Reductions: Hydrides, Catalytic Hydrogenation and Dissolving Metals
CSIR NET organic reductions: LiAlH₄, NaBH₄, DIBAL, Luche, boranes, NaBH₃CN; H₂ catalysts, Lindlar; Birch, Wolff–Kishner, Clemmensen, Barton–McCombie, MPV, SmI₂.
- 17 min
On this page · 15 sections
- Prerequisites
- The Hook: One Hydride, Two Products
- Metal Hydride Reagents
- Catalytic Hydrogenation
- Dissolving-Metal Reductions
- Removing Oxygen Completely: C=O → CH₂ and C–OH → C–H
- Other Reductions to Know
- Hydrogen Uptake and Structure
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Functional Group Interconversion: oxidation levels and the acyl ladder; reductions move down that ladder.
- Oxidations: many reductions are the reverse of a reaction there (MPV and Oppenauer, for example).
- Free Radicals: Stability, Chain Reactions and Radical Synthesis: tin hydride chains and dissolving-metal radical anions.
- Organometallic Reactions: oxidative addition of H₂ and migratory insertion behind homogeneous hydrogenation.
The Hook: One Hydride, Two Products
Metal Hydride Reagents
Reactivity matrix
The hydride reagents differ in how electron-rich the hydride is and how strongly the metal coordinates (activates) the carbonyl oxygen. The table reads “reduces under normal conditions” (yes), “slowly or only under forcing conditions” (slow), or “does not reduce” (no).
| Reagent | Aldehyde | Ketone | Acid chloride | Ester / lactone | Carboxylic acid | Amide | Nitrile | Epoxide | Alkyl halide |
|---|---|---|---|---|---|---|---|---|---|
| LiAlH₄ | yes: 1° alcohol | yes: 2° alcohol | yes: 1° alcohol | yes: 1° alcohol (+ R′OH) | yes: 1° alcohol | yes: amine | yes: 1° amine | yes (at less hindered C) | yes |
| NaBH₄ (MeOH/EtOH) | yes | yes | yes | slow | no | no | no | no | slow (1° only) |
| LiBH₄ | yes | yes | yes | yes | no | no | no | yes | — |
| DIBAL-H (−78 °C, 1 equiv) | yes | yes | yes | aldehyde | — | aldehyde (some) | aldehyde after hydrolysis | — | no |
| BH₃·THF | yes | yes | slow | slow | yes: fast (1° alcohol) | yes: amine | yes | — | no |
| NaBH₃CN (pH 6–7) | slow | slow | — | no | no | no | no | no | — |
| NaBH(OAc)₃ | yes (slowly) | very slow | — | no | no | no | no | no | — |
| LiAlH(OtBu)₃ | yes | yes | aldehyde (−78 °C) | slow | no | no | no | — | — |
Points that the table compresses:
- LiAlH₄ delivers up to four hydrides. Esters need two (the aldehyde formed after the first is reduced faster than the ester), acids need three in total including the deprotonation, and amides need two with loss of the oxygen as an aluminate: RCONR′₂ → RCH₂NR′₂.
- NaBH₄ is the chemoselective workhorse: aldehydes and ketones are reduced in the presence of esters, acids, amides, nitriles and nitro groups.
- DIBAL-H is a neutral, Lewis-acidic aluminium hydride. At −78 °C it adds once to an ester; the tetrahedral aluminium acetal is stable cold and collapses to the aldehyde only on work-up. Warm it, or use excess, and the aldehyde is reduced on to the alcohol.
- Borane is electrophilic: it attacks the most electron-rich carbonyl oxygen. That makes it the reagent of choice for reducing a carboxylic acid in the presence of an ester (the opposite of the LiAlH₄/NaBH₄ pattern).
- NaBH₃CN and NaBH(OAc)₃ are attenuated by electron-withdrawing ligands. They reduce iminium ions much faster than ketones, so a ketone, an amine and the reagent can be mixed in one pot (reductive amination). NaBH₃CN can release HCN under strongly acidic conditions, one reason NaBH(OAc)₃ is often preferred.
