Mineral Exploration: Methods, Sampling and Evaluation
CSIR NET Earth Sciences Part C geology: geological, geophysical, geochemical and geobotanical exploration, sampling and ore reserve evaluation.
- 29 min
On this page · 16 sections
- Prerequisites
- The Hook: From a Stream Sediment Anomaly to a Drill Core
- Stages of Exploration
- Geological Methods
- Geophysical Methods
- Geochemical Methods
- Geobotanical and Biogeochemical Methods
- Sampling
- Evaluation: Grade, Tonnage and Value
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- The Part B overview of resources, reserves, ore-forming processes and the exploration funnel: Mineral Resources: Exploitation and Conservation. This page goes deeper into each method and into the numbers.
- Gravity, the geomagnetic field and isostasy: Gravity, Geomagnetism, Heat Flow and Isostasy. Exploration gravity and magnetics use the same physics at a smaller scale.
- Band ratios, alteration mapping and lineaments: Remote Sensing, GIS, Photogrammetry and GPS.
- Eh–pH control on the mobility of metals in surface waters: Redox, Eh–pH Diagrams and the Geochemistry of Waters and Aerosols.
The Hook: From a Stream Sediment Anomaly to a Drill Core
Stages of Exploration
Exploration moves from large areas and low cost per square kilometre to small areas and high cost per metre drilled. The international UN Framework Classification (UNFC), which India uses to report mineral inventory, codes geological knowledge on its G axis in the same order:
| Stage | UNFC G axis | Area | Main work |
|---|---|---|---|
| Reconnaissance | G4 | regional (hundreds to thousands of km\(^2\)) | geological maps, remote sensing, airborne geophysics, regional stream-sediment geochemistry |
| Prospecting (preliminary exploration) | G3 | tens of km\(^2\) | detailed mapping, soil and rock geochemistry, ground geophysics, pits, trenches, scout drilling |
| General exploration | G2 | a few km\(^2\) | systematic drilling on a grid, sampling, preliminary resource estimate |
| Detailed exploration | G1 | the deposit | close-spaced drilling, bulk sampling, metallurgical tests, reserve estimate for a mine plan |
graph TD
A[Reconnaissance: maps, satellite data, airborne magnetics and radiometrics, stream sediments] --> B[Target areas]
B --> C[Prospecting: soil grids, ground geophysics, trenches]
C --> D[Drill targets]
D --> E[General exploration: grid drilling, assays]
E --> F[Resource estimate]
F --> G[Detailed exploration: infill drilling, metallurgy]
G --> H[Reserve estimate and feasibility]A mineral occurrence becomes a prospect when it is worth further work, and a deposit once tonnage and grade have been estimated. An ore body is the part of a deposit that can be mined at a profit.
Geological Methods
Geology decides where all the other methods are applied. The geologist looks for guides to ore:
| Guide | Examples |
|---|---|
| Physiographic | resistant ridges of silicified or quartz-veined rock; depressions over easily weathered sulphide zones; circular depressions over kimberlite pipes |
| Lithological and stratigraphic | chromite in ultramafic rocks; banded iron formation in greenstone belts; Zn–Pb in carbonate or black-shale horizons; uranium in sandstones near unconformities |
| Structural | gold in shear zones and fold hinges; veins along faults; ore shoots at fault intersections or bends |
| Mineralogical (alteration) | porphyry Cu zoning: potassic core, phyllic (quartz–sericite–pyrite), argillic and propylitic (chlorite–epidote–calcite) outward; silicification and adularia in epithermal veins; tourmalinisation near Sn–W |
| Oxidation products | gossan (“iron hat”) of limonite, goethite and jarosite over sulphides; boxwork (cellular limonite left where sulphides dissolved; its texture hints at the original sulphide); green and blue Cu carbonates (malachite, azurite) |
| Ancient workings | old pits, slag heaps and place names; many Indian copper, zinc and gold districts carry traces of ancient mining |
Mineral and boulder tracing
- Float and boulder tracing: mineralised blocks found downslope or downstream are traced back to their source.
- Heavy-mineral concentrates: panning stream gravels concentrates dense, resistant minerals. Gold, cassiterite, wolframite and scheelite point to their own deposits; kimberlite indicator minerals (pyrope garnet, chrome diopside, picroilmenite, chromite) point to a pipe upstream. Their abundance falls with distance, and grain shape (angular versus rounded) shows how far they have travelled.
