Estuaries, Hydrothermal Vents, Anoxic Basins and HNLC Waters
CSIR NET Ocean Sciences: estuarine mixing diagrams, vent-fluid chemistry and end-members, euxinic basins and OMZs, and iron limitation in HNLC waters.
- 21 min
On this page · 13 sections
Prerequisites
- Composition of Seawater and Residence Times — constant proportions and conservative behaviour, the baseline these environments depart from.
- Ocean-Floor Morphology, Oceanic Crust and Hydrothermal Vents — the geological setting of vents; this page covers their chemistry.
- Redox, Eh–pH Diagrams and the Geochemistry of Waters — the redox ladder used for anoxic basins.
The Hook: Four Places Where the Rules Bend
How CSIR NET asks it. Part C gives property–salinity plots and asks whether a constituent is removed or added; gives vent-fluid analyses and asks for the end-member; asks which redox species appear in what order in an anoxic basin; and asks why nutrients go unused in HNLC regions and what iron-addition experiments showed.
Estuaries
Definition and physical types
An estuary is a semi-enclosed coastal body of water with a free connection to the open sea, within which seawater is measurably diluted by fresh water from land drainage (Pritchard’s definition). Chemically, it is a reactor with a strong gradient in salinity, ionic strength, pH and particle load.
| By origin | Example type |
|---|---|
| Drowned river valley (coastal plain) | Most estuaries of low-lying coasts |
| Fjord | Glacially overdeepened, often with a sill; deep water can turn anoxic |
| Bar-built | Behind barrier islands or spits |
| Tectonic | Formed by faulting or subsidence |
| By stratification | Character |
|---|---|
| Salt wedge | River flow dominates; sharp halocline; seawater wedge along the bottom |
| Partially mixed | Tides mix the two layers partly; two-layer flow with entrainment |
| Well mixed | Strong tides; salinity changes along the estuary but little with depth |
Indian estuaries such as the Hooghly or the Mandovi–Zuari system in Goa change character with the monsoon: high discharge in the wet season pushes them towards salt-wedge conditions, while in the dry season tides dominate and they become well mixed.
Mixing diagrams: the central tool
Salinity is conservative, so it serves as the mixing index. Plot a constituent \( C \) against salinity \( S \) for samples spanning river (\( S = 0 \)) to sea (\( S_{sw} \)):
$$C_{mix} = C_{river} + \left(C_{sea} - C_{river}\right)\frac{S}{S_{sw}}$$This straight line between the two end-members is the theoretical dilution line (TDL).
| Observed data | Interpretation |
|---|---|
| On the TDL | Conservative mixing (Na, Cl, often U, Li) |
| Below the TDL (concave-up curve) | Removal within the estuary (Fe flocculation, Si uptake by diatoms, phosphate adsorption) |
| Above the TDL (convex curve) | Addition (Ba and Ra desorbed from river particles, Mn from reducing sediments, nutrients from sewage or remineralisation) |
Quantifying removal: the effective end-member
If removal happens at low salinity, the data at higher salinity again fall on a straight line, now pointing to a lower apparent river concentration. Extrapolate that high-salinity tangent back to \( S = 0 \): the intercept is the effective river end-member \( C^{*}_{river} \). Then
$$\text{fraction removed} = \frac{C_{river} - C^{*}_{river}}{C_{river}}, \qquad \text{net flux to the sea} = Q\,C^{*}_{river}$$where \( Q \) is river discharge. If \( C^{*} > C_{river} \), there is net addition.
The method assumes a steady river end-member over the flushing time of the estuary. If the river concentration changed during that time, a curved plot can appear without any reaction. Part C likes this caveat.
Key estuarine processes
| Process | What happens | Constituents |
|---|---|---|
| Flocculation | Rising ionic strength collapses the electrical double layer on colloids; humic–Fe colloids aggregate and settle | Fe (most river dissolved Fe is removed at low salinity), humic acids, Al, some P |
| Desorption | Seawater cations (Mg\(^{2+}\), Ca\(^{2+}\), Na\(^+\)) exchange for adsorbed ions on river particles | Ba, Ra, some trace metals; NH\(_4^+\) |
| Phosphate buffering | P adsorbs to or desorbs from Fe-oxyhydroxide particles to hold dissolved P near a set level | PO\(_4^{3-}\) |
| Biological uptake | Phytoplankton blooms where turbidity falls | Si, N, P |
| Redox cycling | Reduction in sediments and turbidity maxima | Mn\(^{2+}\), Fe\(^{2+}\) released |
| Turbidity maximum | Particles trapped where river and estuarine flows converge | Enhanced adsorption, flocculation |
Because flocculation removes most riverine dissolved iron, the river Fe flux to the open ocean is much smaller than the river load suggests. That is one reason iron is scarce offshore and becomes a limiting nutrient (see HNLC below).
