Skip to content

Macrocyclic Hosts and Host–Guest Complexes

CSIR NET supramolecular chemistry: crown ethers, cryptands, spherands, ionophores, calixarenes, cyclodextrins, cucurbiturils, anion receptors and clathrates.

  • 20 min read
  • Updated
On this page · 20 sections
  1. Prerequisites
  2. The Hook: Purple Benzene
  3. A Map of Synthetic Hosts
  4. Crown Ethers (Coronands)
  5. Cryptands and Cryptates
  6. Spherands and Cram’s Preorganisation
  7. Natural Ionophores
  8. Calixarenes
  9. Cyclodextrins
  10. Cucurbiturils
  11. Anion Recognition
  12. Clathrates and Lattice Inclusion
  13. Comparison of Host Families
  14. Memory Tricks
  15. Don’t Confuse
  16. Common Mistakes
  17. Practice
  18. Quick Revision Table
  19. Key Takeaways
  20. What’s Next

Prerequisites

The Hook: Purple Benzene

How CSIR NET asks it. Part B: which crown or cryptand suits Li⁺, Na⁺ or K⁺; the number of glucose units in β-cyclodextrin; which ionophore is K⁺-selective; why a crown ether speeds up an S_N2 reaction with KF. Part C: selectivity and \( \Delta\Delta G^\circ \) from log K data; extraction or competition calculations; explaining binding trends across solvents; identifying a host from its formula or symmetry.


A Map of Synthetic Hosts

graph TD
    A[Synthetic hosts] --> B[Cation hosts]
    A --> C[Neutral-molecule hosts]
    A --> D[Anion hosts]
    B --> B1[Podands: open chain]
    B --> B2[Coronands: crown ethers, aza and thia crowns]
    B --> B3[Cryptands: bicyclic]
    B --> B4[Spherands: rigid, preorganised]
    C --> C1[Cyclodextrins]
    C --> C2[Calixarenes, cavitands, carcerands]
    C --> C3[Cucurbiturils]
    C --> C4[Cyclophanes]
    D --> D1[Protonated polyammonium macrocycles, katapinands]
    D --> D2[Neutral H-bond donors: amides, ureas, pyrroles]
    D --> D3[Lewis-acidic hosts]

Many hosts are ditopic: calixarenes and cucurbiturils bind cations at their oxygen-lined rims and organic guests in their cavities.

Crown Ethers (Coronands)

Structure and names

Crown ethers are macrocyclic oligomers of the –CH₂CH₂O– unit. In Pedersen’s trivial names, x-crown-y means a ring of x atoms, y of them oxygen; ring substituents are prefixed.

CrownFormulaRing atomsO atoms
12-crown-4C₈H₁₆O₄124
15-crown-5C₁₀H₂₀O₅155
18-crown-6C₁₂H₂₄O₆186
Dibenzo-18-crown-6C₂₀H₂₄O₆186
21-crown-7C₁₄H₂₈O₇217

The IUPAC name of 18-crown-6 is 1,4,7,10,13,16-hexaoxacyclooctadecane. In its K⁺ complex the ring adopts a nearly \( D_{3d} \) crown conformation with all six oxygens pointing inward, alternately slightly above and below the mean plane, and the cation in the centre. The free ligand is less symmetric: some CH₂ groups turn inward to fill the empty cavity, so the ring must reorganise on binding.

Synthesis and the template effect. Crowns are made by Williamson ether synthesis (an oligoethylene glycol plus a ditosylate or dichloride, with base). The cation of the base matters: with K⁺ present, 18-crown-6 forms in good yield because K⁺ organises the open-chain intermediate around itself, bringing its two reactive ends together. This template effect is kinetic (it stabilises the transition state for ring closure). A cation too small or too large for the target ring gives poorer yields and more polymer.