Geophysical Methods
Geophysics detects contrasts in physical properties. The method is chosen to match the property that distinguishes the target from its host.
| Method | Property | Targets | Notes |
|---|---|---|---|
| Gravity | density | chromite pods, massive sulphides, barite; also basin and bedrock geometry | small anomalies (often well under 1 mGal for ore bodies); needs precise elevations |
| Magnetic | susceptibility, remanence | magnetite ores and BIF, kimberlite pipes, mafic–ultramafic hosts, dykes; alteration that destroys magnetite gives lows | fast and cheap from the air; dipolar anomalies depend on latitude |
| Electrical resistivity | resistivity | massive sulphides, graphite (conductive); quartz veins (resistive); overburden thickness | Wenner and Schlumberger arrays; electrical imaging |
| Self-potential (SP) | natural potentials | sulphide and graphite bodies crossing the water table | cheapest; negative anomalies of tens to hundreds of mV |
| Induced polarisation (IP) | chargeability | disseminated sulphides (porphyry Cu, disseminated Au–sulphide) | the most effective method for a few per cent of scattered sulphide grains |
| Electromagnetic (EM) | conductivity | massive sulphides, graphite; airborne EM for mapping conductors | VLF-EM uses military radio transmitters (15–30 kHz) |
| Radiometric (gamma-ray spectrometry) | K, U, Th | uranium, thorium, K-alteration, lithological mapping | detects the top few tens of centimetres only |
| Seismic | elastic velocity, impedance | coal seams, placers, overburden thickness; deep structure | routine for petroleum; limited but growing for hard-rock minerals |
Gravity
The observed gravity is reduced to the Bouguer anomaly by removing the reference (normal) gravity of the ellipsoid and correcting for elevation and topography:
$$\Delta g_B = g_{obs} - g_{normal} + 0.3086\,h - 0.04193\,\rho\,h + \text{terrain correction}$$(\( h \) in metres, \( \rho \) in g cm\(^{-3}\), result in mGal; the free-air term is 0.3086 mGal m\(^{-1}\) and the Bouguer slab term is \( 2\pi G\rho h \), 0.1119 mGal m\(^{-1}\) for \( \rho = 2.67 \)). In exploration the long-wavelength regional field (deep crustal structure) is subtracted to leave the residual anomaly of near-surface bodies.
Buried sphere (a compact ore pod) of radius \( R \), density contrast \( \Delta\rho \), centre at depth \( z \): its excess mass \( M = \tfrac{4}{3}\pi R^3\Delta\rho \) acts like a point mass:
$$\boxed{\Delta g(x) = \frac{GMz}{(x^2 + z^2)^{3/2}}} \qquad \Delta g_{max} = \frac{GM}{z^2} \qquad \boxed{x_{1/2} = 0.766\,z}$$where \( x_{1/2} \) is the horizontal distance from the peak at which the anomaly falls to half its maximum. For a horizontal cylinder (a long, pipe-like or ridge-like body) \( x_{1/2} = z \). The half-width therefore gives the depth to the centre without knowing the density: a sphere with a half-width of 230 m lies about \( 230/0.766 \approx 300 \) m deep.
Worked size: a massive sulphide sphere of radius 100 m, \( \Delta\rho = 1{,}000 \) kg m\(^{-3}\), centre at 200 m gives \( \Delta g_{max} = 6.674\times 10^{-11}\times 4.19\times 10^{9}/200^2 \approx 7.0\times 10^{-6} \) m s\(^{-2}\) \( = 0.70 \) mGal, with a half-width of 153 m. A sub-milligal target is why exploration gravimeters must resolve hundredths of a milligal.
Gauss’s theorem gives the total excess mass from the anomaly integrated over the surface, whatever the shape: \( M = \frac{1}{2\pi G}\iint \Delta g\,dA \). This is the basis of tonnage estimates from gravity alone.
Magnetic
- Earth’s field is about 25,000–65,000 nT. A body with susceptibility \( k \) acquires induced magnetisation \( kF \) and may also carry remanence; the Koenigsberger ratio \( Q = J_r/(kF) \) compares the two.
- Magnetite dominates the susceptibility of rocks, so magnetics maps magnetite-bearing units: BIF and magnetite ores, mafic dykes, ultramafic rocks, many kimberlites. Hydrothermal alteration that turns magnetite into pyrite or haematite produces magnetic lows, which are themselves targets.
- Corrections: diurnal variation (base-station magnetometer), removal of the International Geomagnetic Reference Field (IGRF).
- Anomaly shape depends on the inclination of the field. At high latitude an induced anomaly is a high over the body; near the magnetic equator it becomes a low over the body flanked by highs. India lies at low to moderate inclinations, so reduction to the pole (or the analytic signal, which is independent of inclination) is used to place anomalies over their sources, and is least stable at the lowest latitudes.
