Skip to content

IR Spectroscopy of Organic Compounds

CSIR NET organic spectroscopy: IR group frequencies, carbonyl shifts from conjugation, ring strain and H-bonding, fingerprint bands and spectrum reading.

  • 20 min read
  • Updated
On this page · 16 sections
  1. Prerequisites
  2. The Hook: One Band, Five Compounds
  3. From the Oscillator to Group Frequencies
  4. The Correlation Table You Must Own
  5. The Carbonyl Stretch: Reading 1650–1850 cm⁻¹
  6. Hydrogen Bonding and the Dilution Test
  7. Alkenes and Aromatics: Substitution Patterns from C–H Bends
  8. Nitrogen Compounds at a Glance
  9. A Systematic Way to Read a Spectrum
  10. Memory Tricks
  11. Don’t Confuse
  12. Common Mistakes
  13. Practice
  14. Quick Revision Table
  15. Key Takeaways
  16. What’s Next

Prerequisites

  • Vibrational Spectra of Diatomic Molecules: the harmonic oscillator, \( \tilde{\nu} = \frac{1}{2\pi c}\sqrt{k/\mu} \), anharmonicity and overtones. This page uses those results without re-deriving them.
  • IR and Raman Activity: Selection Rules: why a vibration must change the dipole moment to absorb, and why symmetric stretches can be IR-silent.
  • Functional-group chemistry at BSc level: resonance, inductive effects and hydrogen bonding.

The Hook: One Band, Five Compounds

From the Oscillator to Group Frequencies

The two variables: force constant and reduced mass

Treat a bond as a harmonic spring. The fundamental absorption wavenumber is

$$\tilde{\nu} = \frac{1}{2\pi c}\sqrt{\frac{k}{\mu}}, \qquad \mu = \frac{m_1 m_2}{m_1 + m_2}$$

with \( k \) the force constant (N m⁻¹), \( \mu \) the reduced mass (kg) and \( c \) in cm s⁻¹ so that \( \tilde{\nu} \) comes out in cm⁻¹. Two qualitative rules follow at once:

ChangeEffect on \( \tilde{\nu} \)Example
Stronger bond (larger \( k \))higherC≡C (about 2100–2260) > C=C (about 1620–1680) > C–C (about 1200, weak, rarely useful)
Heavier atom (larger \( \mu \))lowerC–H about 3000, C–D about 2200; C–O about 1100, C–Cl about 750
H attached to any heavy atomhigh, isolatedO–H, N–H, C–H all above 2700 cm⁻¹
Isotope substitution

For the same force constant,

$$\frac{\tilde{\nu}(\text{X–D})}{\tilde{\nu}(\text{X–H})} = \sqrt{\frac{\mu(\text{X–H})}{\mu(\text{X–D})}}$$

For C–H/C–D this ratio is 0.734, so a C–H stretch at 2950 cm⁻¹ moves to about 2166 cm⁻¹. For O–H/O–D the ratio is 0.728 (3600 → about 2620 cm⁻¹). The ratio is close to, but not exactly, \( 1/\sqrt{2} = 0.707 \), because the carbon or oxygen is not infinitely heavy.

Why “group frequencies” work

A polyatomic molecule with \( N \) atoms has \( 3N - 6 \) normal modes (\( 3N - 5 \) if linear), and strictly every mode involves every atom. In practice a bond whose frequency is well separated from its neighbours (O–H, N–H, C–H, C≡N, C=O) vibrates almost independently. Its band appears in a narrow, transferable range: a group frequency. Where several similar bonds are coupled (C–C, C–O, C–N single bonds; bending modes), the bands are characteristic of the whole molecule: the fingerprint.

graph LR
    A["4000-2500 cm⁻¹
X-H stretches
O-H, N-H, C-H"] --> B["2500-2000 cm⁻¹
triple and cumulated
C≡N, C≡C, C=C=O, N=C=O"] B --> C["2000-1500 cm⁻¹
double bonds
C=O, C=C, C=N, NO₂ asym"] C --> D["1500-400 cm⁻¹
fingerprint
C-O, C-N, bends, oop C-H"]

The Correlation Table You Must Own

X–H stretching region (4000–2500 cm⁻¹)