Size match: cavity versus cation

CrownCavity diameter / Å (approx.)Best-fitting cationCation diameter / Å (Pauling, approx.)
12-crown-41.2–1.5Li⁺1.20
15-crown-51.7–2.2Na⁺1.90
18-crown-62.6–3.2K⁺2.66
21-crown-73.4–4.3Cs⁺3.38

Cavity and ionic sizes differ between sources, so treat the numbers as a guide to the pairing, which is the standard textbook pairing.

What happens with a mismatch:

  • Cation too large for the cavity (K⁺ with 15-crown-5, Cs⁺ with 18-crown-6): it sits above the ring, and often a second ring caps it to give a 2 : 1 sandwich complex [M(crown)₂]⁺.
  • Cation too small (Na⁺ with 18-crown-6): the flexible ring wraps around it, twisting so that only some oxygens bind well, or a water molecule completes the coordination.

Factors that tune crown-ether binding

ChangeEffect on bindingReason
More polar, better-solvating solvent (water vs MeOH)weakersolvent competes for the cation
Benzo fusion (dibenzo-18-crown-6)weaker than 18-crown-6aryl ether O is less basic; ring is more rigid in the wrong way
Cyclohexano fusionsimilar to parentalkyl ether O, still basic
O replaced by NH or NR (aza crowns)weaker for K⁺, stronger for transition metals and Ag⁺N is softer; HSAB
O replaced by S (thia crowns)binds soft metals (Ag⁺, Hg²⁺, Cu⁺, Pd²⁺)S is soft
Side arm with donor (lariat ether)stronger, 3-D bindingextra donor caps the cation
Larger counter-ion that is weakly pairedapparently stronger extractionion-pair effects in low-polarity solvents

Ammonium ions. 18-crown-6 also binds NH₄⁺ and primary alkylammonium ions RNH₃⁺: the three N–H groups hydrogen-bond to alternate oxygens of the ring (a tripod of N–H···O bonds) while the other three oxygens add ion–dipole contacts. Secondary and tertiary ammonium ions bind more weakly (fewer N–H donors). Cram made chiral crowns from 1,1′-binaphthyl units that bind one enantiomer of a chiral ammonium salt (for example, an amino acid ester salt) better than the other, an early synthetic example of chiral recognition (see Enantio-discrimination).

Uses of crown ethers

  1. Phase-transfer catalysis and “naked” anions. KF is insoluble in acetonitrile or benzene. With 18-crown-6 it dissolves as [K(18-crown-6)]⁺F⁻; the fluoride is weakly solvated and weakly ion-paired, so it is a much stronger nucleophile and base. Halide exchange, ester hydrolysis by KOH, and oxidation by KMnO₄ (“purple benzene”) all run faster in non-polar solvents.
  2. Changing reactivity of organometallics and bases: complexing the counter-cation separates ion pairs (for example, potassium alkoxides and enolates), increasing anion reactivity.
  3. Alkalides and electrides (with cryptands, below).
  4. Ion-selective electrodes and separation: crown-containing membranes and extractants.

Cryptands and Cryptates

Lehn’s cryptands are bicyclic: two bridgehead nitrogens connected by three polyether chains. The cation is enclosed in a three-dimensional crypt; the complex is a cryptate. Notation [a.b.c] gives the number of oxygens in each bridge.

CryptandFormulaBest-fitting cation
[2.1.1]C₁₄H₂₈N₂O₄Li⁺
[2.2.1]C₁₆H₃₂N₂O₅Na⁺
[2.2.2]C₁₈H₃₆N₂O₆K⁺ (also Sr²⁺, Ba²⁺)

[2.2.2] is 4,7,13,16,21,24-hexaoxa-1,10-diazabicyclo[8.8.8]hexacosane: six O and two N donors, eight-coordinate cation.

Cryptate effect. For a matched cation, cryptate formation constants exceed those of the corresponding crown complexes by several orders of magnitude, because the cryptand surrounds the cation completely, removes all its solvent, and is preorganised in three dimensions. Cryptands also show peak selectivity: binding falls steeply for cations smaller or larger than the cavity, because the rigid bicycle cannot adjust much. Flexible crowns show flatter selectivity profiles.