Electrical methods
Resistivity. Current \( I \) is driven between electrodes A and B; the potential difference \( \Delta V \) is read between M and N. The apparent resistivity is \( \rho_a = K\,\Delta V/I \), with a geometric factor \( K \):
$$\boxed{\text{Wenner (AM = MN = NB = } a\text{):}\quad \rho_a = 2\pi a\frac{\Delta V}{I}} \qquad \text{Schlumberger:}\quad \rho_a = \frac{\pi (L^2 - l^2)}{2l}\,\frac{\Delta V}{I}$$with \( L = \) AB/2 and \( l = \) MN/2. Expanding the array (a sounding) probes deeper; moving a fixed array along a line (profiling) maps lateral changes; doing both with many electrodes gives a 2D or 3D electrical resistivity tomography section. With \( a = 20 \) m, \( I = 0.5 \) A and \( \Delta V = 0.12 \) V, a Wenner reading is \( 2\pi(20)(0.24) = 30.2 \) Ω m.
Self-potential. A sulphide body that straddles the water table acts as a natural battery: oxidation above and reduction below drive electrons through the conductive body and ions through the pore water. The result is a negative SP anomaly centred over the top of the body. Graphite and some water movements (streaming potential) also produce SP anomalies.
Induced polarisation. After the current is switched off, the voltage does not drop instantly to zero; it decays over a second or so because charge has built up at metallic-grain–electrolyte interfaces (electrode polarisation) and in clays (membrane polarisation).
| Domain | Measure |
|---|---|
| Time domain | chargeability \( M = \frac{1}{V_p}\int V(t)\,dt \) over a window (ms), or the ratio of secondary to primary voltage (mV V\(^{-1}\)) |
| Frequency domain | frequency effect \( FE = (\rho_{dc} - \rho_{ac})/\rho_{ac} \), percent frequency effect PFE = 100 FE; apparent resistivity falls as frequency rises |
With \( \rho_{dc} = 200 \) and \( \rho_{ac} = 180 \) Ω m, PFE \( = 100\times 20/180 \approx 11\% \). Disseminated sulphides at a few per cent by volume barely change the bulk resistivity (the grains are not connected) but give a large IP effect, so IP is the standard method for porphyry copper. Graphite and clay-rich rocks are the usual “false” IP anomalies.
Electromagnetic methods
A transmitter coil (or a long wire) creates a primary alternating field; a conductor in the ground carries induced eddy currents whose secondary field is measured at a receiver. Ground systems include horizontal-loop (moving source and receiver) and fixed-loop methods; time-domain EM measures the decay of secondary fields after the transmitter is switched off and sees deeper, more conductive targets; airborne EM maps conductors over large areas; VLF-EM uses distant radio transmitters and is cheap but shallow. Massive sulphides and graphitic schists are the classic conductors, and telling them apart needs geology or geochemistry.
Radiometric methods
Gamma-ray spectrometers count photons in energy windows for three natural emitters: K (\( ^{40}\)K, 1.46 MeV), U (via its daughter \( ^{214}\)Bi, 1.76 MeV, reported as equivalent uranium, eU) and Th (via \( ^{208}\)Tl, 2.61 MeV, eTh). Uranium exploration also uses radon in soil gas and water (emanometry). Because gamma rays come from the top few tens of centimetres, radiometrics maps surface geology and K-alteration rather than deep bodies, and disequilibrium in the uranium decay chain can make eU differ from chemical U.
Matching method to deposit
| Deposit | First-choice methods |
|---|---|
| Porphyry Cu–Mo | IP and resistivity; magnetics (magnetite-destructive alteration lows, potassic magnetite highs); alteration mapping by remote sensing |
| Volcanogenic massive sulphide (Cu–Zn–Pb) | EM and resistivity (conductor), gravity (dense), SP |
| Chromite in ultramafics | gravity (chromite is much denser than serpentinite) |
| Banded iron formation, magnetite ores | magnetics, gravity |
| Kimberlite pipes | magnetics (circular anomalies), EM and gravity (weathered pipes often conductive and less dense), indicator minerals |
| Uranium | radiometrics, radon; resistivity and EM for conductive graphitic faults in unconformity settings |
| Placers, coal | seismic refraction and reflection, resistivity, drilling |
Geochemical Methods
Dispersion and mobility
Ore-forming processes leave a primary dispersion halo of elevated element concentrations in the host rock (formed with the ore, often wider than the ore itself). Weathering and transport then spread elements into soils, sediments, waters, gases and plants as secondary dispersion haloes and trains.
| Pattern | Formed by |
|---|---|
| Clastic (mechanical) | ore and gossan fragments carried by gravity, streams, wind or ice |
| Hydromorphic | metals dissolved in water and reprecipitated where Eh, pH or adsorption changes (seepage anomalies at breaks in slope, swamps) |
| Biogenic | metals taken up by plants and returned to the soil in leaf litter |
| Gaseous | Hg vapour, radon, CO\(_2\), SO\(_2\), sulphur gases over sulphide bodies |
Mobility in the surface environment depends on Eh and pH. Zn, Cu and Ni are mobile in acid, oxidising waters; Mo, U, V and Se are mobile in oxidising, neutral to alkaline waters (as oxyanions or complexes); Fe and Mn are mobile only under reducing conditions; resistate minerals carrying Sn, Cr, Au, Ti, Zr and the PGE move only mechanically. A geochemical barrier (a sudden Eh or pH change) fixes mobile elements and creates anomalies away from the source.
