Organic, Inorganic, Organometallic and Enzymatic Reagents and Catalysts
CSIR NET reagent families: organic reagents, organocatalysts, inorganic oxidants and Lewis acids, organometallics (RLi to cuprates, Pd), enzymes, TON, TOF and E.
- 18 min
On this page · 15 sections
- Prerequisites
- The Hook: Four Ways to Reduce Acetophenone
- Reagent, Catalyst, Promoter: Definitions and Metrics
- Organic Reagents and Organocatalysts
- Inorganic Reagents
- Organometallic Reagents
- Enzymatic Reagents and Biocatalysts
- Choosing Among the Families
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Oxidations and Reductions: most of the inorganic reagents on this page first appear there.
- Homogeneous Catalysis by Organometallic Complexes: cross-coupling and metathesis cycles.
- Hard and Soft Acids and Bases: why cuprates add 1,4 and organolithiums 1,2.
- Enzymes: Catalysis, Kinetics, Regulation and Isozymes: enzyme classes and Michaelis–Menten behaviour, from the Life Sciences side.
The Hook: Four Ways to Reduce Acetophenone
Reagent, Catalyst, Promoter: Definitions and Metrics
- Reagent (stoichiometric): consumed in the reaction; at least one equivalent needed (NaBH₄, mCPBA, PPh₃ in a Wittig).
- Catalyst: increases the rate and is regenerated; used in sub-stoichiometric amount (mol%). It does not change the equilibrium constant.
- Promoter / additive: a stoichiometric species that changes rate or selectivity without being a true catalyst (CeCl₃ in a Luche reduction, LiCl in some cuprate or Stille reactions).
- Precatalyst: what goes into the flask; the active catalyst forms from it (Pd(OAc)₂ → Pd(0)L₂).
For a kinetic resolution with selectivity factor (enantiomeric ratio) E, conversion c, and ee of product \( ee_P \) and of remaining substrate \( ee_S \) (irreversible, first-order in each enantiomer):
$$c = \frac{ee_S}{ee_S + ee_P}, \qquad E = \frac{\ln[1 - c(1 + ee_P)]}{\ln[1 - c(1 - ee_P)]} = \frac{\ln[(1 - c)(1 - ee_S)]}{\ln[(1 - c)(1 + ee_S)]}$$A kinetic resolution can never give more than 50% of one enantiomer from a racemate. Dynamic kinetic resolution (DKR), in which the substrate enantiomers interconvert faster than the resolution step (for example a lipase acylation coupled with a Ru racemisation catalyst for secondary alcohols), can approach 100%. The general theory is on the asymmetric induction page.
Organic Reagents and Organocatalysts
Stoichiometric organic reagents
| Reagent | Role | Typical use |
|---|---|---|
| Et₃N, iPr₂NEt (Hünig’s base) | hindered amine bases; scavenge HX | acylations, sulfonylations, Swern |
| Pyridine, 2,6-lutidine | weak bases; pyridine also nucleophilic | TsCl, Tf₂O, TBSOTf reactions (2,6-lutidine is non-nucleophilic) |
| DBU, DBN | strong amidine bases, poorly nucleophilic | E2 eliminations, HWE |
| DCC, EDC (carbodiimides) | activate RCOOH as O-acylisourea | esters (Steglich), amides, Pfitzner–Moffatt |
| CDI (carbonyldiimidazole) | acyl imidazole formation | amides, esters, carbamates |
| HOBt, HATU | form active esters; suppress racemisation | peptide coupling |
| DEAD/DIAD + PPh₃ | Mitsunobu activation | SN2 with inversion |
| PPh₃ | O-acceptor (Ph₃P=O is the driving force) | Wittig, Appel, Staudinger, ozonide work-up |
| NBS, NCS, NIS | electrophilic or radical halogen source | allylic bromination, bromohydrins, α-halogenation |
| mCPBA, DMDO | electrophilic O transfer | epoxides, Baeyer–Villiger, N-oxides |
| DMP, IBX | hypervalent iodine oxidants | alcohol → carbonyl |
| DDQ, chloranil | hydride-abstracting quinones | dehydrogenation, PMB removal |
| NMO | stoichiometric co-oxidant | with OsO₄ or TPAP |
| Lawesson’s reagent | O → S exchange | thioketones, thioamides |
| Burgess reagent | syn dehydration | alcohol → alkene |
| TMSCHN₂, CH₂N₂ | methylation of acids; homologation | methyl esters, Arndt–Eistert |
| Boc₂O, CbzCl, TBSCl, TsCl, MsCl, Tf₂O | protecting and activating groups |
Nucleophilic catalysts
DMAP (4-dimethylaminopyridine) attacks an anhydride or acyl chloride faster than the alcohol does and forms an N-acylpyridinium ion, which is a far better acylating agent. A few mol% of DMAP accelerates acylation of hindered alcohols dramatically. DABCO and phosphines play a similar nucleophilic role in the Morita–Baylis–Hillman reaction (enone + aldehyde → α-methylene-β-hydroxy carbonyl).
