Skip to content

Coordination Compounds: Geometry, Isomerism and Valence Bond Theory

CSIR NET chemistry: transition elements, Werner's theory, coordination numbers and shapes, chelate effect, isomer counting and valence bond theory of complexes.

  • 17 min read
  • Updated
On this page · 14 sections
  1. Prerequisites
  2. The Hook: Four Cobalt Chlorides
  3. Transition Elements: What Makes Them Different
  4. Werner’s Theory and Its Vocabulary
  5. Coordination Numbers and Geometries
  6. Isomerism in Coordination Compounds
  7. Valence Bond Theory of Complexes
  8. Memory Tricks
  9. Don’t Confuse
  10. Common Mistakes
  11. Practice
  12. Quick Revision Table
  13. Key Takeaways
  14. What’s Next

Prerequisites

The Hook: Four Cobalt Chlorides

Transition Elements: What Makes Them Different

Transition element (IUPAC)
An element whose atom has an incomplete d subshell, or which can give rise to cations with an incomplete d subshell.

By this definition Zn, Cd and Hg (always \( d^{10} \) in their common compounds) are d-block elements but not transition elements. Sc is included because Sc itself is \( 3d^1 4s^2 \).

The chemistry of the d block follows from a partly filled d subshell that lies close in energy to the next s and p orbitals:

PropertyOriginExample
Variable oxidation states(n−1)d and ns electrons close in energyMn from +2 to +7
Coloured compoundsd–d and charge-transfer transitions in the visible[Cu(H₂O)₆]²⁺ blue
Paramagnetismunpaired d electrons[Fe(H₂O)₆]³⁺, 5 unpaired
Complex formationsmall, charged ions with vacant orbitals[Fe(CN)₆]⁴⁻
Catalysisvariable oxidation state, vacant sitesV₂O₅ in the contact process, Fe in the Haber process
  • Across 3d: the maximum oxidation state equals the group number up to Mn (+7 in MnO₄⁻). After Mn the maximum falls: Fe reaches +6 only in ferrate (FeO₄²⁻), and Co, Ni and Cu are rarely above +3 or +4. The +2 state becomes steadily more stable from left to right because the d electrons are held more tightly as \( Z_{\text{eff}} \) rises.
  • Down a group: high oxidation states become more stable. Cr(VI) in dichromate is a strong oxidant; Mo(VI) and W(VI) are the normal, stable states of those elements. Ru and Os reach +8 (RuO₄, OsO₄); Fe does not.
  • 4d and 5d twins: the lanthanide contraction makes Zr and Hf (and Nb/Ta, Mo/W) almost the same size, so their chemistry is very similar. The 4d and 5d metals form low-spin complexes almost always (next topic).

Werner’s Theory and Its Vocabulary

Werner’s postulates, in modern words:

  1. A metal in a complex has two kinds of valence: the primary (ionisable) valence, which is the oxidation state, and the secondary (non-ionisable) valence, which is the coordination number.
  2. The secondary valence is satisfied by ligands (anions or neutral molecules) bound directly to the metal.
  3. The secondary valences point in fixed directions in space, so complexes have definite geometries and can show stereoisomerism.

Werner’s evidence for the octahedron was isomer counting. For [MA₄B₂], a hexagonal planar or trigonal prismatic arrangement predicts three isomers; an octahedron predicts exactly two (cis and trans). Only two were ever found. His resolution of a carbon-free cation, “hexol”, [Co{(OH)₂Co(NH₃)₄}₃]⁶⁺, into optical isomers ended the argument that optical activity needed carbon. Werner received the Nobel Prize in Chemistry in 1913.

