Step-Growth Polymerisation Kinetics
CSIR NET polymer kinetics: Carothers equation, self- and acid-catalysed polyesterification, stoichiometric imbalance, equilibrium and gel points.
- 19 min
On this page · 16 sections
- Prerequisites
- The Hook: Why 99% Conversion Is Not Good Enough
- Step Growth versus Chain Growth
- The Carothers Equation
- Kinetics of Polyesterification
- Controlling Molar Mass: Stoichiometric Imbalance
- Reversible Polycondensation and Equilibrium
- Ring Formation
- Multifunctional Monomers and Gelation
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Integrated rate laws of second and third order: Rate Laws and Temperature Dependence.
- Equilibrium constants and Le Chatelier’s principle (for reversible polycondensation): Chemical Equilibrium and Le Chatelier’s Principle.
- Number and weight averages, most probable distribution: Molar Mass Averages and Distributions.
The Hook: Why 99% Conversion Is Not Good Enough
Step Growth versus Chain Growth
| Feature | Step growth | Chain growth |
|---|---|---|
| Which species react | any two molecules with complementary groups (monomer, oligomer, polymer) | only monomer adds to a few active centres |
| Monomer consumption | monomer disappears early (only 1% left at \( X_n = 10 \)) | monomer present throughout |
| High polymer appears | only at very high conversion | from the start |
| \( X_n \) with time | rises steadily throughout | high-polymer chains form at once; \( X_n \) of what forms changes little |
| Initiator | none needed (catalyst optional) | required |
| Examples | polyesters, polyamides, polyurethanes, polycarbonates, epoxies | vinyl polymers (radical, ionic, coordination) |
“Condensation” (a small molecule such as water is lost) and “addition” (no by-product) describe the chemistry; “step” and “chain” describe the mechanism. They usually coincide, but polyurethanes form by step growth without losing anything, and ring-opening polymerisation of a lactam can follow a chain-like (for example anionic) mechanism although the product looks like a condensation polymer.
The Carothers Equation
Start with \( N_0 \) monomer molecules carrying equal numbers of A and B groups (A–A + B–B, or A–B). Define the extent of reaction \( p \) as the fraction of A groups (= fraction of B groups) that have reacted. Each reaction joins two molecules into one, so after reaction the number of molecules is \( N = N_0(1 - p) \). The number-average degree of polymerisation, counted in structural units, is
$$\boxed{X_n = \frac{N_0}{N} = \frac{1}{1 - p}}$$| \( p \) | 0.50 | 0.90 | 0.95 | 0.98 | 0.99 | 0.995 | 0.999 |
|---|---|---|---|---|---|---|---|
| \( X_n \) | 2 | 10 | 20 | 50 | 100 | 200 | 1000 |
Useful engineering polyesters and polyamides need \( X_n \) of order 100–200, hence \( p > 0.99 \).
The weight-average degree of polymerisation, from the most probable distribution, is \( X_w = (1 + p)/(1 - p) \), so Đ = 1 + p, approaching 2.
Kinetics of Polyesterification
The equal-reactivity principle
Flory’s simplifying assumption: the reactivity of a functional group is independent of the size of the molecule carrying it. It is justified because reactivity depends on the local environment of the group, which is almost the same after a few units, and because the collision frequency of a group is governed by local segmental motion, not by diffusion of the whole chain. With this principle, a polycondensation is kinetically just a reaction between two kinds of functional groups, and \( [\mathrm{COOH}] \) can be treated like the concentration of a small molecule.
Let \( [\mathrm{M}] = [\mathrm{COOH}] = [\mathrm{OH}] \) (stoichiometric), with \( [\mathrm{M}] = [\mathrm{M}]_0(1 - p) \).
Self-catalysed (no added acid)
The carboxylic acid catalyses its own esterification, so it appears twice in the rate law:
$$-\frac{\mathrm{d}[\mathrm{COOH}]}{\mathrm{d}t} = k[\mathrm{COOH}]^2[\mathrm{OH}] = k[\mathrm{M}]^3$$Third order overall. Integrating:
$$2k[\mathrm{M}]_0^2t = \frac{1}{(1 - p)^2} - 1 \qquad\Longrightarrow\qquad \boxed{X_n^2 = 1 + 2k[\mathrm{M}]_0^2t}$$\( X_n \) grows only as \( t^{1/2} \): self-catalysed polyesterification is slow to reach high polymer.