Organocatalysts (small chiral organic molecules)
| Catalyst | Activation mode | Example reaction |
|---|---|---|
| L-Proline | enamine (with ketones/aldehydes as nucleophiles); the carboxylic acid directs the electrophile by H-bonding | intramolecular aldol to the Wieland–Miescher and Hajos–Parrish ketones; intermolecular aldol, Mannich, α-amination |
| MacMillan imidazolidinones | iminium ion (lowers the LUMO of enals) | Diels–Alder, Friedel–Crafts alkylation, conjugate additions |
| Diarylprolinol silyl ethers (Jørgensen–Hayashi) | enamine and iminium | α-functionalisation of aldehydes, Michael additions |
| N-Heterocyclic carbenes (thiazolium, triazolium) | umpolung via the Breslow intermediate (acyl anion equivalent) | benzoin condensation, Stetter reaction (aldehyde + Michael acceptor → 1,4-dicarbonyl) |
| Cyanide ion | umpolung (same logic, achiral) | benzoin condensation of aromatic aldehydes |
| Thioureas, squaramides | double H-bond donors (anion binding) | Michael, Strecker, Mannich |
| Chiral phosphoric acids (BINOL-derived) | Brønsted acid + counterion | imine reductions with Hantzsch ester, Mannich |
| Cinchona alkaloids and quaternary ammonium salts | base / phase-transfer catalysis | asymmetric alkylation of glycine imines, conjugate additions |
| CBS oxazaborolidine | Lewis acid (B) + Lewis base (N) bind ketone and BH₃ together | enantioselective ketone reduction |
| Shi fructose-derived ketone | chiral dioxirane | epoxidation with Oxone |
Inorganic Reagents
| Class | Reagents | Characteristic behaviour |
|---|---|---|
| Ionic hydrides | NaH, KH | strong, non-nucleophilic bases (H₂ evolved); not hydride donors to C=O |
| Complex hydrides | LiAlH₄, NaBH₄, NaBH₃CN, NaBH(OAc)₃ | nucleophilic hydride donors (see Reductions) |
| Metal amides | NaNH₂, LDA, LiHMDS, KHMDS | strong bases; LDA and the HMDS amides are hindered and non-nucleophilic (kinetic enolates) |
| Inorganic bases | K₂CO₃, Cs₂CO₃, NaOH, KOH | alkylations, ester hydrolysis, Suzuki couplings |
| High-valent oxides | CrO₃, KMnO₄, OsO₄, RuO₄, MnO₂, SeO₂ | oxidants; OsO₄ syn dihydroxylation; RuO₄ very strong (ethers → esters) |
| Oxyanions | NaIO₄, NaClO₂, NaOCl, Oxone (KHSO₅) | cleavage, Pinnick, TEMPO co-oxidant, dioxirane generation |
| Lead | Pb(OAc)₄ | diol cleavage, oxidative decarboxylation |
| Lewis acids | BF₃·OEt₂, AlCl₃, TiCl₄, SnCl₄, ZnCl₂, ZnBr₂, MgBr₂ | activate C=O, epoxides and acetals; chelation control (TiCl₄, MgBr₂) |
| Water-tolerant Lewis acids | Sc(OTf)₃, Yb(OTf)₃ and other lanthanide triflates | catalysis in aqueous media; recoverable |
| Lanthanide salts | CeCl₃ | Luche reduction; organocerium reagents |
| Alkali and other metals | Li, Na, K (NH₃); Mg; Zn; Zn–Cu; Zn(Hg) | dissolving-metal reductions, Grignard formation, Simmons–Smith, Clemmensen |
| Single-electron reductants | SmI₂ | ketyl couplings, deoxygenation of α-hetero carbonyls |
| Nucleophilic salts | NaN₃, NaCN, KF, CsF, TBAF (organic cation) | SN2; fluoride for desilylation (strong Si–F bond) |
| Heterogeneous metals | Pd/C, PtO₂, Raney Ni, Lindlar | hydrogenation, hydrogenolysis, desulfurisation |
Organometallic Reagents
Main-group organometallics: a reactivity ladder
$$\text{RLi} > \text{RMgX} > \text{R}_2\text{Zn} \approx \text{R}_2\text{CuLi} > \text{R}_3\text{B} \approx \text{R}_4\text{Sn} \approx \text{R}_4\text{Si}$$Reading left to right, the C–M bond becomes more covalent, the carbanion character, basicity and “hardness” fall, and functional-group tolerance rises.
