Skip to content

Conformational Isomerism in Acyclic Systems

CSIR NET organic chemistry: Newman projections, torsional and steric strain, butane energetics, gauche effect, allylic strain, atropisomers and Curtin–Hammett.

  • 16 min read
  • Updated
On this page · 16 sections
  1. Prerequisites
  2. The Hook: Why Butane Gives One Set of NMR Signals
  3. Drawing Conformations
  4. Sources of Strain
  5. Ethane and Propane
  6. n-Butane: the Reference Profile
  7. Departures from the Steric Picture
  8. Where Conformation Ends and Configuration Begins
  9. Conformation and Reactivity
  10. Memory Tricks
  11. Don’t Confuse
  12. Common Mistakes
  13. Practice
  14. Quick Revision Table
  15. Key Takeaways
  16. What’s Next

Prerequisites

The Hook: Why Butane Gives One Set of NMR Signals

Drawing Conformations

RepresentationWhat it showsBest for
Wedge-dash3D bonds at a stereocentreassigning R/S
Sawhorsethe C–C bond viewed obliquelyseeing anti and gauche groups in perspective
Newmanview straight down one bond: front carbon as a point, back carbon as a circledihedral angles, eclipsing, anti-periplanar relationships
Zigzagmain chain in the plane, antiperiplanarlong chains, syn/anti relative configuration

The dihedral (torsion) angle θ between two groups on adjacent atoms is the angle between them in the Newman projection.

Klyne–Prelog terms for a torsion angle
Range of θNameCommon name
0° ± 30°syn-periplanar (sp)eclipsed (cis)
30° to 90°syn-clinal (sc)gauche (θ ≈ 60°)
90° to 150°anti-clinal (ac)eclipsed at 120°
150° to 180°anti-periplanar (ap)anti

Sources of Strain

StrainOriginWhere it shows up
Torsional (Pitzer) straineclipsing of bonds on adjacent atomsethane eclipsed form; planar rings
Steric (van der Waals) strainnon-bonded atoms pushed closer than the sum of their van der Waals radiigauche butane; 1,3-diaxial interactions; syn-pentane
Angle (Baeyer) strainbond angles forced away from idealcyclopropane, cyclobutane
Dipolar / electrostaticparallel bond dipoles or lone pairs1,2-dihaloethanes; α-halo ketones
Transannular (Prelog) strainatoms across a medium ring crowded togethercyclooctane to cycloundecane

The total strain of a conformer is treated, to a good first approximation, as a sum of increments: each eclipsing pair and each gauche pair costs a fixed amount.

Ethane and Propane

  • Ethane: the staggered conformation (\( D_{3d} \)) is the minimum, the eclipsed conformation (\( D_{3h} \)) the maximum. The barrier is about 12 kJ mol⁻¹, i.e. about 4 kJ mol⁻¹ per H/H eclipsing pair.
  • The origin of the barrier is still discussed: steric/Pauli repulsion between eclipsed C–H bonds and stabilising \( \sigma_{\text{C–H}} \rightarrow \sigma^*_{\text{C–H}} \) hyperconjugation, which is best when the bonds are anti-periplanar, both favour the staggered form. For the exam, “torsional strain” is the accepted name.
  • From the Eyring equation, a 12 kJ mol⁻¹ barrier gives a rotation rate of roughly \( 5\times10^{10}\ \text{s}^{-1} \) at 298 K.
  • Propane: about 14 kJ mol⁻¹, since one H/H eclipsing pair (4 kJ mol⁻¹) is replaced by an H/CH₃ pair (about 6 kJ mol⁻¹).

n-Butane: the Reference Profile

Rotate about C2–C3, starting from the anti conformer.

Energy increments (kJ mol⁻¹, gas-phase textbook values)
InteractionCost
H/H eclipsed≈ 4.0
H/CH₃ eclipsed≈ 6.0
CH₃/CH₃ eclipsed≈ 11
CH₃/CH₃ gauche≈ 3.8
θ (Me–C2–C3–Me)ConformerInteractionsRelative energy (kJ mol⁻¹)
180°anti (ap)none0
120°eclipsed (ac)2 × H/CH₃ + 1 × H/H≈ 16
60°gauche (sc)1 × Me/Me gauche≈ 3.8
0°fully eclipsed (sp)1 × Me/Me + 2 × H/H≈ 19

The order is anti < gauche < eclipsed (120°) < fully eclipsed (0°).

