Skip to content

Bonding in Heteronuclear Molecules: Polarity and Multicentre Bonds

CSIR NET chemistry: MO diagrams of HF, CO, NO and CN-, dipole moments, percent ionic character, Fajans' rules, Walsh AH2, 3c-2e and 3c-4e bonding.

  • 16 min read
  • Updated
On this page · 17 sections
  1. Prerequisites
  2. The Hook: The Dipole That Points the Wrong Way
  3. Heteronuclear Diatomic MOs: What Changes
  4. Hydrogen Fluoride
  5. CO, CN⁻ and NO⁺: The N₂ Family
  6. NO and Its Ions
  7. Bond Polarity and Dipole Moment
  8. Fajans’ Rules: Covalent Character in Ionic Compounds
  9. Polyatomic Molecules: The Walsh Diagram for AH₂
  10. Multicentre Bonding
  11. Memory Tricks
  12. Don’t Confuse
  13. Common Mistakes
  14. Practice
  15. Quick Revision Table
  16. Key Takeaways
  17. What’s Next

Prerequisites

The Hook: The Dipole That Points the Wrong Way

Heteronuclear Diatomic MOs: What Changes

When the two atoms differ, their atomic orbitals start at different energies. The LCAO rules are the same as for homonuclear molecules, with three consequences:

  1. The bonding MO is weighted towards the more electronegative atom (the lower-energy atomic orbital), and the antibonding MO towards the less electronegative atom.
  2. A larger energy gap means weaker mixing: the bond becomes more polar, and at the limit (a very large gap) the “bonding” orbital is simply an atomic orbital on the electronegative atom: an ionic bond.
  3. Orbitals with no partner of matching symmetry and energy stay non-bonding. There is no g/u label, because there is no centre of inversion.

Hydrogen Fluoride

H contributes one 1s orbital; F contributes 2s and 2p.

  • The F 2s orbital is far below H 1s and barely mixes: it is essentially a non-bonding F lone pair.
  • H 1s and F 2p\( _z \) (along the bond) have matching σ symmetry: they form a bonding σ MO, weighted strongly towards F, and an antibonding σ* weighted towards H.
  • F 2p\( _x \) and 2p\( _y \) have π symmetry and nothing on H to combine with: a non-bonding π pair, two more lone pairs on F.

Eight valence electrons fill the F 2s, the σ bonding and the two π non-bonding orbitals. Bond order 1, with three lone pairs on F, exactly as the Lewis structure says. Because the bonding pair sits mostly on F, the bond is strongly polar, \( \text{H}^{\delta+}\text{F}^{\delta-} \).

CO, CN⁻ and NO⁺: The N₂ Family

CO, CN⁻, NO⁺ and C₂²⁻ are isoelectronic with N₂ (10 valence electrons). They have the same orbital ordering (s–p mixing is significant), the same configuration and bond order 3. Using valence labels:

$$\text{CO:}\quad 1\sigma^2\, 2\sigma^2\, 1\pi^4\, 3\sigma^2 \qquad (\text{LUMO } 2\pi^*)$$

The difference from N₂ lies in where each orbital is concentrated:

OrbitalCharacter in COConsequence
1σmostly O 2sO-centred
2σlargely O-based, roughly non-bondingapproximately an O lone pair
1πbonding, larger on Othe two π bonds are polarised towards O
3σ (HOMO)essentially non-bonding, concentrated on C, pointing away from Oa C lone pair: CO is a σ-donor through carbon
2π (LUMO)*antibonding, larger on CCO is a π-acceptor through carbon

This explains three facts:

  • CO binds metals through carbon: the HOMO (donor) and the LUMO (acceptor) both have their largest lobes on C. σ-donation plus π back-donation is the synergic bonding of metal carbonyls.
  • The small dipole with C negative: the polar σ and π bonding pairs (drawn towards O) are almost cancelled by the C-centred lone-pair HOMO pointing outwards. The net moment is about 0.11 D with the carbon end negative.
  • Back-donation weakens the C–O bond: electrons entering the 2π* orbital lower the bond order. Free CO absorbs at 2143 cm⁻¹; in metal carbonyls the C–O stretch moves to lower wavenumber, the more so the more electron-rich the metal.

Free CO has one of the strongest chemical bonds known (bond order 3, bond length about 113 pm).

NO and Its Ions

NO has 11 valence electrons: one more than CO, entering the antibonding 2π* orbital.

SpeciesValence e⁻Bond orderUnpaired e⁻N–O length
NO⁺ (nitrosonium)1030about 106 pm
NO112.51about 115 pm
NO⁻1222 (like O₂)longer

NO is a stable odd-electron molecule and is paramagnetic. Its unpaired electron is in a π* orbital, so it is easily removed (NO is readily oxidised to NO⁺), and NO⁺ has the shorter, stronger bond and the higher stretching frequency.

