Skip to content

VSEPR Theory and the Shapes of Molecules

CSIR NET chemistry: VSEPR postulates, steric number, AXnEm shapes from 2 to 7 electron pairs, lone-pair placement, interhalogens and xenon fluorides.

  • 14 min read
  • Updated
On this page · 17 sections
  1. Prerequisites
  2. The Hook: Why ClF₃ Is Not Flat Like BF₃
  3. The Postulates
  4. The Procedure
  5. The Shape Table
  6. Where the Lone Pairs Go
  7. The Xenon Compounds in One Table
  8. Interhalogens and Polyhalide Ions
  9. Isoelectronic Means Isostructural
  10. Odd-Electron Species
  11. Memory Tricks
  12. Don’t Confuse
  13. Common Mistakes
  14. Practice
  15. Quick Revision Table
  16. Key Takeaways
  17. What’s Next

Prerequisites

The Hook: Why ClF₃ Is Not Flat Like BF₃

The Postulates

VSEPR postulates (Gillespie–Nyholm)
  1. The electron pairs in the valence shell of the central atom, bonding and non-bonding, arrange themselves as far apart as possible to minimise repulsion.
  2. A multiple bond is treated as a single electron domain (larger than a single bond).
  3. Repulsions decrease in the order lone pair–lone pair > lone pair–bond pair > bond pair–bond pair.
  4. Bonds to more electronegative atoms occupy less space near the central atom than bonds to less electronegative atoms.
  5. In a filled valence shell, repulsions between domains at 90° matter far more than those at 120° or more.

The shape of the molecule is described by the positions of the atoms only. The arrangement of all electron domains (bonds and lone pairs) is the electron-pair geometry; the arrangement of the atoms is the molecular shape. CH₄, NH₃ and H₂O all have tetrahedral electron-pair geometry, but their shapes are tetrahedral, trigonal pyramidal and bent.

Why lone pairs repel more: a lone pair is held by one nucleus only, so its density spreads wider and sits closer to the central atom than a bonding pair, which is drawn out towards the ligand.

The Procedure

graph TD
    A[Formula and charge] --> B[Draw Lewis structure or use the counting formula]
    B --> C[Steric number = bonded atoms + lone pairs on central atom]
    C --> D[Electron-pair geometry from SN]
    D --> E[Place lone pairs to minimise 90 degree lone-pair repulsions]
    E --> F[Name the shape from atom positions only]
    F --> G[Adjust angles: lone pairs and multiple bonds squeeze, EN ligands shrink]

Counting the steric number

The steric number (SN) is the number of atoms bonded to the central atom plus the number of lone pairs on it. Multiple bonds count once.

For molecules where the central atom is bonded to monovalent atoms (H, halogens) and/or doubly-bonded oxygen or sulfur, a quick count is

$$\boxed{\text{SN} = \tfrac{1}{2}\left(V + M - c + a\right)}$$

where \( V \) = valence electrons of the central atom, \( M \) = number of monovalent atoms attached, \( c \) = positive charge, \( a \) = magnitude of negative charge. Divalent atoms (=O, =S) add nothing to the count but still occupy a position.

The formula fails for odd-electron species (NO₂, ClO₂: it gives a half-integer) and when the central atom is bonded to groups other than monovalent atoms or terminal O/S. For those, draw the Lewis structure.