BondPosition (cm⁻¹)Shape and comment
O–H, free (dilute, gas)3600–3650sharp, medium
O–H, H-bonded alcohol/phenol3200–3550broad, strong
O–H, carboxylic acid dimer2500–3300very broad, overlaps C–H; often with small “shoulders”
N–H, primary amine (–NH₂)two bands, about 3300–3500asymmetric (higher) and symmetric stretch
N–H, secondary amineone band, about 3300–3350weaker than O–H
N–H, tertiary aminenone
N–H, amideabout 3150–3500primary amide two bands, secondary one
≡C–H (terminal alkyne)about 3300sharp, strong; easily confused with N–H
=C–H (alkene, arene)3000–3100just above 3000
C–H (alkane, sp³)2850–2960just below 3000
O=C–H (aldehyde)about 2820 and 2720two weak bands (Fermi doublet)

The 3000 cm⁻¹ line is the single most useful landmark: bands above it mean sp² or sp C–H; bands only below it mean a saturated compound.

Triple and cumulated bonds (2500–2000 cm⁻¹)

GroupPosition (cm⁻¹)Comment
C≡N (nitrile)about 2210–2260sharp, medium; conjugation lowers it
C≡C, terminalabout 2100–2140weak to medium
C≡C, internalabout 2190–2260weak, absent if symmetric
N=C=O (isocyanate)about 2250–2275very strong, broad
N₃ (azide)about 2100–2160strong
C=C=O (ketene)about 2150strong
C=C=C (allene)about 1950medium
CO₂ (atmospheric, background)about 2350artefact, not the sample

Double-bond region (2000–1500 cm⁻¹)

GroupPosition (cm⁻¹)Comment
C=O1650–1850see the carbonyl section below
C=C, alkene1620–1680medium to weak; conjugation lowers and intensifies it
C=C, aromatic ringabout 1600 and 1500 (also about 1580, 1450)pairs of sharp bands
C=N1640–1690
NO₂ (nitro)about 1550 (asym) and 1350 (sym)both strong: the “nitro pair”
N–H bend, primary amine1580–1650
Amide II (N–H bend + C–N stretch)about 1510–1570 (secondary amide)

Fingerprint region (1500–400 cm⁻¹)

GroupPosition (cm⁻¹)Comment
CH₃ / CH₂ bendsabout 1375 and 1460gem-dimethyl or isopropyl splits the 1375 band into a doublet
C–O (alcohols, ethers, esters)1000–1300strong; esters show two (C(=O)–O and O–C)
C–N1020–1250
C–F / C–Cl / C–Br1000–1400 / 600–800 / 500–600heavier halogen, lower band
S=O (sulfone)about 1300 and 1150asymmetric and symmetric
=C–H out-of-plane bends650–1000substitution pattern (tables below)

The Carbonyl Stretch: Reading 1650–1850 cm⁻¹

The C=O band is the strongest in most spectra, and its exact position is the most information-rich number in the whole technique. Start from a saturated, open-chain ketone at 1715 cm⁻¹ and apply four corrections.

Baseline values

Carbonyl type (saturated, acyclic)\( \tilde{\nu}_{\text{C=O}} \) (cm⁻¹)
Acid chloride, RCOClabout 1800 (1785–1815)
Anhydride, (RCO)₂Otwo bands, about 1820 and 1760
Ester, RCO₂R′1735–1750
Aldehyde, RCHOabout 1725 (1720–1740)
Ketone, RCOR′about 1715
Carboxylic acid (H-bonded dimer)about 1710
Amide, RCONR′₂ (amide I)about 1640–1690
Carboxylate ion, RCO₂⁻about 1550–1610 (asym) and 1400 (sym)

Correction 1: inductive versus resonance effect of X in R–CO–X

Two opposing effects decide where each derivative sits:

  • Inductive withdrawal by an electronegative X pulls electron density from carbon, shortens the C=O and raises \( k \) (raises \( \tilde{\nu} \)).
  • Resonance donation by a lone pair on X (R–C(=O)–X ↔ R–C(–O⁻)=X⁺) gives the C=O partial single-bond character and lowers \( \tilde{\nu} \).
XDominant effectResult
Clstrong –I, poor resonance (3p–2p overlap)highest, about 1800
OR–I outweighs +Rabove ketone, 1735–1750
H, alkylreference1715–1730
NR₂strong +R (N is a good donor)lowest, about 1650–1690
O⁻full delocalisation over two equal C–O bondsno C=O band; two CO₂⁻ bands instead

Correction 2: conjugation lowers the frequency

Conjugation with C=C or an aryl ring delocalises the π bond, lowering its bond order. The typical drop is 20–40 cm⁻¹.