Modified and selective hydride reductions
| Reagent | Selectivity | Typical use |
|---|---|---|
| Luche (NaBH₄, CeCl₃·7H₂O, MeOH) | 1,2-reduction of enones; also reduces ketones in the presence of aldehydes (aldehydes are tied up as methanol acetals under these conditions) | allylic alcohols from enones |
| L-Selectride, K-Selectride (LiBH(sec-Bu)₃) | bulky: attacks cyclohexanones from the equatorial direction, giving the axial alcohol; also 1,4-reduction of some enones | 4-tert-butylcyclohexanone → cis (axial OH) |
| LiAlH₄, NaBH₄ on cyclohexanones | small: axial attack, giving the equatorial alcohol | 4-tert-butylcyclohexanone → trans (equatorial OH) |
| Red-Al (Na[AlH₂(OCH₂CH₂OMe)₂]) | soluble LiAlH₄ analogue; trans-hydroalumination of propargylic alcohols | (E)-allylic alcohols |
| Super-Hydride (LiEt₃BH) | very nucleophilic; SN2 displacement of halides and sulfonates | deoxygenation via tosylates |
| Zn(BH₄)₂ | chelation-controlled reduction of α- and β-hydroxy/alkoxy ketones | diastereoselectivity via a chelated intermediate (sense depends on substrate) |
| Et₃SiH with TFA or BF₃·OEt₂ | ionic hydrogenation: reduces carbocation-forming substrates (benzylic alcohols, ketals) | deoxygenation of benzylic positions |
| 9-BBN, catecholborane, CBS catalyst | see the stereoselectivity and asymmetric pages |
Catalytic Hydrogenation
Heterogeneous catalysts
H₂ and the substrate adsorb on the metal surface and hydrogen is transferred from the surface to one face of the π-system: syn addition, generally from the less hindered face.
| Catalyst | Reduces | Comment |
|---|---|---|
| Pd/C, H₂ (1 atm) | alkenes, alkynes (to alkane), nitro, azide, imine; hydrogenolysis of benzyl ethers, benzyl esters, Cbz carbamates | standard deprotection of OBn and Cbz |
| PtO₂ (Adams’ catalyst, reduced in situ to Pt) | alkenes, aromatic rings under more forcing conditions, ketones | |
| Raney Ni | alkenes, nitriles, carbonyls; desulfurisation of thioethers and thioacetals | |
| Rh/C, Rh/Al₂O₃, Ru/C | aromatic rings (arene → cyclohexane) | milder than Pt for arenes |
| Lindlar (Pd on CaCO₃, poisoned with Pb(OAc)₂ and quinoline) | alkyne → (Z)-alkene; stops before the alkene is reduced | syn addition |
| Pd on BaSO₄ + quinoline–sulfur (Rosenmund) | acid chloride → aldehyde | poisoned so the aldehyde survives |
| Ni₂B (P-2 nickel) | alkyne → (Z)-alkene | Lindlar alternative |
Relative ease of catalytic hydrogenation, roughly: acid chloride, alkyne, nitro, alkene, aldehyde, ketone, nitrile ≫ arene, ester, amide, acid. Within alkenes, less substituted alkenes are reduced faster (they adsorb more easily): monosubstituted > 1,1-/cis-disubstituted > trans-disubstituted > trisubstituted > tetrasubstituted.
Homogeneous catalysts
| Catalyst | Feature |
|---|---|
| Wilkinson’s catalyst RhCl(PPh₃)₃ | reduces unhindered (mono- and disubstituted) alkenes; leaves C=O, NO₂, CN, esters and trisubstituted alkenes |
| Crabtree’s catalyst [Ir(cod)(PCy₃)(py)]PF₆ | reduces even tetrasubstituted alkenes; directed by a coordinating OH or C=O to deliver H₂ cis to it |
| Ru– and Rh–chiral diphosphine complexes (BINAP, DIPAMP) | enantioselective hydrogenation of functionalised alkenes and ketones (Noyori, Knowles) |
The catalytic cycles (oxidative addition, alkene insertion, reductive elimination) are on the homogeneous catalysis page.
Transfer hydrogenation and diimide
- Transfer hydrogenation: a donor such as isopropanol, formic acid/Et₃N or ammonium formate replaces H₂, with Pd, Ru or Ir catalysts.
