Skip to content

Bragg's Law and X-ray Diffraction

CSIR NET chemistry: Bragg's law, d-spacing formulas, structure factor and systematic absences, indexing cubic powder patterns, Scherrer size, neutrons.

  • 20 min read
  • Updated
On this page · 16 sections
  1. Prerequisites
  2. The Hook: A Crystal as a Grating
  3. Deriving Bragg’s Law
  4. d-Spacings in Every Crystal System
  5. The Structure Factor and Systematic Absences
  6. Indexing a Cubic Powder Pattern
  7. Applications of X-ray Diffraction
  8. The Laue Condition and the Reciprocal Lattice
  9. Neutron and Electron Diffraction
  10. Memory Tricks
  11. Don’t Confuse
  12. Common Mistakes
  13. Practice
  14. Quick Revision Table
  15. Key Takeaways
  16. What’s Next

Prerequisites

The Hook: A Crystal as a Grating

Deriving Bragg’s Law

Treat a crystal as a stack of parallel planes (hkl) with spacing d. A monochromatic beam of wavelength λ strikes the planes at a glancing angle θ (measured from the plane, not from the normal). Rays reflected from two adjacent planes travel different distances: the lower ray goes an extra \( d\sin\theta \) on the way in and \( d\sin\theta \) on the way out.

Constructive interference needs the path difference to be a whole number of wavelengths:

$$\boxed{n\lambda = 2d\sin\theta}$$
  • The beam is deviated through 2θ, which is why diffractometers record 2θ.
  • Since \( \sin\theta \le 1 \), diffraction is possible only if \( \lambda \le 2d \). The highest order is \( n_{\max} = \lfloor 2d/\lambda \rfloor \).
  • An nth-order reflection from (hkl) is identical to a first-order reflection from (nh nk nl), with \( d_{nh,nk,nl} = d_{hkl}/n \). Crystallographers therefore write Bragg’s law as \( \lambda = 2d_{hkl}\sin\theta \) and fold the order into the indices.

X-ray sources and wavelengths

Laboratory X-rays come from a metal target bombarded by electrons. The sharp characteristic lines (K, L) sit on a continuous background (Bremsstrahlung). For diffraction a single line is selected, usually with a filter or monochromator.

TargetLineWavelength
CuKα (weighted mean of Kα₁ and Kα₂)154.18 pm
CuKα₁154.06 pm
MoKαabout 71.07 pm

A nickel foil removes most of the Cu Kβ line because the Ni absorption edge lies between Cu Kα and Cu Kβ. Shorter wavelengths (Mo) compress the pattern into smaller angles and reach more reflections.

d-Spacings in Every Crystal System

System\( 1/d_{hkl}^2 \)
Cubic\( \dfrac{h^2 + k^2 + l^2}{a^2} \)
Tetragonal\( \dfrac{h^2 + k^2}{a^2} + \dfrac{l^2}{c^2} \)
Orthorhombic\( \dfrac{h^2}{a^2} + \dfrac{k^2}{b^2} + \dfrac{l^2}{c^2} \)
Hexagonal\( \dfrac43\,\dfrac{h^2 + hk + k^2}{a^2} + \dfrac{l^2}{c^2} \)

The monoclinic, triclinic and rhombohedral expressions are longer and are not needed for CSIR NET-style numericals.

Examples. Tetragonal \( a = 400 \), \( c = 600 \) pm: \( d_{101} = (1/400^2 + 1/600^2)^{-1/2} = 333 \) pm. Hexagonal magnesium (\( a = 320.9 \), \( c = 521.0 \) pm): \( d_{100} = \sqrt3a/2 = 278 \) pm, \( d_{002} = c/2 = 261 \) pm, \( d_{101} = 245 \) pm.

The cubic working equation

Combining Bragg’s law with the cubic spacing:

$$\boxed{\sin^2\theta = \frac{\lambda^2}{4a^2}\,(h^2 + k^2 + l^2) = \frac{\lambda^2}{4a^2}\,N}$$

So in a cubic powder pattern the values of \( \sin^2\theta \) are in the ratio of the integers N. Not every integer can be N: 7, 15, 23, 28, 31… cannot be written as a sum of three squares (they have the form \( 4^m(8k + 7) \)). That gap at 7 is the key to telling a primitive from a body-centred lattice.

