylic C–H → C–Brradical chain (Wohl–Ziegler); low Br₂ concentration avoids addition

Baeyer–Villiger Oxidation

Baeyer–Villiger oxidation

Ketone + peracid (mCPBA, CF₃CO₃H) → ester; cyclic ketone → lactone (one ring atom larger).

The peracid adds to C=O (the Criegee intermediate); one group migrates from carbon to the adjacent oxygen as carboxylate leaves. The migrating group moves with retention of configuration, and the group best able to stabilise partial positive charge migrates.

Migratory aptitude (commonly given order):

$$\text{H} > 3^\circ\text{ alkyl} > \text{cyclohexyl} \approx 2^\circ\text{ alkyl} \approx \text{benzyl} \approx \text{phenyl} > 1^\circ\text{ alkyl} > \text{methyl}$$
KetoneProduct
Acetophenonephenyl acetate (Ph migrates, not CH₃)
Pinacolone (tBuCOCH₃)tert-butyl acetate
Cyclohexanoneε-caprolactone (oxepan-2-one)
2-Methylcyclohexanone7-methyloxepan-2-one: O is inserted on the more substituted side
Aldehyde RCHOcarboxylic acid (H migrates); electron-rich aryl aldehydes can give formate esters instead

Heteroatom and Enolate Oxidations

SubstrateReagentProductUse
Sulfide R₂SNaIO₄, or 1 equiv mCPBA at low temperaturesulfoxidestop at one oxygen
Sulfide R₂Sexcess mCPBA, Oxone, H₂O₂/catalystsulfoneJulia olefination precursors
Tertiary amineH₂O₂ or mCPBAamine N-oxideCope elimination on heating (syn)
α-Phenylselanyl carbonylH₂O₂ or NaIO₄selenoxide → α,β-unsaturated carbonylsyn elimination at or below room temperature
Silyl enol ethermCPBA (Rubottom)α-hydroxy ketonevia epoxidation of the enol ether
EnolateDavis oxaziridineα-hydroxy carbonylelectrophilic O transfer
Alkyl halide or tosylateDMSO, base (Kornblum)aldehydealkoxysulfonium then elimination

Counting Electrons in an Oxidation

Every oxidation is a redox reaction with a stoichiometry you can derive by counting electrons.

  • Alcohol → aldehyde or ketone: 2 e⁻. Alcohol → acid (primary): 4 e⁻.
  • Cr(VI) → Cr(III): 3 e⁻ per Cr. So 3 R₂CHOH need 2 CrO₃:
$$3\,\text{R}_2\text{CHOH} + 2\,\text{CrO}_3 + 3\,\text{H}_2\text{SO}_4 \rightarrow 3\,\text{R}_2\text{C=O} + \text{Cr}_2(\text{SO}_4)_3 + 6\,\text{H}_2\text{O}$$
  • Chlorite (Cl +3) → HOCl (Cl +1) in the Pinnick reaction: 2 e⁻, matching aldehyde → acid.
  • IO₄⁻ (I +7) → IO₃⁻ (I +5): 2 e⁻ per C–C cleavage of a 1,2-diol.

Memory Tricks

Don’t Confuse

ThisIs not this
PCC in CH₂Cl₂: RCH₂OH → RCHOJones: RCH₂OH → RCOOH
PDC in CH₂Cl₂: aldehydePDC in DMF: acid
mCPBA (electrophilic): electron-rich C=CH₂O₂/NaOH (nucleophilic): enone C=C
OsO₄ or Woodward: syn diolEpoxide + H₃O⁺ or Prévost: anti diol
O₃ / Me₂S: aldehydesO₃ / H₂O₂: acids
Wacker: terminal alkene → methyl ketoneHydroboration–oxidation: terminal alkene → primary alcohol
SeO₂ on an alkene: allylic alcoholSeO₂ on a ketone: 1,2-dicarbonyl
Baeyer–Villiger on a ketone: esterDakin on a hydroxy aryl aldehyde: phenol (via formate)
NaIO₄: cis-diols fast, aqueousPb(OAc)₄: organic solvent, cleaves trans-diols too

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not taken from any CSIR NET paper. Molar mass of CrO₃: 99.99 g mol⁻¹.