Ligands

TermMeaningExamples
Monodentateone donor atomNH₃, H₂O, Cl⁻, CO, py
Bidentatetwo donor atomsen (H₂NCH₂CH₂NH₂), ox²⁻, bipy, phen, acac⁻, gly⁻
Polydentatethree or moredien (3), trien (4), EDTA⁴⁻ (6)
Ambidentatecan bind through either of two atomsNO₂⁻ (N or O), SCN⁻ (S or N), CN⁻ (C or N)
Bridging (μ)binds two or more metals at onceOH⁻ in hexol, Cl⁻ in Al₂Cl₆-type dimers, CO in Fe₂(CO)₉

The chelate and macrocyclic effects

A chelate (ring-forming) complex is more stable than the analogous complex with monodentate ligands of the same donor type. Compare

$$[\text{Ni(NH}_3)_6]^{2+} \;(\log\beta_6 \approx 8.6) \qquad [\text{Ni(en)}_3]^{2+} \;(\log\beta_3 \approx 18.3)$$

Both have six Ni–N bonds, so the enthalpy change on forming them is similar. The difference is entropy: in

$$[\text{Ni(NH}_3)_6]^{2+} + 3\,\text{en} \rightarrow [\text{Ni(en)}_3]^{2+} + 6\,\text{NH}_3$$

four particles become seven. Five-membered chelate rings (en, ox, gly) are the most stable for saturated ligands; six-membered rings suit conjugated ligands such as acac⁻. A macrocyclic ligand (a cyclic polyamine, a porphyrin) adds a further increase in stability over the open-chain chelate with the same donors, the macrocyclic effect.

Naming, in brief

  • Cation first, anion second. Inside the bracket, ligands in alphabetical order (ignore multiplying prefixes), then the metal, then the oxidation state in Roman numerals.
  • Anionic ligands end in -ido in current IUPAC usage: chlorido, cyanido, hydroxido; older texts use chloro, cyano. Neutral: aqua, ammine, carbonyl, nitrosyl.
  • An anionic complex takes -ate: ferrate, cuprate, argentate, aurate, plumbate, stannate.

Examples: [Co(NH₃)₅Cl]Cl₂, pentaamminechloridocobalt(III) chloride; K₃[Fe(CN)₆], potassium hexacyanidoferrate(III); [Pt(NH₃)₂Cl₂], diamminedichloridoplatinum(II).

Coordination Numbers and Geometries

CNGeometryTypical metals / examples
2linear\( d^{10} \): [Ag(NH₃)₂]⁺, [Au(CN)₂]⁻, [CuCl₂]⁻
3trigonal planarrare; [HgI₃]⁻
4tetrahedralnon-\( d^8 \), weak-field or bulky ligands: [NiCl₄]²⁻, [CoCl₄]²⁻, [Zn(NH₃)₄]²⁺, Ni(CO)₄
4square planar\( d^8 \) with strong-field ligands, and almost all 4d/5d \( d^8 \): [Ni(CN)₄]²⁻, [PdCl₄]²⁻, [PtCl₄]²⁻, [AuCl₄]⁻
5trigonal bipyramidal / square pyramidalFe(CO)₅ (TBP); [Ni(CN)₅]³⁻ is known in both forms in one crystal, so the two shapes differ little in energy
6octahedral (commonest); trigonal prismatic (rare)almost all [M(H₂O)₆]ⁿ⁺; trigonal prisms with some dithiolene ligands
7pentagonal bipyramid, capped octahedronlarger, early metals
8square antiprism, dodecahedron[Mo(CN)₈]⁴⁻ (either, depending on the crystal)
9tricapped trigonal prism[ReH₉]²⁻

Large coordination numbers need a large metal, a high oxidation state and small ligands; low coordination numbers need bulky ligands or soft, \( d^{10} \) metals.