The Structure Factor and Systematic Absences

The amplitude of a reflection (hkl) is the structure factor, a sum over the atoms j in the unit cell at fractional positions \( (x_j, y_j, z_j) \):

$$\boxed{F_{hkl} = \sum_j f_j \exp\left[2\pi i\,(hx_j + ky_j + lz_j)\right], \qquad I_{hkl} \propto |F_{hkl}|^2}$$

The atomic scattering factor \( f_j \) equals the number of electrons Z at \( \theta = 0 \) and falls off as \( \sin\theta/\lambda \) increases. Heavy atoms dominate X-ray patterns; hydrogen barely shows.

Useful values: \( e^{2\pi i \cdot \text{integer}} = 1 \), \( e^{\pi i n} = (-1)^n \).

Body-centred (atoms at (0,0,0) and \( (\tfrac12,\tfrac12,\tfrac12) \)):

$$F = f\left[1 + e^{\pi i(h + k + l)}\right] = \begin{cases} 2f & h + k + l \text{ even} \\ 0 & h + k + l \text{ odd} \end{cases}$$

Face-centred (atoms at (0,0,0), \( (\tfrac12,\tfrac12,0) \), \( (\tfrac12,0,\tfrac12) \), \( (0,\tfrac12,\tfrac12) \)):

$$F = f\left[1 + e^{\pi i(h + k)} + e^{\pi i(h + l)} + e^{\pi i(k + l)}\right] = \begin{cases} 4f & h, k, l \text{ all even or all odd} \\ 0 & \text{mixed} \end{cases}$$

Reflection conditions by lattice

LatticeReflections presentAllowed N for cubicRatio of \( \sin^2\theta \)
Primitive (P)all1, 2, 3, 4, 5, 6, 8, 9, 10…1 : 2 : 3 : 4 : 5 : 6 : 8 : 9 (no 7)
Body-centred (I)h + k + l even2, 4, 6, 8, 10, 12, 14, 16…1 : 2 : 3 : 4 : 5 : 6 : 7 : 8
Face-centred (F)h, k, l unmixed3, 4, 8, 11, 12, 16, 19, 20…3 : 4 : 8 : 11 : 12 : 16
Diamond (F + extra)unmixed, and if all even then h + k + l = 4n3, 8, 11, 16, 19, 24…3 : 8 : 11 : 16 : 19
Base-centred (C)h + k even(non-cubic systems)—

Screw axes and glide planes add further absences in special classes of reflections (for example, a \( 2_1 \) axis along b removes 0k0 with k odd). These, together with the lattice absences, are how a crystallographer narrows down the space group.

Two-atom structures: why NaCl, KCl and CsCl look different

NaCl. An fcc lattice with Na at (0, 0, 0) and Cl at \( (\tfrac12, 0, 0) \) in the basis:

$$F = \begin{cases} 4(f_{\text{Cl}} + f_{\text{Na}}) & h, k, l \text{ all even} \\ 4(f_{\text{Na}} - f_{\text{Cl}}) & \text{all odd (sign depends on origin; intensity uses the magnitude)} \\ 0 & \text{mixed} \end{cases}$$

The all-odd reflections (111), (311), (331) are weak because the two scattering factors partly cancel.

KCl. K⁺ and Cl⁻ are isoelectronic (18 electrons each), so \( f_{\text{K}^+} \approx f_{\text{Cl}^-} \) and the all-odd reflections nearly vanish. The pattern then looks like a simple cubic lattice with edge \( a/2 \) (about 315 pm for \( a = 629 \) pm): all the ions look alike to X-rays. Early workers had to be careful here; the true cell is fcc.

CsCl. Simple cubic with Cs at (0, 0, 0) and Cl at \( (\tfrac12, \tfrac12, \tfrac12) \):

$$F = \begin{cases} f_{\text{Cs}} + f_{\text{Cl}} & h + k + l \text{ even (strong)} \\ f_{\text{Cs}} - f_{\text{Cl}} & h + k + l \text{ odd (weaker, but present)} \end{cases}$$

Odd reflections are present because Cs⁺ and Cl⁻ scatter differently: CsCl is primitive, not body-centred. In an ordered alloy such as β-brass (CuZn, CsCl type) the odd lines are very weak because Cu and Zn have nearly the same f, and they disappear altogether when the alloy disorders into a bcc solid solution. These “superlattice lines” are a direct measure of order.

What else controls intensity

Besides \( |F|^2 \), the intensity of a powder line contains the multiplicity p (the number of planes in the family that diffract at the same angle: {100} 6, {110} 12, {111} 8 in cubic), a Lorentz–polarisation factor that depends on θ, a temperature (Debye–Waller) factor \( e^{-2B\sin^2\theta/\lambda^2} \) that weakens high-angle lines as atoms vibrate more, and absorption. Questions in CSIR NET normally need only \( |F|^2 \) and occasionally multiplicity.

Indexing a Cubic Powder Pattern

A powder contains crystallites in every orientation, so each set of planes produces a cone of diffracted rays at angle 2θ. A diffractometer records intensity against 2θ.

Recipe for cubic indexing
  1. Convert each 2θ to θ and compute \( \sin^2\theta \).
  2. Divide every value by the first, and look for a ratio pattern. If the ratios are not integers, multiply all of them by 2 or 3 until they are.
  3. Match the integer sequence: 3, 4, 8, 11, 12 → F; 2, 4, 6, 8, 10, 12, 14 → I; 1, 2, 3, 4, 5, 6, 8 → P; 3, 8, 11, 16 → diamond.
  4. Assign hkl from N.
  5. Get a from any line: \( a = \lambda\sqrt N/(2\sin\theta) \). Use the highest-angle line for the best precision.

Worked example: aluminium

With Cu Kα₁ (λ = 154.06 pm), the first four lines are at 2θ = 38.48°, 44.73°, 65.11° and 78.24°.

2θ (°)\( \sin^2\theta \)÷ first× 3Nhkl
38.480.10861.0003.003111
44.730.14481.3334.004200
65.110.28962.6678.008220
78.240.39813.66611.011311

The sequence 3, 4, 8, 11 identifies fcc. From the first line, \( a = 154.06\sqrt3/(2\sqrt{0.1086}) = 404.9 \) pm. With Z = 4 and M = 26.98 g mol⁻¹, \( \rho = 2.70 \) g cm⁻³, the density of aluminium.

The bcc versus simple cubic ambiguity

For bcc, N = 2, 4, 6, 8, 10, 12, 14 give \( \sin^2\theta \) ratios 1 : 2 : 3 : 4 : 5 : 6 : 7. For a primitive cubic lattice with a smaller cell the first six lines give the same 1 : 2 : 3 : 4 : 5 : 6. The two can be told apart only at the seventh line: bcc has a line at ratio 7 (N = 14, the 321 reflection), while simple cubic cannot (N = 7 is impossible) and jumps to 8. If fewer than seven lines are given, the answer needs the density or another piece of information.

Applications of X-ray Diffraction

ApplicationWhat is measuredNotes
Lattice type and cell parametersline positionsindexing; least-squares refinement of a
Phase identificationthe set of d values and relative intensitieseach crystalline phase has a “fingerprint”; compared with reference databases
Polymorphs and phase transitionschanges in pattern with T or Pe.g. ccp versus hcp, rutile versus anatase
Solid solutionsshift of lines with compositionVegard’s law: a varies roughly linearly with composition
Crystallite sizeline widthScherrer equation (below)
Strain and thermal expansionline shifts and broadening
Degree of crystallinitysharp peaks versus a broad amorphous haloused for polymers and drugs
Avogadro constanta and the macroscopic densityX-ray crystal density method
Full structure (single crystal)intensities of thousands of reflectionsbond lengths and angles, absolute configuration from anomalous scattering

Crystallite size: the Scherrer equation

Small crystallites have too few planes for complete destructive interference just off the Bragg angle, so lines broaden:

$$\boxed{\tau = \frac{K\lambda}{\beta\cos\theta}}$$

τ is the mean crystallite dimension, K is a shape factor (about 0.9), β is the line broadening (full width at half maximum, after subtracting instrumental width) in radians, and θ is the Bragg angle (half of 2θ).