- Diimide (HN=NH, generated from KO₂C–N=N–CO₂K + AcOH, or from TsNHNH₂ + heat): delivers H₂ syn to non-polar, symmetrical π-bonds (C=C, C≡C, N=N) through a concerted cyclic transition state; C=O, C≡N and NO₂ are not touched; no hydrogenolysis.
Dissolving-Metal Reductions
Electrons from Li, Na or K in liquid ammonia (deep-blue solvated electrons), with or without an alcohol as proton source, add one at a time to a π* orbital. The sequence is electron, proton, electron, proton.
| Substrate | Conditions | Product | Key point |
|---|---|---|---|
| Internal alkyne | Na or Li, NH₃(l) | (E)-alkene | vinyl radical anion relaxes to the trans geometry before the second electron |
| Arene | Li or Na, NH₃(l), EtOH (Birch) | 1,4-cyclohexadiene (non-conjugated) | kinetic protonation at the centre of the pentadienyl anion |
| Anisole, toluene (EDG) | Birch | 1-substituted cyclohexa-1,4-diene: EDG ends up on a double bond | 1-methoxycyclohexa-1,4-diene; hydrolysis gives cyclohex-2-enone (or the 3-enone first) |
| Benzoic acid (EWG) | Birch | cyclohexa-2,5-diene-1-carboxylic acid: EWG ends up on an sp³ carbon | protonation ipso and para to the EWG |
| α,β-Unsaturated ketone | Li, NH₃ | saturated ketone (via the enolate) | the enolate can be trapped by an alkyl halide (reductive alkylation) |
| Ester | Na, EtOH (Bouveault–Blanc) | primary alcohol | historic alternative to LiAlH₄ |
| Ester (two molecules or a diester) | Na, xylene or toluene, no proton source (acyloin) | α-hydroxy ketone | ketyl coupling; good for medium and large rings |
| Benzyl ether, Ts amide | Na, NH₃ | deprotected alcohol/amine |
Other single-electron reductants
- SmI₂ (Kagan’s reagent): ketyl–olefin couplings, pinacol couplings, removal of α-heteroatoms (α-acetoxy or α-halo ketones → ketones), Barbier-type reactions.
- Zn or Mg (pinacol coupling): two ketyls dimerise to a 1,2-diol. With low-valent titanium (TiCl₃/LiAlH₄, TiCl₄/Zn) the diol is deoxygenated to an alkene (McMurry coupling).
Removing Oxygen Completely: C=O → CH₂ and C–OH → C–H
| Reaction | Conditions | Suitable for | Unsuitable for |
|---|---|---|---|
| Clemmensen | Zn(Hg), conc. HCl, heat | acid-stable aryl alkyl ketones (after Friedel–Crafts acylation) | acid-sensitive groups |
| Wolff–Kishner (Huang Minlon modification) | N₂H₄, KOH, ethylene glycol, about 200 °C | base-stable substrates; via hydrazone and diimide anion, N₂ lost | base-sensitive groups (esters hydrolyse) |
| Thioacetal + Raney Ni (Mozingo) | HS(CH₂)₂SH, BF₃; then Raney Ni | neutral conditions | sulfur poisons other catalysts later |
| Tosylhydrazone + NaBH₃CN (Caglioti-type) | TsNHNH₂, then hydride | mild | |
| Barton–McCombie | alcohol → xanthate or thiocarbonyl imidazolide; Bu₃SnH, AIBN | C–OH → C–H (secondary alcohols best) | |
| Tosylate + LiAlH₄ or LiEt₃BH | SN2 hydride | 1° and unhindered 2° | 3° (elimination) |
| Ionic hydrogenation (Et₃SiH, TFA) | carbocation then hydride | benzylic and tertiary alcohols |
Barton–McCombie mechanism: Bu₃Sn• adds to the thiocarbonyl sulfur; the adduct fragments to give the alkyl radical R• (driven by C=O formation); R• abstracts H from Bu₃SnH, regenerating Bu₃Sn•. It is a radical chain.