| Reagent | Typical reactions | Notes |
|---|---|---|
| Organolithiums (n-BuLi, s-BuLi, t-BuLi, PhLi, MeLi) | 1,2-addition to C=O; deprotonation; halogen–lithium exchange; directed ortho-metalation | very basic; RCOOH + 2 RLi → ketone (via the dianion) |
| Grignard reagents RMgX | 1,2-addition to aldehydes, ketones, esters (twice), nitriles (ketone), epoxides (less hindered carbon), CO₂ (acid) | ether solvents; enolisation competes with hindered ketones |
| Organocerium RCeCl₂ (RLi + CeCl₃) | 1,2-addition to easily enolised ketones | less basic, still nucleophilic |
| Gilman cuprates R₂CuLi (2 RLi + CuI) | 1,4-addition to enones; SN2 on halides; SN2′ on allylic systems; acid chloride → ketone; epoxide opening | soft; only one R transferred; catalytic Cu with RMgX also gives 1,4 |
| Organozinc | Reformatsky (BrZnCH₂CO₂Et + C=O → β-hydroxy ester); Simmons–Smith (ICH₂ZnI, cyclopropanation); Negishi coupling; Et₂Zn additions with chiral amino alcohols | tolerate esters and nitriles |
| Organoboron | hydroboration; Suzuki–Miyaura coupling; allylboration | air-stable boronic acids, low toxicity |
| Organosilicon | TMSCN (cyanohydrin TMS ethers); Hosomi–Sakurai (allylsilane + Lewis acid + C=O, SE2′); Peterson olefination (acid: anti elimination; base: syn); Fleming–Tamao oxidation (C–Si → C–OH, retention) | β-silicon effect stabilises β-carbocations |
| Organotin | Bu₃SnH radical reductions; Stille coupling | toxic; tin residues hard to remove |
| Titanium carbenoids (Tebbe, Petasis) | methylenation of aldehydes, ketones, esters (→ enol ethers) and amides | Wittig fails on esters; Tebbe does not |
Transition-metal catalysts
| Catalyst type | Reaction | Bonds formed |
|---|---|---|
| Pd(0)/phosphine | Suzuki (ArB(OH)₂), Stille (ArSnR₃), Negishi (RZnX), Kumada (RMgX), Hiyama (ArSiR₃ + F⁻) | C(sp²)–C(sp²), C(sp²)–C(sp³) |
| Pd(0)/base | Heck (aryl halide + alkene) | C(sp²)–C(sp²), substituted alkene (usually E) |
| Pd(0)/Cu(I)/amine | Sonogashira (aryl halide + terminal alkyne) | C(sp²)–C(sp) |
| Pd(0)/bulky phosphine | Buchwald–Hartwig amination | C(aryl)–N |
| Pd(0) | Tsuji–Trost allylic substitution (via π-allyl Pd) | C–C, C–N, C–O at allylic carbon |
| Grubbs (Ru), Schrock (Mo, W) carbenes | olefin metathesis: RCM, cross-metathesis, ROMP | C=C (ethylene lost in RCM) |
| Rh₂(OAc)₄, Cu(I) | carbenoids from diazo compounds: cyclopropanation, C–H and X–H insertion | C–C |
| Cu(I) | CuAAC (“click”): azide + terminal alkyne → 1,4-disubstituted 1,2,3-triazole | C–N; Ru catalysts give the 1,5-isomer |
| Au(I), Pt(II) | π-activation of alkynes and allenes toward nucleophiles | C–O, C–N, C–C |
| Rh(I), Ru(II), Ir(I) + chiral ligands | asymmetric hydrogenation | C–H |
| Pd(II)/Cu(II)/O₂ | Wacker | C=O |
The common cycle for the cross-couplings is oxidative addition (Ar–X to Pd(0)), transmetalation (R from B, Sn, Zn, Mg or Si to Pd), reductive elimination (Ar–R released, Pd(0) regenerated). The Heck reaction replaces transmetalation by alkene insertion and β-hydride elimination. Aryl halide reactivity in oxidative addition: ArI > ArOTf ≈ ArBr ≫ ArCl.
