¹H NMR Spectroscopy: Chemical Shift, Coupling and Spin Systems
CSIR NET organic spectroscopy: ¹H chemical shifts, anisotropy, n+1 coupling, Karplus, topicity, spin systems, exchange, coalescence and NOE.
- 19 min
On this page · 16 sections
- Prerequisites
- The Hook: Three Peaks That Changed Chemistry
- The Chemical Shift
- Integration
- Spin–Spin Coupling
- Topicity: When “Identical-Looking” Protons Differ
- Exchange Phenomena
- Tools That Simplify Spectra
- Reading a ¹H Spectrum: A Routine
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Basic Principles of Magnetic Resonance: nuclear spin, Larmor frequency, the resonance condition and relaxation. This page assumes them.
- Stereogenicity, Chirality and Configuration: symmetry elements, needed to decide whether two protons are equivalent.
- Cyclic Systems: Configuration and Conformation: axial and equatorial positions, used with the Karplus relation.
The Hook: Three Peaks That Changed Chemistry
The Chemical Shift
Definition
The resonance frequency of a proton is \( \nu = \gamma B_0(1 - \sigma)/2\pi \), where σ is the shielding constant. Because absolute frequencies depend on the magnet, the position is reported relative to a reference:
$$\delta\ (\text{ppm}) = \frac{\nu_{\text{sample}} - \nu_{\text{TMS}}}{\nu_{\text{spectrometer}}} \times 10^{6}$$Tetramethylsilane, Si(CH₃)₄ (TMS), is the reference: its 12 equivalent protons are strongly shielded (silicon is electropositive), it is inert, volatile and gives one sharp signal at δ 0. In D₂O, a water-soluble silyl reference (such as DSS) is used instead.
Shielded (upfield, low δ) protons feel a smaller net field and resonate at lower frequency; deshielded (downfield, high δ) protons resonate at higher frequency.
What moves a proton downfield
1. Electronegativity (inductive effect). Electron withdrawal reduces the local diamagnetic shielding.
| Compound | δ (CH₃), approximate |
|---|---|
| CH₄ | 0.23 |
| CH₃I | 2.16 |
| CH₃Br | 2.68 |
| CH₃Cl | 3.05 |
| CH₃OH | 3.4 |
| CH₃F | 4.26 |
The effect is additive and falls off with distance: CH₃Cl 3.05, CH₂Cl₂ 5.30, CHCl₃ 7.27; in 1-chloropropane the shifts drop from about 3.5 (C1) to about 1.8 (C2) to about 1.0 (C3).
2. Magnetic anisotropy of π systems. Circulating π electrons create local fields that shield some regions of space and deshield others.
| Group | Effect on attached H | Typical δ |
|---|---|---|
| Benzene ring | ring current deshields protons in the plane | 6.5–8.5 |
| C=C | deshields vinylic H (in the plane) | 4.5–6.5 |
| C=O (aldehyde) | anisotropy plus electronegativity | 9–10 |
| C≡C | cylindrical π cloud shields H on the axis | about 1.8–3.1 |
The alkyne is the classic exception: acetylenic H (about δ 2–3) is upfield of vinylic H (about δ 5), even though the sp carbon is more electronegative. The axis of the triple bond lies in the shielding cone. The aromatic ring current is also the magnetic criterion of aromaticity; see Aromaticity Criteria.
3. Hydrogen bonding and exchange. O–H and N–H shifts depend on concentration, solvent and temperature, because H-bonding deshields. Alcohol OH can appear anywhere from about δ 0.5 to 5; carboxylic acid OH (strongly H-bonded dimers) at δ 10–13; an intramolecularly H-bonded enol or phenol OH (e.g., in acetylacetone’s enol) can reach δ 12–16.