Other Reductions to Know
| Reaction | Reagents | Result |
|---|---|---|
| Meerwein–Ponndorf–Verley (MPV) | Al(OiPr)₃, iPrOH | ketone → alcohol via a six-membered hydride-transfer TS; acetone distilled off; chemoselective for C=O over C=C |
| Staudinger | PPh₃, then H₂O | azide → amine (iminophosphorane intermediate) |
| Nitroarene | Fe/HCl, Sn/HCl, SnCl₂, H₂/Pd | aniline |
| Nitroarene | Zn/NH₄Cl | N-arylhydroxylamine |
| Nitroarene | LiAlH₄ | azo compound (not the aniline) |
| Imine/iminium | NaBH₃CN, NaBH(OAc)₃, H₂/Pd | amine |
| Corey–Bakshi–Shibata (CBS) | chiral oxazaborolidine, BH₃ | enantioselective ketone reduction |
| Noyori | Ru–BINAP/diamine, H₂ | enantioselective ketone reduction |
| Deuterium labelling | NaBD₄, LiAlD₄, D₂ | puts D exactly where H would go; used to probe mechanisms |
Hydrogen Uptake and Structure
Catalytic hydrogenation is also an analytical method: the number of moles of H₂ absorbed per mole of compound equals the number of C=C bonds (or twice the number of C≡C) reduced.
$$\text{Degree of unsaturation} = \frac{2C + 2 + N - H - X}{2} = \text{rings} + \pi\text{ bonds}$$So rings = (degree of unsaturation) − (moles of H₂ absorbed per mole), provided every π bond is reduced under the conditions used. At 0 °C and 1 atm, one mole of an ideal gas occupies 22.414 L.
Memory Tricks
Don’t Confuse
| This | Is not this |
|---|---|
| LiAlH₄ on an amide: amine (C=O → CH₂) | DIBAL on an amide (some cases) or Weinreb amide + LiAlH₄: aldehyde |
| LiAlH₄ on a nitrile: RCH₂NH₂ | DIBAL on a nitrile: RCHO after hydrolysis |
| NaBH₄: ketone over ester | BH₃·THF: acid over ester |
| NaBH₄ on an enone: 1,2 + 1,4 mixture | Luche (NaBH₄/CeCl₃): 1,2 only |
| Lindlar or P-2 Ni: (Z)-alkene | Na/NH₃: (E)-alkene |
| Birch on anisole: OMe on C=C | Birch on benzoic acid: COOH on sp³ carbon |
| Clemmensen (acid) | Wolff–Kishner (base) |
| MPV (reduction, iPrOH donor) | Oppenauer (oxidation, acetone acceptor) |
| Wilkinson: least hindered alkene | Crabtree: hindered alkenes, OH-directed |
| Pd/C, H₂: cleaves OBn | Lindlar: does not (and leaves alkenes) |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not taken from any CSIR NET paper. Molar masses: LiAlH₄ 37.95 g mol⁻¹, C₁₀H₁₆ 136.24 g mol⁻¹. Molar volume of an ideal gas at 0 °C, 1 atm: 22.414 L.
Level 1: Foundation
- What does DIBAL-H (1 equiv, −78 °C) give from methyl benzoate after aqueous work-up?
- What is the stereochemistry of the alkene from hex-3-yne with Na in liquid ammonia?
- Which reagent reduces a carboxylic acid selectively in the presence of a methyl ester?
Answers
- Benzaldehyde.
- (E)-hex-3-ene.
- BH₃·THF (or BH₃·SMe₂).
Level 2: Part B Style
Practice Q1. Methyl 4-oxocyclohexane-1-carboxylate is treated with NaBH₄ in methanol at 0 °C. The product is
(a) 4-(hydroxymethyl)cyclohexan-1-one (b) methyl 4-hydroxycyclohexane-1-carboxylate (c) 4-(hydroxymethyl)cyclohexan-1-ol (d) methyl cyclohexanecarboxylate
Answer: (b)
NaBH₄ reduces the ketone and leaves the ester. (a) would need the reverse selectivity; (c) needs LiAlH₄; (d) is a full deoxygenation (Wolff–Kishner type).
