Carbenes: Singlet and Triplet States, Generation and Reactions
CSIR NET organic chemistry: singlet vs triplet carbenes, Skell rule, diazo and α-elimination routes, cyclopropanation, C–H insertion, Wolff rearrangement, NHCs.
- 14 min
On this page · 12 sections
Prerequisites
- Carbocations and Carbanions: a singlet carbene has both an empty p orbital (cation-like) and a lone pair (anion-like).
- Free Radicals: a triplet carbene behaves as a 1,1-diradical.
- Hydrocarbon Ligands: Alkyls, Carbenes and π-Complexes: Fischer and Schrock metal carbenes, and N-heterocyclic carbenes as ligands.
- Boltzmann Distribution: populations of singlet and triplet states.
The Hook: Two Butenes, Two Answers
Structure and Spin States
A carbene is a neutral species R₂C: with a divalent carbon carrying two non-bonding electrons, six valence electrons in all.
The carbon has two non-bonding orbitals: an in-plane σ orbital (roughly sp², with s character) and a p orbital perpendicular to the R–C–R plane.
| Singlet carbene | Triplet carbene | |
|---|---|---|
| Electron arrangement | both electrons paired in σ; p empty | one electron in σ, one in p, parallel spins |
| Total spin S | 0 | 1 (three microstates) |
| R–C–R angle (CH₂) | narrower (around 100°) | wider (around 135°) |
| Behaves as | electrophile (empty p) and nucleophile (σ lone pair) at the same carbon | 1,1-diradical |
| Cyclopropanation | concerted, stereospecific | stepwise via 1,3-diradical, non-stereospecific |
| Detection | trapping, kinetics | EPR of the triplet (at low temperature, in matrices) |
Methylene, CH₂, has a triplet ground state. The singlet lies only a few tens of kJ mol⁻¹ above it. Pairing two electrons in the σ orbital costs electron repulsion; the singlet gets back only the energy gained by keeping both electrons in the lower σ orbital, which is not enough for CH₂.
Substituents decide the ground state
| Substituent | Effect | Ground state | Examples |
|---|---|---|---|
| π-donors with lone pairs (F, Cl, OR, NR₂) | donate into the empty p orbital, raising p and stabilising the singlet | singlet | :CF₂, :CCl₂, (MeO)₂C:, N-heterocyclic carbenes |
| σ-withdrawing groups | increase s character of σ, lowering it; favour singlet | singlet tendency | halocarbenes (both effects) |
| H, alkyl | small effect | triplet (CH₂); dialkyl carbenes have small gaps | |
| Aryl | conjugation with p stabilises both | triplet for diphenylcarbene | Ph₂C: |
| Wider angle enforced | favours triplet | bulky di-tert-butylcarbene |
Philicity
Singlet carbenes range from electrophilic to nucleophilic, depending on how strongly the substituents fill the p orbital:
| Electrophilic | Ambiphilic | Nucleophilic |
|---|---|---|
| :CCl₂, :CBr₂, :CHCO₂Et (as free carbene), :CH₂ (singlet) | MeO–C–Cl | (MeO)₂C:, NHCs |
| rate of addition rises with alkene electron density (tetramethylethylene fastest) | add preferentially to electron-poor alkenes |
Generation
graph TD
A["Diazo compounds R2C=N2
light, heat or Rh, Cu catalyst"] --> C["Carbene R2C: or
metal carbenoid"]
B["Diazirines
light or heat"] --> C
D["Alpha-elimination
CHCl3 + base gives :CCl2"] --> C
E["Tosylhydrazone salts
Bamford-Stevens"] --> A
F["CH2I2 + Zn(Cu)
Simmons-Smith carbenoid"] --> C
G["Ketene + light
loses CO"] --> C| Route | Example | Comment |
|---|---|---|
| Diazoalkanes, hν or Δ | CH₂N₂ → :CH₂ + N₂ | photolysis gives singlet CH₂ first (spin conservation from singlet diazomethane) |
| Metal-catalysed decomposition of diazo compounds | N₂=CHCO₂Et + Rh₂(OAc)₄ or Cu | metal carbenoids: more selective cyclopropanation and C–H insertion |
| α-Elimination from haloforms | CHCl₃ + KOt-Bu (or 50% NaOH with a phase-transfer catalyst) → CCl₃⁻ → :CCl₂ + Cl⁻ | carbanion loses a halide from the same carbon |
| Other dihalocarbene sources | Cl₃CCO₂Na, heat (−CO₂, −Cl⁻); PhHgCCl₃, heat (Seyferth) | neutral, base-free conditions |
| Bamford–Stevens | R₂C=NNHTs + base, heat → R₂C=N₂ → R₂C: | aprotic solvent: carbene products; protic solvent: diazonium/carbocation products |
| Simmons–Smith | CH₂I₂ + Zn(Cu) → ICH₂ZnI | a carbenoid: transfers CH₂ without forming free :CH₂; Et₂Zn version (Furukawa) |
| Diazirines | three-membered C–N=N ring, hν | photoaffinity labels in chemical biology |
| Ketenes | CH₂=C=O + hν → :CH₂ + CO | historical source of methylene |
Reactions
1. Cyclopropanation and the Skell rule
$$\text{R}_2\text{C:} + \text{C=C} \longrightarrow \text{cyclopropane}$$Skell’s rule: a singlet carbene adds in one concerted step, so the alkene geometry is retained (cis-alkene → cis-cyclopropane). A triplet carbene adds one bond at a time to give a triplet 1,3-diradical; the second bond cannot form until a spin flips, and in that time the diradical rotates about the former C=C bond. The result is a mixture of cis and trans cyclopropanes.