Level 1: Foundation

  1. Which reagent oxidises geraniol (an allylic primary alcohol) to geranial without touching a saturated primary alcohol elsewhere in the same molecule?
  2. What is the product of cyclohexanone with mCPBA?
  3. How many equivalents of NaIO₄ does glycerol consume?
Answers
  1. Activated MnO₂.
  2. ε-Caprolactone (oxepan-2-one), by Baeyer–Villiger oxidation.
  3. Two: C1–C2 and C2–C3 cleavages, giving 2 HCHO and 1 HCOOH.

Level 2: Part B Style

Practice Q1. 4-Phenylbutan-1-ol is treated with PDC in DMF. The major product is

(a) 4-phenylbutanal (b) 4-phenylbutanoic acid (c) benzoic acid (d) 4-phenylbutan-2-one

Answer: (b)

PDC in DMF oxidises primary alcohols to carboxylic acids; in CH₂Cl₂ it stops at the aldehyde (a). PDC does not cleave the side chain (c), which needs hot KMnO₄, and cannot move the oxygen (d).

Practice Q2. Which reagent converts (E)-hex-3-ene into meso-hexane-3,4-diol?

(a) OsO₄ (cat.), NMO (b) cold dilute alkaline KMnO₄ (c) I₂, AgOAc, wet acetic acid, then KOH (d) mCPBA, then H₃O⁺

Answer: (d)

Net anti addition to an E alkene gives the meso diol. Syn epoxidation followed by backside opening of the epoxide is anti overall. (a), (b) and (c) (Woodward) are all syn and give the racemic (3R,4R)/(3S,4S) diol.

Practice Q3. 2,2-Dimethylcyclopentanone is treated with trifluoroperacetic acid. The major product is

(a) 3,3-dimethyloxan-2-one (b) 6,6-dimethyloxan-2-one (c) 2,2-dimethylcyclopentanol (d) 5,5-dimethyloxolan-2-one

Answer: (b)

Baeyer–Villiger: the quaternary (tertiary alkyl) carbon migrates in preference to the CH₂, so oxygen is inserted between C=O and C(CH₃)₂. The six-membered lactone has the gem-dimethyl carbon attached to the ring oxygen: 6,6-dimethyloxan-2-one (δ-lactone, ring size five → six). (a) is the product of CH₂ migration. (d) has the wrong ring size.

Practice Q4. A compound C₈H₁₄ absorbs one equivalent of H₂ over Pd/C. Ozonolysis followed by Me₂S gives a single compound, C₈H₁₄O₂, which gives a positive iodoform test. The compound is

(a) oct-4-ene (b) 1,2-dimethylcyclohexene (c) 1,2-dimethylcyclohexane (d) 3,4-dimethylcyclohexene

Answer: (b)

C₈H₁₄ has two degrees of unsaturation; one H₂ uptake means one C=C and one ring. A single product containing all eight carbons confirms a ring C=C. 1,2-Dimethylcyclohexene gives CH₃CO(CH₂)₄COCH₃ (octane-2,7-dione), a bis(methyl ketone) (iodoform positive). (d) would give a dialdehyde (iodoform negative); (a) is C₈H₁₆; (c) has no C=C.

Level 3: Part C Style

Practice Q5. A chemist must oxidise 15.0 mmol of cholestan-3β-ol (a secondary alcohol) to the ketone with Jones reagent. In a separate experiment, 1.00 mmol of an unknown acyclic alditol consumes 5.00 mmol of NaIO₄ and liberates 4.00 mmol of formic acid and 2.00 mmol of formaldehyde.

Which statements are correct?

  1. The minimum amount of CrO₃ needed for the Jones oxidation is about 1.00 g.
  2. Each chromium atom accepts three electrons in this oxidation.
  3. The alditol has six carbon atoms.
  4. The alditol could be glycerol.

(a) 1, 2 and 3 only (b) 1 and 3 only (c) 2 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  1. Correct. Each alcohol loses 2 e⁻; each Cr(VI) gains 3 e⁻. So n(CrO₃) = (2/3) × 15.0 = 10.0 mmol = 10.0 × 99.99 mg = 1.000 g.
  2. Correct. Cr(VI) → Cr(III).
  3. Correct. An n-carbon alditol consumes n − 1 IO₄⁻ and gives 2 HCHO and n − 2 HCOOH: n − 1 = 5 and n − 2 = 4 both give n = 6 (a hexitol such as D-glucitol or D-mannitol).
  4. Wrong. Glycerol (n = 3) would consume 2 IO₄⁻ and give 1 HCOOH.