Compound\( \tilde{\nu}_{\text{C=O}} \) (cm⁻¹), approximate
Saturated ketone1715
α,β-Unsaturated ketone1665–1685
Aryl alkyl ketone (acetophenone type)1680–1690
Diaryl ketone (benzophenone type)about 1665
Saturated ester1735–1750
α,β-Unsaturated or aryl ester1715–1730

The C=C stretch of an enone is also lowered and becomes much more intense, because conjugation polarises it.

Correction 3: ring strain raises the frequency of a cyclic carbonyl

Squeezing the internal C–C(=O)–C angle below 120° forces the carbon to use more p character in the ring bonds and more s character in the C=O σ bond, which stiffens it. Each step down in ring size raises the band.

Ring sizeCycloalkanone (cm⁻¹)Lactone (cm⁻¹)Lactam (cm⁻¹)
6about 1715δ-lactone, about 1735–1750δ-lactam, about 1670
5about 1745γ-lactone, about 1770γ-lactam, about 1700
4about 1780β-lactone, about 1820–1840β-lactam, about 1730–1760

The β-lactam band of penicillins appears near 1770 cm⁻¹, far above an ordinary amide: a quick IR test that the four-membered ring is intact.

Correction 4: hydrogen bonding and field effects

  • H-bonding to the carbonyl oxygen lowers \( \tilde{\nu}_{\text{C=O}} \). Carboxylic acids exist as cyclic H-bonded dimers (C=O about 1710); the monomer, seen in dilute solution or vapour, absorbs near 1760. Methyl salicylate and o-hydroxyacetophenone, with a strong intramolecular O–H···O=C bond, absorb about 30–50 cm⁻¹ below their para isomers.
  • Electronegative α-substituents raise it when they lie close to the C=O oxygen (field effect). In α-chlorocyclohexanones the conformer with equatorial Cl (C–Cl roughly eclipsing C=O) absorbs about 20 cm⁻¹ higher than the axial conformer. This is the basis of the old “α-haloketone rule” used in steroid stereochemistry.
  • Kinetic coupling splits two identical carbonyls attached to a common atom into symmetric and antisymmetric combinations: anhydrides and imides show two C=O bands. For open-chain anhydrides the higher band is stronger; for cyclic anhydrides the lower one is stronger.

Hydrogen Bonding and the Dilution Test

O–H and N–H bands are broadened and shifted to lower wavenumber by H-bonding (the X–H bond is weakened). The dilution test separates the two kinds of H-bond:

Observation on dilution in CCl₄Interpretation
Broad band at about 3350 weakens; sharp band at about 3620 growsintermolecular H-bonding (breaks as molecules separate)
Band position and relative intensity unchangedintramolecular H-bonding (within one molecule, concentration-independent)

Classic pairs where the test decides:

  • o-Nitrophenol (intramolecular, unchanged on dilution) versus p-nitrophenol (intermolecular, changes). The same intramolecular H-bond explains why o-nitrophenol is steam-volatile.
  • cis-Cyclopentane-1,2-diol (intramolecular O–H···O possible) versus the trans diol (OH groups too far apart; only intermolecular).
graph TD
    A["Broad O-H band
about 3200-3550 cm⁻¹"] --> B{"Dilute progressively
in CCl₄"} B -->|"Band shifts to about 3620,
sharpens"| C["Intermolecular H-bond"] B -->|"Band unchanged"| D["Intramolecular H-bond
(chelate, 1,2-diol cis, o-substituted phenol)"] A --> E{"Band spans 2500-3300
with C=O near 1710?"} E -->|Yes| F["Carboxylic acid dimer"]

Alkenes and Aromatics: Substitution Patterns from C–H Bends

The out-of-plane (oop) =C–H bending bands below 1000 cm⁻¹ are strong and pattern-specific.