Bond Polarity and Dipole Moment

A polar bond has a dipole moment \( \mu = q\,d \), where \( q \) is the separated charge and \( d \) the bond length. The unit is the debye:

$$1\ \text{D} = 3.336 \times 10^{-30}\ \text{C m}$$

A full electronic charge separated by 100 pm gives \( \mu = (1.602 \times 10^{-19})(1.00 \times 10^{-10}) / (3.336 \times 10^{-30}) = 4.80 \) D. This is the one number to remember.

Percentage ionic character

Compare the observed moment with the moment of a fully ionic bond of the same length:

$$\boxed{\%\ \text{ionic character} = \frac{\mu_{\text{obs}}}{e\,d} \times 100 = \frac{\mu_{\text{obs}}\,(\text{D})}{4.80 \times d\,(\text{in 100 pm})} \times 100}$$
Molecule\( \mu_{\text{obs}} \) (D)d (pm)\( \mu_{\text{ionic}} \) (D)% ionic
HF1.8291.74.40about 41
HCl1.08127.46.12about 18
HBr0.82141.46.79about 12
HI0.44160.97.73about 6

Estimating ionic character from electronegativity

Two empirical formulas use the electronegativity difference \( \Delta\chi \):

$$\text{Pauling:}\quad \%\ \text{ionic} = 100\left[1 - e^{-(\Delta\chi)^2/4}\right] \qquad \text{Hannay–Smyth:}\quad \%\ \text{ionic} = 16\,\Delta\chi + 3.5\,(\Delta\chi)^2$$

For HCl (\( \Delta\chi = 0.96 \)): Pauling gives about 21%, Hannay–Smyth about 19%, against about 18% from the dipole moment. On the Pauling formula, a bond is 50% ionic at \( \Delta\chi \approx 1.7 \), the usual rule-of-thumb boundary between “polar covalent” and “ionic”. Treat both formulas as rough estimates.

Molecular dipole moments

A molecule’s dipole moment is the vector sum of its bond moments and lone-pair moments, so shape decides it.

  • Zero for symmetric shapes: CO₂, BF₃, CH₄, CCl₄, PCl₅, SF₆, XeF₂, XeF₄, trans-dichloroethene.
  • Non-zero for H₂O (about 1.85 D), NH₃, SO₂, SF₄, ClF₃, BrF₅, cis-dichloroethene.

Fajans’ Rules: Covalent Character in Ionic Compounds

Real ionic compounds have some covalent character because the cation distorts (polarises) the anion’s electron cloud. Polarisation, and therefore covalent character, increases when:

  1. The cation is small and highly charged (high polarising power): AlCl₃ is more covalent than MgCl₂, which is more covalent than NaCl.
  2. The anion is large and highly charged (high polarisability): LiI is more covalent than LiF; sulfides are more covalent than oxides.
  3. The cation has a non-noble-gas configuration (an 18-electron or “pseudo-noble-gas” shell, e.g. Cu⁺, Ag⁺, Zn²⁺, Hg²⁺): d electrons shield the nucleus poorly, so these cations polarise more than noble-gas-configured cations of similar size. CuCl and AgCl are much more covalent than NaCl, which shows up as lower melting points and lower water solubility.

Consequences you will be asked about: increasing covalent character usually means lower melting point, lower solubility in water, higher solubility in organic solvents, and deeper colour (for example AgI is yellow and AgCl white).

Polyatomic Molecules: The Walsh Diagram for AH₂

Why is BeH₂ linear and H₂O bent? A Walsh diagram follows the energy of each MO as the H–A–H angle changes from 180° to 90°.

  • In the linear molecule, the central atom’s p orbital perpendicular to the molecular axis (in the plane of bending) has no H partner: it is non-bonding.
  • On bending, that orbital can overlap with the H 1s orbitals and mix with the central atom’s s orbital. It becomes bonding and drops sharply in energy.
  • The other occupied orbitals rise only slightly on bending.

So the shape depends on whether this orbital is occupied:

Valence electronsExampleShape
4BeH₂linear (the orbital that favours bending is empty)
5 or 6BH₂ (5), CH₂ (6)bent
8H₂Obent

This MO account agrees with VSEPR for these molecules and explains it: the “lone pairs” of water are the electrons that make bending favourable.

Multicentre Bonding

Three-centre two-electron bonds: diborane

B₂H₆ has 12 valence electrons but needs eight B–H links on a Lewis count, too few for eight two-electron bonds: it is electron-deficient. The structure has four terminal B–H bonds (ordinary 2c–2e) and two bridging B–H–B units.

