Skip to content

Organic Transformations and Reagents Formula Sheet and Short Notes

One-page CSIR NET revision of organic reagents: FGI, oxidants, reductants, organometallics, organocatalysts, enzymes, selectivity rules and key numbers.

  • 7 min read
  • Updated
On this page · 6 sections
  1. Oxidation levels and FGI
  2. Oxidations
  3. Reductions
  4. Reagent families and catalysts
  5. Selectivity
  6. Related

Every reagent, rule and number from Functional Group Interconversion, Oxidations, Reductions, Reagents and Catalysts and Chemo-, Regio- and Stereoselective Transformations, on one page.

Oxidation levels and FGI

LevelGroups
0alkane
1ROH, RX, ROTs, RNH₂, ether; alkene
2aldehyde, ketone, acetal, imine, gem-dihalide; alkyne
3acid, ester, amide, acid chloride, nitrile, orthoester
4CO₂, carbonate, urea, isocyanate
  • Same level: substitution, hydrolysis, addition. Different level: redox reagent.
  • Retention: TsCl, MsCl, Tf₂O; SOCl₂ alone (SNi); Hofmann/Curtius/Schmidt/Lossen; hydroboration C–B → C–OH.
  • Inversion: PBr₃, Appel, SOCl₂/pyridine, Finkelstein, any SN2, Mitsunobu (PPh₃, DEAD/DIAD, acidic H–Nu; 1° and 2° only).
  • Carbon count: CN⁻ +1; acetylide +2; Corey–Fuchs and Ohira–Bestmann +1 (RCHO → RC≡CH); Arndt–Eistert +1; Hofmann/Curtius −1.
  • Acyl reactivity: RCOCl > (RCO)₂O > RCOSR > RCOOR ≈ RCOOH > RCONR₂ > RCOO⁻.
  • Activation: SOCl₂ or (COCl)₂/DMF; DCC/DMAP (Steglich); Yamaguchi (macrolactones); EDC/HOBt, HATU (amides).
  • Weinreb amide + RMgX → ketone; + LiAlH₄/DIBAL → aldehyde. Nitrile + RMgX → ketone. Ester + 2 RMgX → 3° alcohol. R₂CuLi + RCOCl → ketone.
  • Amines: Gabriel (1° only), azide reduction (H₂/Pd, LiAlH₄, Staudinger), reductive amination (NaBH₃CN, NaBH(OAc)₃), LiAlH₄ on amides (same C) and nitriles (RCH₂NH₂).
  • Diazonium: CuCl/CuBr/CuCN (Sandmeyer), KI, HBF₄ (Balz–Schiemann), H₂O (phenol), H₃PO₂ (→ H).
  • Syn eliminations: Burgess, Chugaev, Cope, selenoxide (Grieco).

Oxidations

GoalReagent
1° ROH → RCHOPCC, Collins, PDC (CH₂Cl₂), Swern, Parikh–Doering, DMP, IBX, TPAP/NMO, TEMPO/NaOCl
1° ROH → RCOOHJones, PDC (DMF), KMnO₄; aldehyde then Pinnick
2° ROH → ketoneall of the above; Oppenauer
Allylic/benzylic OH onlyMnO₂
1° over 2° OHTEMPO
RCHO → RCOOH, alkene-tolerantNaClO₂, NaH₂PO₄, 2-methyl-2-butene (Pinnick)
Electron-rich C=C → epoxidemCPBA (syn; Henbest cis to OH)
Enone C=C → epoxideH₂O₂ or TBHP, NaOH (Weitz–Scheffer)
Allylic alcohol → epoxideVO(acac)₂/TBHP; Sharpless (Ti, DET, TBHP)
Syn diolOsO₄/NMO, cold KMnO₄, Woodward (I₂, AgOAc, wet AcOH), AD-mix
Anti diolepoxide + H₃O⁺, Prévost (I₂, AgOBz, dry)
C=C → 2 C=OO₃ then Me₂S/PPh₃/Zn; OsO₄–NaIO₄
C=C → COOHO₃ then H₂O₂; KMnO₄–NaIO₄; hot KMnO₄
1,2-Diol cleavageNaIO₄ (cis faster), Pb(OAc)₄
RCH=CH₂ → RCOCH₃Wacker (PdCl₂, CuCl₂, O₂, H₂O)
Allylic C–H → C–OH; ketone α-CH₂ → C=OSeO₂
ArCH₂R → ArCOOHKMnO₄ (needs benzylic H)
ArCH₃ → ArCHOCrO₂Cl₂ (Étard)
Dehydrogenation, PMB removalDDQ
Ketone → ester/lactoneBaeyer–Villiger (mCPBA, CF₃CO₃H)
R₂S → sulfoxide / sulfoneNaIO₄ / excess mCPBA
Silyl enol ether → α-OH ketonemCPBA (Rubottom)
  • Baeyer–Villiger: H > 3° > 2° ≈ cyclohexyl ≈ benzyl ≈ Ph > 1° > Me; retention; 2-methylcyclohexanone → O next to CHCH₃.
  • Electrons: ROH → C=O 2 e⁻; 1° ROH → RCOOH 4 e⁻; Cr(VI) → Cr(III) 3 e⁻, so 3 ROH : 2 CrO₃.
  • Periodate: one IO₄⁻ per adjacent oxygenated C–C bond; n-carbon alditol → n − 1 IO₄⁻, 2 HCHO, n − 2 HCOOH; glycerol 2, 2, 1. Methyl glucopyranoside 2 IO₄⁻ + HCOOH; methyl glucofuranoside 2 IO₄⁻ + HCHO.
  • Ozonolysis of a ring alkene gives one dicarbonyl molecule.

