Electron Counting, Metal Carbonyls and Acceptor Ligands
CSIR NET chemistry: 18-electron rule, neutral and ionic counting, carbonyl synthesis and bonding, IR of CO, nitrosyls, phosphines, hydrides and H2 complexes.
- 21 min
On this page · 18 sections
- Prerequisites
- The Hook: A Metal That Turns Into a Gas
- What Counts as Organometallic
- The 18-Electron Rule
- Counting Electrons: Two Methods
- Metal Carbonyls: Synthesis
- Bonding in Metal Carbonyls: The Synergic Model
- Nitrosyl Complexes
- Phosphine Ligands
- Metal Hydrides and Dihydrogen Complexes
- Metal–Metal Bonds and the Isolobal Analogy
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Bonding in Heteronuclear Molecules: the HOMO and LUMO of CO decide how it binds a metal.
- Bonding in Homonuclear Molecules: bond order and why filling an antibonding orbital weakens a bond.
- The HSAB Concept: low-valent metals are soft and prefer soft, polarisable ligands such as CO and phosphines.
- Oxidation states and d-electron counts of the transition metals.
The Hook: A Metal That Turns Into a Gas
What Counts as Organometallic
An organometallic compound contains at least one direct metal–carbon bond. Metal carbonyls (M–CO) are included by convention; metal cyanides and carbonates usually are not. Hydride, phosphine and nitrosyl complexes are discussed alongside because they share the bonding ideas and appear in the same catalytic cycles.
Two terms recur throughout:
- Hapticity (ηⁿ): the number of contiguous ligand atoms bonded to the metal. Ethylene in Zeise’s salt is η²; cyclopentadienyl in ferrocene is η⁵.
- Bridging (μₙ): a ligand bonded to n metal atoms. A μ₂-CO bridges two metals.
The 18-Electron Rule
A transition metal has nine valence orbitals: five (n−1)d, one ns and three np. Filling all nine with bonding or non-bonding electron pairs gives 18 valence electrons, the transition-metal analogue of the octet. Stable, isolable organometallic compounds of the middle transition metals (groups 6–9) with good π-acceptor ligands usually have 18 electrons.
The MO reason
In an octahedral complex ML₆ the six ligand σ orbitals combine with metal s, p and the e_g pair of d orbitals to give six bonding MOs. The t₂g set (d_xy, d_xz, d_yz) has the wrong symmetry for σ bonding and is non-bonding with pure σ-donors. With π-acceptor ligands such as CO, the t₂g set overlaps with empty ligand π* orbitals and becomes bonding. Now there are 6 + 3 = 9 bonding MOs, the e_g* level above them is strongly antibonding, and the gap (Δ_o) is large.
- 18 electrons fill exactly the bonding set: stable.
- More than 18 electrons would enter e_g*: destabilising.
- Fewer than 18 leave a bonding t₂g orbital empty: the complex is reactive, seeking another ligand.
With σ-only ligands (H₂O, NH₃) the t₂g set is non-bonding, Δ_o is small, and anything from 12 to 22 electrons is acceptable. That is why classical Werner complexes ignore the rule, and organometallic complexes of low-valent metals obey it. You can revisit the ligand-field side of this argument in Crystal Field, Ligand Field and MO Theory.
Counting Electrons: Two Methods
Both methods give the same total. Choose one and never mix them within a single count.
Method 1: neutral (covalent) counting
- Start with the metal’s group number (the number of valence electrons of the neutral atom): Ti 4, Cr 6, Mn 7, Fe 8, Co 9, Ni 10.
- Add each ligand’s contribution as a neutral species.
- Subtract the overall positive charge, or add the negative charge.
- Add 1 for each metal–metal bond.
Method 2: ionic counting
- Remove anionic ligands with their electron pairs (H⁻, Cl⁻, CH₃⁻, C₅H₅⁻) to find the metal oxidation state and its dⁿ count.