Each bridge is a three-centre two-electron (3c–2e) bond: one boron hybrid from each B and the H 1s orbital combine into one bonding, one non-bonding and one antibonding MO. Two electrons fill the bonding MO and hold three atoms together, so each B–H link in the bridge has bond order 0.5. Accordingly the bridging B–H bonds are longer (about 133 pm) than the terminal ones (about 119 pm). Each B is roughly sp³ hybridised, with the terminal H atoms in one plane and the bridging H atoms above and below it.

The same 3c–2e idea describes the bridging methyl groups in Al₂(CH₃)₆ and the bonding in non-classical carbocations; it is the basis for the cluster-counting rules in the cages and metal clusters unit of the syllabus.

Three-centre four-electron bonds: XeF₂, I₃⁻, HF₂⁻

In linear XeF₂ consider the Xe 5p\( _z \) orbital and one p orbital on each F, all along the axis. They combine into three MOs:

MOCharacterOccupancy
bondingall in phase, spread over F–Xe–F2 e⁻
non-bondingon the two F atoms only (node at Xe)2 e⁻
antibondingout of phaseempty

Four electrons fill the bonding and non-bonding MOs. Two bonding electrons hold two Xe–F links: bond order 0.5 for each Xe–F. The non-bonding pair puts extra negative charge on the terminal fluorines. This 3c–4e model (Rundle–Pimentel) explains, without any d orbitals:

  • why such molecules need electronegative terminal atoms (F, O, Cl) that can carry the extra charge;
  • why the bonds are longer and weaker than ordinary single bonds;
  • the bonding in I₃⁻, ICl₂⁻ and the symmetric hydrogen bond in [F–H–F]⁻.

Hypervalent molecules without d orbitals: SF₆

Six S–F bonds would need twelve electrons around sulfur. In the MO picture of octahedral SF₆, sulfur’s 3s and three 3p orbitals combine with six fluorine σ orbitals to give four bonding MOs (\( a_{1g} + t_{1u} \)), the matching antibonding MOs, and two non-bonding MOs (\( e_g \)) located on the fluorines.

Twelve valence electrons fill the four bonding MOs (8 e⁻) and the two non-bonding ones (4 e⁻). Eight bonding electrons spread over six bonds gives each S–F bond an order of \( \frac{4}{6} = \frac{2}{3} \). Sulfur’s octet is never exceeded in the bonding MOs; the “extra” electrons are on fluorine. As noted in Electronegativity and Periodic Anomalies, calculations show d-orbital participation in such molecules is small.

Memory Tricks

Don’t Confuse

ThisvsThat
3c–2e (B₂H₆ bridge): electron-deficient, bond order 0.5 per link3c–4e (XeF₂): electron-rich, bond order 0.5 per link, charge on terminal atoms
CO bond order 3, diamagneticNO bond order 2.5, paramagnetic
NO⁺: bond order 3, shorterNO⁻: bond order 2, two unpaired e⁻
Bond dipole (from Δχ)molecular dipole (vector sum, depends on shape)
% ionic from μ: experimental% ionic from Δχ: empirical estimate

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. What is the bond order of NO⁺?
  2. Which atom of CO binds to a metal in metal carbonyls?
  3. How many 3c–2e bonds are there in B₂H₆?
Answers
  1. 3. 10 valence electrons, isoelectronic with N₂.
  2. Carbon: the HOMO and LUMO are both concentrated on C.
  3. Two, the B–H–B bridges.

Level 2: Part B Style

Practice Q1. A gaseous diatomic molecule AB has a dipole moment of 1.50 D and a bond length of 150 pm (hypothetical data). Its percentage ionic character is closest to:

(a) 10% (b) 21% (c) 31% (d) 48%

Answer: (b) 21%

\( \mu_{\text{ionic}} = 4.80 \times 1.50 = 7.20 \) D. \( \%\text{ ionic} = \frac{1.50}{7.20} \times 100 = 20.8\% \).

Practice Q2. Which of the following is paramagnetic?

(a) CO (b) CN⁻ (c) NO⁺ (d) NO

Answer: (d) NO

CO, CN⁻ and NO⁺ have 10 valence electrons (isoelectronic with N₂): all paired. NO has 11; the extra electron is alone in 2π*.

Practice Q3. Arrange in order of increasing covalent character: NaCl, MgCl₂, AlCl₃.

(a) NaCl < MgCl₂ < AlCl₃ (b) AlCl₃ < MgCl₂ < NaCl (c) MgCl₂ < NaCl < AlCl₃ (d) NaCl < AlCl₃ < MgCl₂

Answer: (a)

Same anion; cation charge rises (1+, 2+, 3+) and size falls from Na⁺ to Al³⁺, so polarising power and covalent character rise. AlCl₃ is essentially covalent (it sublimes and dimerises to Al₂Cl₆).