Enzymatic Reagents and Biocatalysts
Enzymes are chiral catalysts that work in water, near room temperature and neutral pH, often with very high chemo-, regio- and enantioselectivity. They are classified by the EC system (oxidoreductases, transferases, hydrolases, lyases, isomerases, ligases and, since 2018, translocases); for synthesis the most used are hydrolases and oxidoreductases.
| Enzyme class (examples) | Cofactor | Synthetic use |
|---|---|---|
| Lipases (Candida antarctica lipase B, CALB; porcine pancreatic lipase) and esterases (pig liver esterase, PLE) | none | kinetic resolution of racemic alcohols and esters (acylation with vinyl acetate, or hydrolysis); desymmetrisation of meso diesters and diols; work in organic solvents too |
| Proteases (subtilisin, chymotrypsin) | none | ester and amide hydrolysis; amino-acid resolutions |
| Acylases | none | resolution of N-acyl amino acids (L-selective) |
| Alcohol dehydrogenases / ketoreductases (including baker’s yeast, Saccharomyces cerevisiae) | NAD(P)H | enantioselective ketone reduction; e.g. baker’s yeast reduces ethyl acetoacetate to (S)-ethyl 3-hydroxybutanoate |
| Cytochrome P450 monooxygenases | heme, O₂, NAD(P)H | hydroxylation of unactivated C–H, epoxidation |
| Baeyer–Villiger monooxygenases (cyclohexanone monooxygenase) | flavin, O₂, NADPH | enantioselective Baeyer–Villiger oxidation of prochiral cyclic ketones |
| Arene dioxygenases (toluene dioxygenase, in whole cells) | Fe, O₂, NADH | arene → cis-cyclohexadienediol (a chiral building block) |
| Transaminases | pyridoxal 5′-phosphate (PLP) | ketone → chiral primary amine (amine donor: alanine or isopropylamine) |
| Aldolases | none (class I: Schiff base with Lys) or Zn²⁺ (class II) | stereospecific C–C bond formation |
| Nitrilases, nitrile hydratases | — | nitrile → acid, nitrile → amide (acrylamide from acrylonitrile) |
| Epoxide hydrolases, haloalkane dehalogenases | — | enantioselective epoxide opening |
Cofactor recycling. NAD(P)H is expensive, so it is used catalytically and regenerated: glucose/glucose dehydrogenase, formate/formate dehydrogenase (CO₂ by-product drives the reaction), or isopropanol/the same ADH (acetone by-product). Whole cells (yeast, E. coli expressing the enzyme) recycle cofactors themselves.