Reductions

ReagentReducesLeaves
LiAlH₄aldehyde, ketone, ester, acid, amide (→ amine), nitrile (→ RCH₂NH₂), epoxide, RXisolated C=C
NaBH₄aldehyde, ketone, acid chlorideester, acid, amide, nitrile, NO₂
LiBH₄+ esters, epoxidesacids, amides
BH₃·THFacids (fast), amides, aldehydes, ketones; hydroborates C=Cesters (slow)
DIBAL-H (1 equiv, −78 °C)ester → aldehyde, nitrile → aldehyde
LiAlH(OtBu)₃ (−78 °C)acid chloride → aldehyde
NaBH₃CN (pH 6–7), NaBH(OAc)₃iminium (reductive amination), aldehydes (NaBH(OAc)₃)ketones
Luche (NaBH₄/CeCl₃, MeOH)enone → allylic alcohol (1,2); ketone in presence of aldehyde
L-Selectridecyclohexanone → axial OH (equatorial attack)
Red-Alpropargylic alcohol → (E)-allylic alcohol
H₂, Pd/CC=C, C≡C, NO₂, N₃; hydrogenolysis of OBn, Cbzarenes, esters
Lindlar; P-2 Nialkyne → Z-alkene
Na or Li, NH₃(l)alkyne → E-alkene; Birch arene → 1,4-diene
Wilkinsonleast hindered C=CC=O, NO₂, hindered C=C
Crabtreehindered C=C, directed cis to OH
Diimidenon-polar C=C, C≡C (syn)C=O, C≡N, NO₂, OBn
Zn(Hg)/HCl; N₂H₄/KOH; thioacetal + Raney NiC=O → CH₂ (acid; base; neutral)
Bu₃SnH, AIBN on xanthateC–OH → C–H (Barton–McCombie)
Al(OiPr)₃, iPrOHketone → alcohol (MPV)C=C
Fe/HCl, Sn/HCl, SnCl₂ArNO₂ → ArNH₂(LiAlH₄ gives azo compounds)
PPh₃ then H₂ORN₃ → RNH₂ (Staudinger)
  • Nucleophilic hydrides (AlH₄⁻, BH₄⁻) hit the most electrophilic C=O; electrophilic ones (BH₃, DIBAL) hit the most Lewis-basic.
  • Birch: donors on the C=C, acceptors on the sp³ carbon; non-conjugated 1,4-diene.
  • Hydrogenation ease of alkenes: mono > di > tri > tetrasubstituted; syn, less hindered face.
  • LiAlH₄: 4 H⁻ per formula; 2 per ester → 0.5 LiAlH₄ per ester (stoichiometric minimum).
  • Rings = degree of unsaturation − mol H₂ absorbed per mol (22.414 L mol⁻¹ at 0 °C, 1 atm).