Shift ranges to know cold
| Proton type | δ (ppm), approximate |
|---|---|
| Cyclopropane CH₂ | 0.2–0.5 |
| Alkyl CH₃ / CH₂ / CH | 0.9 / 1.3 / 1.5 |
| Allylic, benzylic, α to C=O (CH₃C=O) | 1.7–2.6 (CH₃CO about 2.1) |
| Amine N–CH | 2.2–2.9 |
| Alkyne ≡C–H | 1.8–3.1 |
| CH₂–Hal, O–CH (ethers, alcohols) | 3.3–4.0 |
| Ester O–CH (–CO–O–CH) | 3.7–4.3 |
| Vinylic =C–H | 4.5–6.5 |
| Aromatic Ar–H | 6.5–8.5 |
| Amide N–H | 5–9 |
| Aldehyde CHO | 9–10 |
| Carboxylic acid CO₂H | 10–13 |
Estimating CH₂ shifts: Shoolery’s rule
For X–CH₂–Y:
$$\delta = 0.23 + \sigma_X + \sigma_Y$$| Group | σ (Shoolery constant), approximate |
|---|---|
| –CH₃ | 0.47 |
| –C=C | 1.32 |
| –C(=O)R | 1.70 |
| –Ph | 1.85 |
| –I | 1.82 |
| –Br | 2.33 |
| –OR | 2.36 |
| –Cl | 2.53 |
| –OH | 2.56 |
Check: CH₂Cl₂, \( 0.23 + 2 \times 2.53 = 5.29 \) (observed 5.30). PhCH₂Cl, \( 0.23 + 1.85 + 2.53 = 4.61 \) (observed about 4.5). Use it to rank or to choose between options, not to predict to 0.01 ppm.
Aromatic substituent effects
Electron donors (OMe, NH₂, OH) shield ortho and para protons (push them towards δ 6.5–6.9); electron acceptors (NO₂, C=O, CN) deshield ortho protons most strongly (nitrobenzene ortho H about δ 8.2). A para-disubstituted ring with two different groups gives a characteristic pair of two-proton “doublets” (strictly an AA′BB′ pattern).
Integration
The area under each signal is proportional to the number of protons giving it. Integrals give ratios, not absolute numbers: 2 : 3 can be 2H : 3H or 4H : 6H. Use the molecular formula to scale.
Spin–Spin Coupling
The n + 1 rule
A proton with \( n \) equivalent neighbouring protons (usually on adjacent carbons, three bonds away) is split into \( n + 1 \) lines with intensities from Pascal’s triangle. The separation between lines is the coupling constant \( J \) (Hz).
| Neighbours \( n \) | Pattern | Intensities |
|---|---|---|
| 0 | singlet (s) | 1 |
| 1 | doublet (d) | 1 : 1 |
| 2 | triplet (t) | 1 : 2 : 1 |
| 3 | quartet (q) | 1 : 3 : 3 : 1 |
| 4 | quintet | 1 : 4 : 6 : 4 : 1 |
| 5 | sextet | 1 : 5 : 10 : 10 : 5 : 1 |
| 6 | septet | 1 : 6 : 15 : 20 : 15 : 6 : 1 |
Two different sets of neighbours (\( n \) with \( J_1 \), \( m \) with \( J_2 \)) give \( (n + 1)(m + 1) \) lines: a doublet of triplets, a doublet of doublets (dd), and so on. If \( J_1 \approx J_2 \), lines overlap and the pattern looks like \( n + m + 1 \) lines (the CH₂ of a propyl group, coupled to CH₃ and CH₂ with similar J, appears as a sextet).
First-order conditions and spin-system notation
The n + 1 rule holds when \( \Delta\nu/J \) is large (a rule of thumb: more than about 10). When \( \Delta\nu \) approaches \( J \), the spectrum becomes second order: extra lines appear, intensities distort and the inner lines of coupled multiplets grow at the expense of the outer ones (the roof effect, pointing towards the coupling partner).
| Notation | Meaning | Example |
|---|---|---|
| A₂, A₃ | equivalent nuclei, no splitting among them | CH₃ singlet |
| AX | two nuclei, \( \Delta\nu \gg J \) | two widely separated doublets |
| AB | two nuclei, \( \Delta\nu \approx J \) | “roofed” pair of doublets |
| AMX | three nuclei, all far apart | vinyl group: three dd |
| A₂X₂, A₃X₂ | first-order groups | ethyl: A₃X₂ (triplet + quartet) |
| AA′XX′, AA′BB′ | chemically but not magnetically equivalent pairs | para-disubstituted benzene, 1,2-disubstituted ethylene units |
Letters far apart in the alphabet mean large shift difference; primes mean chemically equivalent but magnetically non-equivalent nuclei.