- Add the electrons donated by each ligand in its closed-shell form.
| Ligand | Neutral method | Ionic method (form) |
|---|---|---|
| CO, PR₃, NH₃, η²-alkene, Fischer carbene, η²-H₂ | 2 | 2 (neutral L) |
| H, Cl, Br, CH₃, Ph, acyl, η¹-allyl, η¹-Cp | 1 | 2 (as anion) |
| η³-allyl | 3 | 4 (C₃H₅⁻) |
| η⁴-butadiene, η⁴-cyclobutadiene | 4 | 4 |
| η⁵-C₅H₅ (Cp) | 5 | 6 (C₅H₅⁻) |
| η⁶-C₆H₆ | 6 | 6 |
| η⁷-C₇H₇ | 7 | 6 (C₇H₇⁺) |
| linear NO | 3 | 2 (NO⁺) |
| bent NO | 1 | 2 (NO⁻) |
| μ₂-CO (bridging) | 1 to each metal (2 shared) | — |
| M–M single bond | 1 to each metal | 1 to each metal |
| alkylidene (Schrock) M=CR₂ | 2 | 4 (CR₂²⁻) |
| alkylidyne M≡CR | 3 | 6 (CR³⁻) |
Counts to know
| Complex | Neutral count | Total | Comment |
|---|---|---|---|
| Ni(CO)₄ | 10 + 8 | 18 | tetrahedral |
| Fe(CO)₅ | 8 + 10 | 18 | trigonal bipyramidal |
| Cr(CO)₆ | 6 + 12 | 18 | octahedral |
| V(CO)₆ | 5 + 12 | 17 | paramagnetic, easily reduced to [V(CO)₆]⁻ (18) |
| Mn₂(CO)₁₀ | 7 + 10 + 1 (Mn–Mn) | 18 per Mn | unbridged, Mn–Mn bond |
| Co₂(CO)₈ (solid) | 9 + 6 + 2 × 1 (μ-CO) + 1 (Co–Co) | 18 per Co | two bridging CO |
| Fe₂(CO)₉ | 8 + 6 + 3 × 1 (μ-CO) + 1 (Fe–Fe) | 18 per Fe | three bridging CO |
| [Co(CO)₄]⁻ | 9 + 8 + 1 | 18 | tetrahedral, Co(−I) |
| HMn(CO)₅ | 7 + 1 + 10 | 18 | Mn(I) |
| CpMn(CO)₃ | 7 + 5 + 6 | 18 | “piano stool” |
| (η⁶-C₆H₆)₂Cr | 6 + 12 | 18 | sandwich |
| RhCl(PPh₃)₃ | 9 + 1 + 6 | 16 | Wilkinson’s catalyst, square planar |
| trans-IrCl(CO)(PPh₃)₂ | 9 + 1 + 2 + 4 | 16 | Vaska’s complex |
| K[PtCl₃(η²-C₂H₄)] | 10 + 3 + 2 + 1 | 16 | Zeise’s salt, Pt(II) d⁸ |
| Cp₂TiCl₂ | 4 + 10 + 2 | 16 | Ti(IV), d⁰ |
| W(CH₃)₆ | 6 + 6 | 12 | W(VI), d⁰; early-metal alkyls are electron-poor |
When the rule fails
- Square-planar d⁸ complexes of Rh(I), Ir(I), Ni(II), Pd(II), Pt(II) are stable at 16 electrons. The ninth orbital (the p_z perpendicular to the plane) is too high in energy to use. This is the 16-electron rule, and these are the complexes that dominate catalysis.
- Early transition metals (groups 3–5) have too few electrons and the ligands are often too bulky to reach 18: Cp₂TiCl₂ (16), [Cp₂ZrMe]⁺ (14), W(CH₃)₆ (12).
- Metallocenes beyond iron exceed 18: Cp₂Co (19), Cp₂Ni (20). The extra electrons sit in weakly antibonding orbitals (see the hydrocarbon-ligand page).
- Odd-electron species such as V(CO)₆ (17) exist when dimerisation is sterically blocked.