Externally catalysed (strong acid added)
With a strong acid catalyst at constant concentration, the catalyst term is absorbed into the rate constant, \( k' = k_{\text{cat}}[\mathrm{H^+}] \):
$$-\frac{\mathrm{d}[\mathrm{M}]}{\mathrm{d}t} = k'[\mathrm{M}]^2 \qquad\Longrightarrow\qquad \boxed{X_n = 1 + k'[\mathrm{M}]_0t}$$Second order overall; \( X_n \) is linear in time.
graph TD
A["Polyesterification
-d[M]/dt"] --> B["Self-catalysed
k[M]³ (third order)"]
A --> C["Acid-catalysed
k'[M]² (second order)"]
B --> D["Plot 1/(1-p)² vs t: linear
X_n ∝ t^½ at long times"]
C --> E["Plot 1/(1-p) vs t: linear
X_n ∝ t"]Ratios of times: the quickest Part C check
| Going from \( p = 0.98 \) to \( p = 0.99 \) | Time ratio \( t_{0.99}/t_{0.98} \) |
|---|---|
| Acid-catalysed (\( X_n - 1 \propto t \)) | \( 99/49 = 2.02 \) |
| Self-catalysed (\( X_n^2 - 1 \propto t \)) | \( 9999/2499 = 4.00 \) |
Doubling \( X_n \) at high conversion doubles the time with an added catalyst but quadruples it without one.
What the experiments show
Flory’s polyesterification data (for example diols with adipic acid) gave linear plots of \( 1/(1 - p)^2 \) against \( t \) for the uncatalysed reaction and \( 1/(1 - p) \) against \( t \) for the acid-catalysed one, but only beyond the early stage of the reaction. The early deviations are usually attributed to the large change in the reaction medium as a mixture of small acids and alcohols turns into a polyester, rather than to a failure of equal reactivity; the long linear region at high conversion was the evidence for the principle.
Controlling Molar Mass: Stoichiometric Imbalance
A polymer with reactive end groups keeps reacting when it is melted and processed. Industrially the molar mass is therefore capped by a slight excess of one monomer or by adding a monofunctional reagent.
Let A groups be in deficiency, with stoichiometric ratio \( r = N_A/N_B \le 1 \), and let \( p \) be the extent of reaction of A groups. The initial number of molecules is \( (N_A + N_B)/2 = N_A(1 + 1/r)/2 \); the number of chain ends after reaction is \( N_A(1 - p) + N_B(1 - rp) \), and each molecule has two ends. Dividing:
$$\boxed{X_n = \frac{1 + r}{1 + r - 2rp}}$$Limits:
- \( r = 1 \): the Carothers equation \( 1/(1 - p) \).
- \( p = 1 \) (A completely consumed): \( X_n = (1 + r)/(1 - r) \).
| \( r \) | \( p = 0.99 \) | \( p = 1 \) |
|---|---|---|
| 1.00 | 100 | ∞ |
| 0.99 | 66.8 | 199 |
| 0.98 | 50 | 99 |
| 0.95 | 28.3 | 39 |
At \( p = 1 \) the chains all end in B groups and growth stops; molar mass is now fixed by the recipe, not by how long the reactor runs.
Monofunctional reagent. If \( N_{B'} \) molecules of a monofunctional B reagent are added to equal amounts of A–A and B–B,
$$r = \frac{N_A}{N_B + 2N_{B'}}$$The factor 2 appears because one monofunctional molecule caps a chain end exactly as one excess B–B molecule would cap one end while contributing two B groups.
Getting exact 1:1 stoichiometry is the practical problem. For nylon-6,6 the diamine and diacid are first combined into a 1:1 salt, which can be purified by crystallisation before polymerisation.