Practice Q2. Birch reduction (Li, NH₃(l), tBuOH) of 4-methylanisole gives mainly
(a) 1-methoxy-4-methylcyclohexa-1,4-diene (b) 1-methoxy-4-methylcyclohexa-1,3-diene (c) 3-methoxy-6-methylcyclohexa-1,4-diene with both substituents on sp³ carbons (d) 4-methylcyclohexanone
Answer: (a)
Both OMe and CH₃ are electron donors; donors stay on the double bonds. The two new CH₂ groups (C3 and C6) are para to each other. The product is the non-conjugated diene, not the 1,3-diene (b). (d) would need hydrolysis and further reduction.
Practice Q3. Which reagent combination converts 4-tert-butylcyclohexanone mainly into cis-4-tert-butylcyclohexanol (axial OH)?
(a) NaBH₄, EtOH (b) LiAlH₄, ether (c) L-Selectride, THF, −78 °C (d) H₂, Pd/C
Answer: (c)
The bulky trialkylborohydride attacks from the less hindered equatorial direction, placing the OH axial (cis to the equatorial tert-butyl group in the 1,4-relationship). Small hydrides (a, b) attack axially and give mainly the equatorial (trans) alcohol. (d) does not normally reduce a ketone under mild conditions.
Practice Q4. Which statement about the reduction of hept-2-yn-1-ol is correct?
(a) Lindlar catalyst and H₂ give (E)-hept-2-en-1-ol (b) Red-Al gives (E)-hept-2-en-1-ol (c) H₂ over Pd/C at 1 atm stops at the alkene (d) NaBH₄ gives (Z)-hept-2-en-1-ol
Answer: (b)
Red-Al hydroaluminates propargylic alcohols in a trans fashion (via an alkoxide-directed delivery), giving (E)-allylic alcohols after work-up. Lindlar gives the Z isomer (a is wrong); Pd/C reduces the alkyne to the alkane (c is wrong); NaBH₄ does not reduce isolated alkynes (d is wrong).
Level 3: Part C Style
Practice Q5. A chemist needs to reduce 20.0 mmol of ethyl benzoate to benzyl alcohol with LiAlH₄. In a second experiment, 1.36 g of a hydrocarbon C₁₀H₁₆ absorbs 448 mL of H₂ (measured at 0 °C and 1 atm) over PtO₂.
Which statements are correct?
- The stoichiometric minimum of LiAlH₄ is about 0.38 g.
- Ethanol is also formed in the reduction.
- The hydrocarbon contains two C=C bonds and one ring.
- The hydrocarbon could be limonene.
(a) 1, 2, 3 and 4 (b) 1, 2 and 3 only (c) 3 and 4 only (d) 1 and 3 only
Answer: (a) 1, 2, 3 and 4
- Correct. Each ester needs two hydrides (ester → aldehyde → alcohol), and each LiAlH₄ supplies four. So n(LiAlH₄) = 20.0/2 = 10.0 mmol = 10.0 × 37.95 mg = 0.380 g. In practice an excess is used.
- Correct. The ethoxide leaving group is liberated and protonated on work-up.
- Correct. 1.36 g / 136.24 g mol⁻¹ = 10.0 mmol of hydrocarbon. 0.448 L / 22.414 L mol⁻¹ = 20.0 mmol H₂, i.e. 2 mol H₂ per mole: two C=C bonds. Degree of unsaturation of C₁₀H₁₆ = (22 − 16)/2 = 3, so 3 − 2 = one ring.
- Correct. Limonene (1-methyl-4-(prop-1-en-2-yl)cyclohexene) is a monocyclic C₁₀H₁₆ terpene with two C=C bonds.
Practice Q6. Cyclohex-2-en-1-one is treated in separate experiments with (I) NaBH₄/CeCl₃ in MeOH; (II) Li in NH₃(l), then CH₃I; (III) H₂, Pd/C (1 equiv H₂); (IV) LiAlD₄ in ether, then H₂O.
Which statements are correct?
- (I) gives cyclohex-2-en-1-ol.
- (II) gives 2-methylcyclohexan-1-one.
- (III) gives mainly cyclohexanone.
- (IV) gives cyclohex-2-en-1-ol carrying deuterium on the carbinol carbon (C1) and OH (not OD).
(a) 1, 2, 3 and 4 (b) 1, 2 and 3 only (c) 1 and 4 only (d) 2 and 3 only
Answer: (a) 1, 2, 3 and 4
- Correct. Luche conditions: 1,2-reduction.
