Skip to content

Carbanions: Acidity, Enolates, Ylides and Anionic Rearrangements

CSIR NET organic chemistry: carbanion structure, C–H acidity, kinetic vs thermodynamic enolates, ylides, E1cB, Favorskii, Stevens and Wittig rearrangements.

  • 16 min read
  • Updated
On this page · 17 sections
  1. Prerequisites
  2. The Hook: Deuterium Where You Did Not Put It
  3. Structure
  4. Stability and C–H Acidity
  5. Generation
  6. Enolates
  7. Ylides
  8. Elimination Through a Carbanion: E1cB
  9. Carbanion Rearrangements
  10. Evidence That a Carbanion Has Formed
  11. Memory Tricks
  12. Don’t Confuse
  13. Common Mistakes
  14. Practice
  15. Quick Revision Table
  16. Key Takeaways
  17. What’s Next

Prerequisites

The Hook: Deuterium Where You Did Not Put It

Structure

A carbanion has a carbon bearing an unshared electron pair and a negative charge, with eight valence electrons.

TypeGeometryConsequence
Simple alkyl carbanion (CH₃⁻, R₃C⁻)pyramidal, roughly sp³, lone pair in an orbital with s characterinverts rapidly, like an amine; a chiral carbanion usually racemises
Resonance-stabilised (allyl, benzyl, enolate, nitronate)planar, sp², lone pair in a p orbitaldelocalised charge; reacts at more than one site (ambident)
Cyclopropyl carbanionpyramidal, inversion strongly hindered by ring straincan retain configuration
Vinyl carbanionsp², lone pair in an sp² orbitalconfigurationally fairly stable; vinyllithiums keep E/Z geometry at low temperature
Acetylidesp, lone pair in an sp orbitallinear; most stable of the hydrocarbon anions

Real carbanions in solution are usually ion pairs or aggregates with Li⁺, Na⁺, K⁺ or MgX⁺. Organolithiums and Grignard reagents are best regarded as carbanion equivalents with polar C–metal bonds. Solvents and additives that bind the cation (THF, TMEDA, HMPA, crown ethers) make the carbanion more reactive.

Stability and C–H Acidity

Carbanion stability is measured by the pKa of the conjugate acid R–H: the lower the pKa, the more stable the carbanion.

What stabilises a carbanion

FactorEffectExample
s character of the lone-pair orbitalsp > sp² > sp³HC≡CH (pKa about 25) far more acidic than CH₂=CH₂ or CH₃CH₃
Resonance into C=O, C=N, NO₂, CN, SO₂Rcharge moves onto electronegative atomsacetone, nitromethane, malonates
Aromaticity6π anion formedcyclopentadiene (pKa about 16)
Inductive (−I) groupsstabilise the charge through σ bondsCF₃, R₃N⁺
Second-row and heavier heteroatoms (S, P, Si) on the carbanion carbonpolarisability and negative hyperconjugation into σ*(C–S), σ*(C–P), σ*(C–Si)1,3-dithiane anion, phosphorus and sulfur ylides, α-silyl carbanions
Positive neighbourylides (adjacent onium centre)Ph₃P⁺–CH₂⁻, Me₂S⁺–CH₂⁻

What destabilises:

FactorExample
Alkyl groups (electron releasing)CH₃⁻ > RCH₂⁻ > R₂CH⁻ > R₃C⁻ in stability: the opposite of cations
Antiaromaticitycycloheptatrienyl anion (8π)
Lone pairs directly on the carbanion carbon’s neighbour (α-O, α-N)lone-pair repulsion offsets their −I effect

An approximate C–H acidity ladder

Values are rounded and approximate; they differ between aqueous-extrapolated and DMSO scales, so use them only for ordering.