Isomerism in Coordination Compounds

graph TD
    A[Isomers] --> B[Structural: different bonds]
    A --> C[Stereoisomers: same bonds, different arrangement]
    B --> B1[Ionisation]
    B --> B2[Hydrate / solvate]
    B --> B3[Linkage]
    B --> B4[Coordination]
    B --> B5[Ligand / polymerisation]
    C --> C1[Geometrical: cis/trans, fac/mer]
    C --> C2[Optical: Δ / Λ enantiomers]

Structural isomers

TypeWhat exchangesExample pair
Ionisationa ligand with a counter-ion[Co(NH₃)₅Br]SO₄ (gives BaSO₄ with Ba²⁺) and [Co(NH₃)₅(SO₄)]Br (gives AgBr with Ag⁺)
Hydrate (solvate)water inside and outside the sphere[Cr(H₂O)₆]Cl₃ (violet), [Cr(H₂O)₅Cl]Cl₂·H₂O (blue-green), [Cr(H₂O)₄Cl₂]Cl·2H₂O (dark green)
Linkagedonor atom of an ambidentate ligand[Co(NH₃)₅(NO₂)]²⁺ nitro (N-bound, yellow) and [Co(NH₃)₅(ONO)]²⁺ nitrito (O-bound, red)
Coordinationligands swapped between cation and anion complexes[Co(NH₃)₆][Cr(CN)₆] and [Cr(NH₃)₆][Co(CN)₆]
Polymerisationsame empirical formula, different molecular size[Pt(NH₃)₂Cl₂] and [Pt(NH₃)₄][PtCl₄]

Geometrical isomers

  • Square planar MA₂B₂: cis and trans ([Pt(NH₃)₂Cl₂]: cisplatin is the anticancer drug; transplatin is inactive). MA₃B and MA₄ have no isomers. MABCD has three.
  • Octahedral MA₄B₂: cis (B atoms at 90°) and trans (180°).
  • Octahedral MA₃B₃: fac (three A on one face) and mer (three A in a meridian, two of them trans).
  • Tetrahedral complexes show no geometrical isomerism, because every position is adjacent to every other.

Optical isomers

An octahedral complex is chiral if it has no improper rotation axis (no mirror plane, no centre of inversion, no \( S_4 \) or \( S_6 \)). The standard cases:

  • [M(AA)₃], e.g. [Co(en)₃]³⁺ and [Cr(ox)₃]³⁻: a three-bladed propeller, Δ (right-handed) and Λ (left-handed).
  • cis-[M(AA)₂B₂], e.g. cis-[Co(en)₂Cl₂]⁺: chiral. The trans isomer has a mirror plane and is achiral. So [Co(en)₂Cl₂]⁺ has three stereoisomers: trans, Δ-cis and Λ-cis.
  • Tetrahedral MABCD: chiral, like a stereogenic carbon (rarely isolable for labile complexes).
  • Square planar complexes with achiral ligands are never chiral (the molecular plane is a mirror plane).

Counting octahedral stereoisomers

Learn this table; Part B often asks one entry, and Part C asks you to separate geometrical isomers from the total.

FormulaGeometrical isomersTotal stereoisomers (enantiomers counted separately)
MA₅B11
MA₄B₂22
MA₃B₃22
MA₄BC22
MA₃B₂C33
MA₃BCD45
MA₂B₂C₂56
MA₂B₂CD68
MABCDEF1530
M(AA)₃12
M(AA)₂B₂23
M(AA)₂BC23
M(AA)B₂C₂34

Valence Bond Theory of Complexes

Valence bond theory (VBT), developed by Pauling, treats the metal–ligand bond as a coordinate covalent bond: each ligand donates a lone pair into an empty hybrid orbital on the metal.