Kinetics. Release of the cation from a cryptate is slow (it must squeeze out through a face of the crypt). Cryptate exchange can often be seen as separate free and bound NMR signals (slow exchange).

In/out isomerism. Each bridgehead nitrogen can point its lone pair into the cavity (in) or outward (out), giving in,in, in,out and out,out forms. The cation binds the in,in form. Protonation inside the cavity of small bicyclic amines was first seen in Park and Simmons’s bicyclic diamines.

Alkalides and electrides

[2.2.2] binds Na⁺ so strongly that it can pull Na⁺ out of sodium metal. Dye crystallised sodide, [Na(2.2.2)]⁺Na⁻: the second sodium is an alkali-metal anion (3s²). Similarly, salts with an electron trapped in a lattice cavity as the anion, such as [Cs(18-crown-6)₂]⁺e⁻, are electrides. Both depend on complexing the cation so completely that it cannot take back the electron.

Spherands and Cram’s Preorganisation

Cram’s spherands are macrocycles of linked anisyl (methoxyphenyl) units, with the methoxy oxygens forced into a fixed octahedral array pointing into a cavity sized for Li⁺ or Na⁺. Because the host cannot be solvated inside its cavity and does not need to reorganise, it binds Li⁺ and Na⁺ extremely strongly, and the complexes are kinetically very inert. Comparing the series podand → coronand → cryptand → spherand with matched donors gave Cram his principle of preorganisation. Partial spherands (“hemispherands”) lie between cryptands and spherands.

Cram extended rigid hosts to cavitands (bowl-shaped, from resorcinarenes), carcerands (two cavitands joined covalently so that a guest is permanently imprisoned) and hemicarcerands (guest exchange possible at high temperature). Highly reactive species have been generated and studied inside hemicarcerands, protected by the “inner phase” of the host.

Natural Ionophores

Microorganisms make macrocycles that move cations across lipid membranes.

IonophoreTypeSelective forNotes
Valinomycincyclic depsipeptide, 12 residues: (D-Val–L-Lac–L-Val–D-Hiv)₃K⁺ over Na⁺, stronglyK⁺ bound by six ester C=O oxygens in an octahedral array (the amide C=O groups are hydrogen-bonded to the backbone N–H); lipophilic exterior; carrier
Nonactinmacrotetrolide (cyclic polyester)K⁺ (also NH₄⁺)eight O donors; carrier
Monensinopen-chain polyether carboxylic acidNa⁺carboxylate forms a neutral complex; cyclises by head-to-tail H-bond (a “pseudo-cyclic” podand)
Gramicidin Alinear peptidemonovalent cations, low selectivityforms a channel (helical dimer), not a carrier
Enterobactintris-catecholate siderophoreFe³⁺extremely high affinity; hard O donors for a hard ion

Carrier ionophores bind the ion, diffuse across the membrane, and release it on the other side; channel formers make a pore. Either way they collapse ion gradients, which is why many ionophores are antibiotics. Valinomycin’s K⁺/Na⁺ selectivity has the same origin as 18-crown-6’s: its cavity is preorganised for K⁺, and dehydrating Na⁺ costs more than the oversized cavity gives back. (Biological potassium channels select K⁺ by a related principle, with backbone carbonyls replacing water.) For metal–protein binding in general, see Metal Complexes in Medicine.

Calixarenes

Calix[n]arenes are cyclic oligomers of phenol units linked by CH₂ bridges at the ortho positions, made by base-catalysed condensation of a p-substituted phenol (classically p-tert-butylphenol) with formaldehyde. Gutsche named them after the Greek calix (a vase), from the cup shape of the tetramer.