Metal Carbonyls: Synthesis
| Route | Example | Comment |
|---|---|---|
| Direct reaction of metal with CO | Ni + 4 CO → Ni(CO)₄ (mild conditions); Fe + 5 CO → Fe(CO)₅ (higher temperature and pressure) | Works for finely divided Ni and Fe |
| Reductive carbonylation of a salt or oxide | CrCl₃ + Al + 6 CO → Cr(CO)₆ + AlCl₃; Re₂O₇ + 17 CO → Re₂(CO)₁₀ + 7 CO₂ | Reducing agent (Al, Na, H₂, or CO itself) plus CO under pressure |
| From a carbonate with H₂ and CO | 2 CoCO₃ + 2 H₂ + 8 CO → Co₂(CO)₈ + 2 CO₂ + 2 H₂O | High pressure |
| Photolysis or thermolysis | 2 Fe(CO)₅ → Fe₂(CO)₉ + CO (light); warming Fe₂(CO)₉ in solution gives Fe₃(CO)₁₂ and Fe(CO)₅ | Loss of CO, then aggregation |
| Reduction to carbonylate anions | Co₂(CO)₈ + 2 Na → 2 Na[Co(CO)₄]; Mn₂(CO)₁₀ + 2 Na → 2 Na[Mn(CO)₅] | Na/Hg or Na in THF; anions are good nucleophiles |
| Substitution | Mo(CO)₆ + 3 MeCN → fac-Mo(CO)₃(MeCN)₃ + 3 CO | Labile nitriles are then replaced by arenes, dienes, phosphines |
Carbonylate anions such as [Mn(CO)₅]⁻ and [CpFe(CO)₂]⁻ are the standard starting points for alkyl and acyl complexes, which you will meet in Alkyls, Carbenes and π-Complexes.
Bonding in Metal Carbonyls: The Synergic Model
CO binds through carbon, not oxygen, because its HOMO, the σ orbital that acts as the carbon lone pair, is concentrated on carbon, and its LUMO, the π* pair, has larger lobes on carbon. The bond has two components:
- σ donation: the carbon-based σ lone pair donates into an empty metal orbital (d_z², s, p).
- π back-donation: a filled metal d orbital (t₂g in an octahedron) donates into the empty CO π* orbital.
graph LR
A["CO sigma HOMO
(C lone pair)"] -- "sigma donation" --> B["empty metal d/s/p"]
C["filled metal d (t2g)"] -- "pi back-donation" --> D["CO pi* LUMO"]
B --> E["M-C bond strengthens"]
D --> F["C-O bond weakens:
longer C-O, lower nu(CO)"]The two parts reinforce each other (synergism): σ donation builds negative charge on the metal, which makes back-donation easier, which in turn draws electron density off the metal so it can accept more σ density.
Consequences of back-donation:
| Observable | Effect |
|---|---|
| M–C bond | shorter and stronger (partial double-bond character, M=C=O resonance form) |
| C–O bond | longer, lower bond order (electrons in π*) |
| ν(CO) | lower than free CO (2143 cm⁻¹) |
| Formal metal oxidation state | low (0, −1, −2) favoured; high-valent carbonyls are rare |
What moves ν(CO)
The more electron density the metal can push into π*, the lower ν(CO). Three controls:
- Charge on the complex. In an isoelectronic series, more negative charge means more back-donation.
| Isoelectronic series (d¹⁰, tetrahedral) | ν(CO) / cm⁻¹ (approx.) |
|---|---|
| Ni(CO)₄ | 2060 |
| [Co(CO)₄]⁻ | 1890 |
| [Fe(CO)₄]²⁻ | 1790 |
| Isoelectronic series (d⁶, octahedral) | ν(CO) / cm⁻¹ (approx.) |
|---|---|
| [Mn(CO)₆]⁺ | 2090 |
| Cr(CO)₆ | 2000 |
| [V(CO)₆]⁻ | 1860 |
Co-ligands. Replacing CO by a poorer π-acceptor (PR₃, amine) leaves more d density for the remaining CO ligands, so their ν(CO) falls. Replacing CO by a better acceptor (PF₃, NO⁺) raises the remaining ν(CO). Approximate π-acceptor order: NO⁺ > CO ≈ PF₃ > PCl₃ > P(OR)₃ > PR₃ > RCN > NH₃ (no π acidity).