Pathfinder elements
A pathfinder is an element associated with a deposit that is easier to detect or more widely dispersed than the target metal.
| Target | Pathfinders |
|---|---|
| Gold (orogenic, epithermal) | As, Sb, Bi, Te, W; Hg in epithermal systems |
| Porphyry Cu | Mo, Cu, Au in the core; Zn, Pb, Ag, Mn in an outer halo |
| Massive sulphides (VMS, SEDEX) | Zn, Pb, Ba, Mn, Tl |
| Uranium | Rn, He |
| Ni–Cu sulphides | Cu, Co, PGE, S |
| Sn–W | B, F, Li |
Sample media
| Medium | Practice |
|---|---|
| Stream sediments | the main reconnaissance medium; the fine fraction (commonly the −80 mesh, about < 177 μm) is analysed; one sample represents the whole catchment upstream |
| Soils | grids or traverses across targets; the B horizon (where Fe–Mn oxides and clays adsorb metals) is usual; in deep lateritic profiles lag, ferricrete or the C horizon may be better |
| Rocks | chip and channel samples of outcrop; lithogeochemistry maps primary haloes and alteration indices |
| Waters | stream and groundwater for mobile elements (U, Mo, Zn, SO\(_4^{2-}\)) |
| Heavy-mineral concentrates | Au, Sn, W, kimberlite indicators |
| Gases | Hg, Rn, CO\(_2\) |
| Vegetation | biogeochemistry (below) |
Background, threshold and anomaly
- Background: the normal range of an element in unmineralised material of a given type.
- Threshold: the upper limit of background; values above it are anomalous. A common working rule is \( \text{threshold} = \bar{x} + 2s \). Trace-element data are usually lognormal, so the rule is applied to logarithms: if the geometric mean is 20 ppm and the standard deviation of \( \log_{10} \) values is 0.2, then threshold \( = 10^{\log 20 + 0.4} \approx 50 \) ppm.
- Contrast: anomaly peak divided by background. High-contrast, coherent anomalies (several adjacent samples) are worth more than a single high value.
- Cumulative probability plots separate overlapping background and anomalous populations as breaks in slope.
Dilution in a drainage
A stream sediment sample mixes material from its entire catchment. Hawkes’ relation balances metal from an anomalous source area \( A_a \) (metal content \( M_a \)) with background areas (\( M_b \)):
$$\boxed{(M_m - M_b)\,A_m = (M_a - M_b)\,A_a}$$where \( M_m \) is the metal content of the sample and \( A_m \) the catchment area above it. Contrast decays downstream roughly in proportion to \( 1/A_m \), so reconnaissance sample density must match the size of target expected. With \( M_m = 120 \) ppm, \( M_b = 40 \) ppm, \( A_m = 10 \) km\(^2\) and a source soil of 1,000 ppm, the exposed anomalous area is \( 80\times 10/960 \approx 0.83 \) km\(^2\).
Geobotanical and Biogeochemical Methods
Plants sample the soil and groundwater through their roots, sometimes from several metres down.
| Approach | What is observed |
|---|---|
| Geobotanical | the distribution and appearance of plants: indicator species and communities, absence of vegetation, and toxicity symptoms (chlorosis, dwarfing, gigantism, abnormal colours, malformed leaves or flowers) |
| Biogeochemical | the chemical analysis of plant tissue (usually ash of twigs, leaves or bark) for metals |
| Remote sensing of vegetation stress | a shift of the chlorophyll red edge (the steep rise in reflectance near 0.7 μm) to shorter wavelength in metal-stressed plants, detectable in hyperspectral data |
Indicator plants are of two kinds: universal indicators grow only on metal-rich soils wherever they occur; local indicators tolerate such soils in one region but grow elsewhere too. Classic examples from the exploration literature:
| Element | Indicator |
|---|---|
| Copper | Ocimum centrale (also known as Becium homblei), the “copper flower” of the central African Copperbelt; Viscaria alpina in Scandinavia |
| Zinc | the zinc violet, Viola calaminaria, on European calamine soils |
| Nickel | Alyssum species, many of them nickel hyperaccumulators on serpentine soils |
| Selenium and uranium | Astragalus species on the Colorado Plateau (selenium accompanies uranium in its sandstone ores) |
Barrier and non-barrier plants: some species stop taking up an element once tissue concentrations reach a limit (barrier), so their content says little about the soil; others keep absorbing it in proportion to the soil (non-barrier), and those are the useful sampling media for biogeochemistry. Deep-rooted trees in areas of thick transported cover can reveal mineralisation that soil sampling misses.