The procedure

  1. Write the d configuration of the metal ion.
  2. Decide whether the ligands force pairing (strong ligands such as CN⁻, CO, often NH₃ with Co(III)) or not (F⁻, H₂O with most M²⁺). VBT itself cannot predict this; it is decided from the measured magnetic moment.
  3. Count the empty orbitals and hybridise to the required geometry.
HybridisationGeometryOrbitals used
splinears, \( p_z \)
sp³tetrahedrals, \( p_x, p_y, p_z \)
dsp²square planar\( d_{x^2-y^2} \), s, \( p_x, p_y \)
dsp³ / sp³dTBP\( d_{z^2} \), s, p
d²sp³ (inner orbital)octahedral\( (n-1)d_{x^2-y^2}, (n-1)d_{z^2} \), ns, np
sp³d² (outer orbital)octahedralns, np, \( nd_{x^2-y^2}, nd_{z^2} \)

Inner- and outer-orbital complexes

ComplexMetal ionPairing?HybridUnpaired e⁻Magnetism
[Co(NH₃)₆]³⁺Co³⁺ \( d^6 \)yesd²sp³ (inner)0diamagnetic
[CoF₆]³⁻Co³⁺ \( d^6 \)nosp³d² (outer)4paramagnetic
[Fe(CN)₆]⁴⁻Fe²⁺ \( d^6 \)yesd²sp³0diamagnetic
[Fe(CN)₆]³⁻Fe³⁺ \( d^5 \)yesd²sp³1paramagnetic
[FeF₆]³⁻Fe³⁺ \( d^5 \)nosp³d²5paramagnetic
[Ni(NH₃)₆]²⁺Ni²⁺ \( d^8 \)(cannot free two 3d)sp³d²2paramagnetic
[Ni(CN)₄]²⁻Ni²⁺ \( d^8 \)yesdsp²0diamagnetic, square planar
[NiCl₄]²⁻Ni²⁺ \( d^8 \)nosp³2paramagnetic, tetrahedral
Ni(CO)₄Ni⁰ \( d^{10} \) (after 4s → 3d)yessp³0diamagnetic, tetrahedral

The effective atomic number (EAN) rule

Sidgwick’s rule: a complex is especially stable when the metal’s electrons plus the electrons donated by the ligands equal the atomic number of the next noble gas.

  • [Fe(CN)₆]⁴⁻: Fe²⁺ has 24 electrons; six CN⁻ donate 12; EAN = 36 (Kr).
  • [Co(NH₃)₆]³⁺: Co³⁺ has 24; + 12 = 36.
  • Ni(CO)₄: 28 + 8 = 36; Fe(CO)₅: 26 + 10 = 36; Cr(CO)₆: 24 + 12 = 36.

The rule works well for carbonyls and other organometallics (as the 18-electron rule) and badly for Werner complexes: [Fe(CN)₆]³⁻ (EAN 35) and [Ni(NH₃)₆]²⁺ (EAN 38) are perfectly stable.

Where VBT fails

  1. No colour, no spectra. VBT has no excited states to explain d–d bands.
  2. Spin state is input, not output. It cannot predict whether [CoF₆]³⁻ is high spin; it only rationalises a measured moment.
  3. Magnetism is only “number of unpaired electrons”. It cannot explain orbital contributions (for example [Fe(CN)₆]³⁻ shows a moment above 1.73 BM) or temperature dependence.
  4. [Cu(NH₃)₄]²⁺ problem. Square planar Cu(II), \( d^9 \), as dsp² would need one electron promoted to a 4p orbital. That electron should be easily lost, making Cu(III) easy to reach. It is not.
  5. No energetics. It cannot explain the double-humped hydration enthalpies, the Irving–Williams order or the distortions of Cu(II) and high-spin Cr(II). Crystal field theory can: see Crystal Field, Ligand Field and MO Theory.

Memory Tricks

Don’t Confuse

ThisvsThat
Ionisation isomers: a ligand swaps with a counter-ionCoordination isomers: ligands swap between two complex ions
Linkage isomers: same ligand, different donor atomLigand isomers: the ligand itself has isomers (1,2- vs 1,3-diaminopropane)
Geometrical isomers (diastereomers, different properties)Enantiomers (same properties except optical rotation and reaction with chiral reagents)
Thermodynamic stability (β, the chelate effect)Kinetic lability (rate of substitution; see Reaction Mechanisms)
Inner-orbital d²sp³ = low spinOuter-orbital sp³d² = high spin

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. How many moles of AgCl precipitate immediately when 1 mol of [Co(NH₃)₄Cl₂]Cl reacts with excess AgNO₃?
  2. Name the type of isomerism shown by [Co(NH₃)₅(NO₂)]Cl₂ and [Co(NH₃)₅(ONO)]Cl₂.
  3. What hybridisation does VBT assign to [Ni(CN)₄]²⁻?
Answers
  1. 1 mol. Only the chloride outside the bracket is ionic.
  2. Linkage isomerism. NO₂⁻ binds through N (nitro) or O (nitrito).
  3. dsp², square planar, diamagnetic.

Level 2: Part B Style

Practice Q1. The total number of stereoisomers (including enantiomers) of [Co(NH₃)₃Cl(Br)(I)] is:

(a) 3 (b) 4 (c) 5 (d) 6

Answer: (c) 5

This is MA₃BCD. The three A ligands are fac or mer.

  • fac: B, C and D occupy the opposite face; the three are mutually cis, and the arrangement B, C, D around the face can be clockwise or anticlockwise: one chiral pair (2 stereoisomers).
  • mer: one of B, C, D sits trans to an A, the other two are trans to each other. Three choices of which ligand is trans to A, all achiral: 3 isomers.

Total geometrical isomers 4; stereoisomers 2 + 3 = 5.

Practice Q2. Which complex is chiral?

(a) trans-[Co(en)₂Cl₂]⁺ (b) [Pt(en)Cl₂] (c) cis-[Cr(ox)₂(H₂O)₂]⁻ (d) [Zn(NH₃)₂Cl₂]

Answer: (c)

cis-[M(AA)₂B₂] lacks any mirror plane or inversion centre. (a) has a mirror plane. (b) is square planar, and the molecular plane is a mirror plane. (d) is tetrahedral with only two kinds of ligand, MA₂B₂, which always has a mirror plane.

Practice Q3. Which pair contains one inner-orbital and one outer-orbital complex, according to valence bond theory?

(a) [Fe(CN)₆]³⁻ and [Fe(CN)₆]⁴⁻ (b) [Co(NH₃)₆]³⁺ and [CoF₆]³⁻ (c) [Ni(NH₃)₆]²⁺ and [Ni(H₂O)₆]²⁺ (d) [FeF₆]³⁻ and [Fe(H₂O)₆]³⁺

Answer: (b)

[Co(NH₃)₆]³⁺ is diamagnetic, d²sp³ (inner); [CoF₆]³⁻ has four unpaired electrons, sp³d² (outer). In (a) both are inner orbital; in (c) and (d) both are outer orbital (Ni(II) octahedral always is).

Practice Q4. A compound has the empirical formula CrCl₃·6H₂O. A solution containing 0.01 mol of it gives 0.02 mol of AgCl immediately with excess AgNO₃. Its formula is:

(a) [Cr(H₂O)₆]Cl₃ (b) [Cr(H₂O)₅Cl]Cl₂·H₂O (c) [Cr(H₂O)₄Cl₂]Cl·2H₂O (d) [Cr(H₂O)₃Cl₃]·3H₂O

Answer: (b)

0.02/0.01 = 2 free chlorides per formula unit. Cr(III) is six-coordinate: five water molecules and one chloride inside; the sixth water is lattice water. This is the blue-green hydrate isomer.

Level 3: Part C Style

Practice Q5. For the complex [Co(en)(NH₃)₂Cl₂]⁺, the number of geometrical isomers and the total number of stereoisomers are:

(a) 2 and 3 (b) 3 and 4 (c) 3 and 3 (d) 4 and 6

Answer: (b)

This is M(AA)B₂C₂. The chelate occupies two cis positions.

  1. NH₃ trans to NH₃: both Cl are cis to each other, each trans to an en nitrogen. The plane containing Co, the two en nitrogens and the two Cl is a mirror plane (it reflects one NH₃ onto the other): achiral.
  2. Cl trans to Cl: the two NH₃ are each trans to an en nitrogen; achiral.
  3. Both pairs cis: one NH₃ trans to en N, the other trans to Cl; one Cl trans to en N, the other trans to NH₃. No mirror plane: a chiral pair.

Geometrical isomers: 3; stereoisomers 1 + 1 + 2 = 4.

Practice Q6. Consider the statements:

  1. [NiCl₄]²⁻ is tetrahedral and has two unpaired electrons.
  2. All octahedral Ni(II) complexes are paramagnetic.
  3. The EAN of iron in [Fe(CN)₆]³⁻ is 36.
  4. [Pt(NH₃)₂Cl₂] can exist as two geometrical isomers but neither is optically active.

Which are correct?

(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (a)
  1. Correct. Weak-field Cl⁻, \( d^8 \), sp³ in VBT.
  2. Correct. Octahedral \( d^8 \) always has \( t_{2g}^6 e_g^2 \): two unpaired electrons.
  3. Wrong. Fe³⁺ has 23 electrons; + 12 = 35. The ferrocyanide ion [Fe(CN)₆]⁴⁻ has 36.
  4. Correct. Square planar cis and trans; both have the molecular plane as a mirror plane.

Practice Q7. A pale violet complex of empirical formula CoBr(SO₄)·5NH₃ gives a white precipitate with BaCl₂ solution but none with AgNO₃. A red isomer gives a pale yellow precipitate with AgNO₃ but none with BaCl₂. Identify the two compounds and the isomerism. Which one would show the larger molar conductivity in water, assuming complete dissociation?

Answer
  • Violet: sulfate is free, bromide coordinated: [Co(NH₃)₅Br]SO₄.
  • Red: bromide free (AgBr is pale yellow), sulfate coordinated: [Co(NH₃)₅(SO₄)]Br.
  • These are ionisation isomers.

Both release two ions per formula unit, so the number of ions does not separate them. [Co(NH₃)₅Br]SO₄ releases a 2+ cation and a 2− anion; [Co(NH₃)₅(SO₄)]Br releases a 1+ cation and a 1− anion. Ions of higher charge carry more current per formula unit, so the violet sulfate salt has the larger molar conductivity. (Conductivity ranges for each electrolyte type are taught as approximate bands; use them only to compare charge types, not to fix exact values.)

Quick Revision Table

IdeaFact
Transition elementincomplete d subshell in atom or common ion; Zn, Cd, Hg excluded
Max oxidation state (3d)group number up to Mn (+7); Fe +6 (ferrate) only
Down a grouphigh oxidation states more stable (W(VI) stable, Cr(VI) oxidising; RuO₄, OsO₄)
Wernerprimary valence = oxidation state; secondary = coordination number
Chelate effectentropy-driven; [Ni(en)₃]²⁺ about 10 orders of magnitude more stable than [Ni(NH₃)₆]²⁺
Square planar\( d^8 \): Pd(II), Pt(II), Au(III) always; Ni(II) with CN⁻
Isomer countsMA₄B₂ 2; MA₃B₃ 2; MA₂B₂C₂ 5 (6); MA₃BCD 4 (5); MABCDEF 15 (30)
Chiral[M(AA)₃], cis-[M(AA)₂B₂]; never trans, never square planar (achiral ligands)
VBT inner orbitald²sp³, low spin: [Co(NH₃)₆]³⁺, [Fe(CN)₆]⁴⁻
VBT outer orbitalsp³d², high spin: [CoF₆]³⁻, [FeF₆]³⁻, all octahedral Ni(II)
EANFe(CN)₆⁴⁻, Co(NH₃)₆³⁺, Ni(CO)₄ = 36
VBT failscolour, spin-state prediction, orbital moments, Cu(II) square planar, energetics

Key Takeaways

What’s Next