Bonding mode. A bridging CO receives back-donation from two or three metals.
| CO mode | Typical ν(CO) range / cm⁻¹ |
|---|---|
| free CO | 2143 |
| terminal M–CO | about 1850–2120 |
| μ₂-CO (bridging two metals) | about 1700–1860 |
| μ₃-CO (capping three metals) | about 1600–1700 |
How many IR bands? Symmetry decides
Only ν(CO) modes that transform like x, y or z are IR active. For the common geometries:
| Complex type | Point group | IR-active ν(CO) bands |
|---|---|---|
| M(CO)₆ | O_h | 1 (T₁u) |
| Ni(CO)₄, M(CO)₄ tetrahedral | T_d | 1 (T₂) |
| Fe(CO)₅ | D₃h | 2 (A₂″ + E′) |
| M(CO)₅L | C₄v | 3 (2A₁ + E) |
| trans-M(CO)₄L₂ | D₄h | 1 (E_u) |
| cis-M(CO)₄L₂ | C₂v | 4 (2A₁ + B₁ + B₂) |
| fac-M(CO)₃L₃ | C₃v | 2 (A₁ + E) |
| mer-M(CO)₃L₃ | C₂v | 3 (2A₁ + B₁) |
This table settles cis/trans and fac/mer questions from a spectrum in seconds. Point groups and character tables are developed in the syllabus unit on symmetry; here you need only the band counts.
Isotope shift
Replacing ¹²CO by ¹³CO increases the reduced mass and lowers ν(CO) by the factor \( \sqrt{\mu_{12}/\mu_{13}} = \sqrt{6.856/7.172} \approx 0.978 \). Free ¹³CO absorbs near 2095 cm⁻¹. Labelled CO is the tool behind the classic CO-insertion experiment on the reactions page.
Nitrosyl Complexes
NO has one more electron than CO (11 valence electrons, one in π*). It binds in two ways:
| Mode | M–N–O angle | Neutral count | Ionic formalism | Typical ν(NO) |
|---|---|---|---|---|
| Linear | about 165–180° | 3 electrons | NO⁺, 2 electrons, isoelectronic with CO | higher, roughly 1650–1900 cm⁻¹ |
| Bent | about 120–140° | 1 electron | NO⁻, 2 electrons, N carries a lone pair | lower, roughly 1525–1700 cm⁻¹ |
Because linear NO gives 3 electrons, replacing one CO and moving one step left in the periodic table keeps the count at 18. This gives the isoelectronic series
$$\text{Ni(CO)}_4,\ \ \text{Co(CO)}_3\text{(NO)},\ \ \text{Fe(CO)}_2\text{(NO)}_2,\ \ \text{Mn(CO)(NO)}_3,\ \ \text{Cr(NO)}_4$$all 18-electron and tetrahedral. Linear-to-bent conversion turns NO from a 3- into a 1-electron donor and opens a coordination site, which is why some nitrosyl complexes undergo associative substitution even though they are formally 18-electron (see the reactions page). The ν(NO) ranges overlap, so IR alone does not always decide the mode; X-ray structures do.
Phosphine Ligands
Tertiary phosphines PR₃ are the main “spectator” ligands of catalysis because their electronic and steric properties can be tuned independently by changing R.
- σ donation from the phosphorus lone pair.
- π acceptance into the P–R σ* orbitals (the older picture used P 3d orbitals; the σ* description is now preferred). Electronegative R (F, OR, Cl) lowers σ* and makes the phosphine a better π-acceptor: PF₃ rivals CO.
Tolman’s two parameters
| Parameter | Definition | What it tells you |
|---|---|---|
| Electronic parameter | ν(CO) of the A₁ band of Ni(CO)₃L | Lower ν(CO) = stronger net donor |
| Cone angle θ | apex angle of a cone, centred on the metal, that just encloses the van der Waals surfaces of the substituents | Larger θ = bulkier ligand |
| Phosphine | Cone angle (approx.) |
|---|---|
| PH₃ | 87° |
| PF₃ | 104° |
| P(OMe)₃ | 107° |
| PMe₃ | 118° |
| PPh₃ | 145° |
| PCy₃ | 170° |
| P(t-Bu)₃ | 182° |
Bulky phosphines favour low coordination numbers and ligand dissociation (Wilkinson’s catalyst loses one PPh₃ to become active), and they speed reductive elimination. Electron-rich phosphines (alkyl rather than aryl) speed oxidative addition. Both effects return in Homogeneous Catalysis.