CompoundApprox. pKaCarbanion stabilised by
CH₄, CH₃CH₃about 50nothing
C₆H₆, CH₂=CH₂about 43–44sp²
PhCH₃about 41benzylic resonance
Ph₃CHabout 31–32three rings
HC≡CHabout 25sp
CH₃CO₂Etabout 25ester enolate
CH₃COCH₃about 19–20ketone enolate
Cyclopentadieneabout 16aromatic 6π anion
CH₂(CO₂Et)₂about 13two esters
CH₃NO₂about 10nitronate
CH₃COCH₂COCH₃about 9two ketones

Generation

graph LR
    A["C-H deprotonation
LDA, NaH, BuLi, NaNH2, RO-"] --> C["Carbanion or
carbanion equivalent"] B["Metal-halogen exchange
ArBr + BuLi"] --> C D["Metal insertion
RX + Mg or Li"] --> C E["Conjugate addition
Nu- + enone"] --> C F["Decarboxylation
Cl3C-CO2- loses CO2"] --> C G["Shapiro
tosylhydrazone + 2 BuLi"] --> C
MethodExampleNote
Deprotonationketone + LDA, THF, −78 °Cstrong, hindered, non-nucleophilic base
Metal–halogen exchangeArBr + n-BuLi → ArLi + n-BuBrfast, at low temperature
Direct metallationRBr + Mg → RMgBr; RCl + 2 Li → RLi + LiClGrignard and organolithium reagents
Directed ortho-metallationanisole or an aryl amide + BuLicoordination of Li to the directing group guides deprotonation at the ortho position
Conjugate additionR₂CuLi + enone → enolatethe enolate can be trapped by an electrophile
Decarboxylationtrichloroacetate → CCl₃⁻ + CO₂CCl₃⁻ can lose Cl⁻ to give dichlorocarbene
Shapiro reactionketone tosylhydrazone + 2 RLi → vinyllithium + N₂ + ArSO₂⁻dianion route to a vinyl carbanion

Enolates

Kinetic versus thermodynamic enolates

An unsymmetrical ketone such as 2-methylcyclohexanone can give two enolates.

Kinetic enolateThermodynamic enolate
Which α-H is removedthe less hindered (more accessible, often more numerous) oneeither; equilibration follows
Double bondless substitutedmore substituted
Conditionsstrong, bulky base (LDA), aprotic solvent, low temperature (−78 °C), base in slight excess, short timeweaker base or a slight excess of ketone, protic solvent or higher temperature, longer time
Whyrate of deprotonation decides; no equilibrationstability (more substituted alkene) decides
2-Methylcyclohexanonedeprotonation at C6double bond between C1 and C2 (toward the methyl-bearing carbon)

Equilibration requires a proton source (excess ketone, or protic solvent) that can reprotonate the enolate.

Ambident reactivity: C versus O

An enolate has negative charge on both carbon and oxygen.

Favours C-alkylationFavours O-alkylation
soft electrophiles (CH₃I, allyl and benzyl bromides)hard electrophiles (R₃SiCl, Me₂SO₄, alkyl triflates, acyl chlorides)
tight ion pairs, Li⁺ counterion, less polar solventsfree enolate: K⁺, crown ether, HMPA, DMSO
product C–C bond is thermodynamically favouredcharge-controlled attack at the more electronegative atom

Silyl enol ethers (from O-silylation) are isolable, regiochemically defined enolate equivalents.

Reactions of enolates and other stabilised carbanions

ReactionCarbanion + electrophileProduct
Alkylationenolate + RX (SN2)α-alkyl carbonyl compound
Aldolenolate + aldehyde/ketoneβ-hydroxy carbonyl, then enone by E1cB dehydration
Claisen / Dieckmannester enolate + esterβ-keto ester (driven by deprotonation of the product)
Michaelstabilised carbanion + α,β-unsaturated acceptor1,5-dicarbonyl
Robinson annulationMichael then intramolecular aldolcyclohexenone
Knoevenagelactive methylene + aldehyde, weak amine basealkylidene malonate or similar
Henry (nitroaldol)nitronate + aldehydeβ-nitro alcohol
Darzensα-halo ester enolate + ketoneglycidic ester (epoxide)
Haloformmethyl ketone + X₂/OH⁻carboxylate + CHX₃
Corey–Seebach (umpolung)2-lithio-1,3-dithiane + RX, then hydrolysisketone: the dithiane anion is an acyl anion equivalent

Ylides

An ylide has a carbanion directly bonded to a positively charged heteroatom.