Reversible Polycondensation and Equilibrium
Esterification and amidation are reversible:
$$\mathrm{-COOH + HO- \rightleftharpoons -COO- + H_2O}, \qquad K = \frac{[\mathrm{ester}][\mathrm{H_2O}]}{[\mathrm{COOH}][\mathrm{OH}]}$$Closed system (water stays in): starting from \( [\mathrm{M}]_0 \) of each group, at equilibrium \( [\mathrm{ester}] = [\mathrm{H_2O}] = p[\mathrm{M}]_0 \) and \( [\mathrm{COOH}] = [\mathrm{OH}] = (1 - p)[\mathrm{M}]_0 \):
$$K = \frac{p^2}{(1 - p)^2} \qquad\Longrightarrow\qquad \boxed{X_n = \frac{1}{1 - p} = 1 + \sqrt{K}}$$For an esterification with \( K \) of order a few units (say \( K = 4 \)), the closed-system \( X_n \) is only 3. Even \( K = 400 \) gives just 21.
Open system (water removed). If the water concentration is held at \( [\mathrm{H_2O}] \):
$$K = \frac{p[\mathrm{M}]_0[\mathrm{H_2O}]}{(1 - p)^2[\mathrm{M}]_0^2} \qquad\Longrightarrow\qquad X_n = \sqrt{\frac{K[\mathrm{M}]_0}{p[\mathrm{H_2O}]}}$$With \( K = 4 \), \( [\mathrm{M}]_0 = 5 \) mol L⁻¹ and target \( X_n = 100 \) (\( p = 0.99 \)), the water must be held below \( K[\mathrm{M}]_0/(pX_n^2) = 2.0 \times 10^{-3} \) mol L⁻¹. This is why polyesters are finished at high temperature under vacuum. It is Le Chatelier’s principle doing the polymer chemist’s work.
Ring Formation
A chain end can react with the other end of the same molecule. Cyclisation competes with linear growth when the ring formed is strain-free (five- and six-membered rings form easily) and at high dilution, where an end is more likely to meet its own partner than another molecule’s. Step-growth polymerisations are run at high concentration (often in the melt) partly to suppress cyclisation. Monomers that would close a five- or six-membered ring, such as 4-hydroxybutanoic acid, give the lactone rather than polymer.
Multifunctional Monomers and Gelation
If any monomer has functionality \( f > 2 \), chains branch and eventually connect into a single network molecule spanning the sample: the gel point, where viscosity diverges and an insoluble gel appears. Alkyd resins (glycerol + phthalic anhydride), phenol–formaldehyde and epoxy resins are examples.
Carothers’ prediction
Define the average functionality of the mixture
$$f_{\text{avg}} = \frac{\sum_i N_if_i}{\sum_i N_i}$$for stoichiometric mixtures. The number of molecules after reaction is \( N = N_0 - N_0f_{\text{avg}}p/2 \), so
$$X_n = \frac{2}{2 - pf_{\text{avg}}}$$Gelation is identified with \( X_n \to \infty \):
$$\boxed{p_c = \frac{2}{f_{\text{avg}}}}$$For a non-stoichiometric mixture, use twice the number of deficient groups divided by the total number of molecules: \( f_{\text{avg}} = 2N_{\text{deficient groups}}/\sum N_i \). The excess groups cannot react and do not contribute.
Flory–Stockmayer (statistical) prediction
Let \( \alpha \) be the branching coefficient: the probability that a functional group of a branch unit is connected through a chain to another branch unit. A network can form when, on average, one of the \( f - 1 \) remaining branches from each branch unit leads to another branch unit:
$$\boxed{\alpha_c = \frac{1}{f - 1}}$$For A–A + B–B with an A\(_f\) branch unit, where \( r \) is the ratio of A to B groups, \( p \) the extent of reaction of A, and \( \rho \) the fraction of A groups on branch units:
$$\alpha = \frac{rp^2\rho}{1 - rp^2(1 - \rho)}$$When all A groups are on branch units (\( \rho = 1 \)) and \( r = 1 \), \( \alpha = p^2 \), so \( p_c = (f - 1)^{-1/2} \).