  • Lower rim: the phenolic OH groups (narrow end), linked by a cyclic array of hydrogen bonds; easily alkylated or acylated to add ionophoric groups.
  • Upper rim: the para positions (wide end); the t-Bu groups can be removed and replaced.
  • Conformations of calix[4]arene: cone, partial cone, 1,2-alternate, 1,3-alternate. The parent tetraol prefers the cone (stabilised by lower-rim H-bonds); bulky lower-rim substituents can lock a chosen conformer.
  • Binding: lower-rim esters and amides bind alkali and alkaline-earth cations (Na⁺-selective tetraesters are known); the aromatic cavity binds small neutral guests and cations by cation–π contacts. Calixarenes are scaffolds: they preorganise whatever binding groups are attached.

Related bowls: resorcinarenes (from resorcinol and aldehydes, the basis of Cram’s cavitands) and calix[4]pyrroles (anion hosts, below).

Cyclodextrins

Cyclodextrins (CDs) are cyclic oligomers of α-1,4-linked D-glucopyranose, produced by enzymatic degradation of starch.

CDGlucose unitsFree OH groupsCavity diameter / Å (approx.)Typical guests
α-CD6184.7–5.3small aromatics, linear alkyl chains
β-CD7216.0–6.5naphthalene, adamantane derivatives, many drugs
γ-CD8247.5–8.3larger guests, sometimes two guests

Each glucose unit (C₆H₁₀O₅ in the ring) carries three free OH groups: secondary OH at C2 and C3, primary OH at C6. The molecule is a truncated cone (toroid):

  • Wider rim: the secondary hydroxyls (C2–OH, C3–OH).
  • Narrower rim: the primary hydroxyls (C6–OH).
  • Cavity: lined by C–H groups (H3, H5) and glycosidic oxygens; relatively hydrophobic. The exterior is hydrophilic, so CDs dissolve in water. β-CD is the least water-soluble of the three because of a tight belt of intramolecular H-bonds between C2-OH and C3-OH on neighbouring units.

Inclusion complexes form in water, driven by the hydrophobic effect, release of cavity water and van der Waals contacts. Evidence: upfield shifts of the inner H3 and H5 protons in ¹H NMR (shielded by an aromatic guest), induced circular dichroism of an achiral guest (the cavity is chiral), changed solubility and spectra.

Uses: solubilising and stabilising drugs, masking odours and tastes, chiral stationary phases for chromatography, enzyme models (Breslow’s CD-based catalysts), and as the macrocyclic component of rotaxanes and polyrotaxanes.

Cucurbiturils

Cucurbit[n]urils (CB[n]) are macrocycles of n glycoluril units joined by pairs of methylene bridges, formed from glycoluril and formaldehyde in acid. The name comes from their resemblance to a pumpkin (family Cucurbitaceae).

  • Rigid, highly symmetric (\( D_{nh} \)), with two identical carbonyl-lined portals and a hydrophobic cavity.
  • Portals bind cations (metal ions, ammonium groups) by ion–dipole interactions; the cavity takes the hydrophobic part of the guest.
  • Common sizes: CB[5], CB[6], CB[7], CB[8]; CB[8] can hold two aromatic guests at once (ternary complexes).
  • Cationic guests with a hydrophobic core and ammonium ends that fit both portals (for example, some ferrocene and adamantane diammonium derivatives with CB[7]) give some of the highest binding constants known for synthetic host–guest pairs in water. Part of the driving force is release of high-energy water from the rigid cavity.