YlideTypical reaction with C=OProduct
Phosphorus ylide Ph₃P⁺–C⁻HRWittig: via oxaphosphetane; driving force is the strong P=O bond of Ph₃P=Oalkene
Dimethylsulfonium methylide, Me₂S⁺–CH₂⁻Corey–Chaykovsky: addition, then intramolecular displacement of Me₂Sepoxide
Dimethylsulfoxonium methylide, Me₂S⁺(O)–CH₂⁻with enones, conjugate (1,4) additioncyclopropyl ketone
Ammonium ylide R₃N⁺–C⁻HRStevens or Sommelet–Hauser rearrangementrearranged amine

Wittig stereochemistry: non-stabilised ylides (R = alkyl) give mainly Z-alkenes under salt-free conditions; stabilised ylides (R = CO₂Et, COR) give mainly E-alkenes. The Horner–Wadsworth–Emmons reaction (phosphonate carbanion) gives mainly E-alkenes and a water-soluble phosphate by-product.

Elimination Through a Carbanion: E1cB

$$\text{H–C}_\beta\text{–C}_\alpha\text{–X} \xrightarrow{\ \text{B}^-\ } {}^{-}\text{C}_\beta\text{–C}_\alpha\text{–X} \longrightarrow \text{C}_\beta{=}\text{C}_\alpha + \text{X}^-$$

The proton is removed first, forming a carbanion (the conjugate base of the substrate), which then expels the leaving group. Conditions that favour E1cB: an acidic β-H (next to C=O, NO₂, SO₂R, CN) and a poor leaving group (OH, OR, OAr).

VariantSlow stepDiagnostic
(E1cB)R, reversibleloss of X⁻ from the carbanionsubstrate exchanges H for D from the solvent faster than it eliminates; no primary KIE on elimination
(E1cB)irrdeprotonationprimary kinetic isotope effect; no exchange
E2 (for comparison)concertedprimary KIE and leaving-group effect together; no exchange

Dehydration of aldol products under base is the commonest E1cB in synthesis.

Carbanion Rearrangements

RearrangementSubstrate + baseKey intermediateProduct
Favorskiiα-haloketone with an α′-H + RO⁻ or OH⁻cyclopropanoneester or acid; cyclic ketones ring-contract (2-chlorocyclohexanone → methyl cyclopentanecarboxylate)
Quasi-Favorskii (semibenzilic)α-haloketone with no α′-Htetrahedral alkoxide; 1,2-shift with loss of X⁻ester or acid
Stevens [1,2]quaternary ammonium (or sulfonium) salt + strong baseylide; radical-pair recombinationtertiary amine with group moved from N to C
Sommelet–Hauser [2,3]benzyltrialkylammonium + NaNH₂ylide; [2,3]-sigmatropic shift into the ringortho-alkylated benzylamine
[1,2]-Wittigether R–O–CH₂R′ + BuLiα-alkoxy carbanion; radical pairalcohol R′CH(R)–OH; migration order follows radical stability (3° > 2° > 1° > Me)
[2,3]-Wittigallyl ether carbanion, low temperatureconcerted [2,3]-sigmatropic shifthomoallylic alcohol
Brookα-silyl alkoxidesilyl moves from C to Osilyl ether and carbanion (driven by the strong Si–O bond)
Benzilic acid1,2-diketone + OH⁻tetrahedral alkoxideα-hydroxy acid (aryl migrates as an anion-driven 1,2-shift)

Evidence That a Carbanion Has Formed

  1. H/D exchange at carbon in a deuterated protic solvent with base.
  2. Racemisation at a stereocentre bearing the acidic H, at a rate comparable with exchange.
  3. Trapping with electrophiles (D₂O, MeI, Me₃SiCl, CO₂).
  4. Kinetics consistent with pre-equilibrium deprotonation (E1cB)R.
  5. Spectroscopy of stabilised anions: NMR of enolates and organolithiums at low temperature; colour of highly conjugated anions (the trityl anion is deep red).

Memory Tricks

Don’t Confuse

ThisvsThat
Kinetic enolate: less substituted, LDA, −78 °CThermodynamic enolate: more substituted, equilibrating conditions
Sulfonium ylide Me₂S⁺CH₂⁻ + enone → epoxide (1,2)Sulfoxonium ylide Me₂S(O)⁺CH₂⁻ + enone → cyclopropane (1,4)
Stevens: [1,2]-shift, ammonium ylideSommelet–Hauser: [2,3]-shift into a benzyl ring, ortho product
[1,2]-Wittig: radical pair[2,3]-Wittig: concerted, allyl ethers
Wittig rearrangement (ether → alcohol)Wittig reaction (ylide + C=O → alkene)
Cyclopentadienide: 6π, aromaticCycloheptatrienide: 8π, antiaromatic
(E1cB)R: exchange faster than elimination(E1cB)irr: deprotonation slow, primary KIE, no exchange

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Which is more stable: the methyl anion or the tert-butyl anion?
  2. Why is cyclopentadiene much more acidic than cyclopentane?
  3. Name the intermediate of the Favorskii rearrangement.
Answers
  1. CH₃⁻: alkyl groups are electron-releasing and destabilise a negative charge.
  2. Its conjugate base, cyclopentadienide, is aromatic (6π, planar, cyclic).
  3. A cyclopropanone.