Chemical versus magnetic equivalence
- Chemically equivalent (isochronous): interchangeable by a symmetry operation or rapid process; same δ.
- Magnetically equivalent: chemically equivalent and each couples identically to every other nucleus in the molecule.
In 1,1-difluoroethylene the two H are chemically equivalent but each couples differently to the cis and trans F: magnetically non-equivalent (AA′XX′). In para-substituted benzenes, H2 and H6 are chemically equivalent but H2 couples to H3 with an ortho J and to H5 with a para J, so the system is AA′BB′ or AA′XX′, not a simple pair of doublets, though at high field it often looks like one.
Typical coupling constants
| Type | Bonds | \( J \) (Hz), approximate |
|---|---|---|
| Geminal H–C–H, sp³ | 2 | 12–15 (often invisible when the two H are equivalent) |
| Geminal =CH₂ | 2 | 0–3 |
| Vicinal H–C–C–H, free rotation | 3 | 6–8 (about 7) |
| Alkene cis | 3 | 6–12 |
| Alkene trans | 3 | 12–18 |
| Cyclohexane axial–axial | 3 | 8–13 |
| Cyclohexane axial–equatorial, equatorial–equatorial | 3 | 2–5 |
| Aromatic ortho / meta / para | 3 / 4 / 5 | 6–10 / 1–3 / 0–1 |
| Aldehyde CHO–CH (vicinal) | 3 | 1–3 |
| Allylic H–C=C–C–H | 4 | 0–3 |
| W (long-range, rigid systems) | 4 | 1–3 |
| H–F geminal / vicinal | 2 / 3 | about 45–50 / about 5–25 |
The Karplus relation
The vicinal coupling \( ^3J \) depends on the H–C–C–H dihedral angle φ:
$$^3J(\phi) \approx A\cos^2\phi + B\cos\phi + C$$with empirical constants. \( ^3J \) is largest near φ = 180° (antiperiplanar), slightly smaller near 0°, and smallest near 90°.
graph LR
A["φ = 0°
eclipsed
J about 8-10 Hz"] --> B["φ = 60°
gauche
J about 2-5 Hz"]
B --> C["φ = 90°
J near 0"]
C --> D["φ = 180°
anti
J about 10-13 Hz"]This is why a cyclohexane proton that is axial (it has two axial neighbours at 180°) shows large couplings, while an equatorial proton (all neighbours at about 60°) shows only small ones. In a locked ring (4-tert-butylcyclohexanol, for example) the carbinol H of the trans isomer is axial (broad multiplet, large \( J_{aa} \)), while that of the cis isomer is equatorial (narrow multiplet). The same logic assigns cis/trans ring fusions and anomeric configurations in sugars.
Topicity: When “Identical-Looking” Protons Differ
Replace each proton in turn by a test group Z and compare the products.
| Products of substitution test | Relationship | NMR consequence |
|---|---|---|
| Identical | homotopic | always equivalent |
| Enantiomers | enantiotopic | equivalent in an achiral environment; can differ in a chiral solvent or with a chiral shift reagent |
| Diastereomers | diastereotopic | in principle non-equivalent: different δ, may couple to each other |
Examples:
- The CH₂ protons of ethanol are enantiotopic (one signal).
- The CH₂ protons next to a stereocentre (e.g., in 2-butanol’s C3, or the CH₂ of a benzyl group attached to a chiral centre) are diastereotopic: they can appear as an AB pattern with a geminal coupling.
- The two methyls of an isopropyl group attached to a stereocentre are diastereotopic and can give two doublets.
- The two vinylic H of a terminal =CH₂ in a monosubstituted alkene are diastereotopic (one is cis, one trans to the substituent).
Exchange Phenomena
OH and NH: D₂O shake
Labile protons (OH, NH, CO₂H) exchange with D₂O; their signal disappears after shaking the sample with a drop of D₂O (and an HOD signal grows near δ 4.7–4.8). In CDCl₃, rapid intermolecular exchange (catalysed by traces of acid) usually decouples the OH from neighbouring CH protons: ethanol’s OH appears as a singlet and the CH₂ as a simple quartet. In very pure samples or in DMSO-d₆ (which H-bonds and slows exchange) the OH coupling becomes visible: a triplet for a primary alcohol, a doublet for a secondary.