Alkene typeoop band(s) (cm⁻¹), approximate
Monosubstituted, RCH=CH₂about 990 and 910 (two bands)
1,1-Disubstituted, R₂C=CH₂about 890
trans-RCH=CHRabout 965–970
cis-RCH=CHRabout 675–730 (broad, variable)
Trisubstitutedabout 800–840
Benzene substitutionoop band(s) (cm⁻¹), approximate
Monosubstitutedabout 730–770 and 690–710 (two strong bands)
ortho-Disubstitutedabout 735–770 (one band)
meta-Disubstitutedabout 750–810 and 690–710 (plus about 860–900)
para-Disubstitutedabout 800–860 (one band)

Weak overtone and combination bands between 2000 and 1650 cm⁻¹ (“benzene fingers”) also follow the substitution pattern, but are rarely needed when NMR is available.

Nitrogen Compounds at a Glance

ClassDiagnostic bands (cm⁻¹)
Primary amine RNH₂two N–H stretches 3300–3500; N–H bend 1580–1650; broad N–H wag about 650–900
Secondary amine R₂NHone weak N–H stretch about 3300–3350
Tertiary amineno N–H; only C–N in the fingerprint
Primary amide RCONH₂two N–H stretches; amide I about 1650–1690; amide II (N–H bend) about 1600–1640
Secondary amide RCONHR′one N–H stretch; amide I about 1640–1680; amide II about 1510–1570
Ammonium saltsvery broad N–H⁺ absorption about 2200–3000
Nitrile2210–2260
Nitro1550 and 1350

A Systematic Way to Read a Spectrum

graph TD
    S["Molecular formula → degree of unsaturation"] --> A{"Strong band 1650-1850?"}
    A -->|Yes| B["Carbonyl: check 2720/2820 (aldehyde),
2500-3300 broad (acid), 1000-1300 (ester C-O),
N-H (amide), two C=O (anhydride)"] A -->|No| C{"Broad 3200-3550?"} C -->|Yes| D["Alcohol or phenol: check C-O 1000-1260"] C -->|No| E{"3300-3500 one or two bands?"} E -->|Yes| F["Amine (count bands)"] E -->|No| G["Check 2100-2260 (C≡N, C≡C),
1600/1500 (arene), 1550/1350 (NO₂),
C-H above or below 3000"]

Work in this order: first the presence or absence of C=O, then O–H/N–H, then C–H above or below 3000 cm⁻¹, then the 2000–2300 window, then aromatic pairs and oop bends. Do not try to assign every fingerprint band.

Memory Tricks

Don’t Confuse

ThisvsThat
≡C–H stretch, about 3300, sharp and strongN–H stretch, 3300–3500, broader; O–H broader still
Carboxylic acid O–H, 2500–3300, extremely broadAlcohol O–H, 3200–3550, broad but centred higher
Aldehyde C–H, two weak bands 2820/2720Alkane C–H, 2850–2960, strong
Ester C=O 1735–1750 with strong C–O 1000–1300Ketone C=O 1715 without strong C–O
Ring strain: smaller ring → higher C=OConjugation → lower C=O
Intermolecular H-bond: changes on dilutionIntramolecular H-bond: unchanged on dilution
Nitro: 1550 + 1350, both strongNitrile: single sharp band about 2250
Anhydride two C=O bands (kinetic coupling)Fermi doublet (fundamental mixing with an overtone)

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper. Band positions are typical textbook values.

Level 1: Foundation

  1. How many N–H stretching bands are expected for (a) aniline, (b) N-methylaniline, (c) N,N-dimethylaniline?
  2. Which carbonyl absorbs at higher wavenumber: an ester or an amide? Give the electronic reason in one line.
  3. A compound shows bands at 3080 and 2960 cm⁻¹. What two kinds of C–H does it contain?
Answers
  1. (a) two (NH₂, asymmetric and symmetric); (b) one; (c) none.
  2. The ester (1735–1750 against about 1650–1690). The amide nitrogen donates its lone pair into the C=O far more strongly than the ester oxygen, lowering the C=O bond order.
  3. sp² C–H (above 3000, alkene or arene) and sp³ C–H (below 3000, alkyl).