Populations

Two gauche conformers (θ = +60° and −60°, enantiomeric) and one anti conformer. With \( \Delta G^\circ \approx \Delta E \) and the degeneracy of 2:

$$\frac{N_{\text{gauche}}}{N_{\text{anti}}} = 2\,e^{-\Delta E/RT} = 2\,e^{-3800/(8.314 \times 298)} \approx 0.43$$

So at 298 K butane is about 70% anti and 30% gauche. The factor of 2 is a statistical (entropy) term, \( R\ln 2 \); forgetting it is a standard error.

A useful reference number: a conformer that is \( RT\ln 2 \approx 1.7 \) kJ mol⁻¹ higher than the anti form but doubly degenerate is present in equal total amount.

Branched chains

The same increments handle branched alkanes. For 2-methylbutane, viewed along C2–C3 (C2 carries two CH₃ and an H; C3 carries one CH₃):

  • C3–CH₃ anti to one C2–CH₃: one Me/Me gauche, 3.8 kJ mol⁻¹; there are two such conformers (mirror images).
  • C3–CH₃ anti to C2–H: two Me/Me gauche, 7.6 kJ mol⁻¹; one such conformer.

At 298 K the higher-energy conformer is about 10% of the mixture.

Departures from the Steric Picture

Steric increments predict that bulky or polar groups prefer to be anti. Several important systems do not follow this.

The gauche effect

  • 1,2-Difluoroethane prefers the gauche conformation. The usual explanation is hyperconjugation: in the gauche form each C–F bond is anti-periplanar to a C–H bond, and \( \sigma_{\text{C–H}} \rightarrow \sigma^*_{\text{C–F}} \) donation is better than \( \sigma_{\text{C–F}} \rightarrow \sigma^*_{\text{C–F}} \), which is what the anti form would offer (C–H is the better donor, C–F the better acceptor).
  • The same preference appears in many X–C–C–Y fragments with two electronegative substituents (fluorinated chains, some 1,2-diol and 1,2-amino alcohol derivatives).

Intramolecular hydrogen bonds

  • Ethane-1,2-diol and 2-fluoroethanol favour gauche conformations in the gas phase and in non-polar solvents, where an intramolecular O–H···O or O–H···F interaction is possible only in the gauche geometry.
  • In water or other hydrogen-bonding solvents, intermolecular hydrogen bonds compete, and the preference weakens.

Dipole effects and solvent

  • In 1,2-dichloroethane and 1,2-dibromoethane the anti conformer (zero dipole) dominates in the gas phase. The gauche conformer has a dipole moment and is stabilised by polar solvents, so its population rises with solvent polarity.
  • The measured dipole moment of such a compound is a population-weighted average; it increases with temperature as the gauche population grows.

Carbonyl and alkene systems

  • In acetaldehyde, a methyl C–H eclipses the C=O bond in the preferred conformation; in propanal the preferred conformer has the methyl group eclipsing C=O. Eclipsing a double bond is not penalised like eclipsing a single bond.
  • In propene, a C–H of the methyl group eclipses the C=C bond in the preferred conformation.
  • Allylic 1,3-strain (A(1,3) strain). In an alkene with a substituent cis to an allylic CH(R)R′ group, the allylic substituents avoid that cis group, so the allylic C–H is forced to eclipse the C=C, roughly in the plane of the alkene. This locks the conformation of the allylic stereocentre, and is the basis of much acyclic stereocontrol (see Asymmetric Induction).
  • 1,3-Butadiene prefers the planar s-trans conformation; the s-cis conformer, required for the Diels–Alder reaction, is less stable and less populated. Substituents that crowd the s-trans form (a 2-substituent) or the s-cis form (a (Z)-1-substituent) change the Diels–Alder rate accordingly.

Partial double bonds

  • In amides, delocalisation of the nitrogen lone pair into C=O gives the C–N bond partial double-bond character. Rotation is slow on the NMR time scale at room temperature, so the two N-methyl groups of DMF give separate signals; they coalesce on heating.
  • The same effect makes E/Z isomers of amides, esters and enamines distinct conformational families.