Example: β = 0.50° = 0.008727 rad at 2θ = 38.2°, λ = 0.15406 nm:

$$\tau = \frac{0.9 \times 0.15406}{0.008727 \times \cos 19.1^\circ} = 16.8\ \text{nm}$$

The method works for crystallites up to roughly 100–200 nm; larger grains give lines whose width is limited by the instrument.

The Avogadro constant from a crystal

From \( \rho = ZM/N_Aa^3 \):

$$N_A = \frac{ZM}{\rho a^3}$$

For NaCl, Z = 4, M = 58.44 g mol⁻¹, ρ = 2.165 g cm⁻³ and a = 564.0 pm give \( N_A = 4 \times 58.44/[2.165 \times (5.640 \times 10^{-8})^3] = 6.02 \times 10^{23} \) mol⁻¹. Precision measurements of this kind, on nearly perfect silicon crystals, were used to fix \( N_A \) to many significant figures.

Single-crystal methods and the phase problem

MethodRadiationSampleUsed for
Lauewhite (continuous)stationary single crystalsymmetry, orientation of crystals
Rotating crystal / modern single-crystal diffractometermonochromaticsingle crystal rotatedfull structure determination
Powder (Debye–Scherrer, diffractometer)monochromaticfine powderphase identification, cell parameters, size

A detector measures intensities, \( |F|^2 \), but not the phases of F. Recovering the electron density \( \rho(xyz) \) needs those phases: this is the phase problem, solved in practice by direct methods (statistical relations among strong reflections), Patterson methods (heavy-atom positions from \( |F|^2 \) alone) and other techniques.

The Laue Condition and the Reciprocal Lattice

Bragg’s law has an equivalent vector form. Define the reciprocal lattice vectors

$$\mathbf a^* = \frac{\mathbf b \times \mathbf c}{V}, \quad \mathbf b^* = \frac{\mathbf c \times \mathbf a}{V}, \quad \mathbf c^* = \frac{\mathbf a \times \mathbf b}{V}$$

Each reciprocal lattice point \( \mathbf G_{hkl} = h\mathbf a^* + k\mathbf b^* + l\mathbf c^* \) is perpendicular to the planes (hkl) and has length \( 1/d_{hkl} \). Diffraction occurs when the change in the wave vector equals a reciprocal lattice vector:

$$\mathbf k' - \mathbf k = \mathbf G_{hkl} \quad (|\mathbf k| = |\mathbf k'| = 1/\lambda)$$

Taking magnitudes, \( 2(1/\lambda)\sin\theta = 1/d_{hkl} \), which is Bragg’s law. The Ewald sphere (radius \( 1/\lambda \)) shows it geometrically: a reflection occurs whenever a reciprocal lattice point lies on the sphere. Two facts often tested: the reciprocal of an fcc lattice is bcc, and the reciprocal of bcc is fcc. The same reciprocal lattice defines the Brillouin zones on the Band Structure of Solids page.

Neutron and Electron Diffraction

Bragg’s law applies to any wave, including matter waves with \( \lambda = h/p \).

X-raysNeutronsElectrons
Scattered byelectron cloudnuclei (and unpaired electron spins)electrostatic potential (nuclei + electrons)
Dependence on Zf rises smoothly with Zscattering length varies irregularly between elements and isotopesrises with Z
Strength of interactionmoderateweak; needs large samplesvery strong; thin samples, surfaces, gases
Locates Hpoorlywell (especially D)moderately
Special usesroutine structuresH positions, isotopes, magnetic structures, neighbouring elements (e.g. Mn/Fe)surfaces (LEED), thin films (TEM), gas-phase structures

Typical wavelengths:

  • Electrons: \( \lambda = h/\sqrt{2m_eeV} \), about \( 1.226/\sqrt{V} \) nm. At 100 V, 123 pm (comparable to bond lengths, hence low-energy electron diffraction). At 50 kV the non-relativistic value is 5.48 pm; the relativistic correction lowers it to about 5.36 pm.
  • Thermal neutrons: a neutron of kinetic energy 0.025 eV has \( \lambda = h/\sqrt{2m_nE} \approx 181 \) pm, ideal for diffraction from crystals.