Level 2: Part B Style

Practice Q1. The C–H stretching band of chloroform appears at about 3020 cm⁻¹. Assuming the force constant is unchanged, the C–D band of CDCl₃ is expected near (treat the C–H oscillator as an isolated diatomic, \( m_C = 12 \), \( m_H = 1.008 \), \( m_D = 2.014 \)):

(a) 1510 cm⁻¹ (b) 2135 cm⁻¹ (c) 2220 cm⁻¹ (d) 2470 cm⁻¹

Answer: (c)

\( \mu(\text{C–H}) = 12 \times 1.008/13.008 = 0.930 \); \( \mu(\text{C–D}) = 12 \times 2.014/14.014 = 1.725 \). Ratio \( = \sqrt{0.930/1.725} = 0.734 \). \( 3020 \times 0.734 = 2217 \approx 2220 \) cm⁻¹. (b) uses \( 1/\sqrt{2} \) (= 0.707): that is the reduced-mass trap.

Practice Q2. Arrange the C=O stretching wavenumbers in decreasing order: (I) acetyl chloride, (II) N,N-dimethylacetamide, (III) ethyl acetate, (IV) acetone.

(a) I > III > IV > II (b) III > I > IV > II (c) I > IV > III > II (d) II > IV > III > I

Answer: (a)

Acid chloride about 1800 > ester about 1740 > ketone about 1715 > amide about 1650. Strong –I with little resonance (Cl) raises the band; strong +R (NMe₂) lowers it.

Practice Q3. Which compound is expected to show the highest C=O stretching wavenumber?

(a) cyclohexanone (b) cyclopentanone (c) cyclobutanone (d) cyclohex-2-en-1-one

Answer: (c)

Ring strain raises the C=O frequency: cyclobutanone about 1780 > cyclopentanone about 1745 > cyclohexanone about 1715. The conjugated enone (d) is lowest, about 1675–1685.

Practice Q4. A compound C₈H₈O shows strong IR bands at 3060, 2925 and 1686 cm⁻¹ and no absorption at 2720 cm⁻¹ or above 3100 cm⁻¹. The most likely structure is:

(a) phenylacetaldehyde (b) acetophenone (c) 4-methylbenzaldehyde (d) 2-phenyloxirane

Answer: (b)

DBE = 8 − 8/2 + 1 = 5 (ring + three C=C + C=O). The C=O at 1686 cm⁻¹ is a conjugated (aryl) ketone. Both aldehydes (a, c) would show the 2720/2820 Fermi doublet, and phenylacetaldehyde (non-conjugated CHO) would absorb near 1725. The epoxide (d) has no C=O.

Level 3: Part C Style

Practice Q5. The C=O stretch of a saturated ketone (taken as an isolated ¹²C=¹⁶O oscillator) appears at 1715 cm⁻¹. Use \( c = 2.998 \times 10^{10} \) cm s⁻¹, \( 1 \) u \( = 1.6605 \times 10^{-27} \) kg, \( m(^{16}\text{O}) = 15.995 \) u, \( m(^{13}\text{C}) = 13.003 \) u. Which pair is correct for the C=O force constant and the band of the ¹³C=O isotopologue?

(a) about 1190 N m⁻¹; about 1677 cm⁻¹ (b) about 1190 N m⁻¹; about 1650 cm⁻¹ (c) about 595 N m⁻¹; about 1677 cm⁻¹ (d) about 2380 N m⁻¹; about 1700 cm⁻¹

Answer: (a)

Step 1, reduced mass. \( \mu = 12 \times 15.995/27.995 = 6.856 \) u \( = 1.1385 \times 10^{-26} \) kg.

Step 2, force constant. \( k = (2\pi c \tilde{\nu})^2 \mu = (2\pi \times 2.998 \times 10^{10} \times 1715)^2 \times 1.1385 \times 10^{-26} \approx 1.19 \times 10^{3} \) N m⁻¹.