Practice Q4. Which molecule has a zero dipole moment?

(a) SF₄ (b) ClF₃ (c) XeF₄ (d) BrF₅

Answer: (c) XeF₄

XeF₄ is square planar and centrosymmetric: the four Xe–F moments cancel and the two trans lone pairs cancel. SF₄ (see-saw), ClF₃ (T-shaped) and BrF₅ (square pyramidal) are all polar.

Level 3: Part C Style

Practice Q5. Consider the statements about CO:

  1. Its HOMO is concentrated on carbon.
  2. Its LUMO is a π* orbital with a larger coefficient on carbon.
  3. π back-donation from a metal into the LUMO increases the C–O stretching frequency.
  4. Its bond order is 3.

Which are correct?

(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 4 only

Statement 3 is the trap: populating the antibonding 2π* orbital lowers the C–O bond order and the stretching frequency (free CO 2143 cm⁻¹; lower in metal carbonyls). Statements 1, 2 and 4 are correct.

Practice Q6. Using the Pauling relation \( \%\text{ ionic} = 100[1 - e^{-(\Delta\chi)^2/4}] \) and the Hannay–Smyth relation \( 16\Delta\chi + 3.5(\Delta\chi)^2 \), the percentage ionic character for a bond with \( \Delta\chi = 2.0 \) is, respectively:

(a) 63% and 46% (b) 46% and 63% (c) 39% and 46% (d) 63% and 32%

Answer: (a) 63% and 46%

Pauling: \( (\Delta\chi)^2/4 = 1.0 \); \( 1 - e^{-1} = 1 - 0.368 = 0.632 \), so about 63%.

Hannay–Smyth: \( 16(2.0) + 3.5(4.0) = 32 + 14 = 46\% \).

The two empirical scales disagree by more than 15 percentage points at large \( \Delta\chi \): use whichever formula the question gives.

Practice Q7. Consider the statements:

  1. In the 3c–4e model of XeF₂, each Xe–F bond has a bond order of 0.5.
  2. In SF₆, the MO model gives four bonding MOs and an S–F bond order of 2/3.
  3. The bridging B–H bonds in B₂H₆ are shorter than the terminal B–H bonds.
  4. BeH₂ is linear because, with four valence electrons, the orbital stabilised by bending is empty.

Which are correct?

(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 4 only
  1. Correct. Two bonding electrons over two links.
  2. Correct. \( a_{1g} + t_{1u} \) bonding (4 MOs, 8 e⁻) over six bonds: \( 4/6 = 2/3 \).
  3. Wrong. Bridging B–H (about 133 pm) is longer than terminal (about 119 pm); each bridge link has bond order 0.5.
  4. Correct. The Walsh argument.

Quick Revision Table

IdeaFact
Heteronuclear MOsbonding on the more EN atom; antibonding on the less EN atom
HFF 2s and 2p\( _{x,y} \) non-bonding; one σ bond; bond order 1
N₂ family (10 e⁻)CO, CN⁻, NO⁺, C₂²⁻: bond order 3, diamagnetic
COHOMO 3σ on C; LUMO 2π* larger on C; μ ≈ 0.11 D, C⁻; ν = 2143 cm⁻¹
NO11 e⁻, bond order 2.5, paramagnetic; NO⁺ 3 (106 pm), NO 115 pm
Dipole1 D = 3.336 × 10⁻³⁰ C m; e × 100 pm = 4.80 D
% ionic\( \mu_{\text{obs}}/(e\,d) \): HF ≈ 41, HCl ≈ 18, HBr ≈ 12, HI ≈ 6
From ΔχPauling \( 100[1 - e^{-(\Delta\chi)^2/4}] \); Hannay–Smyth \( 16\Delta\chi + 3.5\Delta\chi^2 \)
NH₃ vs NF₃1.47 D vs 0.23 D (lone pair adds vs opposes)
Fajanssmall, highly charged cation; large anion; 18-electron cation: more covalent
Walsh AH₂4 e⁻ linear (BeH₂); 5–8 e⁻ bent (BH₂, CH₂, H₂O)
3c–2eB₂H₆ bridges; bridging B–H ≈ 133 pm > terminal ≈ 119 pm
3c–4eXeF₂, I₃⁻, HF₂⁻: bond order 0.5 per link
SF₆ (MO)4 bonding MOs + 2 non-bonding; S–F bond order 2/3

Key Takeaways

What’s Next

Advertisement
Advertisement