| Observation | Interpretation |
|---|---|
| CH₂N₂ photolysed in neat cis-but-2-ene: cis product only | singlet CH₂ captured before intersystem crossing |
| Same, diluted with inert gas or with photosensitiser (triplet route) | more triplet CH₂: trans isomer appears |
| :CCl₂ from CHCl₃/KOt-Bu + cis-alkene: cis-dichlorocyclopropane only | singlet ground state |
| Simmons–Smith on an allylic alcohol | stereospecific; CH₂ delivered on the face of the OH (zinc coordination) |
Dihalocyclopropanes are useful intermediates: with MeLi or Na they give allenes (Doering–LaFlamme / Skattebøl), via a cyclopropylidene that opens.
2. Insertion into σ bonds
- Singlet CH₂ (from liquid-phase photolysis of diazomethane) inserts into C–H bonds in one step, with retention at carbon and very little selectivity: with pentane, the three isomeric hexanes form in nearly statistical (per-H) proportions. That near-indiscriminate reactivity marks free singlet methylene as one of the most reactive species known.
- Triplet carbenes abstract H to give a radical pair, which then recombines or escapes: loss of stereochemistry, radical by-products.
- Metal carbenoids (Rh₂ carboxylates) insert selectively, especially intramolecularly into C–H bonds that form five-membered rings.
- Insertion into O–H and N–H is fast (carbenes are trapped by alcohols to give ethers).
3. Rearrangements
| Rearrangement | Carbene | Product |
|---|---|---|
| 1,2-H shift | alkyl carbene R–CH₂–C̈–R′ | alkene; very fast, so dialkyl carbenes rarely give intermolecular products |
| Wolff rearrangement | α-keto carbene from an α-diazoketone (hν, Δ or Ag⁺) | ketene by 1,2-shift of the R group to the carbene carbon |
| Arndt–Eistert homologation | RCOCl + CH₂N₂ → RCOCHN₂; Ag₂O or hν with H₂O (or ROH) | RCH₂CO₂H (or ester): one carbon added; migrating group keeps its configuration |
| Fritsch–Buttenberg–Wiechell | vinylidene carbenoid Ar₂C=C(X)Li | diaryl alkyne by 1,2-aryl shift |
| Cyclopropylidene → allene | from gem-dibromocyclopropane + MeLi | allene |
| Ring contraction | Wolff on cyclic α-diazoketones | ring-contracted acid or ester |
The Wolff rearrangement proceeds with retention of configuration at the migrating carbon, which makes Arndt–Eistert homologation of α-amino acids to β-amino acids stereochemically clean.