Level 2: Part B Style

Practice Q1. The correct order of C–H acidity is:

(a) CH₂(COCH₃)₂ > CH₃COCH₃ > HC≡CH > CH₂=CH₂ (b) CH₃COCH₃ > CH₂(COCH₃)₂ > HC≡CH > CH₂=CH₂ (c) HC≡CH > CH₂(COCH₃)₂ > CH₃COCH₃ > CH₂=CH₂ (d) CH₂(COCH₃)₂ > HC≡CH > CH₃COCH₃ > CH₂=CH₂

Answer: (a)

Two carbonyls (pKa about 9) > one carbonyl (about 19–20) > sp C–H (about 25) > sp² C–H (about 44).

Practice Q2. 2-Methylcyclohexanone is treated with LDA in THF at −78 °C, followed by CH₃I. The major product is:

(a) 2,2-dimethylcyclohexanone (b) 2,6-dimethylcyclohexanone (c) 3-methylcyclohexanone (d) 2-methoxy-1-methylcyclohexene

Answer: (b)

LDA at −78 °C forms the kinetic enolate by removing a proton from the less substituted α-carbon, C6. Methylation at C6 gives 2,6-dimethylcyclohexanone. Equilibrating conditions would favour the more substituted enolate and 2,2-dimethylcyclohexanone. CH₃I is a soft electrophile, so C-alkylation dominates over O-alkylation.

Practice Q3. Treatment of 2-chlorocyclohexanone with sodium methoxide in methanol gives mainly:

(a) 2-methoxycyclohexanone (b) cyclohex-2-en-1-one (c) methyl cyclopentanecarboxylate (d) methyl cyclohexanecarboxylate

Answer: (c)

Favorskii rearrangement. Methoxide removes the α′-H, the enolate displaces chloride intramolecularly to form a bicyclic cyclopropanone, methoxide adds to the carbonyl, and the three-membered ring opens to the carbanion, which is protonated. The ring contracts by one carbon.

Practice Q4. Benzyltrimethylammonium iodide is treated with NaNH₂ in liquid ammonia. The major product is:

(a) N,N-dimethylbenzylamine (b) N,N-dimethyl-1-phenylethan-1-amine (c) N,N-dimethyl-2-methylbenzylamine (d) toluene and trimethylamine

Answer: (c)

Sommelet–Hauser rearrangement. Under these conditions the methyl ylide Me₂N⁺(CH₂⁻)CH₂Ph (in equilibrium with the benzylic ylide) undergoes a [2,3]-sigmatropic shift into the ortho position of the ring; rearomatisation by a proton shift gives the ortho-methyl benzylamine, 2-CH₃C₆H₄CH₂NMe₂. Option (b) is the Stevens [1,2] product, which competes under other conditions (for example, at higher temperature).

Level 3: Part C Style

Practice Q5. Acetone (take pKa = 19) is mixed with an equimolar amount of sodium ethoxide in ethanol (take pKa of EtOH = 16). In a separate experiment, acetone is treated with 1.05 equivalents of LDA (take pKa of diisopropylamine = 36). Ignoring activity effects and side reactions, which statements are correct?

  1. With ethoxide, the equilibrium constant for enolate formation is 10⁻³.
  2. With ethoxide, about 3% of the acetone is present as enolate at equilibrium.
  3. With LDA, the equilibrium constant is about 10¹⁷, so enolate formation is essentially complete.
  4. Aldol condensation is impossible with ethoxide because so little enolate is present.

(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  1. Correct. \( K = 10^{16 - 19} = 10^{-3} \).
  2. Correct. Starting from equal amounts, let x be the fraction converted: \( x^2/(1 - x)^2 = 10^{-3} \), so \( x/(1 - x) = 0.0316 \) and \( x = 0.031 \): about 3%.
  3. Correct. \( K = 10^{36 - 19} = 10^{17} \).
  4. Wrong. A small equilibrium concentration of enolate is enough: it reacts with the abundant ketone, and the enolate is replenished. This is exactly how base-catalysed aldol reactions run.