Anion Recognition

Anion receptors were developed later than cation receptors because anions are harder to bind:

Feature of anionsConsequence for design
Larger than isoelectronic cations (lower charge density)weaker electrostatic binding
Strongly hydrated for their size; hydration follows a Hofmeister ordermust outcompete water
Varied geometries: spherical (Cl⁻), linear (N₃⁻), trigonal (NO₃⁻, CO₃²⁻), tetrahedral (SO₄²⁻, H₂PO₄⁻)host shape must match
Many exist only in a pH window (protonation of phosphate, carboxylate)binding is pH dependent

Strategies:

  1. Positively charged hosts. Protonated polyammonium macrocycles and cryptands bind anions by electrostatics plus N⁺–H···X⁻ hydrogen bonds. The first designed example was Park and Simmons’s katapinand, a bicyclic diammonium ion that encloses Cl⁻ in its cavity. Lehn’s protonated azacryptands bind halides and, with an elongated cavity, linear anions such as N₃⁻.
  2. Neutral hydrogen-bond donors. Amides, ureas and thioureas (a urea’s two parallel N–H bonds chelate a carboxylate or oxoanion), sulfonamides, pyrroles and indoles. Calix[4]pyrrole (four pyrrole N–H groups converging on the guest in its cone form) binds F⁻ and Cl⁻.
  3. Lewis-acidic hosts. Boranes and organomercury or organotin macrocycles accept electron density from the anion (fluoride sensing by triarylboranes).
  4. Metal-containing receptors. A coordinatively unsaturated metal centre (often Zn²⁺ or Cu²⁺ in a macrocycle) binds the anion directly.
  5. Anion–π and halogen-bond donors, the newer tools.

Charge neutral hosts bind more weakly but are more selective and less pH dependent; charged hosts bind more strongly but are less selective.

Clathrates and Lattice Inclusion

Some hosts form cavities only in the solid, by packing (clathrands):

  • Gas hydrates (clathrate hydrates): hydrogen-bonded water cages trap small molecules such as CH₄, CO₂ or Xe. Methane hydrate on continental margins and in permafrost holds large amounts of methane.
  • Urea inclusion compounds: urea crystallises in hydrogen-bonded helical channels that accept unbranched n-alkanes and fatty acids but not branched or cyclic ones, which can separate linear from branched hydrocarbons.
  • Hydroquinone (β-form) clathrates: H-bonded hydroquinone cages trap small gases (SO₂, Ar, Kr).

The guest is held by van der Waals contacts and cannot leave without destroying the lattice; dissolve the host and the guest is released. Porous frameworks that keep their cavities after the guest leaves (zeolites, MOFs) are discussed with crystal engineering in Self-Assembly, Interlocked Molecules and Supramolecular Devices.

Comparison of Host Families

HostBuilding blockShapeBinding sitesTypical guestsMain driving force
Crown ether–CH₂CH₂O–flexible ringether Oalkali, alkaline-earth, RNH₃⁺ion–dipole, H-bond
CryptandN(CH₂CH₂O…)₃NbicycleO + 2 Nalkali, alkaline-earthion–dipole, encapsulation
Spherandanisyl unitsrigid sphereOMeLi⁺, Na⁺preorganised ion–dipole
Calixarenephenol + CH₂cupOH/OR rim, π cavitycations, small neutralsion–dipole, cation–π
Cyclodextringlucosetruncated conehydrophobic cavityapolar organics in waterhydrophobic, vdW
Cucurbiturilglycoluril + CH₂pumpkin, two portalsC=O portals, cavitycationic organics, metal ionsion–dipole + hydrophobic
Polyammonium / urea / pyrrole hostsN–H donorsrings or cagesN–HanionsH-bond, electrostatic

Memory Tricks

Don’t Confuse

ThisvsThat
18-crown-6 (all alkyl ether O) binds K⁺ more stronglydibenzo-18-crown-6 (aryl ether O, less basic) binds more weakly
Template effect: kinetic, cation organises ring closuremacrocyclic effect: thermodynamic, extra stability of the cyclic complex
Cryptand: 3-D crypt, peak selectivity, slow exchangecrown: 2-D ring, flatter selectivity, fast exchange
Carrier ionophore (valinomycin): moves with the ionchannel former (gramicidin): forms a pore
Cyclodextrin cavity hydrophobic, exterior hydrophiliccrown ether cavity polar (O), exterior hydrophobic
Cavitand: open bowl, guest in and outcarcerand: closed, guest permanently trapped
Alkalide: alkali-metal anion M⁻electride: trapped electron as anion

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper. Binding constants marked “practice value” are illustrative.