Where Conformation Ends and Configuration Begins

Barrier, rate and half-life (Eyring)
$$k = \frac{k_BT}{h}\,e^{-\Delta G^\ddagger/RT}, \qquad t_{1/2} = \frac{\ln 2}{k}$$

At 298 K, \( k_BT/h \approx 6.2 \times 10^{12}\ \text{s}^{-1} \), \( RT \approx 2.48 \) kJ mol⁻¹, and every 5.7 kJ mol⁻¹ of barrier slows the rate tenfold.

Barrier (kJ mol⁻¹)Approximate rate at 298 KBehaviour
≈ 12 (ethane)\( \sim 10^{10}\ \text{s}^{-1} \)free rotation
≈ 45 (cyclohexane ring flip)\( \sim 10^{5}\ \text{s}^{-1} \)averaged NMR at room temperature, frozen out at low temperature
≈ 92half-life ≈ 1000 sseparable at room temperature
> 100hours to yearsconfigurationally stable for practical purposes

Atropisomers. Ōki proposed that conformers be called atropisomers when they interconvert with a half-life of at least 1000 s at the temperature of interest. By the Eyring equation this corresponds to a barrier of about 92 kJ mol⁻¹ at 300 K. The definition is temperature-dependent: a pair that is separable at 0 °C may racemise at 80 °C.

Biphenyl itself is twisted in the gas phase (planarity is opposed by ortho H/H contacts) but rotates freely. Two or more large ortho substituents (NO₂, COOH, Br, I, or a fused ring as in BINOL) raise the barrier into the atropisomeric range. The rules for naming the resulting axis are on Stereogenicity and Chirality.

Conformation and Reactivity

Anti-periplanar requirements

  • E2 elimination proceeds best from the conformer in which H and the leaving group are anti-periplanar. The stereochemistry of the alkene is therefore set by which conformer can react.
  • Debromination by iodide is also an anti elimination: meso-1,2-dibromo-1,2-diphenylethane gives (E)-stilbene, and the racemic (dl) dibromide gives (Z)-stilbene. Since Br₂ adds anti, the sequence (E)-stilbene → meso dibromide → (E)-stilbene is self-consistent.
  • In 2-bromobutane, both anti-periplanar conformers leading to 2-butene are available, but the one leading to (E)-2-butene has the two methyl groups anti and is lower in energy; its transition state is lower too, and (E)-2-butene is the major isomer.
  • Neighbouring-group participation, pinacol and Wagner–Meerwein shifts, and Grob fragmentation generally proceed best when the migrating, participating or fragmenting bond is anti-periplanar to the leaving group.

The Curtin–Hammett principle

Suppose conformers A and B interconvert rapidly (barrier much lower than the barriers to reaction) and each gives its own product.

Curtin–Hammett principle
$$\frac{[P_B]}{[P_A]} = K\,\frac{k_B}{k_A} = e^{-(G^\ddagger_B - G^\ddagger_A)/RT}$$

where \( K = [B]/[A] \) and \( G^\ddagger_A \), \( G^\ddagger_B \) are the free energies of the two transition states on a common scale. The product ratio depends only on the difference in transition-state energies, not on the populations of the conformers.

graph LR
    A["Conformer A
(major)"] <-->|"fast"| B["Conformer B
(minor)"] A -->|"k_A, via TS_A"| PA["Product P_A"] B -->|"k_B, via TS_B"| PB["Product P_B"]
  • Consequence 1: a minor conformer can give the major product if its transition state is lower.
  • Consequence 2: if interconversion is slow compared with reaction (a “kinetic quench”), the product ratio simply reflects the starting conformer ratio.
  • Winstein–Holness equation (overall rate, same conditions): \( k_{\text{obs}} = x_A k_A + x_B k_B \), where \( x_A, x_B \) are mole fractions. This governs rates; Curtin–Hammett governs product ratios.

Physical consequences

  • ³J(H,H) coupling follows the Karplus relation: largest for anti-periplanar protons (θ near 180°), smallest near 90°, intermediate near 0°. Averaged couplings in an acyclic compound are population-weighted, which is how NMR measures conformer ratios.
  • Dipole moments, IR bands (a separate C–Cl stretch for gauche and anti conformers of 1,2-dichloroethane) and temperature-dependent spectra report on populations.