Practice Q6. The compound PhSO₂CH₂CH₂OPh is treated with NaOD in D₂O/dioxane. Recovered starting material, taken after 10% conversion to phenyl vinyl sulfone, contains PhSO₂CD₂CH₂OPh in substantial amount. The elimination rate shows no primary kinetic isotope effect when the CH₂ next to sulfur is deuterated. Which statements are correct?

  1. The mechanism is E1cB with reversible carbanion formation.
  2. Loss of phenoxide from the carbanion is rate-determining.
  3. A concerted E2 mechanism fits the data equally well.
  4. The sulfonyl group makes the β-H acidic and stabilises the carbanion.

(a) 1, 2 and 4 only (b) 1 and 3 only (c) 3 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 4 only

1 and 2. Correct. Deuterium enters the starting material faster than it eliminates, so the α-sulfonyl carbanion forms and is reprotonated many times before phenoxide leaves: (E1cB)R. With deprotonation fast and reversible, the slow step is loss of PhO⁻, so there is no primary KIE. 3. Wrong. In E2 the C–H bond breaks in the rate-determining step (primary KIE expected) and no carbanion lives long enough to exchange with solvent. 4. Correct. The PhSO₂ group stabilises the adjacent negative charge; phenoxide is a poor enough leaving group to let the carbanion form first.

Practice Q7. A Favorskii experiment uses 1-chloro-3-phenylpropan-2-one, PhCH₂COCH₂Cl, with the carbonyl carbon enriched in ¹³C, and sodium methoxide. Which statements are correct?

  1. The cyclopropanone intermediate is 2-phenylcyclopropan-1-one with the label at its carbonyl carbon.
  2. Ring opening occurs mainly to give the benzylic carbanion.
  3. The major product is methyl 3-phenylpropanoate, PhCH₂CH₂CO₂Me, with the label in the ester carbonyl carbon.
  4. The major product is methyl 2-phenylpropanoate.

(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 4 only (d) 3 only

Answer: (a) 1, 2 and 3 only
  1. Correct. Deprotonation at the benzylic CH₂ (more acidic) and intramolecular displacement of Cl⁻ give 2-phenylcyclopropanone; the old carbonyl carbon stays as the carbonyl of the three-membered ring.
  2. Correct. After methoxide adds to the C=O, the ring breaks to give the more stable carbanion: the one on the carbon bearing phenyl (benzylic).
  3. Correct. Cleaving the C(O)–CHPh bond leaves MeO₂C–CH₂–CH⁻Ph, which is protonated to PhCH₂CH₂CO₂Me. The labelled carbon becomes the ester carbonyl.
  4. Wrong. Methyl 2-phenylpropanoate would require cleavage to the primary carbanion, which is less stable.

Quick Revision Table

PointFact
Structuresimple: pyramidal, inverts; delocalised: planar; cyclopropyl and vinyl hold configuration
Stability orderCH₃⁻ > 1° > 2° > 3°; sp > sp² > sp³; resonance, aromaticity, −I, α-S/P/Si stabilise
Acidity ladderalkane ~50 > arene ~43 > toluene ~41 > Ph₃CH ~31 > alkyne ~25 > ketone ~19–20 > Cp-H ~16 > malonate ~13 > MeNO₂ ~10 > acac ~9 (pKa, approximate)
K for deprotonation\( 10^{\text{p}K_a(\text{HB}) - \text{p}K_a(\text{HA})} \)
Kinetic enolateLDA, −78 °C, less substituted
Thermodynamic enolateequilibrating, more substituted
C vs Osoft → C; hard → O
YlidesP: Wittig alkene; S: epoxide; S(O): cyclopropane with enones
E1cBcarbanion first; (E1cB)R shows exchange
RearrangementsFavorskii (cyclopropanone), Stevens [1,2], Sommelet–Hauser [2,3], Wittig [1,2]/[2,3], Brook

Key Takeaways

What’s Next

  • Free Radicals: the one-electron intermediates between carbocations and carbanions.
  • Carbanions that lose a halide become carbenes: see Carbenes for dichlorocarbene from chloroform.
  • Aryl carbanions that lose a halide give Benzynes.
  • Back to the chapter overview.