Applied Geology
CSIR NET Earth Sciences Part C geology: remote sensing and GIS, engineering geology, mineral exploration and hydrogeology, with numericals and practice.
- 4
- Topics
- 105
- Min read
- 01 Remote Sensing, GIS, Photogrammetry and GPS in GeologyStart here CSIR NET Earth Sciences Part C geology: geological remote sensing, band ratios, photogeology, photogrammetry, GIS overlay, DEMs and GPS positioning.
- 02 Engineering Geology: Dams, Tunnels, Landslides and Seismic Design CSIR NET Earth Sciences Part C geology: site investigation, RQD, RMR and Q, dam and tunnel geology, slope stability analysis and seismic design.
- 03 Mineral Exploration: Methods, Sampling and Evaluation CSIR NET Earth Sciences Part C geology: geological, geophysical, geochemical and geobotanical exploration, sampling and ore reserve evaluation.
- 04 Hydrogeology: Darcy's Law, Aquifers, Groundwater Exploration and Pollution CSIR NET Earth Sciences Part C geology: Darcy's law, aquifer properties, pumping tests, resistivity exploration, contaminant transport, India's aquifers.
- Applied Geology Short Notes Revise The whole chapter on one page.
Chapter Overview
Applied Geology is the Part C geology unit where geology meets engineering, industry and water supply. It asks what a geologist does with maps, satellites, drill cores and geophysical instruments: locate rocks and structures from images and position them by satellite; judge whether rock can carry a dam or a tunnel and whether a slope will stand in an earthquake; find and value an ore body; and find, measure and protect groundwater.
It is the most numerical of the geology units. Nearly every topic has a formula that turns field data into a decision: photo scale and parallax heights, RQD and the Q-system, factors of safety, apparent resistivity, gravity half-widths, geochemical thresholds, length-weighted grades, variograms, Theis and Cooper–Jacob analysis, retardation factors and stage of groundwater extraction.
What You’ll Learn
By the end of this chapter you will be able to:
- Map alteration minerals with band ratios, read structure from drainage and lineaments, and compute photo scale, relief displacement and parallax heights
- Build raster and vector GIS layers, run weighted overlays and convert GPS ellipsoidal heights to orthometric heights
- Classify rock masses with RQD, RMR and Q; judge dam and tunnel sites; run kinematic and limit-equilibrium slope checks; apply IS 1893 coefficients and liquefaction checks
- Choose geological, geophysical, geochemical and geobotanical methods for a target and interpret their data
- Composite assays, estimate tonnage and metal, compute variograms, cut-off grades and NPV
- Apply Darcy’s law to layered aquifers, analyse pumping tests, interpret resistivity soundings and model contaminant transport
- Describe India’s groundwater provinces, geogenic contamination and the categories of groundwater extraction
Prerequisites
- The Part B background: Elements of Remote Sensing, Hydrological Cycle, Water Resources and Management, Mineral Resources: Exploitation and Conservation and Natural Hazards
- Structural geology and earthquakes from Interior of the Earth, Deformation and Tectonics
- Logarithms, weighted averages and percentages from Numerical Ability
Learning Path
The topics follow the order of the official syllabus lines. Remote sensing and GIS come first because every later topic uses them.
graph TD
A[1. Remote Sensing, GIS, Photogrammetry and GPS] --> B[2. Engineering Geology: Dams, Tunnels, Landslides, Seismic Design]
A --> C[3. Mineral Exploration: Methods, Sampling and Evaluation]
A --> D[4. Hydrogeology: Darcy's Law, Aquifers, Exploration and Pollution]
C -->|resistivity methods| D
B -->|seepage and pore pressure| D
B --> E[Quick Revision]
C --> E
D --> ETopics in This Chapter
| Topic | What it covers | Time |
|---|---|---|
| Remote Sensing, GIS, Photogrammetry and GPS in Geology | spectral features of minerals, band ratios, ASTER and hyperspectral data, thermal inertia, radar and LiDAR, photogeology, drainage patterns, lineaments, photo scale, overlap and air base, relief displacement, parallax heights, raster and vector GIS, datums and UTM, weighted overlay, GPS ranging, error sources, DGPS and RTK, ellipsoidal and orthometric heights | 35 min |