Metal Hydrides and Dihydrogen Complexes
Hydrides
The M–H ligand counts 1 electron (neutral method) or 2 as H⁻ (ionic method).
Synthesis: protonation of an anion ([Co(CO)₄]⁻ + H⁺ → HCo(CO)₄); oxidative addition of H₂; β-hydride elimination from an alkyl; metathesis with a main-group hydride (NaBH₄, LiAlH₄) on a metal halide.
Characterisation:
- ¹H NMR: hydrides of dⁿ metals (n > 0) resonate far upfield, typically between δ 0 and about −25, a region almost free of other signals. Coupling to ³¹P or ¹⁰³Rh reveals the number and geometry of neighbouring ligands.
- IR: ν(M–H) roughly 1700–2300 cm⁻¹, often weak; M–D shifts it by about \( 1/\sqrt{2} \).
Acid or hydride donor? The “hydride” label is formal. HCo(CO)₄ is a strong acid (it gives H⁺ and [Co(CO)₄]⁻), because the anion is stabilised by the π-acceptor CO ligands. Hydrides with electron-rich donor ligands instead transfer H⁻.
Dihydrogen complexes
In 1984 Kubas reported W(CO)₃(PiPr₃)₂(η²-H₂), the first complex of molecular H₂ bound side-on with the H–H bond intact. The bonding is a σ analogue of the Dewar–Chatt–Duncanson model: σ(H–H) donates to the metal, and the metal back-donates into σ*(H–H). Too much back-donation breaks the H–H bond: the result is a dihydride (oxidative addition).
| Test | η²-H₂ complex | Classical dihydride M(H)₂ |
|---|---|---|
| H–H distance | short, close to H₂ (H₂ itself 74 pm) | long, no H–H bond |
| ¹J(H–D) in the HD isotopomer | large (tens of Hz; free HD about 43 Hz) | very small (a few Hz at most) |
| ¹H T₁ relaxation | short (the two H nuclei are close) | longer |
| Electron count, oxidation state | H₂ is a 2e neutral L; OS unchanged | two 1e X ligands; OS +2 |
Metal–Metal Bonds and the Isolobal Analogy
Mn₂(CO)₁₀ has an unsupported Mn–Mn bond and no bridging CO. Each Mn(CO)₅ unit has 17 electrons; pairing them through the M–M bond gives 18 each, just as two 7-electron CH₃ radicals pair to give ethane. Roald Hoffmann generalised this as the isolobal analogy: two fragments are isolobal if their frontier orbitals have the same number, symmetry, approximate energy and shape, and the same number of electrons in them.
| Organic fragment | Electrons short of octet | Isolobal metal fragment | Electrons short of 18 |
|---|---|---|---|
| CH₃ | 1 | Mn(CO)₅ (d⁷ ML₅) | 1 |
| CH₂ | 2 | Fe(CO)₄ (d⁸ ML₄) | 2 |
| CH | 3 | Co(CO)₃ (d⁹ ML₃) | 3 |
So Mn₂(CO)₁₀ is the analogue of ethane, CH₃Mn(CO)₅ of ethane too, and (CO)₉Co₃(μ₃-CR) of a tetrahedrane in which three CH units have been replaced by Co(CO)₃. The idea is a bridge to cluster electron counting (Wade’s rules), which the syllabus treats in the cages-and-clusters unit.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Neutral method: Cl and H are 1 e⁻, Cp is 5 | Ionic method: Cl⁻ and H⁻ are 2 e⁻, Cp⁻ is 6, metal counted as dⁿ | |
| Terminal CO, 2 e⁻ to one metal | μ₂-CO, 1 e⁻ to each of two metals | |
| Linear NO: 3 e⁻ (NO⁺ formalism) | Bent NO: 1 e⁻ (NO⁻ formalism) | |
| η²-H₂: OS unchanged, large J(HD) | Dihydride: OS +2, tiny J(HD) | |
| Cone angle: steric size | Tolman electronic parameter: donor strength (from ν(CO) of Ni(CO)₃L) | |
| 18-e rule: octahedral/tetrahedral low-valent carbonyls | 16-e rule: square-planar d⁸ (Rh(I), Ir(I), Pd(II), Pt(II)) |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- What is the valence electron count of [CpFe(CO)₂]⁻?
- How many IR-active ν(CO) bands does trans-Mo(CO)₄(PPh₃)₂ show?
- Which binds side-on with its H–H bond intact: the H₂ in W(CO)₃(PiPr₃)₂(H₂) or the two H in cis-IrCl(H)₂(CO)(PPh₃)₂?
Answers
- 18. Neutral: Fe 8 + Cp 5 + 2 CO 4 + 1 (negative charge) = 18.
- One (E_u), because the D₄h trans isomer has a centre of symmetry and only the antisymmetric in-plane stretch is IR active.
- The tungsten complex (Kubas’s η²-H₂ complex). The iridium compound is a dihydride, Ir(III), formed by oxidative addition to Vaska’s complex.
Level 2: Part B Style
Practice Q1. Which complex does not have 18 valence electrons?
(a) Fe(CO)₂(NO)₂ (b) Mn₂(CO)₁₀ (per Mn) (c) V(CO)₆ (d) CpMn(CO)₃
Answer: (c) V(CO)₆
(a) Fe 8 + 2 CO (4) + 2 linear NO (6) = 18. (b) Mn 7 + 5 CO (10) + Mn–Mn (1) = 18. (c) V 5 + 6 CO (12) = 17. (d) Mn 7 + Cp 5 + 3 CO (6) = 18.
Practice Q2. The correct order of ν(CO) is:
(a) [V(CO)₆]⁻ > Cr(CO)₆ > [Mn(CO)₆]⁺ (b) [Mn(CO)₆]⁺ > Cr(CO)₆ > [V(CO)₆]⁻ (c) Cr(CO)₆ > [Mn(CO)₆]⁺ > [V(CO)₆]⁻ (d) all three equal, being isoelectronic
Answer: (b)
All three are d⁶ octahedral. More negative charge means more back-donation into π*, a weaker C–O bond and lower ν(CO): about 2090, 2000 and 1860 cm⁻¹.
Practice Q3. An Fe₂(CO)₉ sample shows a strong IR band near 1830 cm⁻¹ in addition to bands above 2000 cm⁻¹. The 1830 cm⁻¹ band is due to:
(a) a terminal CO on Fe(0) (b) μ₂-bridging CO (c) free CO trapped in the crystal (d) an Fe–Fe stretch
Answer: (b)
Bridging CO ligands receive back-donation from two metals and absorb in roughly the 1700–1860 cm⁻¹ range. Terminal COs are above about 1850, free CO is at 2143, and metal–metal stretches lie far below 400 cm⁻¹.
Practice Q4. Which phosphine has the largest Tolman cone angle?
(a) PMe₃ (b) PPh₃ (c) P(OMe)₃ (d) PCy₃
Answer: (d) PCy₃
Approximate cone angles: P(OMe)₃ 107°, PMe₃ 118°, PPh₃ 145°, PCy₃ 170°. Cyclohexyl groups are bulky near phosphorus; phenyl rings are flat and can turn edge-on.
Level 3: Part C Style
Practice Q5. A d⁶ complex M(CO)₃L₃ (L = a phosphine) shows two strong ν(CO) bands of similar pattern to an A₁ + E pair. Consider:
- The complex is the fac isomer.
- The mer isomer would show three IR-active ν(CO) bands.
- Replacing L by PF₃ would raise the ν(CO) values.
- The complex must be paramagnetic because it has three phosphines.
Which are correct?
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- Correct. fac-M(CO)₃L₃ is C₃v: A₁ + E, two bands.
- Correct. mer is C₂v: 2A₁ + B₁, three bands.
- Correct. PF₃ is a much better π-acceptor than an alkyl or aryl phosphine; it competes with CO for d density, so CO back-donation falls and ν(CO) rises.
- Wrong. A low-spin d⁶ octahedral complex with strong-field ligands has all six electrons paired in t₂g; it is diamagnetic. The number of phosphines has nothing to do with it.
Practice Q6. For a neutral carbonyl, ν(¹²CO) is observed at 2050 cm⁻¹. Assuming the CO oscillator behaves independently, where is ν(¹³CO) expected, and what is the percentage decrease in the C–O force constant relative to free CO (2143 cm⁻¹)?