Level 1: Foundation

  1. How many glucose units does γ-cyclodextrin contain?
  2. Which cryptand is best matched to Na⁺?
  3. What is the molecular formula of 15-crown-5?
Answers
  1. Eight.
  2. [2.2.1].
  3. C₁₀H₂₀O₅ (five –CH₂CH₂O– units).

Level 2: Part B Style

Practice Q1. KF dissolved in dry acetonitrile with 18-crown-6 converts benzyl bromide to benzyl fluoride much faster than KF alone. The main reason is that the crown ether:

(a) forms a covalent bond with fluoride (b) complexes K⁺, giving a weakly solvated, reactive fluoride (c) acts as a Lewis acid towards benzyl bromide (d) raises the dielectric constant of the solvent

Answer: (b)

The crown solubilises KF as [K(18-crown-6)]⁺F⁻. The “naked” fluoride, poorly solvated in an aprotic solvent and loosely paired, is a far stronger nucleophile.

Practice Q2. The total number of free hydroxyl groups in β-cyclodextrin, and the rim on which the primary hydroxyls lie, are:

(a) 21; narrow rim (b) 21; wide rim (c) 14; narrow rim (d) 18; wide rim

Answer: (a)

Seven glucose units × 3 OH = 21. The primary C6–OH groups are on the narrow rim.

Practice Q3. Which ionophore transports K⁺ selectively by binding it with six carbonyl oxygens inside a lipophilic exterior?

(a) monensin (b) gramicidin A (c) valinomycin (d) enterobactin

Answer: (c)

Valinomycin, a cyclic dodecadepsipeptide, is the classic K⁺ carrier. Monensin is Na⁺-selective; gramicidin forms channels; enterobactin binds Fe³⁺.

Practice Q4. A salt [Na(2.2.2)]⁺Na⁻ is best described as:

(a) an electride (b) a sodide (alkalide) (c) a sodium cluster compound (d) a sandwich complex

Answer: (b)

The second sodium is the Na⁻ anion; the cation is the cryptated Na⁺. Electrides have a trapped electron, not M⁻, as the anion.

Level 3: Part C Style

Practice Q5 (selectivity). In methanol at 298 K, 18-crown-6 has log K = 6.0 for K⁺ and log K = 4.3 for Na⁺ (practice values). (i) Find the K⁺/Na⁺ selectivity and \( \Delta\Delta G^\circ \). (ii) A cryptand binds K⁺ with log K = 10.5 (practice value) in the same solvent. By how much is \( \Delta G^\circ \) more negative than for the crown? (iii) Name the effect.

Answer

(i) Selectivity = 10^(6.0 − 4.3) = 10^1.7 ≈ 50. \( \Delta\Delta G^\circ = 1.7 \times 5.71 = \) 9.7 kJ mol⁻¹ in favour of K⁺.

(ii) \( \Delta(\log K) = 4.5 \); \( 4.5 \times 5.71 = \) 25.7 kJ mol⁻¹ more negative.

(iii) The cryptate effect: three-dimensional encapsulation and preorganisation of the bicyclic host, beyond the macrocyclic effect of the monocycle.

Practice Q6 (identify the host). A colourless, water-soluble host has molar mass 1135 g mol⁻¹, contains only C, H and O, and its ¹H NMR spectrum shows a single set of glucose-type signals. When naphthalene derivatives are added in D₂O, the H3 and H5 signals move upfield but H1, H2 and H4 barely move. Identify the host and explain the selective shifts.