The Shape Table

AXₙEₘ shapes (A = central atom, X = bonded atom, E = lone pair)
SNElectron-pair geometryTypeShapeExamples
2linearAX₂linearBeCl₂ (gas), CO₂, HgCl₂, NO₂⁺
3trigonal planarAX₃trigonal planarBF₃, SO₃, NO₃⁻, CO₃²⁻
3AX₂Ebent (< 120°)SO₂, O₃, NO₂⁻, SnCl₂ (gas)
4tetrahedralAX₄tetrahedralCH₄, NH₄⁺, SO₄²⁻, ClO₄⁻, XeO₄
4AX₃Etrigonal pyramidalNH₃, PCl₃, H₃O⁺, ClO₃⁻, XeO₃
4AX₂E₂bent (< 109.5°)H₂O, OF₂, SCl₂, ClO₂⁻
5trigonal bipyramidalAX₅trigonal bipyramidalPCl₅ (gas), PF₅, AsF₅
5AX₄Esee-sawSF₄, SeF₄, TeCl₄, XeO₂F₂, IF₄⁺
5AX₃E₂T-shapedClF₃, BrF₃, XeOF₂
5AX₂E₃linearXeF₂, I₃⁻, ICl₂⁻
6octahedralAX₆octahedralSF₆, PF₆⁻, SiF₆²⁻
6AX₅Esquare pyramidalBrF₅, IF₅, XeOF₄, XeF₅⁺
6AX₄E₂square planarXeF₄, ICl₄⁻, BrF₄⁻
7pentagonal bipyramidalAX₇pentagonal bipyramidalIF₇
7AX₆Edistorted octahedralXeF₆ (gas)
7AX₅E₂pentagonal planarXeF₅⁻

Where the Lone Pairs Go

Steric number 5: lone pairs are equatorial

A trigonal bipyramid has two kinds of position. An axial position has three neighbours at 90°; an equatorial position has only two neighbours at 90° (the axial pair) and two at 120°. Large domains go where they meet the fewest 90° interactions, so lone pairs and multiple bonds occupy equatorial positions.

The same rule places:

  • the single lone pair of SF₄ equatorial: a see-saw, with F(axial)–S–F(axial) about 173° and F(eq)–S–F(eq) about 102°, both compressed from 180° and 120°;
  • the three lone pairs of XeF₂ and I₃⁻ all equatorial: the two atoms are axial and the molecule is linear;
  • the oxygen atoms of XeO₂F₂ equatorial (Xe=O bonds are bigger domains), with the two F atoms axial: a see-saw.

Steric number 6: lone pairs are trans

In an octahedron all six positions are equivalent, so one lone pair can go anywhere (AX₅E, square pyramidal). A second lone pair goes trans to the first, to avoid a lone pair–lone pair interaction at 90°. That gives the square planar shape of XeF₄ and ICl₄⁻.

In square pyramidal BrF₅ and IF₅ the lone pair pushes the four basal fluorines up towards the apical one, so the apical-to-basal F–X–F angles are a little less than 90°.

Steric number 7

IF₇ is a pentagonal bipyramid. XeF₆ has six bonds and one lone pair (SN 7). In the gas phase it is a distorted octahedron, not a regular one: the lone pair is stereochemically active and the molecule is fluxional, moving between distorted forms. The XeF₅⁻ anion has two lone pairs on the axis and five fluorines in a plane: pentagonal planar.

The Xenon Compounds in One Table

SpeciesSNLone pairsShape
XeF₂53linear
XeF₄62square planar
XeF₆71distorted octahedral
XeO₃41trigonal pyramidal
XeO₄40tetrahedral
XeOF₂52T-shaped
XeO₂F₂51see-saw
XeOF₄61square pyramidal
XeO₃F₂50trigonal bipyramidal
XeF₅⁺61square pyramidal
XeF₅⁻72pentagonal planar

A short way to the lone-pair count for xenon species: xenon has 8 valence electrons; each F uses one, each O uses two (as Xe=O), a positive charge removes one. Lone pairs = (remaining electrons)/2. XeOF₄: \( 8 - 4 - 2 = 2 \), one lone pair.

Interhalogens and Polyhalide Ions

TypeExampleSNShape
XYClF, ICl–linear diatomic
XY₃ClF₃, BrF₃5T-shaped
XY₅BrF₅, IF₅6square pyramidal
XY₇IF₇7pentagonal bipyramidal
XY₂⁻ICl₂⁻, I₃⁻5linear
XY₄⁻ICl₄⁻, BrF₄⁻6square planar
XY₂⁺ICl₂⁺, ClF₂⁺4bent
XY₄⁺IF₄⁺5see-saw

Interhalogens XYₙ always have \( n \) odd (1, 3, 5, 7), so that the total number of valence electrons is even. The larger, less electronegative halogen is the central atom.