- Correct. Dissolving-metal reduction of an enone gives the lithium enolate with the negative charge at C2 (the former α-carbon); alkylation with CH₃I occurs there.
- Correct. Palladium hydrogenates the conjugated C=C faster than the ketone C=O.
- Correct. LiAlH₄ (and LiAlD₄) usually reduces simple cyclic enones mainly 1,2. The deuteride is delivered to the carbonyl carbon; the oxygen is protonated by H₂O on work-up, so the label is C–D, not O–D. (Some 1,4-reduction can occur, but the main product is the allylic alcohol.)
Practice Q7. Compound K, C₉H₁₀O, shows a strong IR band near 1685 cm⁻¹ (conjugated ketone) and gives a positive iodoform test; its ¹H NMR shows a para-disubstituted ring. K is converted into L (C₉H₁₂) by Zn(Hg)/HCl, and into M (C₉H₁₂O) by NaBH₄.
Which statements are correct?
- K is 1-(4-methylphenyl)ethan-1-one (4-methylacetophenone).
- L is 1-ethyl-4-methylbenzene.
- M is formed as a racemate.
- Wolff–Kishner reduction of K would give a different product from L.
(a) 1, 2 and 3 only (b) 1 and 2 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- Correct. Degree of unsaturation 5 (benzene ring + C=O). A conjugated methyl ketone on a para-disubstituted ring with the remaining CH₃: 4-CH₃C₆H₄COCH₃.
- Correct. Clemmensen converts C=O into CH₂: 4-CH₃C₆H₄CH₂CH₃ (C₉H₁₂).
- Correct. NaBH₄ is achiral and the two faces of the ketone are enantiotopic: racemic 1-(4-methylphenyl)ethanol.
- Wrong. Clemmensen and Wolff–Kishner both reduce C=O to CH₂; only the conditions (acid versus base) differ.
Quick Revision Table
| Goal | Reagent |
|---|---|
| Ketone/aldehyde → alcohol, ester untouched | NaBH₄ |
| Ester, acid, amide, nitrile all reduced | LiAlH₄ (amide → amine) |
| Ester or nitrile → aldehyde | DIBAL-H, 1 equiv, −78 °C |
| Acid chloride → aldehyde | LiAlH(OtBu)₃, −78 °C; Rosenmund |
| Acid in presence of ester | BH₃·THF |
| Enone → allylic alcohol | Luche (NaBH₄/CeCl₃) |
| Enone → saturated ketone | Li/NH₃; H₂/Pd; L-Selectride (some) |
| Cyclohexanone → equatorial OH / axial OH | small hydride / L-Selectride |
| Reductive amination | NaBH₃CN (pH 6–7), NaBH(OAc)₃ |
| Alkyne → Z / E alkene | Lindlar or P-2 Ni / Na, NH₃(l) |
| Propargylic alcohol → E-allylic alcohol | Red-Al |
| Least hindered alkene only | Wilkinson’s catalyst; diimide |
| Hindered alkene, OH-directed | Crabtree’s catalyst |
| Arene → 1,4-diene | Birch: EDG on C=C, EWG on sp³ |
| C=O → CH₂ | Clemmensen (acid), Wolff–Kishner (base), thioacetal/Raney Ni (neutral) |
| C–OH → C–H | Barton–McCombie (Bu₃SnH, AIBN); tosylate + LiEt₃BH |
| Ketone → alcohol, C=C untouched | MPV (Al(OiPr)₃, iPrOH) |
| ArNO₂ → ArNH₂ | Fe/HCl, Sn/HCl, SnCl₂, H₂/Pd (not LiAlH₄) |
| Azide → amine | H₂/Pd, LiAlH₄, Staudinger |
| Rings from H₂ uptake | rings = DoU − mol H₂ per mol |
Key Takeaways
What’s Next
- Organic, Inorganic, Organometallic and Enzymatic Reagents: every reductant above sorted by reagent family, plus enzymatic ketone reductions.
- Chemo-, Regio- and Stereoselective Transformations: the selectivity logic behind Luche, L-Selectride and directed hydrogenation.
- Cyclic Systems: Configuration and Conformation: axial versus equatorial attack on cyclohexanones in detail.
- Organic Transformations and Reagents: Quick Revision.