Sampling
A sample must represent the material it stands for. The commonest exploration samples:
| Sample | Method | Use |
|---|---|---|
| Grab | a piece picked from outcrop or a dump | quick indication only; biased towards visibly mineralised pieces |
| Chip | chips taken at regular intervals along a line or grid | outcrop and mine faces |
| Channel | a continuous groove of uniform width and depth cut across the ore body | the standard face and trench sample; true representation across the width |
| Bulk | tonnes of material from pits, trenches or adits | coarse gold, diamonds, metallurgical tests |
| Diamond drill core | the core is split (sawn in half), one half assayed, the other kept | grade, geology, density, geotechnical data |
| Reverse-circulation (RC) chips | cuttings brought up inside the drill string | cheaper than core; grade but less geology |
| Pit and trench | through overburden to bedrock | near-surface definition |
Sampling intervals respect geology: they break at contacts and are usually 1 m or so in core, and the true width of the intersection is \( \text{true width} = \text{intercept length}\times\cos(\text{angle between hole and the ore-body normal}) \).
Sampling error and sample reduction
A drill sample of tens of kilograms is reduced to a few hundred grams for analysis by repeated crushing, splitting (riffle splitter, rotary splitter, coning and quartering) and pulverising. The fundamental sampling error of Gy’s sampling theory depends on the mass taken and the size of the largest particles:
$$\sigma^2_{FE} = c\,l\,f\,g\,d^3\left(\frac{1}{M_S} - \frac{1}{M_L}\right)$$(\( d \) top particle size, \( M_S \) sample mass, \( M_L \) lot mass, and \( c, l, f, g \) factors for mineralogy, liberation, particle shape and size distribution). Because the error grows with \( d^3 \), crushing from 10 mm to 1 mm lets the same precision be reached with a thousandth of the mass. Always crush before splitting.
The nugget effect in coarse gold (a few large grains carrying most of the metal) makes small samples highly erratic; bulk samples, larger assay charges and screen fire assay reduce it. Salting (fraudulent addition of metal) and loss of fines or soft ore during drilling are other sources of bias.
Quality assurance and quality control (QA/QC): field and pulp duplicates (precision), blanks (contamination), certified reference materials (accuracy) and check assays at a second laboratory.
Evaluation: Grade, Tonnage and Value
Grade of an intersection
Assays from intervals of unequal length are length-weighted (and density-weighted where density varies):
$$\boxed{\bar{g} = \frac{\sum l_i g_i}{\sum l_i}}$$For 2.0 m at 1.2% Cu, 3.5 m at 2.4% and 1.5 m at 0.8%: \( \bar{g} = (2.4 + 8.4 + 1.2)/7.0 = 1.71\% \) Cu over 7.0 m. The arithmetic mean of the three assays (1.47%) is wrong.
Tonnage and metal content
$$\boxed{\text{Tonnage} = \text{volume}\times\text{bulk density}} \qquad \text{Metal} = \text{tonnage}\times\text{grade}$$Older practice used a tonnage factor (m\(^3\) per tonne, the inverse of density). A block of influence 2,500 m\(^2\) in area and 7.0 m thick, at 2.8 t m\(^{-3}\) and 1.71% Cu, holds \( 17{,}500\times 2.8 = 49{,}000 \) t of ore and \( 49{,}000\times 0.0171 \approx 840 \) t of copper.
Classical estimation methods
| Method | Idea |
|---|---|
| Polygon (area of influence) | each hole’s grade and thickness apply to a polygon around it (perpendicular bisectors to neighbours) |
| Triangle | grade and thickness averaged at the corners of triangles joining three holes |
| Cross-section | ore areas measured on parallel sections; volume between two sections \( = \frac{A_1 + A_2}{2}\times d \) (mean-area rule), or the prismoidal or frustum formula when areas differ greatly |
| Inverse distance weighting | block grade = weighted mean of nearby samples, weights \( \propto 1/d^p \) (often \( p = 2 \)) |
| Kriging | geostatistical weighting from the variogram (below) |
Sections 50 m apart with ore areas of 400 and 600 m\(^2\) enclose about \( 500\times 50 = 25{,}000 \) m\(^3\) by the mean-area rule.