| Engineering Geology: Dams, Tunnels, Landslides and Seismic Design | site investigation, Lugeon test, weathering grades, RQD, RMR, Q-system, dam types and foundation geology, grouting, uplift and sliding, reservoir problems and induced seismicity, tunnel geology, squeezing and rock burst, NATM, kinematic slope analysis, planar factor of safety, site period, liquefaction, IS 1893 | 40 min |
| Mineral Exploration: Methods, Sampling and Evaluation | exploration stages and UNFC, guides to ore, indicator minerals, gravity, magnetic, resistivity, SP, IP, EM, radiometric and seismic methods, dispersion haloes, pathfinders, threshold and dilution, geobotany and biogeochemistry, sampling types and error, QA/QC, composite grade, tonnage, reserve methods, variograms and kriging, resource classification, cut-off grade, NPV | 40 min |
| Hydrogeology: Darcy’s Law, Aquifers, Groundwater Exploration and Pollution | hydraulic head, Darcy’s law and its limits, layered aquifers, storage, flow equation and flow nets, aquifers in different rocks, Thiem, Dupuit, Theis and Cooper–Jacob, boundaries, VES and Archie’s law, contaminant transport and retardation, NAPLs, arsenic and fluoride, DRASTIC, remediation, Indian groundwater provinces and stage of extraction | 40 min |
| Quick Revision | every formula, value and trap on one page | 15 min |
Official Syllabus Lines and Where They Are Covered
| Official topic line | Covered in |
|---|---|
| Remote sensing and GIS, photogrammetry, GPS | Remote Sensing, GIS, Photogrammetry and GPS in Geology, building on the Part B page Elements of Remote Sensing |
| Engineering geology: dams, tunnels, landslides, seismic design | Engineering Geology: Dams, Tunnels, Landslides and Seismic Design |
| Mineral exploration: geological, geophysical, geochemical, geobotanical methods; sampling and evaluation | Mineral Exploration: Methods, Sampling and Evaluation |
| Hydrogeology: Darcy’s law, aquifers, groundwater exploration and pollution, Indian groundwater regimes | Hydrogeology: Darcy’s Law, Aquifers, Groundwater Exploration and Pollution, building on the Part B page Hydrological Cycle, Water Resources and Management |
How CSIR NET Asks It
Per the NTA information bulletin for December 2026, Earth Sciences Part C has 80 questions, of which 25 are to be attempted, at 4 marks each with −1.32 for a wrong answer (full table on the Earth Sciences overview). There is no official count of questions per unit. From the syllabus wording and the style of the subject, expect these kinds of question from this unit:
| Question type | Typical content | Where to practise |
|---|---|---|
| Method–target matching | band ratio to mineral; drainage pattern to structure; geophysical method to deposit; pathfinder to metal; indicator plant to element; VES curve type to layering | Level 1 and 2 on each page |
| One-step numerical | photo scale; relief displacement; RQD; Q; IS 1893 base shear; Wenner \( \rho_a \); sphere depth from half-width; geochemical threshold; \( K_h \) and \( K_v \); Cooper–Jacob \( T \); retardation factor | Level 2 |
| Multi-step or data | parallax heights; weighted overlay ranking; slope FS with water and earthquake loads; gravity dam sliding with uplift; liquefaction CSR; composite grade and tonnage; dilution; variogram and cut-off; pumping-test \( T \), \( S \) and boundaries; VES with Archie; DRASTIC and stage of extraction | Level 3 |
| Statement evaluation | “which of these are correct” on kinematic failure modes, resource classes, arsenic and fluoride geochemistry, Indian aquifer provinces | Level 3 |
Quick Reference
| Quantity | Formula or value |
|---|---|
| Photo scale | \( S = f/(H - h) \) |
| Relief displacement, parallax height | \( d = rh/H \); \( h = H\Delta p/(P + \Delta p) \) |
| GPS heights | \( h = H + N \); four satellites minimum |
| Q-system | \( Q = (\text{RQD}/J_n)(J_r/J_a)(J_w/\text{SRF}) \); \( RMR \approx 9\ln Q + 44 \) |
| Planar slope FS | \( [cA + (W\cos\psi - U - k_hW\sin\psi)\tan\phi]/(W\sin\psi + k_hW\cos\psi) \) |
| IS 1893 | \( A_h = (Z/2)(I/R)(S_a/g) \); Z = 0.10, 0.16, 0.24, 0.36 |
| Gravity sphere | \( x_{1/2} = 0.766z \) |
| Wenner | \( \rho_a = 2\pi a\Delta V/I \) |
| Composite grade | \( \sum l_ig_i/\sum l_i \) |
| Darcy | \( q = -K\,dh/dl \), \( v = q/n_e \) |
| Cooper–Jacob | \( T = 2.303Q/(4\pi\Delta s) \), \( S = 2.25Tt_0/r^2 \) |
| Retardation | \( R = 1 + (\rho_b/n)K_d \) |
Start Learning
Begin with the first topic: