Skip to content

Self-Assembly, Interlocked Molecules and Supramolecular Devices

CSIR NET supramolecular chemistry: self-assembly, helicates and cages, catenanes, rotaxanes, molecular machines, crystal engineering, MOFs and sensors.

  • 20 min read
  • Updated
On this page · 17 sections
  1. Prerequisites
  2. The Hook: Two Rings With No Bond Between Them
  3. Self-Assembly
  4. Metal-Directed Self-Assembly
  5. Hydrogen-Bonded Assemblies and Supramolecular Polymers
  6. Mechanically Interlocked Molecules
  7. Molecular Switches, Shuttles and Motors
  8. Crystal Engineering and Porous Frameworks
  9. Supramolecular Devices: Sensing and Signalling
  10. Characterising Assemblies
  11. Memory Tricks
  12. Don’t Confuse
  13. Common Mistakes
  14. Practice
  15. Quick Revision Table
  16. Key Takeaways
  17. What’s Next

Prerequisites

The Hook: Two Rings With No Bond Between Them

How CSIR NET asks it. Part B: definitions (self-assembly, template, catenane vs rotaxane, pseudorotaxane), which metal geometry gives which assembly, the supramolecular synthon of a carboxylic acid, what a PET sensor does. Part C: counting components and charges in metallosupramolecular cages; populations and free energies of shuttle co-conformers from NMR; exchange rates from coalescence; sizes from diffusion (DOSY) data; statement sets on motors and switches.


Self-Assembly

Self-assembly is the spontaneous, reversible association of two or more components into a larger, non-covalently bonded aggregate whose structure is encoded in the components. Its hallmarks:

  1. Reversibility. Bonds form and break under the conditions of assembly, so mistakes are corrected (error checking, “proof-reading”).
  2. Thermodynamic control. The product is the free-energy minimum of the system, not the fastest-forming species.
  3. Information in the components. Geometry of binding sites (angles, number of sites, H-bond pattern) decides the final structure.
  4. Cooperativity. Later bonds are intramolecular and benefit from high effective molarity, so assembly is often all-or-nothing.

Biology is the model: the DNA double helix forms from complementary strands; tobacco mosaic virus coat protein and its RNA self-assemble into infectious virus particles from separated components; lipid bilayers form spontaneously in water.

Kinds of assembly processes

ProcessWhat happensExample
Strict self-assemblycomponents mix and the product forms reversiblyhelicates, Pd(II) squares and cages, H-bonded rosettes
Self-assembly with covalent modificationassembly, then an irreversible step fixes itSauvage catenane: template, then ring closure
Templated synthesisa species not part of the final product directs the outcomeK⁺-templated 18-crown-6; Cu(I)-templated catenane (copper then removed)
Self-organisationassembly into ordered phases or materialsliquid crystals, micelles, MOF crystals
Dynamic covalent chemistryreversible covalent bonds (imine, disulfide, boronate ester) under thermodynamic controlimine cages, dynamic combinatorial libraries

In a dynamic combinatorial library, components exchange through reversible bonds; adding a template (a guest) that binds one library member strongly shifts the equilibrium to amplify that member. This is selection by the guest.

Templates can be classified as positive (they bring reactive ends together, favouring the target) or negative (they block an unwanted product), and as kinetic (stabilise a transition state, effective only during reaction) or thermodynamic (stabilise the product, shifting an equilibrium).

Metal-Directed Self-Assembly

Metal–ligand bonds are strong, directional and, for labile metals such as Cu(I), Pd(II) or Zn(II), reversible enough for error correction. The metal’s coordination geometry provides the angles.

Helicates

Lehn’s helicates are formed when ligand strands containing several chelating units (for example, oligo-2,2′-bipyridines linked by spacers) wrap around a row of metal ions:

  • Cu(I) (tetrahedral) takes two bipyridines: two strands wind round each other to give a double-stranded helicate, [Cuₙ(strand)₂]ⁿ⁺ with n metals for n bipyridine units per strand.
  • Octahedral metals (for example Ni(II) or Co(II)) take three bipyridines: triple-stranded helicates.
  • The two helical senses (P and M) are formed as a racemate unless a chiral strand is used.
  • Assembly is cooperative: once the first metal is bound, the rest of the helix forms readily.
  • Self-recognition: a mixture of strands of different lengths, given Cu(I), sorts itself into helicates containing only identical strands, because mixed helicates would leave binding sites unsatisfied.

Molecular polygons and polyhedra: directional bonding

A metal with fixed bond angles plus a rigid ligand with fixed donor directions gives a predictable closed structure. A common building block is a square-planar Pd(II) or Pt(II) ion with two cis sites blocked by a chelating amine or diphosphine, leaving a 90° corner.

Metal building blockLigandProduct
cis-blocked Pd(II)/Pt(II), 90° cornerlinear ditopic (4,4′-bipyridine)molecular square M₄L₄, e.g. [{Pd(en)}₄(4,4′-bpy)₄]⁸⁺ (Fujita)
60° angular unitlinear ditopic linkermolecular triangle M₃L₃
cis-blocked Pd(II), 90°planar tritopic (2,4,6-tris(4-pyridyl)-1,3,5-triazine)octahedral cage M₆L₄
“naked” Pd(II), four sitesbent ditopic bis(pyridine)spheres MₙL₂ₙ (e.g. M₁₂L₂₄); size set by the ligand bend angle
metal tris-chelate (octahedral)bis-bidentate ligandtetrahedral cages M₄L₆

Counting rule (charge and donor balance). In a closed structure with no dangling sites, every metal coordination site meets one ligand donor:

$$(\text{number of metals}) \times (\text{open sites per metal}) = (\text{number of ligands}) \times (\text{donors per ligand})$$

For M₆L₄: 6 × 2 = 4 × 3 = 12. For M₁₂L₂₄: 12 × 4 = 24 × 2 = 48. With neutral pyridyl ligands, the cage charge is the sum of the metal charges: [Pd₆L₄]¹²⁺ (with Pd(en) corners), balanced by twelve anions.

Cages as containers. The M₆L₄ cage and its relatives bind organic guests in water through the hydrophobic effect. Reactions run inside such cages can show unusual selectivity or rates, because the guest is confined and preorganised, as in an enzyme pocket.

Hydrogen-Bonded Assemblies and Supramolecular Polymers

  • Rosettes and tapes: cyanuric acid and melamine have complementary ADA/DAD faces; their 1 : 1 mixture forms either infinite tapes or, with bulky substituents that block tape growth, a cyclic hexameric rosette (Whitesides).
  • Capsules: Rebek’s self-complementary bowls dimerise through a seam of H-bonds into closed capsules (“tennis balls”, “softballs”) that encapsulate small guests reversibly.
  • Supramolecular polymers: monomers joined end to end by strong, directional, reversible interactions. Meijer’s ureidopyrimidinone (UPy) unit forms a self-complementary DDAA·AADD quadruple hydrogen bond with a very high dimerisation constant in chloroform. A molecule with UPy at both ends forms long chains whose length responds to temperature, concentration and solvent, giving materials that flow when hot and are polymeric when cool (self-healing materials).

For a supramolecular polymer with isodesmic growth (each association step has the same constant K), the degree of polymerisation rises roughly as \( \sqrt{Kc} \) at high concentration: chains only become long when Kc is large, which is why very high association constants are needed.

Mechanically Interlocked Molecules

SpeciesDescriptionSeparable without breaking a covalent bond?
[2]Catenanetwo interlocked ringsno
[n]Catenanen interlocked rings (e.g. olympiadane is a [5]catenane)no
[2]Rotaxanea ring threaded on an axle (dumbbell) with bulky stoppers at both endsno (kinetically trapped)
Pseudorotaxanering threaded on an axle without stoppersyes, it dethreads
Molecular knot (trefoil)a single closed strand with crossingstopologically knotted
Borromean ringsthree rings, no two linked, but all three inseparableno

The bracketed number gives the number of mechanically interlocked components. A catenane is topologically interlocked; a rotaxane is held only by its stoppers, so if the stoppers are smaller than the ring cavity, it can slip off.

Making them

  1. Statistical threading (early work): very low yields because threading is rare.
  2. Metal template (Sauvage): Cu(I) holds two 2,9-diaryl-1,10-phenanthroline units at right angles in a tetrahedral complex; ring closure, then demetallation with cyanide, gives the free catenane (catenand). Re-metallation is possible. The same principle with a double-stranded helicate gave a trefoil knot.
  3. π Donor–acceptor template (Stoddart): the electron-poor tetracationic cyclophane cyclobis(paraquat-p-phenylene) (CBPQT⁴⁺, two 4,4′-bipyridinium units bridged by p-xylylene groups) threads onto electron-rich hydroquinone or 1,5-dioxynaphthalene units of a polyether. Stacking, C–H···O H-bonds and electrostatics hold the complex during ring closure (“clipping”) or stoppering.
  4. Hydrogen-bond templates: amide-based macrocycles that form around amide- or ammonium-containing threads (crown ether ⊃ dialkylammonium ion is a classic pseudorotaxane motif).
  5. Active-metal template: the metal binds the thread inside the ring and also catalyses the bond-forming reaction (for example, Cu-catalysed azide–alkyne cycloaddition) that stoppers it, so it does double duty.

Rotaxane strategies by order of operations:

graph LR
    A[Ring + axle] --> B[Threading: pseudorotaxane]
    B --> C[Stoppering: add bulky ends]
    D[Dumbbell + ring precursor] --> E[Clipping: close ring around axle]
    F[Ring + finished dumbbell] --> G[Slipping: heat pushes ring over stoppers, trapped on cooling]
    C --> R[Rotaxane]
    E --> R
    G --> R

Molecular Switches, Shuttles and Motors

Switches and shuttles

A molecular shuttle is a [2]rotaxane whose axle has two (or more) recognition sites, called stations. The ring spends most time at the station it binds better. In a degenerate shuttle the stations are identical and the ring hops between them at a rate measurable by variable-temperature NMR. In a switchable shuttle, an external stimulus changes the relative binding of the stations:

  • Redox: oxidising an electron-rich station (for example tetrathiafulvalene or benzidine) to a cation makes it repel CBPQT⁴⁺, which moves to the other station; reduction resets it.
  • pH: protonating an amine station (ammonium binds a crown ether) or deprotonating it switches the ring between stations.
  • Light: photoisomerisation of an azobenzene or stilbene unit changes its shape and binding.

The population ratio of the two co-conformers gives the free-energy difference between stations: \( \Delta G^\circ = -RT\ln([\text{B}]/[\text{A}]) \).

A switch has two states and returns along the same path when the stimulus is reversed: it does no net work over a cycle. A motor moves directionally and repetitively through a cycle, and so can do work.

Feringa’s light-driven rotary motor

Feringa’s motors are overcrowded alkenes: two bulky helical halves joined by a C=C bond, each half carrying a stereogenic centre (for example a methyl group) that biases the helix. One full 360° rotation of one half relative to the other takes four steps:

  1. Photochemical E → Z isomerisation (UV light): gives an unstable isomer with the methyl groups forced into a strained pseudo-equatorial position.
  2. Thermal helix inversion: relaxes to the stable isomer; this step is irreversible in practice and sets the direction.
  3. Photochemical Z → E isomerisation.
  4. Thermal helix inversion back to the starting isomer.

Unidirectionality comes from the stereogenic centres: the energetically downhill thermal steps happen in one sense only, acting as a ratchet. The rotation speed is set by the barrier of the thermal steps, which can be tuned by changing the size of the bridging ring or substituents.

Crystal Engineering and Porous Frameworks

Crystal engineering designs solid-state structures from knowledge of intermolecular interactions.

  • Supramolecular synthon (Desiraju): a robust, recurring structural unit formed by intermolecular interactions, which can be used in crystal design as a synthon is used in synthesis. Examples: the carboxylic acid dimer (two O–H···O=C bonds), the amide dimer, the acid–pyridine heterosynthon (O–H···N), halogen-bonded I···N contacts.
  • Graph-set notation (Etter): a hydrogen-bond motif is written \( G^a_d(n) \), where G = R (ring), C (chain), D (discrete, finite) or S (intramolecular, self); a = number of acceptors; d = number of donors; n = number of atoms in the ring or repeat. The carboxylic acid dimer is \( R^2_2(8) \).
  • Co-crystals: crystals of two or more neutral molecular components in a fixed ratio, often built with heterosynthons (acid–pyridine, acid–amide). Pharmaceutical co-crystals change solubility or stability without changing the drug molecule.
  • Polymorphism: one compound, more than one crystal structure; different polymorphs can have different solubility, melting point and bioavailability.

Coordination polymers and MOFs. Metal ions or clusters (nodes or secondary building units) linked by multitopic organic ligands (linkers) into extended 1-D, 2-D or 3-D networks. Metal–organic frameworks (MOFs) are those with permanent porosity. The prototype MOF-5 (Yaghi) is Zn₄O(BDC)₃: Zn₄O tetrahedral clusters joined by 1,4-benzenedicarboxylate into a cubic network. Reticular chemistry means choosing node geometry and linker length to target a network; extending the linker enlarges the pores without changing the topology (isoreticular series). MOFs have very large internal surface areas and are studied for gas storage, separation and catalysis. Covalent organic frameworks (COFs) use reversible covalent bonds (boronate esters, imines) instead of metal–ligand bonds.

Supramolecular Devices: Sensing and Signalling

A chemosensor combines a receptor (binds the analyte) with a signalling unit (reports binding as a change in colour, fluorescence or potential).

Photoinduced electron transfer (PET) sensors (de Silva’s fluorophore–spacer–receptor design):

graph LR
    A[Fluorophore] --- B[Spacer, e.g. CH2] --- C[Receptor with lone pair, e.g. amine or aza-crown]
    C -->|no guest: lone pair transfers e- to excited fluorophore| D[Fluorescence OFF]
    C -->|guest bound: H+ or metal ion ties up lone pair| E[Fluorescence ON]

The receptor’s lone-pair orbital lies between the fluorophore’s HOMO and LUMO in energy. After excitation, an electron moves from the receptor into the half-filled HOMO of the fluorophore, quenching emission. Binding H⁺ or a metal ion lowers the energy of the lone pair below the fluorophore HOMO, PET stops and fluorescence switches on: an “off–on” sensor. With two receptors for two different inputs (for example H⁺ and Na⁺), fluorescence appears only when both are bound, which behaves as a molecular AND logic gate.

Other signalling modes: chromogenic sensors (colour change, for example by charge transfer or deprotonation on anion binding), ion-selective electrodes with ionophore-loaded membranes (valinomycin electrodes for K⁺), and photoresponsive hosts in which an azobenzene unit (trans → cis with UV light, back with visible light or heat) changes the shape of an attached crown ether and so its binding.

Characterising Assemblies

MethodWhat it tells you
¹H NMRsymmetry of the assembly (one set of signals for equivalent components), binding-induced shifts, exchange rates
DOSY NMRdiffusion coefficient D; all signals of one assembly share the same D; size from Stokes–Einstein
ESI mass spectrometrycomposition of intact assemblies (charge states of M₆L₄¹²⁺ minus counter-ions)
X-ray crystallographyfull structure in the solid state
UV–vis, fluorescence, CDbinding, switching, helicity
Electrochemistryredox-driven switching (shuttles)

Stokes–Einstein: \( D = \dfrac{k_BT}{6\pi\eta r_H} \), so \( r_H \propto 1/D \) at fixed T and viscosity; a three-fold drop in D means a three-fold larger hydrodynamic radius (about 27-fold larger volume for a sphere).

Coalescence and exchange rate. Two equally populated sites exchanging (for example, a ring shuttling between identical stations) give two NMR signals separated by Δν (Hz) at low temperature; they merge at the coalescence temperature \( T_c \), where

$$k_c = \frac{\pi\,\Delta\nu}{\sqrt{2}}, \qquad \Delta G^\ddagger = RT_c\ln\!\left(\frac{k_BT_c}{h\,k_c}\right)$$

(see Magnetic Resonance Principles and the Eyring equation in Collision, Transition-State and Unimolecular Theory).

Memory Tricks

Don’t Confuse

ThisvsThat
Catenane: interlocked rings, topological bondrotaxane: ring on a stoppered axle, held kinetically
Rotaxane (stoppered)pseudorotaxane (no stoppers, dethreads)
Template (may be removed after use, e.g. Cu(I))building block (stays in the product, e.g. Pd(II) corner)
Switch: two states, no net work per cyclemotor: directional, repetitive, can do work
Kinetic template: stabilises transition statethermodynamic template: stabilises product
Coordination polymer: any extended M–L networkMOF: coordination network with permanent porosity
Co-crystal: neutral componentssalt: proton transferred between components
Supramolecular synthon: intermolecular motifsynthon (organic synthesis): idealised fragment for disconnection

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper. Data marked “practice value” are illustrative.

Level 1: Foundation

  1. What distinguishes a rotaxane from a pseudorotaxane?
  2. Which metal ion did Sauvage use as the template for catenane synthesis, and what geometry does it prefer?
  3. Write the graph-set descriptor of the carboxylic acid hydrogen-bonded dimer.
Answers
  1. A rotaxane has bulky stoppers at both ends of the axle that prevent the ring from slipping off; a pseudorotaxane has none.
  2. Cu(I), which prefers tetrahedral coordination (two bidentate phenanthrolines at right angles).
  3. \( R^2_2(8) \).

Level 2: Part B Style

Practice Q1. A cis-protected square-planar Pd(II) unit, [Pd(en)]²⁺, is mixed with 4,4′-bipyridine in water. The expected product is:

(a) an infinite zigzag chain (b) a molecular square [{Pd(en)}₄(bpy)₄]⁸⁺ (c) an octahedral M₆L₄ cage (d) a double helicate

Answer: (b)

90° corners plus linear ditopic linkers close into a square, M₄L₄. With four Pd(II), the charge is 8+.

Practice Q2. In a photoinduced electron transfer (PET) sensor built from anthracene–CH₂–amine, fluorescence is weak at pH 10 and strong at pH 3. The best explanation is:

(a) protonation lowers the energy of the amine lone pair so it can no longer reduce the excited fluorophore (b) protonation increases the rate of PET (c) anthracene itself is protonated at pH 3 (d) the amine forms an exciplex only when protonated

Answer: (a)

At pH 10 the free amine lone pair quenches the excited anthracene by electron transfer. Protonation ties up the lone pair, PET stops and fluorescence switches on.

Practice Q3. In a light-driven rotary motor based on an overcrowded alkene, the number of steps per full 360° rotation and the steps that ensure unidirectionality are:

(a) two; both photochemical (b) four; the two photochemical steps (c) four; the two thermal helix inversions (d) three; one thermal step

Answer: (c)

Photo E→Z, thermal helix inversion, photo Z→E, thermal helix inversion. The thermal steps are effectively irreversible and directional, so they ratchet the motion.

Practice Q4. Mixing a tritopic planar ligand L (three pyridyl donors at 120°) with [Pd(en)]²⁺ (two cis open sites) gives a closed cage in which the Pd atoms sit at the six vertices of an octahedron and no donor or metal site is left free. Its formula is:

(a) Pd₃L₂ (b) Pd₄L₄ (c) Pd₆L₄ (d) Pd₁₂L₂₄

Answer: (c)

Six Pd at the vertices supply 6 × 2 = 12 open sites; each L supplies 3 donors, so 12/3 = 4 ligands, which cap alternate faces of the octahedron. Pd₄L₄ does not balance (8 ≠ 12); Pd₃L₂ balances but has only three metals; Pd₁₂L₂₄ needs metals with four open sites and ditopic ligands.

Level 3: Part C Style

Practice Q5 (shuttle populations). In a [2]rotaxane with two different stations A and B, the ring spends 85 % of its time on station A at 298 K (from integration of slow-exchange ¹H NMR signals, practice value). (i) Find \( \Delta G^\circ \) for A → B. (ii) After oxidising station A, the ratio becomes 10 : 90 (A : B). By how much has the relative stability changed?

Answer

(i) \( K = [\text{B}]/[\text{A}] = 15/85 = 0.176 \). \( \Delta G^\circ = -RT\ln K = -(8.314)(298.15)\ln(0.176) = \) +4.3 kJ mol⁻¹ (A is preferred).

(ii) Now \( K = 90/10 = 9 \); \( \Delta G^\circ = -RT\ln 9 = -5.4 \) kJ mol⁻¹. The change is \( -5.4 - 4.3 \approx \) −9.7 kJ mol⁻¹: oxidation has inverted the preference, which is the switching event.

Practice Q6 (coalescence). In a degenerate molecular shuttle, a proton on the axle gives two equal signals separated by 120 Hz at low temperature (ring on one station or the other). The signals coalesce at 320 K. Estimate the exchange rate constant at coalescence and \( \Delta G^\ddagger \) for shuttling.

Answer

\( k_c = \pi\Delta\nu/\sqrt{2} = \pi(120)/1.414 = \) 267 s⁻¹.

\( \Delta G^\ddagger = RT_c\ln(k_BT_c/hk_c) \). \( k_BT_c/h = (1.381\times10^{-23} \times 320)/(6.626\times10^{-34}) = 6.67\times10^{12} \) s⁻¹; divided by 267 gives \( 2.50\times10^{10} \); ln = 23.94. \( \Delta G^\ddagger = 8.314 \times 320 \times 23.94 \) J mol⁻¹ ≈ 63.7 kJ mol⁻¹.

Practice Q7 (DOSY and composition). A Pd(II) cage is assembled in D₂O at 298 K (viscosity 0.89 mPa s, practice value; H₂O value used for simplicity). The free ligand has \( D = 6.0 \times 10^{-10} \) m² s⁻¹ and every cage signal has \( D = 2.0 \times 10^{-10} \) m² s⁻¹. (i) Estimate both hydrodynamic radii. (ii) Why does it matter that all cage signals share one D? (iii) ESI-MS of the nitrate salt shows a peak series assigned to [M − n NO₃]ⁿ⁺ for n = 4 to 8 with no peaks for a smaller assembly. What does this add?

Answer

(i) \( r_H = k_BT/(6\pi\eta D) \). For the ligand: \( (1.381\times10^{-23} \times 298.15)/(6\pi \times 0.89\times10^{-3} \times 6.0\times10^{-10}) = 4.1\times10^{-10} \) m = 0.41 nm. For the cage, D is three times smaller, so \( r_H \) = 1.23 nm (three times larger; about 27 times the volume).

(ii) One D for all signals shows they belong to a single species of one size, not a mixture of oligomers.

(iii) A consistent series of charge states with successive loss of nitrate confirms the mass and composition of one discrete assembly, independent of NMR.

Practice Q8 (statements). Which statements are correct?

A. A [2]catenane can be separated into two rings only by breaking a covalent bond. B. In Stoddart’s systems the tetracationic cyclophane CBPQT⁴⁺ binds electron-rich aromatic units such as 1,5-dioxynaphthalene. C. A molecular switch that returns to its original state by the reverse path can do net mechanical work over a cycle. D. In MOF-5, Zn₄O clusters are linked by 1,4-benzenedicarboxylate.

(a) A, B and D only (b) A and C only (c) B, C and D only (d) A, B, C and D

Answer: (a)

A: correct (topological, mechanical bond). B: correct (π donor–acceptor recognition). C: wrong; a switch that retraces its path undoes any work it did; directional, cyclic motion (a motor) is needed. D: correct.

Quick Revision Table

IdeaFact
Self-assemblyspontaneous, reversible, thermodynamic control, error correction, cooperative
Templatespositive/negative; kinetic/thermodynamic; K⁺ for crowns, Cu(I) for catenanes
Dynamic covalentimines, disulfides, boronate esters; guest amplifies best library member
HelicatesCu(I) + bipyridine strands → double; octahedral M → triple; self-recognition
Directional bonding90° Pd corner + linear → M₄L₄ square; + tritopic → M₆L₄; naked Pd + bent → MₙL₂ₙ
Site balancemetals × open sites = ligands × donors
H-bondedcyanuric acid–melamine rosette; capsules; UPy DDAA·AADD supramolecular polymer
Interlocked[n]catenane, rotaxane (stoppers), pseudorotaxane (none), trefoil knot
Templates for MIMsCu(I)–phen (Sauvage); CBPQT⁴⁺–electron-rich arene (Stoddart); H-bond; active-metal
Shuttlestations; switching by redox, pH, light; \( \Delta G^\circ = -RT\ln(\text{ratio}) \)
Feringa motorovercrowded alkene; photo, thermal, photo, thermal; thermal steps set direction
Crystal engineeringsupramolecular synthon (Desiraju); graph set \( G^a_d(n) \); acid dimer \( R^2_2(8) \)
MOFsnode + linker, porous; MOF-5 = Zn₄O(BDC)₃; isoreticular expansion
PET sensorfluorophore–spacer–receptor; binding switches fluorescence on; AND gate
CharacterisationNMR, DOSY (\( r_H \propto 1/D \)), ESI-MS, X-ray; \( k_c = \pi\Delta\nu/\sqrt{2} \)

Key Takeaways

What’s Next

Advertisement
Advertisement