Geostatistics
Matheron’s theory of regionalised variables treats grade as spatially correlated. The semivariogram measures how dissimilar samples become with separation \( h \):
$$\boxed{\gamma(h) = \frac{1}{2N(h)}\sum_{i=1}^{N(h)}\left[z(x_i) - z(x_i + h)\right]^2}$$| Feature | Meaning |
|---|---|
| Nugget \( C_0 \) | the value at (near) zero lag: sampling and assay error plus very short-range variation (high for coarse gold) |
| Sill | the plateau, approximately the sample variance |
| Range | the lag at which the sill is reached: the distance beyond which samples are uncorrelated (a guide to drill spacing) |
| Anisotropy | different ranges in different directions (for example along and across a shear zone) |
Grades of 2, 4, 5, 8 and 9 g t\(^{-1}\) at 10 m spacing give \( \gamma(10) = (4 + 1 + 9 + 1)/(2\times 4) = 1.875 \) and \( \gamma(20) = (9 + 16 + 16)/(2\times 3) = 6.83 \): dissimilarity grows with distance, as expected at short lags (five samples are only an illustration, not a usable variogram).
Kriging chooses weights that make the estimate unbiased and minimise the estimation variance (the “best linear unbiased estimator”), honours the variogram and declusters irregular data, and returns a kriging variance for each block, which supports resource classification.
Resource and reserve classification
| Scheme | Categories |
|---|---|
| CRIRSCO family (JORC and similar codes) | Mineral Resources: inferred, indicated, measured (increasing geological confidence). Applying modifying factors (mining, metallurgical, economic, marketing, legal, environmental, social) converts indicated resources to probable and measured resources to proved (or probable) Reserves |
| UNFC (used in India) | three axes: E economic viability, F feasibility, G geological knowledge, each coded 1 (best) to 3 or 4. The code is written E-F-G: 111 is a proved mineral reserve; 333 an inferred and 334 a reconnaissance mineral resource |
Economic evaluation
Cut-off grade: the lowest grade that pays for the cost of mining and processing it. A break-even cut-off is
$$\boxed{g_c = \frac{\text{cost per tonne of ore}}{\text{price per unit metal}\times\text{recovery}}}$$With a cost of ₹2,400 per tonne, copper at ₹7,50,000 per tonne of metal and 85% recovery: \( g_c = 2400/(750000\times 0.85) = 0.0038 \), that is 0.38% Cu. Raising the cut-off increases the average grade but decreases the tonnage; the grade–tonnage curve shows this trade-off.
Stripping ratio (waste : ore) sets the depth to which an open pit pays. Net present value
$$\boxed{NPV = -I_0 + \sum_{t=1}^{n}\frac{CF_t}{(1 + r)^t}}$$discounts future cash flows; the internal rate of return is the rate that makes NPV zero; the payback period is the time to recover the investment. An outlay of ₹100 crore with ₹30 crore a year for 5 years at 10% gives \( NPV = 30\times 3.791 - 100 \approx +13.7 \) crore and an IRR of about 15.2%.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Primary halo: formed with the ore in the host rock | Secondary halo or train: formed by weathering and transport | |
| Clastic dispersion: fragments moved mechanically | Hydromorphic dispersion: metals moved in solution | |
| Geobotanical: plant distribution and appearance | Biogeochemical: metal content of plant tissue | |
| Universal indicator plant: only on metal-rich soil | Local indicator: tolerant in one region only | |
| IP: disseminated sulphides, chargeability | Resistivity and EM: massive, connected conductors | |
| SP: natural potential, no source needed | Resistivity and IP: injected current | |
| Bouguer anomaly: corrected for elevation and slab | Free-air anomaly: corrected for elevation only | |
| Resource: reasonable prospects of eventual extraction | Reserve: economically mineable after modifying factors | |
| Grab sample: biased, indicative | Channel sample: representative across the width | |
| Nugget effect: short-range variance | Sill: total variance |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- Which geophysical method is the standard tool for disseminated sulphides in porphyry copper systems?
- What is the half-width-to-depth ratio for the gravity anomaly of a buried sphere?
- Distinguish a geobotanical survey from a biogeochemical survey in one line.
Answers
- Induced polarisation (IP).
- \( x_{1/2} = 0.766\,z \), so \( z \approx 1.3\,x_{1/2} \) (to the centre).
- Geobotany observes the distribution and appearance of plants (indicator species, toxicity symptoms); biogeochemistry chemically analyses plant tissue for metals.
Level 2: Part B Style
Practice Q1. A Wenner array with 20 m electrode spacing passes 0.5 A and records 0.12 V between the potential electrodes. The apparent resistivity is closest to:
(a) 4.8 Ω m (b) 15 Ω m (c) 30 Ω m (d) 60 Ω m
Answer: (c) 30 Ω m
\( \rho_a = 2\pi a\,\Delta V/I = 2\pi\times 20\times 0.12/0.5 = 30.2 \) Ω m. (b) drops the factor 2 (\( \pi a \)); (a) is \( a\,\Delta V/I \) without \( 2\pi \).