Step 3, isotope shift. \( \mu(^{13}\text{C}=\text{O}) = 13.003 \times 15.995/28.998 = 7.172 \) u. \( \tilde{\nu}' = 1715 \sqrt{6.856/7.172} = 1715 \times 0.9777 \approx 1677 \) cm⁻¹.

(c) and (d) are half and double the correct force constant; (b) over-estimates the isotope shift (it scales as \( \mu^{-1/2} \), only about 2 per cent here).

Practice Q6. Two isomeric compounds P and Q, C₆H₅NO₃, are both nitrophenols. In dilute CCl₄ solution, the O–H band of P stays at about 3200 cm⁻¹ and is broad at every concentration; the O–H band of Q moves from a broad band near 3330 cm⁻¹ (concentrated) to a sharp band near 3590 cm⁻¹ (dilute). Consider:

  1. P is o-nitrophenol.
  2. Q shows only intramolecular hydrogen bonding.
  3. P is expected to be more volatile (steam-distillable) than Q.
  4. Both compounds show strong bands near 1530 and 1350 cm⁻¹.

The correct statements are:

(a) 1 and 2 only (b) 1, 3 and 4 only (c) 2 and 4 only (d) 1, 2, 3 and 4

Answer: (b)
  1. Correct. A concentration-independent, low O–H band means an intramolecular H-bond: only the ortho isomer can chelate O–H···O–N.
  2. Wrong. Q’s band responds to dilution, so its H-bonds are intermolecular (Q is m- or p-nitrophenol).
  3. Correct. With its OH tied up internally, o-nitrophenol has weaker intermolecular forces and is steam-volatile.
  4. Correct. Both contain NO₂: asymmetric and symmetric stretches near 1530 and 1350 cm⁻¹ (aromatic nitro groups sit slightly below the aliphatic 1550).

Practice Q7. An unknown, C₄H₆O₂, shows a strong IR band at 1770 cm⁻¹, strong bands at 1170 and 1040 cm⁻¹, and C–H bands only between 2880 and 2990 cm⁻¹. There is no band at 1600–1680 cm⁻¹ and nothing above 3000 cm⁻¹. Which structure fits?

(a) methyl acrylate (b) vinyl acetate (c) γ-butyrolactone (d) but-2-enoic acid

Answer: (c)

DBE = 4 − 6/2 + 1 = 2: the C=O plus one more ring or π bond.

  • No C=C stretch (1600–1680) and no =C–H above 3000: the second unsaturation is a ring. This removes (a), (b) and (d), all of which contain C=C.
  • No broad O–H: not an acid (also removes d).
  • 1770 cm⁻¹ with strong C–O bands is a five-membered lactone (ester raised by ring strain from about 1740 to about 1770). Vinyl acetate is a good distractor because its C=O is also high (enol esters absorb near 1760), but it would show C=C near 1650 and =C–H above 3000.

Quick Revision Table

IdeaFact
Oscillator\( \tilde{\nu} = \frac{1}{2\pi c}\sqrt{k/\mu} \); stronger bond higher, heavier atoms lower
IsotopeC–D ≈ 0.734 × C–H; O–D ≈ 0.728 × O–H
C–Hsp³ 2850–2960; sp² 3000–3100; sp about 3300; CHO 2820/2720
O–Hfree 3600–3650 sharp; H-bonded 3200–3550 broad; acid 2500–3300 very broad
N–HNH₂ two bands, NH one, N none
Triple bondsC≡N 2210–2260; C≡C 2100–2260 (weak or absent if symmetric)
C=O orderCOCl 1800 > anhydride 1820/1760 > ester 1740 > CHO 1725 > ketone 1715 > acid 1710 > amide 1650–1690
Conjugationlowers C=O by about 20–40 cm⁻¹
Ring strain6 → 5 → 4 ring: 1715 → 1745 → 1780 (ketones); lactones 1740 → 1770 → 1840
H-bondlowers X–H and C=O; dilution test separates inter (changes) and intra (unchanged)
Nitro1550 and 1350
Alkene oopvinyl 990 + 910; 1,1- 890; trans 965; cis about 700
Benzene oopmono 750 + 700; ortho 750; meta 780 + 700 (+ 880); para 830

Key Takeaways

What’s Next