Because neutrons carry a magnetic moment, they diffract from ordered electron spins. In an antiferromagnet the magnetic cell is larger than the chemical cell, and extra magnetic reflections appear below the ordering temperature; MnO is the textbook case.

Memory Tricks

Don’t Confuse

ThisvsThat
θ (Bragg, glancing) angle2θ (deviation, what the instrument reports)
nth order from (hkl)first order from (nh nk nl)
Lattice absences (centring)space-group absences (screw axes, glides) in special classes
Intensity \( \propto \vert F\vert ^2 \)amplitude F (its phase is lost)
CsCl: primitive, odd lines presentbcc metal: odd lines absent
KCl: fcc, looks primitive with a/2a true simple cubic crystal
X-rays: scatter from electronsneutrons: from nuclei and spins
Line broadening from size (Scherrer)instrumental broadening (subtract first)

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Write Bragg’s law and say which angle θ is.
  2. Which reflections are present for a body-centred cubic lattice?
  3. Give the ratio of \( \sin^2\theta \) for the first four lines of an fcc metal.
Answers
  1. \( n\lambda = 2d\sin\theta \); θ is the glancing angle between the beam and the planes (half the deviation 2θ).
  2. Those with h + k + l even.
  3. 3 : 4 : 8 : 11 (111, 200, 220, 311).

Level 2: Part B Style

Practice Q1. The (200) planes of NaCl are 282 pm apart. With Cu Kα₁ radiation (154.06 pm), the first-order (200) reflection appears at 2θ equal to:

(a) 15.9° (b) 31.7° (c) 33.1° (d) 63.4°

Answer: (b) 31.7°

\( \sin\theta = 154.06/(2 \times 282) = 0.2732 \), θ = 15.85°, 2θ = 31.7°. Option (a) is θ itself.

Practice Q2. For planes with d = 200 pm and Cu Kα radiation (154 pm), the highest order of Bragg reflection that can be observed is:

(a) 1 (b) 2 (c) 3 (d) 4

Answer: (b) 2

\( n \le 2d/\lambda = 400/154 = 2.6 \), so n = 2. The third order would need \( \sin\theta = 1.16 \).

Practice Q3. Which reflection is absent in the powder pattern of a face-centred cubic metal?

(a) (111) (b) (200) (c) (210) (d) (220)

Answer: (c) (210)

fcc allows only unmixed indices. (210) mixes even and odd, so \( F = 0 \).

Practice Q4. The X-ray powder pattern of KCl (rock-salt structure, \( a = 629 \) pm) can be indexed on a simple cubic cell of edge about 315 pm. The reason is:

(a) KCl has the CsCl structure (b) K⁺ and Cl⁻ have almost equal X-ray scattering factors (c) the (200) reflection is systematically absent in rock salt (d) K⁺ occupies tetrahedral holes

Answer: (b)

The all-odd reflections have \( F = 4(f_{\text{Cl}} - f_{\text{K}}) \approx 0 \) because the ions are isoelectronic. Only all-even reflections remain, which index on a primitive cube of edge a/2. (200) is in fact the strongest line of rock salt, so (c) is false.

Level 3: Part C Style

Practice Q5. A cubic metal gives seven powder lines with Cu Kα₁ (154.06 pm) at \( \sin^2\theta \) = 0.1185, 0.2369, 0.3554, 0.4739, 0.5923, 0.7108 and 0.8293. Which statements are correct?

  1. The lattice is body-centred cubic.
  2. The first line is the (100) reflection.
  3. The cell edge is about 317 pm.
  4. If only the first six lines had been recorded, a simple cubic cell could not have been excluded.

(a) 1 and 3 only (b) 1, 3 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (b) 1, 3 and 4 only

Ratios to the first line: 1 : 2 : 3 : 4 : 5 : 6 : 7. A seventh line at ratio 7 is impossible for a primitive cubic lattice (N = 7 cannot occur), so the sequence must be N = 2, 4, 6, 8, 10, 12, 14: bcc (statement 1 correct).