Answer

A glucose-unit (C₆H₁₀O₅, 162.14 g mol⁻¹) macrocycle: 1135/162.14 = 7.0 units, so the host is β-cyclodextrin, C₄₂H₇₀O₃₅ (1134.99 g mol⁻¹). One set of signals means all seven units are equivalent (\( C_7 \) symmetry on the NMR timescale).

H3 and H5 point into the cavity; the included aromatic guest shields them by its ring current, so they move upfield. H1, H2 and H4 are on the outer surface and are hardly affected. The shifts show inclusion, not just surface association.

Practice Q7 (trends across a series). The following trends are observed (practice data, qualitative). Explain each.

  1. log K for K⁺ with 18-crown-6 is several units lower in water than in methanol.
  2. Dibenzo-18-crown-6 binds K⁺ more weakly than 18-crown-6.
  3. 1,4,7,10,13,16-hexathiacyclooctadecane (18-thiacrown-6) barely binds K⁺ but binds Ag⁺ well.
  4. Cs⁺ with 18-crown-6 gives a species whose Job plot (x-axis: mole fraction of crown) peaks near 0.67.
Answer
  1. Water solvates K⁺ (and the crown’s oxygens) more strongly than methanol; complexation must displace more strongly bound solvent, so K falls.
  2. Aryl ether oxygens are less basic (their lone pairs are partly delocalised into the ring) and the benzo units stiffen the ring in a less favourable shape.
  3. HSAB: thioether S is soft and suits soft Ag⁺; K⁺ is hard and prefers O donors.
  4. Cs⁺ is too large for the 18-crown-6 cavity, sits above the ring and is capped by a second crown: a 2 : 1 sandwich [Cs(18-crown-6)₂]⁺, giving a maximum at \( x = 2/3 \).

Practice Q8 (statements). Which statements are correct?

A. In the K⁺ complex of 18-crown-6 the ring adopts an approximately \( D_{3d} \) conformation. B. Cucurbit[n]urils bind cationic guests through carbonyl-lined portals. C. Calix[4]arene in its cone conformation has the phenolic OH groups at the wide (upper) rim. D. Anion receptors that are neutral H-bond donors are generally less pH dependent than protonated polyammonium receptors.

(a) A, B and D only (b) A and C only (c) B, C and D only (d) A, B, C and D

Answer: (a)

A: correct. B: correct. C: wrong; the phenolic OH groups form the lower (narrow) rim; the para substituents form the upper rim. D: correct; polyammonium receptors bind only when protonated, so binding depends on pH.

Quick Revision Table

IdeaFact
x-crown-yx ring atoms, y oxygens; 18-crown-6 = C₁₂H₂₄O₆
Size match12C4–Li⁺, 15C5–Na⁺, 18C6–K⁺, 21C7–Cs⁺
Too-large cationperches; 2 : 1 sandwich
Template effectK⁺ templates 18-crown-6 synthesis (kinetic)
Crown usesnaked anions, phase transfer, purple benzene
Cryptands[2.1.1] Li⁺, [2.2.1] Na⁺, [2.2.2] K⁺; cryptate effect; slow exchange
Alkalide / electride[Na(2.2.2)]⁺Na⁻ / [Cs(18C6)₂]⁺e⁻
Spherandsrigid anisyl hosts, Li⁺/Na⁺, preorganisation
Ionophoresvalinomycin K⁺ (6 C=O); nonactin K⁺; monensin Na⁺; gramicidin channel
Calixarenesphenol + HCHO; lower rim OH, upper rim para; cone, partial cone, 1,2- and 1,3-alternate
Cyclodextrinsα 6, β 7, γ 8 glucose; primary OH narrow rim; hydrophobic cavity; β least soluble
Cucurbiturilsglycoluril + HCHO; carbonyl portals; cationic guests; very high K
Anion hostspolyammonium, katapinand, urea/thiourea, calix[4]pyrrole, Lewis acids
Clathratesgas hydrates, urea channels (linear alkanes), hydroquinone

Key Takeaways

What’s Next