| Prediction | Why it errs | Direction |
|---|---|---|
| Carothers | assumes \( X_n \to \infty \) is needed; gel forms when \( X_w \to \infty \), while \( X_n \) is still finite | overestimates \( p_c \) |
| Flory–Stockmayer | ignores intramolecular cyclisation, which wastes bonds | underestimates \( p_c \) |
Experimental gel points generally lie between the two predictions.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Extent of reaction \( p \) (fraction of groups reacted) | Monomer conversion (fraction of monomer molecules used): near 100% already when \( X_n = 10 \) | |
| Structural unit (half of a nylon-6,6 repeat) | Repeat unit | |
| Self-catalysed: third order, \( X_n^2 \) linear in \( t \) | Acid-catalysed: second order, \( X_n \) linear in \( t \) | |
| \( r = N_A/N_B \le 1 \) (A deficient) | \( r > 1 \) (never used; relabel the groups) | |
| Carothers gel point: \( X_n \to \infty \) | Real gel point: \( X_w \to \infty \) | |
| Condensation (by-product lost) | Step growth (mechanism); polyurethanes are step growth without condensation |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- What is \( X_n \) at \( p = 0.995 \) for a stoichiometric linear polycondensation?
- What is the overall order of a self-catalysed polyesterification?
- State the Carothers expression for the gel point.
Answers
- \( X_n = 1/0.005 = 200 \).
- Third order (second in acid, first in alcohol).
- \( p_c = 2/f_{\text{avg}} \).
Level 2: Part B Style
Practice Q1. A diacid and a diol are reacted with stoichiometric ratio \( r = 0.98 \) to \( p = 0.99 \) (of the deficient group). \( X_n \) is:
(a) 33 (b) 50 (c) 99 (d) 100
Answer: (b) 50
\( X_n = (1 + r)/(1 + r - 2rp) = 1.98/(1.98 - 1.9404) = 1.98/0.0396 = 50 \). Option (d) ignores the imbalance; option (c) is the \( p = 1 \) limit.
Practice Q2. In an acid-catalysed polyesterification, \( X_n \) reaches 50 after 2.0 h. Assuming the same kinetics throughout, \( X_n \) after 4.0 h is about:
(a) 70 (b) 99 (c) 100 (d) 200
Answer: (b) 99
\( X_n - 1 = k'[\mathrm{M}]_0t \). At 2 h, \( X_n - 1 = 49 \); at 4 h, \( X_n - 1 = 98 \), so \( X_n = 99 \). Option (a) uses the self-catalysed \( t^{1/2} \) scaling.
Practice Q3. A mixture of 1 mol pentaerythritol (\( f = 4 \)) and 2 mol adipic acid (\( f = 2 \)) is polymerised. The gel points predicted by Carothers and by Flory–Stockmayer are:
(a) 0.75 and 0.577 (b) 0.667 and 0.577 (c) 0.75 and 0.333 (d) 0.80 and 0.707
Answer: (a)
Stoichiometric (4 OH, 4 COOH). \( f_{\text{avg}} = (4 + 4)/3 = 2.667 \); \( p_c = 0.75 \). Statistical: \( \alpha_c = 1/(4 - 1) = 1/3 = p^2 \), \( p_c = 0.577 \). Option (c) reports \( \alpha_c \) instead of \( p_c \).
Practice Q4. An esterification with \( K = 9 \) is run as a closed system to equilibrium from equimolar diacid and diol. The equilibrium \( X_n \) is:
(a) 3 (b) 4 (c) 9 (d) 10
Answer: (b) 4
\( X_n = 1 + \sqrt{K} = 1 + 3 = 4 \) (\( p = 0.75 \)). Open-system operation with water removal is essential.
Level 3: Part C Style
Practice Q5. A self-catalysed polyesterification of equimolar diol and diacid reaches \( p = 0.90 \) in 1.0 h. Consider:
- \( p = 0.95 \) is reached at about 4.0 h.
- The plot of \( 1/(1 - p)^2 \) against \( t \) is linear (beyond the early stage).
- If a strong acid catalyst were added, the plot of \( 1/(1 - p) \) against \( t \) would be linear instead.
- At \( p = 0.95 \) the dispersity, assuming the most probable distribution, is 1.95.
Which are correct?
(a) 1, 2, 3 and 4 (b) 2 and 3 only (c) 1 and 4 only (d) 2, 3 and 4 only
Answer: (a) 1, 2, 3 and 4
- \( X_n^2 - 1 \propto t \): \( 100 - 1 = 99 \) at 1 h; \( 400 - 1 = 399 \) at \( t \), so \( t = 399/99 = 4.03 \) h. Correct.