The first line is therefore (110), not (100). Statement 2 wrong.

\( a = \lambda\sqrt2/(2\sqrt{0.1185}) = 154.06 \times 1.4142/(2 \times 0.3442) = 316.5 \) pm. Statement 3 correct (this is tungsten).

With six lines, N = 1–6 (primitive, smaller cell) fits the same ratios. Statement 4 correct.

Practice Q6. A cubic metal (M = 26.98 g mol⁻¹) gives lines at 2θ = 38.48°, 44.73°, 65.11° and 78.24° with λ = 154.06 pm. Find the lattice type, the cell edge, the density and the metallic radius.

Answer: fcc; a = 405 pm; ρ = 2.70 g cm⁻³; r = 143 pm

\( \sin^2\theta \) = 0.1086, 0.1448, 0.2896, 0.3981. Ratios × 3: 3 : 4 : 8 : 11, so fcc with lines 111, 200, 220, 311.

\( a = 154.06 \times \sqrt{11}/(2\sqrt{0.3981}) = 404.9 \) pm (any line gives the same value).

\( \rho = 4 \times 26.98/[6.022 \times 10^{23} \times (4.049 \times 10^{-8})^3] = 2.70 \) g cm⁻³.

\( r = \sqrt2a/4 = 143.2 \) pm.

Practice Q7. A nanocrystalline powder shows a line at 2θ = 38.2° with a width (FWHM, corrected for instrument) of 0.50°, measured with λ = 0.15406 nm. Take K = 0.9. Which statement is incorrect?

(a) The mean crystallite size is about 17 nm. (b) Doubling the crystallite size would halve the line width. (c) Using β = 0.50 (in degrees) directly would give a size of about 0.29 nm. (d) The same crystallites would give a narrower line at higher 2θ.

Answer: (d) is incorrect

(a) \( \tau = 0.9 \times 0.15406/(0.008727 \times \cos 19.1^\circ) = 16.8 \) nm. Correct.

(b) \( \beta \propto 1/\tau \). Correct.

(c) \( 0.9 \times 0.15406/(0.50 \times 0.945) = 0.29 \) nm, a factor of 57 too small. Correct as a statement about the error.

(d) Incorrect. For fixed τ, \( \beta = K\lambda/(\tau\cos\theta) \); \( \cos\theta \) falls as θ increases, so size broadening increases at higher angles.

Quick Revision Table

IdeaFormula or fact
Bragg’s law\( n\lambda = 2d\sin\theta \); deviation 2θ; needs \( \lambda \le 2d \)
Ordersnth order of (hkl) = first order of (nh nk nl)
Cubic\( \sin^2\theta = (\lambda^2/4a^2)(h^2 + k^2 + l^2) \)
Other systemstetragonal \( (h^2 + k^2)/a^2 + l^2/c^2 \); hexagonal \( \tfrac43(h^2 + hk + k^2)/a^2 + l^2/c^2 \)
Structure factor\( F = \sum f_j e^{2\pi i(hx_j + ky_j + lz_j)} \), \( I \propto \vert F\vert ^2 \)
AbsencesI: h + k + l odd absent; F: mixed absent; C: h + k odd absent
Cubic sequencesP 1,2,3,4,5,6,8; I 2,4,6,…,14; F 3,4,8,11,12; diamond 3,8,11,16
NaClall-even strong \( 4(f_+ + f_-) \), all-odd weak \( 4(f_- - f_+) \)
KCllooks simple cubic, a/2
CsClprimitive; odd lines present
Scherrer\( \tau = K\lambda/\beta\cos\theta \), K ≈ 0.9, β in radians
Avogadro\( N_A = ZM/\rho a^3 \)
Cu Kα / Mo Kα154.18 (Kα₁ 154.06) / about 71.07 pm
Electrons\( \lambda \approx 1.226/\sqrt V \) nm
Thermal neutronsabout 0.025 eV, λ ≈ 180 pm; locate H, magnetic order
Reciprocal lattice\( \vert \mathbf G_{hkl}\vert = 1/d_{hkl} \); fcc ↔ bcc

Key Takeaways

What’s Next

Advertisement
Advertisement