Choosing Among the Families
| Task | Inorganic | Organic | Organometallic | Enzymatic |
|---|---|---|---|---|
| Ketone → alcohol | NaBH₄, LiAlH₄ | CBS/BH₃; Hantzsch ester + chiral acid (imines) | Ru–BINAP/H₂; Al(OiPr)₃ (MPV) | KRED/ADH, yeast |
| Alkene → epoxide | — (H₂O₂ for enones) | mCPBA, DMDO, Shi ketone | Ti tartrate (Sharpless), Mn salen (Jacobsen), VO(acac)₂ | P450, monooxygenases |
| Alcohol → carbonyl | CrO₃, MnO₂, NaOCl | Swern, DMP, TEMPO | TPAP | alcohol oxidases, laccase–TEMPO |
| C–C bond to C=O | KCN (cyanohydrin) | proline aldol, NHC benzoin | RLi, RMgX, R₂Zn, R₂CuLi (1,4) | aldolases, hydroxynitrile lyases |
| Ar–Ar bond | — | — | Pd (Suzuki, Stille, Negishi) | — |
| Racemate → one enantiomer | — | chiral acylation catalysts | Ru racemisation (DKR partner) | lipase kinetic resolution |
Memory Tricks
Don’t Confuse
| This | Is not this |
|---|---|
| DMAP: nucleophilic acyl-transfer catalyst | DIPEA, Et₃N: proton scavengers |
| NaH: base | NaBH₄: hydride donor to C=O |
| LDA: hindered base, kinetic enolate | n-BuLi: base and nucleophile |
| R₂CuLi: 1,4 to enones, ketones from acid chlorides | RMgX/RLi: 1,2; tertiary alcohols from esters |
| Reformatsky (Zn, α-bromoester) | Simmons–Smith (Zn–Cu, CH₂I₂) |
| Suzuki (boron) / Stille (tin) / Negishi (zinc) / Kumada (magnesium) | Heck (no organometallic partner; alkene) |
| Enamine catalysis (nucleophilic α-carbon) | Iminium catalysis (electrophilic β-carbon) |
| Kinetic resolution: ≤ 50% | Dynamic kinetic resolution / desymmetrisation: up to 100% |
| TON: total turnovers (dimensionless) | TOF: turnovers per unit time |
| CuAAC: 1,4-triazole | RuAAC: 1,5-triazole |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not taken from any CSIR NET paper.
Level 1: Foundation
- What is the role of DMAP in the acetylation of a tertiary alcohol with Ac₂O and Et₃N?
- Which organometallic reagent adds a methyl group to the β-carbon of cyclohex-2-enone?
- What is the maximum yield of one enantiomer of an alcohol obtainable by simple lipase kinetic resolution of the racemate?
Answers
- Nucleophilic catalyst: forms the N-acetylpyridinium ion, a stronger acylating agent than Ac₂O. Et₃N removes the acetic acid.
- Lithium dimethylcuprate, Me₂CuLi (or MeMgBr with catalytic Cu(I)).
- 50%.
Level 2: Part B Style
Practice Q1. Which reagent converts methyl benzoate into 1-methoxy-1-phenylethene (PhC(OMe)=CH₂)?
(a) Ph₃P=CH₂ (b) Tebbe reagent (c) CH₃MgBr, then H₃O⁺ (d) Me₂CuLi
Answer: (b)
The titanium methylidene from the Tebbe reagent methylenates esters, giving enol ethers. Phosphorus ylides react poorly or not at all with esters (a). Grignard (c) gives the tertiary alcohol 2-phenylpropan-2-ol. Cuprates (d) do not react usefully with esters.
Practice Q2. Benzaldehyde and methyl vinyl ketone are combined with a thiazolium salt and Et₃N. The product is
(a) 1-phenylpentane-1,4-dione (b) 4-hydroxy-4-phenylbutan-2-one (c) benzoin (d) 3-benzylidene-butan-2-one
Answer: (a)
The NHC (from the thiazolium salt and base) adds to benzaldehyde and, after proton transfer, forms the Breslow intermediate, an acyl anion equivalent. This adds 1,4 to methyl vinyl ketone (Stetter reaction): PhCO–CH₂CH₂–COCH₃, a 1,4-dicarbonyl. (b) is an aldol product; (c) would form without the Michael acceptor; (d) is a condensation product.
Practice Q3. Which statement about L-proline catalysis is correct?