Memory Tricks

Don’t Confuse

ThisIs not this
Conformers: interconvert by bond rotation, normally fastConfigurational isomers: interconvert only by breaking bonds
Atropisomers: conformers with a barrier high enough (\( t_{1/2} \ge 1000 \) s) to isolateordinary rotamers
Gauche (syn-clinal, θ ≈ 60°), a minimumEclipsed (θ = 0° or 120°), a maximum
Torsional strain: eclipsing of bondsSteric strain: non-bonded contact of atoms
Curtin–Hammett: product ratio from ΔG‡ of TSs (fast interconversion)Kinetic quench: product ratio = conformer ratio (slow interconversion)
Winstein–Holness: overall rateCurtin–Hammett: product ratio

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not taken from any CSIR NET paper. Use R = 8.314 J K⁻¹ mol⁻¹ and T = 298 K unless told otherwise.

Level 1: Foundation

  1. Give the Klyne–Prelog name for a torsion angle of 60°.
  2. Which conformer of 1,2-difluoroethane is more stable in the gas phase?
  3. What is the approximate barrier corresponding to Ōki’s 1000 s half-life criterion at 300 K?
Answers
  1. Syn-clinal (gauche).
  2. Gauche (the gauche effect: two σ(C–H) → σ*(C–F) anti-periplanar interactions).
  3. About 92 kJ mol⁻¹. \( k = \ln 2/1000 = 6.93\times10^{-4}\ \text{s}^{-1} \); \( \Delta G^\ddagger = RT\ln(k_BT/hk) \approx 92 \) kJ mol⁻¹ at 300 K.

Level 2: Part B Style

Practice Q1. The correct order of energy for conformations of n-butane about C2–C3 is

(a) anti < gauche < eclipsed (θ = 120°) < fully eclipsed (θ = 0°) (b) gauche < anti < eclipsed (θ = 120°) < fully eclipsed (θ = 0°) (c) anti < eclipsed (θ = 120°) < gauche < fully eclipsed (θ = 0°) (d) anti < gauche < fully eclipsed (θ = 0°) < eclipsed (θ = 120°)

Answer: (a)

Using the increments: anti 0; gauche 3.8; 120°-eclipsed 2 × 6 + 4 = 16; fully eclipsed 11 + 2 × 4 = 19 kJ mol⁻¹.

Practice Q2. At 298 K, the percentage of the anti conformer of n-butane, taking the gauche form as 3.8 kJ mol⁻¹ higher and ignoring eclipsed forms, is closest to

(a) 50% (b) 70% (c) 82% (d) 95%

Answer: (b)

\( N_g/N_a = 2e^{-3800/(8.314\times298)} = 2 \times 0.216 = 0.43 \). Anti fraction = 1/1.43 = 0.70. Option (c) is what you get if you forget the factor of 2 (1/1.216 = 0.82).

Practice Q3. In which compound does the gauche conformer about the central C–C bond become more populated in a polar solvent than in the gas phase, because the anti conformer has zero dipole moment?

(a) ethane (b) 1,2-dichloroethane (c) 2,2,3,3-tetramethylbutane (d) propane

Answer: (b)

The anti conformer of ClCH₂CH₂Cl has \( C_{2h} \) symmetry and no dipole; the gauche conformer is polar and is stabilised by polar solvents. The other molecules have no conformers differing in dipole moment (or, for (c), only one kind of staggered conformer).

Practice Q4. Iodide-induced anti debromination of racemic (dl)-1,2-dibromo-1,2-diphenylethane gives mainly

(a) (E)-stilbene (b) (Z)-stilbene (c) a 1:1 mixture of (E)- and (Z)-stilbene (d) diphenylacetylene

Answer: (b)

Place the two Br atoms anti-periplanar in the (R,R) or (S,S) isomer. The two phenyl groups then fall on the same side of the developing double bond, giving (Z)-stilbene. The meso isomer, by the same analysis, gives (E)-stilbene, the reverse of the anti addition of Br₂ to (E)-stilbene that forms the meso dibromide.