Isoelectronic Means Isostructural

Species with the same number of atoms and the same number of valence electrons usually have the same shape. This is the quickest check in Part B.

Valence electronsSpeciesShape
16 (3 atoms)CO₂, N₃⁻, NO₂⁺, OCN⁻, SCN⁻linear
18 (3 atoms)O₃, SO₂, NO₂⁻bent
24 (4 atoms)BF₃, CO₃²⁻, NO₃⁻, SO₃trigonal planar
26 (4 atoms)ClO₃⁻, SO₃²⁻, XeO₃, IO₃⁻ (all AX₃E)trigonal pyramidal
32 (5 atoms)ClO₄⁻, SO₄²⁻, PO₄³⁻, XeO₄, SiO₄⁴⁻tetrahedral
22 (3 atoms)XeF₂, I₃⁻, ICl₂⁻linear
36 (5 atoms)XeF₄, ICl₄⁻, BrF₄⁻square planar

Odd-Electron Species

A single unpaired electron is a domain smaller than a lone pair. NO₂ shows the effect neatly:

SpeciesNon-bonding electrons on NO–N–O angle
NO₂⁺0180°
NO₂1about 134°
NO₂⁻2about 115°

One electron bends the molecule less than a full lone pair does.

Memory Tricks

Don’t Confuse

ThisvsThat
Electron-pair geometry (bonds + lone pairs)molecular shape (atoms only)
ClF₃: T-shaped, SN 5, 2 lone pairsBF₃: trigonal planar, SN 3, no lone pair
SF₄: see-saw (AX₄E)XeF₄: square planar (AX₄E₂)
XeOF₄: square pyramidalXeO₂F₂: see-saw
XeF₆ gas: distorted octahedronSF₆: regular octahedron
I₃⁻ and XeF₂: linearICl₂⁺ and ClF₂⁺: bent

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. What is the shape of XeF₄?
  2. How many lone pairs are there on the central atom of I₃⁻?
  3. Give the shape of BrF₅.
Answers
  1. Square planar. SN \( \frac{1}{2}(8 + 4) = 6 \), two lone pairs trans.
  2. 3. SN \( \frac{1}{2}(7 + 2 + 1) = 5 \), two bonded atoms, so three lone pairs (all equatorial; the ion is linear).
  3. Square pyramidal. SN \( \frac{1}{2}(7 + 5) = 6 \), one lone pair.

Level 2: Part B Style

Practice Q1. Which pair of species has the same shape?

(a) XeF₂ and ICl₂⁺ (b) SF₄ and XeF₄ (c) ICl₄⁻ and XeF₄ (d) NH₃ and BF₃

Answer: (c)

ICl₄⁻: \( \frac{1}{2}(7 + 4 + 1) = 6 \), four bonds, two lone pairs: square planar. XeF₄: same count, square planar. The two are isoelectronic (36 valence electrons).

(a): XeF₂ is linear, ICl₂⁺ is bent. (b): SF₄ is see-saw, XeF₄ square planar. (d): NH₃ is pyramidal, BF₃ planar.

Practice Q2. The shape of XeOF₄ is:

(a) octahedral (b) square pyramidal (c) see-saw (d) trigonal bipyramidal

Answer: (b) square pyramidal

Xe has 8 valence electrons; four F use 4 and the double-bonded O uses 2, leaving 2 (one lone pair). Five atoms plus one lone pair: SN 6, AX₅E, square pyramidal. The O sits at the apex, trans to the lone pair.

Practice Q3. In the trigonal bipyramidal electron-pair geometry, lone pairs occupy equatorial positions because an equatorial position has:

(a) three neighbours at 90° (b) two neighbours at 90° (c) four neighbours at 90° (d) no neighbours at 90°

Answer: (b)

An equatorial site has the two axial sites at 90° and two equatorial sites at 120°. An axial site has three equatorial neighbours at 90°. Fewer 90° contacts means less repulsion for the bulky lone pair.