- The integrated third-order law. Correct.
- Second-order law with \( k' = k_{\text{cat}}[\mathrm{H^+}] \). Correct.
- Đ = 1 + p = 1.95. Correct.
Practice Q6. Nylon-6,6 (repeat unit 226.32 g mol⁻¹) is to be made with \( \overline{M}_n = 20{,}000 \) g mol⁻¹. Which statements are correct?
- The required \( X_n \), counted in structural units, is about 177.
- With exact stoichiometry, the required extent of reaction is about 0.994.
- If instead the reaction is run to completion with a slight excess of diamine, the required \( r \) is about 0.989.
- The required extent of reaction with exact stoichiometry is about 0.989.
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 3 and 4 only
Answer: (a) 1, 2 and 3 only
- \( 20{,}000/113.16 = 176.7 \). Correct.
- \( p = 1 - 1/176.7 = 0.9943 \). Correct.
- \( X_n = (1 + r)/(1 - r) = 176.7 \) gives \( r = (176.7 - 1)/(176.7 + 1) = 0.9888 \). Correct.
- 0.989 comes from counting whole repeat units (\( X = 88.4 \)). Wrong.
Practice Q7. A recipe contains 1.00 mol of a diol, 1.00 mol of a diacid and 0.010 mol of benzoic acid. The polymerisation is taken to complete reaction of the hydroxyl groups. Which statements are correct?
- \( r = 0.990 \).
- \( X_n \approx 200 \).
- Every chain at the end carries at least one carboxylic acid end or a benzoate end.
- Doubling the benzoic acid to 0.020 mol approximately halves \( X_n \).
(a) 1 and 2 only (b) 1, 2, 3 and 4 (c) 3 and 4 only (d) 1, 3 and 4 only
Answer: (b) 1, 2, 3 and 4
- \( r = 2.00/(2.00 + 2 \times 0.010) = 0.990 \). Correct.
- \( r = 2.00/2.02 = 0.9901 \), so \( (1 + r)/(1 - r) = 201 \), i.e. about 200. Correct.
- OH is exhausted, so both chain ends are COOH or benzoate. Correct.
- \( r = 2.00/2.04 = 0.980 \): \( X_n = 1.980/0.0196 = 101 \), about half of 201. Correct.
Quick Revision Table
| Idea | Formula / fact |
|---|---|
| Carothers | \( X_n = 1/(1 - p) \); \( X_w = (1 + p)/(1 - p) \); Đ = 1 + p |
| Self-catalysed | \( -\mathrm{d}[\mathrm{M}]/\mathrm{d}t = k[\mathrm{M}]^3 \); \( X_n^2 = 1 + 2k[\mathrm{M}]_0^2t \) |
| Acid-catalysed | \( -\mathrm{d}[\mathrm{M}]/\mathrm{d}t = k'[\mathrm{M}]^2 \); \( X_n = 1 + k'[\mathrm{M}]_0t \) |
| Time ratio 0.98 → 0.99 | ×2.02 (catalysed); ×4.00 (self-catalysed) |
| Imbalance | \( X_n = (1 + r)/(1 + r - 2rp) \); \( p = 1 \): \( (1 + r)/(1 - r) \) |
| Monofunctional | \( r = N_A/(N_B + 2N_{B'}) \) |
| Equilibrium | closed \( X_n = 1 + \sqrt{K} \); open \( X_n = \sqrt{K[\mathrm{M}]_0/(p[\mathrm{H_2O}])} \) |
| Gel point | Carothers \( p_c = 2/f_{\text{avg}} \); Flory–Stockmayer \( \alpha_c = 1/(f - 1) \) |
| Glycerol + phthalic (2 : 3) | 0.833 (Carothers); 0.707 (statistical) |
| Nylon-6,6 unit | 226.32 repeat = two structural units, 113.16 each |
Key Takeaways
What’s Next
- Chain-Growth Polymerisation Kinetics: radical, ionic and living polymerisation, chain transfer and copolymerisation.
- Molar Mass Averages and Distributions: the most probable distribution in detail.
- Determination of Molar Masses: end-group titration as a check on \( p \).
- Polymer Chemistry: Quick Revision.