Practice Q2. A residual gravity anomaly over a chromite pod is circular in plan, with a peak of 0.35 mGal and a half-width of 230 m. The depth to the centre of the body is about:
(a) 176 m (b) 230 m (c) 300 m (d) 460 m
Answer: (c) 300 m
A circular anomaly suggests a sphere: \( z = x_{1/2}/0.766 = 230/0.766 = 300 \) m. (b) applies the horizontal-cylinder rule; (a) multiplies by 0.766 instead of dividing.
Practice Q3. Soil copper values in a survey area are lognormal with a geometric mean of 20 ppm and a standard deviation of the \( \log_{10} \) values of 0.2. Using mean plus two standard deviations, the anomaly threshold is about:
(a) 20.4 ppm (b) 28 ppm (c) 40 ppm (d) 50 ppm
Answer: (d) 50 ppm
\( \log_{10}20 = 1.301 \); threshold \( = 10^{1.301 + 0.4} = 10^{1.701} = 50.2 \) ppm, that is the geometric mean times \( 10^{0.4} \approx 2.51 \). (a) adds 0.4 ppm to the mean; (c) doubles the mean.
Practice Q4. Which pairing of target and exploration approach is incorrect?
(a) Kimberlite pipes: magnetic surveys and pyrope and chrome-diopside indicator minerals (b) Uranium in sandstones: gamma-ray spectrometry and radon emanometry (c) Gold in shear zones: As and Sb as pathfinders (d) Massive chromite pods: induced polarisation as the method of first choice
Answer: (d)
Chromite is an oxide with high density and is not a polarisable sulphide; gravity is the first choice for chromite pods in ultramafic hosts. The other three are standard pairings.
Level 3: Part C Style
Practice Q5. A drill hole crosses a vein-type copper zone. The assays are: 2.0 m at 1.2% Cu, 3.5 m at 2.4% Cu and 1.5 m at 0.8% Cu (densities equal). The zone is assigned an area of influence of 2,500 m\(^2\) in plan and the intersection is taken as the true thickness. The bulk density is 2.8 t m\(^{-3}\). Which statements are correct?
- The composite grade is about 1.71% Cu.
- The ore tonnage in the block is 49,000 t.
- The block contains about 840 t of copper metal.
- Using the simple average of the three assays would underestimate the metal content by more than 10%.
(a) 1 and 2 only (b) 1, 2 and 3 only (c) 1, 2, 3 and 4 (d) 2 and 4 only
Answer: (c) 1, 2, 3 and 4
- 1 true: \( (2.0\times 1.2 + 3.5\times 2.4 + 1.5\times 0.8)/7.0 = 12.0/7.0 = 1.714\% \).
- 2 true: \( 2{,}500\times 7.0\times 2.8 = 49{,}000 \) t.
- 3 true: \( 49{,}000\times 0.01714 = 840 \) t Cu.
- 4 true: simple mean \( = (1.2 + 2.4 + 0.8)/3 = 1.467\% \), giving 719 t, which is 14.4% lower than 840 t.
Practice Q6. In a stream-sediment survey, a sample at a point draining 10 km\(^2\) contains 120 ppm Zn. Regional background is 40 ppm. Soils over the suspected source contain about 1,000 ppm Zn. Which statements are correct?
- The exposed anomalous source area implied by Hawkes’ dilution relation is about 0.83 km\(^2\).
- A sample farther downstream, draining 40 km\(^2\) with no further anomalous input, would contain about 60 ppm Zn.
- At the downstream site the anomaly would still exceed a threshold of 70 ppm.
- Zinc, being mobile in acid oxidising water, may also form hydromorphic anomalies at seepage sites.
(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 4 only
- 1 true: \( A_a = (M_m - M_b)A_m/(M_a - M_b) = 80\times 10/960 = 0.833 \) km\(^2\).
- 2 true: \( M_m - 40 = (960\times 0.833)/40 = 20 \), so \( M_m = 60 \) ppm.
- 3 false: 60 ppm is below 70 ppm. Dilution has pushed the anomaly into the background range, which is why reconnaissance sampling density must match catchment size.
- 4 true: Zn is mobile under acid, oxidising conditions and reprecipitates (adsorbed on Fe–Mn oxides) where pH rises.
Practice Q7. Gold assays along a drive at 10 m spacing are 2, 4, 5, 8 and 9 g t\(^{-1}\). Copper ore costs ₹2,400 per tonne to mine and process in a nearby project, copper sells at ₹7,50,000 per tonne of metal, and recovery is 85%. Which statements are correct?
- The experimental semivariogram gives \( \gamma(10\ \text{m}) = 1.875 \) and \( \gamma(20\ \text{m}) \approx 6.83 \) (g t\(^{-1}\))\(^2\).
- The rise of \( \gamma \) from 10 m to 20 m shows that closer samples are more alike, although five samples are far too few for a reliable variogram.