(a) Proline activates enals as iminium ions for Diels–Alder reactions only (b) Proline forms an enamine with a ketone donor, and its carboxylic acid directs the aldehyde acceptor by hydrogen bonding (c) Proline acts as a Lewis acid through its nitrogen (d) Proline catalysis requires a metal co-catalyst
Answer: (b)
This is the standard picture of the proline-catalysed aldol (and Mannich) reactions: enamine nucleophile, acid-directed electrophile in a chair-like transition state. Iminium catalysis of Diels–Alder reactions is the hallmark of MacMillan imidazolidinones (a). Nitrogen is a Lewis base, not an acid (c). No metal is involved (d).
Practice Q4. In a Suzuki–Miyaura coupling of 4-bromoanisole with phenylboronic acid (Pd(PPh₃)₄, K₂CO₃), the step in which the phenyl group is transferred from boron to palladium is
(a) oxidative addition (b) transmetalation (c) β-hydride elimination (d) reductive elimination
Answer: (b)
Oxidative addition puts the aryl bromide on Pd(0) to give Ar–Pd(II)–Br; base activates the boronic acid (boronate) for transmetalation, which transfers Ph to Pd; reductive elimination releases 4-methoxybiphenyl and regenerates Pd(0). β-Hydride elimination is not part of this cycle (it is in the Heck cycle).
Level 3: Part C Style
Practice Q5. A Ru-catalysed hydrogenation is run with 0.050 mol% catalyst (relative to substrate) and reaches 92% conversion in 4.0 h. In a second experiment, racemic 1-phenylethanol is acetylated with vinyl acetate and CALB; at 45% conversion the acetate has ee 95%.
Which statements are correct?
- The TON of the hydrogenation is 1840 and the average TOF is 460 h⁻¹.
- In the resolution, the remaining alcohol has an ee of about 78%.
- The selectivity factor E of the lipase is about 92.
- Running the resolution to 60% conversion would give the remaining alcohol in higher ee but lower yield.
(a) 1, 2, 3 and 4 (b) 1, 2 and 3 only (c) 1 and 4 only (d) 2 and 3 only
Answer: (a) 1, 2, 3 and 4
- Correct. Catalyst = 0.00050 mol per mol substrate. TON = 0.92/0.00050 = 1840; TOF = 1840/4.0 h = 460 h⁻¹.
- Correct. \( ee_S = c\,ee_P/(1-c) = 0.45 \times 0.95/0.55 = 0.777 \), about 78%.
- Correct. \( E = \ln[1 - 0.45(1.95)]/\ln[1 - 0.45(0.05)] = \ln(0.1225)/\ln(0.9775) = (-2.0996)/(-0.02276) \approx 92 \).
- Correct. Pushing conversion past 50% consumes more of the fast-reacting enantiomer (raising \( ee_S \)) but also some of the slow one, so less alcohol remains. This is the standard trade-off in kinetic resolution.
Practice Q6. Ethyl acetoacetate (CH₃COCH₂CO₂Et) is reduced with fermenting baker’s yeast; the major product has the (S) configuration. The same ketone is reduced separately with NaBH₄ and with L-Selectride.
Which statements are correct?
- The yeast reduction is consistent with hydride delivery to the Re face of the ketone.
- NaBH₄ gives racemic ethyl 3-hydroxybutanoate.
- L-Selectride gives (S)-ethyl 3-hydroxybutanoate in high ee because it is bulky.
- The NAD(P)H consumed in the yeast reduction is regenerated by the cell’s metabolism of sugar.
(a) 1, 2 and 4 only (b) 1 and 2 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 4 only
- Correct. At the carbonyl carbon the priorities are O > CH₂CO₂Et > CH₃. Re-face delivery of H gives the alcohol in which, viewed with H toward the viewer, O → CH₂CO₂Et → CH₃ runs clockwise; with H at the back that sequence is counter-clockwise: (S). This is Prelog’s rule with the larger group of higher priority.
- Correct. Achiral reagent, enantiotopic faces: racemate.
- Wrong. L-Selectride is bulky but achiral; it cannot distinguish enantiotopic faces of an achiral ketone. It gives a racemate.
- Correct. Whole-cell yeast regenerates NAD(P)H by oxidising glucose or sucrose; that is why sugar is added.
Practice Q7. Cyclohex-2-enone is treated with (I) Me₂CuLi in ether, then the resulting enolate is quenched with allyl bromide; (II) MeLi, then H₃O⁺; (III) MeMgBr with 5 mol% CuI; (IV) allyltrimethylsilane with TiCl₄ (Hosomi–Sakurai).
Which statements are correct?
- (I) gives trans-2-allyl-3-methylcyclohexanone as the main diastereomer.
- (II) gives 1-methylcyclohex-2-en-1-ol.
- (III) gives mainly 3-methylcyclohexanone after work-up.
- (IV) gives 3-allylcyclohexanone (conjugate allylation).
(a) 1, 2, 3 and 4 (b) 2 and 3 only (c) 1, 2 and 3 only (d) 2, 3 and 4 only
Answer: (a) 1, 2, 3 and 4
- Correct. Conjugate addition places Me at C3; the enolate is alkylated at C2 from the face opposite the C3 methyl, giving mainly the trans-2,3-disubstituted ketone.
- Correct. MeLi adds 1,2 to give the tertiary allylic alcohol.
- Correct. Catalytic Cu(I) diverts the Grignard reagent to 1,4-addition.
- Correct. With enones and a Lewis acid such as TiCl₄, allylsilanes add in a conjugate (Sakurai) fashion, giving the 3-allyl ketone.
Quick Revision Table
| Family | Must-know reagents and facts |
|---|---|
| Metrics | TON = mol product / mol cat; TOF = TON / time; KR ≤ 50%, DKR → 100% |
| Kinetic resolution | \( c = ee_S/(ee_S+ee_P) \); \( E = \ln[1-c(1+ee_P)]/\ln[1-c(1-ee_P)] \) |
| Organic reagents | DCC/EDC, HOBt/HATU, DEAD/PPh₃, NBS, mCPBA, DMP, DDQ, Burgess, Lawesson’s, TMSCHN₂ |
| Nucleophilic catalysts | DMAP (acylation), DABCO (Baylis–Hillman) |
| Organocatalysts | proline (enamine), MacMillan (iminium), NHC (umpolung: benzoin, Stetter), thioureas, phosphoric acids, cinchona PTC, CBS, Shi |
| Inorganic | NaH (base), LDA (kinetic enolate), CrO₃, KMnO₄, OsO₄, SeO₂, NaIO₄, Lewis acids (TiCl₄, BF₃·OEt₂, Sc(OTf)₃), CeCl₃, SmI₂, TBAF |
| Organometallic ladder | RLi > RMgX > R₂Zn ≈ R₂CuLi > R₃B ≈ R₄Sn ≈ R₄Si (reactivity falls, tolerance rises) |
| 1,2 vs 1,4 | RLi, RMgX: 1,2; R₂CuLi or RMgX/Cu(I): 1,4 |
| Special organometallics | Reformatsky (Zn), Simmons–Smith (Zn–Cu), Tebbe/Petasis (esters → enol ethers), organocerium (enolisable ketones), Sakurai (allylsilane) |
| Pd couplings | Suzuki B, Stille Sn, Negishi Zn, Kumada Mg, Hiyama Si, Sonogashira alkyne/Cu, Heck alkene, Buchwald–Hartwig N; OA → TM → RE |
| Other metals | Grubbs/Schrock metathesis; Rh₂(OAc)₄ carbenoids; CuAAC 1,4-triazole |
| Enzymes | lipases/esterases (KR, desymmetrisation), ADH/KRED (Prelog), P450, BVMO, dioxygenase (cis-diols), transaminase (PLP), aldolases, nitrilases |
| Cofactor recycling | glucose/GDH, formate/FDH, iPrOH |
Key Takeaways
What’s Next
- Chemo-, Regio- and Stereoselective Transformations: how these reagents are chosen to hit one site, one position and one stereoisomer.
- Organometallic Reactions: Substitution to β-Elimination: the elementary steps behind every cross-coupling.
- Enzyme Kinetics, Salt Effects and Catalysis: Michaelis–Menten and catalysis from the physical-chemistry side.
- Organic Transformations and Reagents: Quick Revision.