Practice Q6. Methyl α-D-glucopyranoside (P) and methyl α-D-glucofuranoside (F) are each treated with excess NaIO₄.

Which statements are correct?

  1. P consumes 2 equivalents of IO₄⁻ and releases 1 equivalent of HCOOH.
  2. F consumes 2 equivalents of IO₄⁻ and releases 1 equivalent of HCHO.
  3. P and F can be distinguished by the one-carbon product formed.
  4. F releases formic acid from C3.

(a) 1, 2 and 3 only (b) 1 and 3 only (c) 2 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  • P (pyranoside): free OH at C2, C3, C4 and C6; ring O links C1 and C5. Adjacent diol bonds: C2–C3 and C3–C4, so 2 IO₄⁻; C3, flanked by two cleaved bonds, leaves as HCOOH. The C6 primary OH is next to C5, which carries the ring oxygen as an ether, so it is not cleaved.
  • F (furanoside): ring O links C1 and C4; free OH at C2, C3, C5 and C6. Adjacent diol bonds: C2–C3 and C5–C6, so 2 IO₄⁻; C6 leaves as HCHO. No carbon is flanked by two cleavages, so no HCOOH.

1, 2 and 3 are correct (HCOOH versus HCHO distinguishes them). 4 is wrong: in F, C3 is bonded to C4, which carries no free OH, so C3 becomes an aldehyde carbon in the fragment, not formic acid.

Practice Q7. Consider the sequence: cyclohexene → (i) O₃, CH₂Cl₂, −78 °C; (ii) work-up W → product X.

Which statements are correct?

  1. With W = Me₂S, X is hexanedial.
  2. With W = H₂O₂, X is adipic acid (hexanedioic acid).
  3. With W = NaBH₄, X is hexane-1,6-diol.
  4. The OsO₄ (cat.)/NaIO₄ combination would give the same X as W = H₂O₂.

(a) 1, 2 and 3 only (b) 1 and 2 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only

Cyclohexene contains a C=C between two CH carbons in a six-membered ring, so cleavage gives a six-carbon chain with both ends oxygenated.

  1. Correct. Reductive work-up: OHC(CH₂)₄CHO.
  2. Correct. Oxidative work-up: HOOC(CH₂)₄COOH.
  3. Correct. Borohydride reduces the ozonide (or the aldehydes) to the diol.
  4. Wrong. Lemieux–Johnson gives the dialdehyde, like statement 1, not the diacid.

Quick Revision Table

GoalReagent(s)
1° alcohol → aldehydePCC, Collins, PDC/CH₂Cl₂, Swern, Parikh–Doering, DMP, IBX, TPAP/NMO, TEMPO/NaOCl
1° alcohol → acidJones, PDC/DMF, KMnO₄; or aldehyde then Pinnick
2° alcohol → ketoneall of the above; Oppenauer
Allylic/benzylic alcohol onlyMnO₂
1° over 2° alcoholTEMPO
Aldehyde → acid (alkene-tolerant)Pinnick: NaClO₂, NaH₂PO₄, 2-methyl-2-butene
EpoxidemCPBA (electron-rich alkene); H₂O₂/NaOH (enone); VO(acac)₂/TBHP (allylic alcohol); Sharpless, Jacobsen, Shi (asymmetric)
Syn diolOsO₄/NMO, cold KMnO₄, Woodward, AD-mix
Anti diolepoxide + H₃O⁺, Prévost
C=C cleavage to C=OO₃/Me₂S, OsO₄–NaIO₄
C=C cleavage to COOHO₃/H₂O₂, KMnO₄–NaIO₄, hot KMnO₄
Diol cleavageNaIO₄ (cis fast), Pb(OAc)₄
Terminal alkene → methyl ketoneWacker (PdCl₂, CuCl₂, O₂)
Allylic C–H → C–OHSeO₂ (+ TBHP)
α-CH₂ of ketone → C=OSeO₂
ArCH₂R → ArCOOHKMnO₄ (needs benzylic H)
Ketone → ester / lactoneBaeyer–Villiger; 3° > 2° ≈ Ph > 1° > Me; retention
Sulfide → sulfoxide / sulfoneNaIO₄ / excess mCPBA

Key Takeaways

What’s Next