- The break-even cut-off grade for the copper project is about 0.38% Cu.
- If recovery fell to 70%, the cut-off grade would fall.
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- 1 true: lag 10 m pairs: differences 2, 1, 3, 1; \( \gamma = (4 + 1 + 9 + 1)/(2\times 4) = 1.875 \). Lag 20 m pairs: 3, 4, 4; \( \gamma = (9 + 16 + 16)/(2\times 3) = 6.83 \).
- 2 true: nearer samples are more alike. Note that \( \gamma(20) = 6.83 \) is already close to the sample variance (about 6.6), so the data say nothing about the true range; a real variogram needs many more pairs.
- 3 true: \( g_c = 2400/(750{,}000\times 0.85) = 0.00376 = 0.38\% \).
- 4 false: lower recovery means less saleable metal per tonne, so the cut-off rises: \( 2400/(750{,}000\times 0.70) = 0.46\% \).
Practice Q8. A small mine needs ₹100 crore now and will return ₹30 crore a year for 5 years. Which statement is correct at a 10% discount rate?
(a) NPV is about +₹50 crore, because undiscounted returns are ₹150 crore (b) NPV is about +₹13.7 crore and the IRR is about 15% (c) NPV is negative because the payback period exceeds 3 years (d) NPV is about +₹13.7 crore and the IRR is below 10%
Answer: (b)
Annuity factor at 10% for 5 years \( = \sum_{t=1}^{5}1.1^{-t} = 3.791 \). NPV \( = 30\times 3.791 - 100 = 13.7 \) crore. NPV is positive at 10%, so IRR exceeds 10%; solving \( \sum 30/(1+r)^t = 100 \) gives \( r \approx 15.2\% \). (a) ignores discounting; (c) confuses payback (3.3 years) with NPV; (d) contradicts a positive NPV at 10%.
Quick Revision Table
| Idea | Fact or formula |
|---|---|
| Stages | reconnaissance (G4), prospecting (G3), general (G2), detailed (G1) |
| Guides to ore | physiographic, lithological, structural, alteration, gossan and boxwork, old workings |
| Porphyry alteration | potassic core, phyllic, argillic, propylitic outward |
| Kimberlite indicators | pyrope, chrome diopside, picroilmenite, chromite |
| Bouguer | \( g_{obs} - g_n + 0.3086h - 0.04193\rho h + TC \) mGal |
| Sphere | \( \Delta g = GMz/(x^2 + z^2)^{3/2} \); \( x_{1/2} = 0.766z \); cylinder \( x_{1/2} = z \) |
| Gauss | \( M = \frac{1}{2\pi G}\iint\Delta g\,dA \) |
| Magnetics | magnetite controls; IGRF and diurnal corrections; RTP at low latitude |
| Wenner | \( \rho_a = 2\pi a\Delta V/I \) |
| Schlumberger | \( \rho_a = \pi(L^2 - l^2)\Delta V/(2lI) \) |
| SP | negative over sulphide straddling water table |
| IP | chargeability; PFE \( = 100(\rho_{dc} - \rho_{ac})/\rho_{ac} \); disseminated sulphides |
| Radiometrics | K 1.46, Bi-214 (U) 1.76, Tl-208 (Th) 2.61 MeV |
| Pathfinders | As, Sb, Bi, Te for Au; Mo for porphyry; Rn, He for U; Hg epithermal |
| Threshold | mean + 2s (on logs) |
| Dilution | \( (M_m - M_b)A_m = (M_a - M_b)A_a \) |
| Geobotany | Cu: Ocimum centrale; Zn: Viola calaminaria; Ni: Alyssum; Se–U: Astragalus |
| Sampling | channel best; split core; error \( \propto d^3/M \); QA/QC: duplicates, blanks, CRMs |
| Grade | \( \sum l_ig_i/\sum l_i \) |
| Tonnage | volume × density; metal = tonnage × grade |
| Variogram | \( \gamma(h) = \frac{1}{2N}\sum[z(x) - z(x + h)]^2 \); nugget, sill, range |
| Classification | inferred, indicated, measured; probable, proved; UNFC E-F-G, 111 proved reserve |
| Cut-off | cost / (price × recovery) |
| NPV | \( -I_0 + \sum CF_t/(1 + r)^t \) |
Key Takeaways
What’s Next
- Hydrogeology: Darcy’s Law, Aquifers, Exploration and Pollution: the same resistivity methods find aquifers, and the same Eh–pH chemistry moves contaminants.
- Engineering Geology: Dams, Tunnels, Landslides and Seismic Design: core logging and RQD on the same drill cores.
- Mineral Concentration Processes and Rocks and Minerals of India: the Indian deposits these methods are applied to.
- Back to the Applied Geology overview.