Dynamic NMR and coalescence
If two sites exchange (by bond rotation, ring flip or proton transfer) at rate \( k \):
- slow exchange (\( k \ll \Delta\nu \)): two separate signals;
- fast exchange (\( k \gg \Delta\nu \)): one averaged signal;
- at the coalescence temperature \( T_c \), for two equally populated uncoupled singlets separated by \( \Delta\nu \) (Hz):
The second equation is the Eyring equation evaluated with \( k_c \). Classic examples: the two N-methyl signals of DMF or N,N-dimethylacetamide (restricted C–N rotation from amide resonance) coalesce on heating; the axial and equatorial protons of cyclohexane-d₁₁ separate on cooling well below room temperature. Because \( \Delta\nu \) in Hz grows with the field, coalescence occurs at a higher temperature on a higher-field instrument.
Tools That Simplify Spectra
| Technique | What it does | Typical use |
|---|---|---|
| Higher field | increases \( \Delta\nu/J \), making spectra first order | resolving overlapping multiplets |
| Spin decoupling (homonuclear) | irradiating one proton removes its splitting from partners | proving which protons are coupled |
| Lanthanide shift reagents, e.g., Eu(fod)₃ | bind to Lewis-basic sites (OH, C=O, NH₂); paramagnetic shifts spread signals, largest for nearby protons | simplifying crowded spectra; Eu shifts downfield, Pr upfield |
| Chiral shift reagents, e.g., Eu(hfc)₃ | form diastereomeric complexes with enantiomers | measuring enantiomeric excess |
| NOE difference / NOESY | through-space enhancement between protons less than about 5 Å apart | relative stereochemistry, E/Z assignment, conformation |
Reading a ¹H Spectrum: A Routine
graph TD
A["Formula → DBE"] --> B["Number of signals → sets of equivalent H"]
B --> C["Integration → H count per set"]
C --> D["δ of each set → environment
(alkyl, O-CH, vinyl, aryl, CHO, CO₂H)"]
D --> E["Multiplicity and J → neighbours
(n+1, cis/trans, ax/eq, o/m/p)"]
E --> F["Assemble fragments: ethyl (t + q),
isopropyl (d 6H + septet), tert-butyl (s 9H)"]
F --> G["Check with IR, ¹³C, MS"]| Fragment | Signature |
|---|---|
| Ethyl CH₃CH₂–X | 3H triplet + 2H quartet, \( J \approx 7 \) Hz |
| Isopropyl (CH₃)₂CH–X | 6H doublet + 1H septet |
| tert-Butyl | 9H singlet near δ 0.9–1.3 |
| Methyl ketone CH₃CO– | 3H singlet near δ 2.1 |
| Methyl ester –CO₂CH₃ | 3H singlet near δ 3.7 |
| Methoxy on arene ArOCH₃ | 3H singlet near δ 3.8 |
| Monosubstituted benzene | 5H in δ 7.1–7.5 |
| para-Disubstituted benzene | two 2H “doublets”, J about 8–9 Hz |
| Vinyl group –CH=CH₂ | three 1H dd (AMX) |
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| δ in ppm, field-independent | \( \Delta\nu \) in Hz, scales with field | |
| \( J \) in Hz, field-independent | apparent line separation in ppm, shrinks with field | |
| Chemical equivalence: same δ | Magnetic equivalence: same δ and identical couplings to every other nucleus | |
| Enantiotopic: equivalent unless the medium is chiral | Diastereotopic: non-equivalent in any medium | |
| J coupling: through bonds, splits lines | NOE: through space (\( r^{-6} \)), changes intensities | |
| Alkyne H about δ 2–3 (shielded by the cylinder) | Vinyl H about δ 4.5–6.5 | |
| Exchange decoupling (OH singlet in CDCl₃) | Absence of neighbours |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper. Shift values are typical, rounded figures.
Level 1: Foundation
- How many ¹H NMR signals does each give: (a) 1,2-dichloroethane, (b) 2-chloropropane, (c) methyl acetate?
- Two doublets of a CH=CH unit are separated by 16 Hz within each doublet. Is the double bond cis or trans?
- At 500 MHz, two singlets are 0.20 ppm apart. What is the separation in Hz?
Answers
- (a) one (all four H equivalent); (b) two (6H doublet, 1H septet); (c) two (CH₃CO about δ 2.0 and OCH₃ about δ 3.7, both singlets).
- Trans (\( ^3J \) 12–18 Hz).
- \( 0.20 \times 500 = 100 \) Hz.
Level 2: Part B Style
Practice Q1. Using Shoolery’s rule with σ(Ph) = 1.85 and σ(Br) = 2.33, the predicted δ for the CH₂ protons of benzyl bromide is:
(a) 2.56 (b) 3.41 (c) 4.41 (d) 4.64
Answer: (c)
\( \delta = 0.23 + 1.85 + 2.33 = 4.41 \). (d) uses σ(Cl) for Br.
Practice Q2. In the first-order ¹H NMR spectrum of 1-nitropropane (CH₃CH₂CH₂NO₂), assuming equal vicinal couplings, the central CH₂ appears as a:
(a) triplet (b) quartet (c) quintet (d) sextet
Answer: (d)
The central CH₂ has 3 + 2 = 5 neighbours. With equal J, \( n + 1 = 6 \) lines: a sextet. With unequal J it would be a triplet of quartets (12 lines).
Practice Q3. Which pair of protons is diastereotopic?
(a) the CH₂ protons of ethanol (b) the CH₂ protons of dichloromethane (c) the CH₂ protons of (R)-2-bromobutane at C3 (d) the two methyl groups of propane
Answer: (c)
Replacing either C3 proton of (R)-2-bromobutane by Z gives a second stereocentre, and the two products are diastereomers. The ethanol CH₂ protons are enantiotopic; CH₂Cl₂ protons are homotopic; the propane methyls are equivalent by symmetry.
Practice Q4. A compound C₄H₈O₂ shows: δ 4.12 (q, 2H, J = 7.1 Hz), 2.04 (s, 3H), 1.26 (t, 3H, J = 7.1 Hz). It is:
(a) methyl propanoate (b) ethyl acetate (c) butanoic acid (d) 1,4-dioxane
Answer: (b)
An ethyl group (q + t, same J) whose CH₂ is at δ 4.1 must be on oxygen (O–CH₂ of an ester), and a 3H singlet at δ 2.0 is CH₃C=O. Methyl propanoate would show OCH₃ singlet near δ 3.7 and the CH₂ quartet near δ 2.3. Butanoic acid has a CO₂H near δ 11–12; dioxane gives a single 8H singlet.
Level 3: Part C Style
Practice Q5. In an amide (illustrative data), the two N-methyl singlets are separated by 0.15 ppm on a 400 MHz spectrometer and coalesce at 393 K. Which values are correct (R = 8.314 J K⁻¹ mol⁻¹)?
(a) \( k_c \approx 133 \) s⁻¹; \( \Delta G^{\ddagger} \approx 81 \) kJ mol⁻¹ (b) \( k_c \approx 60 \) s⁻¹; \( \Delta G^{\ddagger} \approx 81 \) kJ mol⁻¹ (c) \( k_c \approx 133 \) s⁻¹; \( \Delta G^{\ddagger} \approx 33 \) kJ mol⁻¹ (d) \( k_c \approx 0.33 \) s⁻¹; \( \Delta G^{\ddagger} \approx 100 \) kJ mol⁻¹
Answer: (a)
Step 1. \( \Delta\nu = 0.15 \times 400 = 60 \) Hz.
Step 2. \( k_c = \pi \times 60/\sqrt{2} = 133 \) s⁻¹.
Step 3. \( \Delta G^{\ddagger} = 8.314 \times 393 \times [22.96 + \ln(393/60)] = 3267 \times (22.96 + 1.879) = 3267 \times 24.84 \approx 8.12 \times 10^4 \) J mol⁻¹ \( \approx 81 \) kJ mol⁻¹.
(b) uses \( \Delta\nu \) as the rate; (c) drops the 22.96 term. On a 600 MHz instrument \( \Delta\nu \) would be 90 Hz and coalescence would occur at a higher temperature, but \( \Delta G^{\ddagger} \) would be the same.
Practice Q6. The cis and trans isomers of 4-tert-butylcyclohexanol were examined. Isomer A shows the CH–OH proton at δ 3.5 as a triplet of triplets with \( J = 11 \) and 4 Hz; isomer B shows it at δ 4.0 as a narrow multiplet (width about 8 Hz). Consider:
- In A the CH–OH proton is axial, so A is the trans isomer.
- In B the OH group is axial.
- The 11 Hz coupling in A arises from two axial–axial (φ ≈ 180°) interactions.
- The equatorial proton of B is downfield of the axial proton of A.
The correct statements are:
(a) 1 and 3 only (b) 1, 2 and 3 only (c) 1, 2, 3 and 4 (d) 2 and 4 only
Answer: (c)
The tert-butyl group locks itself equatorial.
- Correct. Large \( J \) (11 Hz, twice) means two antiperiplanar neighbours: the carbinol H is axial, OH equatorial, which is trans to the equatorial tert-butyl.
- Correct. In B the carbinol H has only small couplings (equatorial H), so OH is axial (the cis isomer).
- Correct. Karplus: φ ≈ 180° gives the largest \( ^3J \).
- Correct. Equatorial protons on cyclohexane rings generally resonate downfield of comparable axial protons (δ 4.0 against 3.5 here), a consequence of C–C bond anisotropy.
Practice Q7. A compound C₉H₁₀O₂ shows IR 1740 cm⁻¹ and ¹H NMR: δ 7.30 (m, 5H), 5.10 (s, 2H), 2.08 (s, 3H). Which structure fits, and why?
(a) methyl phenylacetate (b) benzyl acetate (c) ethyl benzoate (d) 4-methylphenyl acetate
Answer: (b)
DBE = 9 − 10/2 + 1 = 5 (benzene ring + C=O). Monosubstituted benzene (5H, δ 7.3). A 2H singlet at δ 5.1 is a CH₂ flanked by Ph and O–C(=O) (Shoolery: \( 0.23 + 1.85 + 3.13 \approx 5.2 \) with σ(OCOR) about 3.13). A 3H singlet at δ 2.1 is CH₃C=O. Methyl phenylacetate would give OCH₃ at about δ 3.7 and CH₂ at about δ 3.6; ethyl benzoate shows q + t and aromatic H near δ 8.0 (ortho to C=O); 4-methylphenyl acetate would show a para-disubstituted AA′BB′ pattern (4H) and two 3H singlets, with no CH₂. The C=O at 1740 cm⁻¹ fits a saturated ester.
Quick Revision Table
| Idea | Fact |
|---|---|
| δ definition | \( (\nu - \nu_{TMS})/\nu_0 \times 10^6 \); TMS = 0 |
| ppm to Hz | multiply by spectrometer MHz |
| Electronegativity | CH₄ 0.23 < CH₃I 2.16 < CH₃Br 2.68 < CH₃Cl 3.05 < CH₃OH 3.4 < CH₃F 4.26 |
| Anisotropy | aryl 6.5–8.5, vinyl 4.5–6.5, CHO 9–10, alkyne 2–3 (shielded) |
| Exchangeable | ROH 0.5–5; CO₂H 10–13; disappear with D₂O |
| Shoolery | \( \delta = 0.23 + \sum\sigma \) |
| n + 1 | Pascal intensities; two sets: \( (n + 1)(m + 1) \) |
| J values | vicinal 7; trans 12–18; cis 6–12; ax–ax 8–13; ax–eq 2–5; ortho 6–10; meta 1–3 |
| Karplus | J max at 180°, near 0 at 90° |
| Topicity | homotopic = equivalent; enantiotopic = equivalent in achiral media; diastereotopic = different |
| Coalescence | \( k_c = \pi\Delta\nu/\sqrt{2} \); \( \Delta G^{\ddagger} = RT_c[22.96 + \ln(T_c/\Delta\nu)] \) |
| NOE | through space, \( r^{-6} \), within about 5 Å |
Key Takeaways
What’s Next
- ¹³C NMR Spectroscopy, DEPT and 2D Correlation: the carbon skeleton and the 2D experiments that link protons to carbons.
- The spin physics behind all of this: Basic Principles of Magnetic Resonance.
- Heteronuclear coupling to ³¹P, ¹⁹F and metals: NMR Spectroscopy of Inorganic Compounds.
- Back to the chapter overview.