Practice Q4. The total number of lone pairs on the central atoms of ClF₃, XeF₂ and SF₄ taken together is:

(a) 4 (b) 5 (c) 6 (d) 7

Answer: (c) 6

ClF₃: \( \frac{1}{2}(7 + 3) = 5 \), 3 bonds, 2 lone pairs. XeF₂: \( \frac{1}{2}(8 + 2) = 5 \), 2 bonds, 3 lone pairs. SF₄: \( \frac{1}{2}(6 + 4) = 5 \), 4 bonds, 1 lone pair. Total \( 2 + 3 + 1 = 6 \).

Level 3: Part C Style

Practice Q5. Consider the statements:

  1. ClF₃ is planar.
  2. SF₄ has a dipole moment.
  3. XeF₂ and I₃⁻ are isostructural.
  4. IF₄⁺ is square planar.

Which are correct?

(a) 1, 2 and 3 only (b) 2 and 4 only (c) 1 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  1. Correct. T-shaped: Cl and three F lie in one plane.
  2. Correct. The see-saw shape is not centrosymmetric and the lone pair adds to the bond-dipole sum, so SF₄ is polar.
  3. Correct. Both AX₂E₃, linear.
  4. Wrong. IF₄⁺: \( \frac{1}{2}(7 + 4 - 1) = 5 \), four bonds and one lone pair: see-saw, like SF₄. Square planar needs two lone pairs (as in IF₄⁻).

Practice Q6. Which of the following sets contains only species with zero lone pairs on the central atom?

(a) XeO₄, SO₄²⁻, PCl₄⁺ (b) XeO₃, ClO₃⁻, NH₃ (c) XeF₂, CO₂, BeCl₂ (d) SF₄, XeO₂F₂, IF₄⁺

Answer: (a)

XeO₄: \( 8 - 4 \times 2 = 0 \) electrons left. SO₄²⁻: \( \frac{1}{2}(6 + 2) = 4 \) with four O. PCl₄⁺: \( \frac{1}{2}(5 + 4 - 1) = 4 \) with four Cl. All tetrahedral, no lone pairs.

(b) all have one lone pair (pyramidal). (c) XeF₂ has three. (d) all have one (see-saw).

Practice Q7. For an AX₄E₂ molecule (octahedral electron-pair geometry), which arrangement of the two lone pairs is adopted, and what is the resulting shape?

(a) cis lone pairs; see-saw (b) trans lone pairs; square planar (c) cis lone pairs; square planar (d) trans lone pairs; tetrahedral

Answer: (b)

In an octahedron there are only two ways to place two lone pairs: cis (one lp–lp contact at 90°) or trans (lp–lp at 180°, no 90° lp–lp contact). The 90° lone pair–lone pair repulsion is the largest term, so trans is adopted. The four atoms then lie in the equatorial plane: square planar, as in XeF₄.

A cis arrangement would leave the four atoms in a see-saw-like distorted shape; it is not observed.

Quick Revision Table

IdeaFact
Steric numberbonded atoms + lone pairs; \( \frac{1}{2}(V + M - c + a) \)
Repulsion orderlp–lp > lp–bp > bp–bp; multiple bond > single
SN 3AX₃ trigonal planar; AX₂E bent
SN 4AX₄ tetrahedral; AX₃E pyramidal; AX₂E₂ bent
SN 5AX₅ TBP; AX₄E see-saw; AX₃E₂ T-shaped; AX₂E₃ linear
SN 6AX₆ octahedral; AX₅E square pyramidal; AX₄E₂ square planar
SN 7AX₇ pentagonal bipyramid (IF₇); AX₆E distorted octahedron (XeF₆); AX₅E₂ pentagonal planar (XeF₅⁻)
TBP placementlone pairs and multiple bonds equatorial
Octahedral placementtwo lone pairs trans
Isoelectronicusually isostructural (XeF₄ ≈ ICl₄⁻; CO₂ ≈ N₃⁻ ≈ NO₂⁺)
Odd electronNO₂⁺ 180° > NO₂ ≈ 134° > NO₂⁻ ≈ 115°

Key Takeaways

What’s Next