Level 3: Part C Style

Practice Q5. Two conformers A and B of a substrate interconvert with a barrier of about 40 kJ mol⁻¹. B lies 4.0 kJ mol⁻¹ above A. A reacts through TS_A to give P_A and B reacts through TS_B to give P_B. On a common scale, TS_A is 60.0 kJ mol⁻¹ above A and TS_B is 57.0 kJ mol⁻¹ above A. Both reaction barriers are much higher than the interconversion barrier. T = 298 K.

Which statements are correct?

  1. The equilibrium ratio [A]:[B] is about 5:1.
  2. P_B is the major product, formed in about 77%.
  3. The product ratio would equal [A]:[B] if interconversion were much slower than the reactions.
  4. The product ratio P_B:P_A equals \( k_B/k_A \approx 17 \).

(a) 1, 2 and 3 only (b) 1 and 2 only (c) 2 and 4 only (d) 1, 3 and 4 only

Answer: (a) 1, 2 and 3 only
  1. Correct. \( K = [B]/[A] = e^{-4000/(8.314\times298)} = 0.199 \), so [A]:[B] ≈ 5.0:1.
  2. Correct. Curtin–Hammett: \( P_B/P_A = e^{(60.0-57.0)\times1000/(8.314\times298)} = e^{1.21} = 3.35 \); fraction P_B = 3.35/4.35 = 0.77.
  3. Correct. Under a kinetic quench each conformer is converted to its own product without re-equilibrating, so the products mirror the starting ratio.
  4. Wrong. \( k_B/k_A \) compares barriers measured from each conformer: B’s barrier is 57.0 − 4.0 = 53.0, A’s is 60.0, so \( k_B/k_A = e^{7000/RT} \approx 16.8 \). The product ratio is \( K\,k_B/k_A = 0.199 \times 16.8 = 3.35 \), not 16.8.

Practice Q6. Consider rotation about C2–C3 of 2-methylbutane, using 3.8 kJ mol⁻¹ per Me/Me gauche interaction and T = 298 K.

Which statements are correct?

  1. There are three staggered conformers, two of which have the same energy.
  2. The lowest-energy staggered conformers each have one Me/Me gauche interaction.
  3. The highest-energy staggered conformer makes up about 10% of the staggered population.
  4. The two lowest-energy staggered conformers are identical (superimposable).

(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only

C2 carries CH₃, CH₃ and H; C3 carries CH₃, H and H (plus C1/C4 as the chain).

  1. Correct. The C3 methyl can be anti to either C2 methyl (two conformers) or anti to C2–H (one conformer).
  2. Correct. Anti to one methyl means gauche to the other: one Me/Me gauche (3.8). Anti to H means gauche to both: 7.6 kJ mol⁻¹.
  3. Correct. Relative weights 1 : 1 : \( e^{-3800/RT} = 0.216 \); fraction = 0.216/2.216 = 0.097.
  4. Wrong. They are non-superimposable mirror images (enantiomeric conformers), which is why they are equal in energy.

Quick Revision Table

IdeaFact
Ethane barrier≈ 12 kJ mol⁻¹ (3 × H/H eclipsing)
Propane barrier≈ 14 kJ mol⁻¹
IncrementsH/H 4.0; H/Me 6.0; Me/Me eclipsed 11; Me/Me gauche 3.8 kJ mol⁻¹
Butane orderanti < gauche < eclipsed 120° < fully eclipsed 0°
Butane populations, 298 K≈ 70% anti, 30% gauche (degeneracy 2)
Gauche effect1,2-difluoroethane; σ(C–H) → σ*(C–F)
H-bond gaucheethylene glycol, 2-fluoroethanol (non-polar media)
CarbonylsC–H or C–Me eclipses C=O in the preferred conformer
A(1,3) strainallylic C–H eclipses C=C when a cis substituent is present
Atropisomer\( t_{1/2} \ge 1000 \) s; ≈ 92 kJ mol⁻¹ at 300 K
Curtin–Hammettproduct ratio = \( e^{-\Delta\Delta G^\ddagger/RT} \) of the two TSs
Winstein–Holness\( k_{\text{obs}} = x_Ak_A + x_Bk_B \)
E2H and leaving group anti-periplanar

Key Takeaways

What’s Next