Reagent families and catalysts

  • TON = mol product / mol catalyst; TOF = TON / time. Catalysts never shift equilibria.
  • Kinetic resolution: \( c = ee_S/(ee_S + ee_P) \); \( E = \ln[1 - c(1 + ee_P)]/\ln[1 - c(1 - ee_P)] \); ≤ 50% of each enantiomer; DKR and desymmetrisation → up to 100%.
  • Organic: DCC/EDC, HOBt/HATU, DEAD/PPh₃, NBS, mCPBA, DMP, DDQ, Burgess, Lawesson’s, TMSCHN₂; DMAP (acyl transfer), DABCO (Baylis–Hillman).
  • Organocatalysts: proline (enamine, raises HOMO), MacMillan imidazolidinone (iminium, lowers LUMO), NHC/CN⁻ (umpolung: benzoin, Stetter), thioureas, chiral phosphoric acids, cinchona PTC, CBS, Shi ketone.
  • Inorganic: NaH (base only), LDA/HMDS (hindered bases), CrO₃, KMnO₄, OsO₄, RuO₄, MnO₂, SeO₂, NaIO₄, NaClO₂, Lewis acids (BF₃·OEt₂, TiCl₄, SnCl₄, AlCl₃; Sc(OTf)₃ water-tolerant), CeCl₃, SmI₂, fluoride (Si–F).
  • Organometallic ladder: RLi > RMgX > R₂Zn ≈ R₂CuLi > R₃B ≈ R₄Sn ≈ R₄Si. RLi/RMgX 1,2; R₂CuLi or RMgX/CuI 1,4.
  • Reformatsky (Zn, BrCH₂CO₂Et), Simmons–Smith (CH₂I₂, Zn–Cu), Tebbe/Petasis (C=O → C=CH₂, esters → enol ethers), RCeCl₂ (enolisable ketones), Sakurai (allylsilane + Lewis acid), Peterson (acid anti, base syn), Fleming–Tamao (C–Si → C–OH, retention).
  • Pd couplings: Suzuki B, Stille Sn, Negishi Zn, Kumada Mg, Hiyama Si, Sonogashira alkyne + Cu(I), Heck alkene, Buchwald–Hartwig C–N, Tsuji–Trost π-allyl. Cycle: oxidative addition → transmetalation → reductive elimination. ArI > ArBr ≈ ArOTf ≫ ArCl.
  • Grubbs/Schrock metathesis; Rh₂(OAc)₄ carbenoids; CuAAC → 1,4-triazole (Ru → 1,5).
  • Enzymes: lipases/esterases (KR, desymmetrisation; acyl donor vinyl acetate), ADH/KRED with NAD(P)H (Prelog: Re face → (S) when L outranks S), P450 (C–H hydroxylation), BVMO, arene dioxygenase (cis-diols), transaminases (PLP), aldolases, nitrilases. Recycle NAD(P)H with glucose/GDH, formate/FDH or iPrOH.
  • Baker’s yeast + ethyl acetoacetate → (S)-ethyl 3-hydroxybutanoate.

Selectivity

ChoiceRule
Ketone vs esterNaBH₄ → ketone
Acid vs esterBH₃ → acid
Aldehyde vs ketoneNaBH(OAc)₃ → aldehyde; Luche → ketone
Allylic vs saturated OHMnO₂ → allylic
Electron-rich C=C vs enonemCPBA → rich; H₂O₂/NaOH → enone
Alkyne vs alkeneLindlar → alkyne
HX / oxymercuration / WackerMarkovnikov
HBr + ROOR / hydroborationanti-Markovnikov
Epoxide + strong Nu (basic)less substituted C (SN2)
Epoxide + H⁺more substituted C; inversion
Cyclohexene oxidetrans-diaxial opening
LDA, −78 °Cless substituted (kinetic) enolate
Equilibrating base, warmmore substituted (thermodynamic) enolate
Enone + RLi, LiAlH₄, Luche1,2
Enone + R₂CuLi, Michael donors1,4
Small base / bulky baseZaitsev / Hofmann
Small hydride / bulky hydride on cyclohexanoneequatorial OH / axial OH
Narasaka–Prasad / Evans–Saksenasyn / anti 1,3-diol
mCPBA, VO(acac)₂, Simmons–Smith, Crabtree on allylic alcoholscis to OH
$$\frac{k_1}{k_2} = e^{\Delta\Delta G^\ddagger/RT}, \qquad \frac{k_A}{k_B} = \frac{\ln([A]/[A]_0)}{\ln([B]/[B]_0)}$$
  • 5.7 kJ mol⁻¹ per factor of 10 at 298 K; cooling raises the ratio for a fixed \( \Delta\Delta G^\ddagger \).
  • Product ratio = rate-constant ratio only at low conversion.
Advertisement
Advertisement