4. Reactions with aromatic rings
| Reaction | Reagents | Product |
|---|---|---|
| Buchner ring expansion | benzene + N₂CHCO₂Et, hν or Rh catalyst | norcaradiene ⇌ cycloheptatriene ester |
| Reimer–Tiemann | phenol + CHCl₃ + NaOH | mainly ortho-hydroxybenzaldehyde (salicylaldehyde): phenoxide attacks :CCl₂, the CCl₂ group is hydrolysed |
| Ciamician–Dennstedt | pyrrole + :CCl₂ | 3-chloropyridine (ring expansion through a dichlorocyclopropane) |
| Indole + :CCl₂ | 3-chloroquinoline |
5. Reactions with lone pairs: ylides
Carbenes (or carbenoids) and heteroatom lone pairs give ylides: with amines (ammonium ylides), sulfides (sulfonium ylides), carbonyls (carbonyl ylides, which do 1,3-dipolar cycloadditions). Carbylamine (Hofmann isocyanide) test: a primary amine with CHCl₃ and KOH gives a foul-smelling isocyanide RN≡C, through attack of the amine on :CCl₂ and two eliminations of HCl. Secondary and tertiary amines do not give it.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Singlet carbene: paired, bent ~100°, stereospecific | Triplet carbene: unpaired, wider angle, non-stereospecific | |
| Free carbene :CH₂ | Carbenoid ICH₂ZnI or Rh=CHR | |
| Fischer carbene complex: electrophilic carbene carbon | Schrock alkylidene: nucleophilic carbene carbon | |
| Wolff rearrangement: α-diazoketone → ketene | Curtius rearrangement: acyl azide → isocyanate (nitrogen analogue) | |
| Reimer–Tiemann: CHCl₃/NaOH, ortho-CHO | Vilsmeier–Haack: DMF/POCl₃, iminium electrophile | |
| Bamford–Stevens (aprotic): carbene | Shapiro (2 RLi): vinyllithium |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- What is the ground-state multiplicity of :CCl₂?
- Which reagent pair generates the Simmons–Smith carbenoid?
- What is the immediate product of the Wolff rearrangement?
Answers
- Singlet. Chlorine lone pairs donate into the empty p orbital.
- CH₂I₂ and a zinc–copper couple (ICH₂ZnI); or CH₂I₂ with Et₂Zn (Furukawa).
- A ketene.
Level 2: Part B Style
Practice Q1. Phenol is heated with chloroform and aqueous NaOH, and the mixture is acidified. The main organic product is:
(a) 4-hydroxybenzaldehyde (b) 2-hydroxybenzaldehyde (c) phenyl formate (d) 2-hydroxybenzoic acid
Answer: (b)
Reimer–Tiemann. :CCl₂ (from CHCl₃ and OH⁻) is attacked by the phenoxide ring, mainly at the ortho position; the dichloromethyl group is hydrolysed to CHO. Salicylaldehyde is the main product (some para isomer forms).
Practice Q2. trans-But-2-ene reacts with CHBr₃ and KOt-Bu. The product is:
(a) cis-1,1-dibromo-2,3-dimethylcyclopropane (b) trans-1,1-dibromo-2,3-dimethylcyclopropane (c) a 1 : 1 mixture of cis and trans isomers (d) 2,2-dibromobutane
Answer: (b)
:CBr₂ is a singlet and adds in one concerted step; the trans relationship of the methyl groups is retained.
Practice Q3. Benzoic acid is converted to its acid chloride, treated with excess diazomethane, and the product is heated with Ag₂O in water. The final product is:
(a) acetophenone (b) phenylacetic acid (c) methyl benzoate (d) 3-phenylpropanoic acid
Answer: (b)
Arndt–Eistert: PhCOCl → PhCOCHN₂ → (Wolff, −N₂) PhCH=C=O → + H₂O → PhCH₂CO₂H. One carbon is added.
Practice Q4. Which carbene is expected to have a triplet ground state?
(a) :CF₂ (b) (MeO)₂C: (c) Ph₂C: (d) 1,3-dimesitylimidazol-2-ylidene
Answer: (c)
Diphenylcarbene is a ground-state triplet. Difluorocarbene, dimethoxycarbene and NHCs have π-donor substituents that stabilise the singlet.
Level 3: Part C Style
Practice Q5. For a carbene, take the triplet as the ground state and the singlet 37.7 kJ mol⁻¹ (9.0 kcal mol⁻¹) higher. Treat the triplet as three-fold degenerate and the singlet as non-degenerate. Which statements are correct at 298 K?
- The equilibrium ratio of singlet to triplet populations is of the order of 10⁻⁷ to 10⁻⁸.
- Despite this, singlet-derived products can dominate if the singlet reacts much faster than the triplet and the states interconvert rapidly.
- Photolysis of diazomethane in neat liquid cis-but-2-ene giving only cis-1,2-dimethylcyclopropane shows that the singlet is the ground state.
- Adding a large excess of an inert diluent increases the proportion of trans-1,2-dimethylcyclopropane.