(a) about 2004 cm⁻¹ and about 8.5% (b) about 2095 cm⁻¹ and about 4.3% (c) about 2004 cm⁻¹ and about 4.3% (d) about 1980 cm⁻¹ and about 8.5%
Answer: (a)
Isotope shift: \( \tilde\nu(^{13}\text{CO}) = 2050 \times \sqrt{\mu_{12}/\mu_{13}} = 2050 \times 0.9777 \approx 2004 \) cm⁻¹ (μ₁₂ = 6.856 u, μ₁₃ = 7.172 u).
Force constant: \( k \propto \tilde\nu^2 \), so \( k/k_{\text{free}} = (2050/2143)^2 = 0.9151 \). The decrease is about 8.5%. Option (c) uses the wavenumber ratio (4.3%) instead of its square, the usual slip.
Practice Q7. A cationic complex [M(H₂)(L)ₙ]⁺ is prepared with HD instead of H₂. The ¹H NMR signal of the H–D ligand is a 1:1:1 triplet with \( ^1J(\text{H–D}) = 32 \) Hz, and the ¹H T₁ of the H₂ isotopomer is very short. Which statements follow?
- The H–D bond is intact; the ligand is η²-HD.
- The metal oxidation state is the same as in the precursor before H₂ binding.
- The ligand counts as two X-type 1-electron ligands in the neutral method.
- Making the metal more electron-rich could convert it into a dihydride.
(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2, 3 and 4 only (d) 1 and 2 only
Answer: (a) 1, 2 and 4 only
- Correct. A J(HD) of tens of Hz (free HD is about 43 Hz) shows a substantial H–D bond; a dihydride would show only a few Hz. The triplet arises from coupling to deuterium (I = 1).
- Correct. η²-H₂ is a neutral 2-electron L ligand; binding it does not oxidise the metal.
- Wrong. That description fits a dihydride. η²-H₂ is one L ligand (2 electrons).
- Correct. Stronger back-donation into σ*(H–H) cleaves the bond: oxidative addition to M(H)₂.
Quick Revision Table
| Idea | Fact |
|---|---|
| 18-e rule basis | 9 valence orbitals; π-acceptors make t₂g bonding |
| 16-e exceptions | square-planar d⁸: RhCl(PPh₃)₃, Vaska’s, Zeise’s salt |
| Neutral method | group no. + ligand e⁻ − charge (+1 per M–M) |
| Ionic method | dⁿ (from OS) + 2 per L, 2 per X⁻, 6 per Cp⁻ |
| Carbonyl formulas | Ni(CO)₄, Fe(CO)₅, Cr(CO)₆; Mn₂(CO)₁₀, Co₂(CO)₈; V(CO)₆ 17 e⁻ |
| Synergic bonding | σ from C lone pair + π back-donation into π* |
| ν(CO) | free 2143; terminal ~1850–2120; μ₂ ~1700–1860; μ₃ ~1600–1700 cm⁻¹ |
| Charge series | [Mn(CO)₆]⁺ > Cr(CO)₆ > [V(CO)₆]⁻; Ni(CO)₄ > [Co(CO)₄]⁻ > [Fe(CO)₄]²⁻ |
| IR bands | O_h 1; T_d 1; D₃h 2; C₄v 3; trans-L₂ 1; cis-L₂ 4; fac 2; mer 3 |
| NO | linear 3 e⁻; bent 1 e⁻ |
| Phosphines | cone angle (PPh₃ 145°, PCy₃ 170°); Tolman ν(CO) of Ni(CO)₃L |
| Hydrides | ¹H δ 0 to about −25; HCo(CO)₄ strong acid |
| η²-H₂ | Kubas 1984; large J(HD), short T₁, OS unchanged |
| Isolobal | CH₃ ↔ Mn(CO)₅; CH₂ ↔ Fe(CO)₄; CH ↔ Co(CO)₃ |
Key Takeaways
What’s Next
- Hydrocarbon Ligands: Alkyls, Carbenes and π-Complexes: how carbon ligands bind and how they are made.
- Organometallic Reactions: what these complexes do.
- Organometallics: Quick Revision.
- Back to the chapter overview.