(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 4 only
- Correct. \( n_S/n_T = (1/3)\,e^{-\Delta E/RT} \). \( \Delta E/RT = 37\,700/(8.314 \times 298) = 15.2 \); \( e^{-15.2} \approx 2.5 \times 10^{-7} \); divided by 3, about \( 8 \times 10^{-8} \).
- Correct. This is a Curtin–Hammett situation: product ratios depend on the rates of the competing reactions, not only on the populations.
- Wrong. It shows only that the singlet reacted before intersystem crossing to the triplet. Diazomethane photolysis gives singlet CH₂ first, and in neat alkene it is trapped at once.
- Correct. Collisions with the diluent allow relaxation to the triplet before addition; the triplet adds stepwise and scrambles the geometry.
Practice Q6. Compound X (C₄H₈) reacts with CH₂I₂/Zn(Cu) to give Y (C₅H₁₀), which has a ¹H NMR spectrum consistent with a cyclopropane bearing two equivalent methyl groups on adjacent ring carbons. Y is optically inactive and cannot be resolved. Which statements are correct?
- X is cis-but-2-ene.
- Y is cis-1,2-dimethylcyclopropane, a meso compound.
- If X were trans-but-2-ene, Y would be formed as a racemic pair of enantiomers.
- The result requires a triplet carbene.
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
1 and 2. Correct. A cyclopropane with methyls on adjacent carbons comes from a but-2-ene. Unresolvable and inactive: cis-1,2-dimethylcyclopropane has a mirror plane (meso). Simmons–Smith is stereospecific, so X is cis. 3. Correct. trans-1,2-Dimethylcyclopropane is chiral (C₂ axis, no mirror plane); from an achiral reagent it forms as a racemate. 4. Wrong. Stereospecific addition is the singlet or carbenoid behaviour; the zinc carbenoid is not a triplet.
Practice Q7. (S)-2-Phenylpropanoic acid, PhCH(CH₃)CO₂H, is converted to its acid chloride, treated with diazomethane, and the diazoketone is photolysed in methanol. Which statements are correct?
- The product is methyl 3-phenylbutanoate.
- The stereocentre keeps its configuration, because the migrating group moves with retention.
- The carbon of the ester C=O in the product is the carbon that came from diazomethane.
- A ketene is formed and trapped by methanol.
(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 4 only
- Correct. RCOCl → RCOCHN₂ → R–CH=C=O → R–CH₂–CO₂Me with R = PhCH(CH₃)–: methyl 3-phenylbutanoate.
- Correct. In the Wolff rearrangement the migrating carbon keeps its configuration. (The CIP descriptor must be reassigned for the new compound; the spatial arrangement is unchanged.)
- Wrong. The R group migrates from the original carbonyl carbon to the diazomethane carbon. The original carbonyl carbon becomes the ketene C=O and then the ester carbonyl; the diazomethane carbon becomes the new CH₂.
- Correct. Methanol adds to the ketene to give the ester.
Quick Revision Table
| Point | Fact |
|---|---|
| Carbene | neutral R₂C:, 6 valence electrons |
| Singlet | paired σ², empty p; bent ~100°; ambiphilic; stereospecific addition |
| Triplet | σ¹p¹; wider angle; diradical; stepwise, non-stereospecific; EPR-active |
| Ground states | CH₂ triplet; Ph₂C: triplet; CF₂, CCl₂, (MeO)₂C:, NHCs singlet |
| Generation | diazo (hν, Δ, Rh/Cu), diazirines, CHCl₃ + base, Cl₃CCO₂Na, Bamford–Stevens, CH₂I₂/Zn(Cu) |
| Skell rule | singlet: retained geometry; triplet: scrambled |
| Insertion | singlet CH₂ into C–H, nearly statistical; Rh carbenoids selective |
| Wolff / Arndt–Eistert | α-diazoketone → ketene; RCO₂H → RCH₂CO₂H, retention |
| Aromatics | Buchner (cycloheptatriene), Reimer–Tiemann (o-CHO), Ciamician–Dennstedt (3-chloropyridine) |
| Allenes | gem-dihalocyclopropane + MeLi |
| Carbylamine | RNH₂ + CHCl₃ + KOH → RNC (primary amines only) |
Key Takeaways
What’s Next
- Benzynes: another neutral, short-lived intermediate, usually generated by elimination from aryl halides.
- Nitrenes: the nitrogen analogues of carbenes, with the same singlet–triplet logic and the Curtius as the partner of the Wolff.
- Back to the chapter overview.