Hydrothermal Vents
Setting and types
Seawater penetrates the young oceanic crust at spreading ridges, is heated near the magma chamber, reacts with basalt, and rises buoyantly to vent at the sea floor. Warm springs were first found on the Galápagos Rift in 1977 and high-temperature black smokers on the East Pacific Rise in 1979.
| Vent type | Temperature | Look and chemistry |
|---|---|---|
| Black smoker | about 350–400 °C | Acidic, reducing; metal sulfide particles precipitate on mixing, forming black “smoke” and sulfide chimneys |
| White smoker | Lower (about 100–300 °C) | Barite, anhydrite, silica precipitates |
| Diffuse flow | Warm (a few to tens of °C) | Vent fluid already mixed with seawater below the floor; supports the biological communities |
| Off-axis, ultramafic-hosted (Lost City type) | Moderate (tens of °C) | Alkaline, rich in H\(_2\) and CH\(_4\) from serpentinisation of peridotite; carbonate–brucite chimneys |
In the Indian Ocean, high-temperature fields have been found on the Central Indian Ridge (the Kairei field is a well-studied example).
What happens to seawater in the crust
graph TD
A["Recharge: cold seawater
enters crust"] --> B["Down-flow, heating
Anhydrite (CaSO4) precipitates above ~150 °C
Mg fixed in clays and Mg-silicates
(releases H+ → acidity)"]
B --> C["Reaction zone near magma
~400 °C; leaching of basalt:
Fe, Mn, Cu, Zn, Si, Li, K, Rb, Ca
Sulfate reduced to H2S
Phase separation possible"]
C --> D["Up-flow: buoyant fluid
rises rapidly"]
D --> E["Venting: mixing with
2 °C seawater
Sulfides, then Fe-oxyhydroxides
precipitate in the plume"]Vent-fluid chemistry relative to seawater
| Constituent | Vent fluid vs seawater | Reason |
|---|---|---|
| Mg | Removed (≈ 0) | Fixed in smectite, chlorite and other Mg-silicates; the defining feature |
| SO\(_4^{2-}\) | Removed (≈ 0) | Anhydrite precipitation on heating; reduction to sulfide |
| pH | Acidic (about 3–4 at 25 °C measurement) | Mg-silicate formation releases H\(^+\) |
| H\(_2\)S | Strongly enriched | Leached from basalt sulfides and from sulfate reduction |
| Fe, Mn | Enriched by orders of magnitude | Leached by hot acidic, reducing, chloride-rich fluid |
| Cu, Zn | Enriched | Same; precipitate as chimney sulfides |
| Li, K, Rb, Cs | Enriched | Leached from basalt at high temperature |
| Ca | Enriched | Released in exchange for Mg; partly lost as anhydrite |
| Si | Strongly enriched | Quartz solubility high at high temperature |
| \(^{3}\)He, CH\(_4\), H\(_2\) | Enriched | Mantle helium, magmatic and water–rock gases |
| Cl | Variable (above or below seawater) | Phase separation: vapour (low Cl) and brine (high Cl) |
The zero-Mg end-member
Vent samples are almost always contaminated by seawater entrained during sampling. Because the pure vent fluid has zero Mg, plot each constituent against Mg and extrapolate the sample–seawater line to Mg = 0. Equivalently, the vent-fluid fraction in a sample is
$$f = 1 - \frac{\text{Mg}_{sample}}{\text{Mg}_{sw}}, \qquad C_{em} = \frac{C_{sample} - (1-f)\,C_{sw}}{f}$$Plumes and their effect on ocean chemistry
The buoyant plume rises a few hundred metres, then spreads laterally at its level of neutral buoyancy as a non-buoyant plume that can be traced for long distances.
- \(^{3}\)He excess is the conservative tracer of the plume; helium plumes from the East Pacific Rise can be followed across much of the Pacific at mid-depth.
- Fe and Mn oxidise and precipitate as oxyhydroxides; Fe precipitates faster than Mn, so dissolved Mn travels further.
- The fresh Fe-oxyhydroxide particles scavenge dissolved P, V, As, Cr, rare-earth elements and Th from seawater, so plumes are a sink for these elements.
- Metalliferous sediments (Fe–Mn-rich, rare-earth-bearing) accumulate near ridge crests from plume fallout.
- Some hydrothermal iron, stabilised by organic ligands and fine particles, survives long-distance transport; this has made vents a recognised source of dissolved Fe to the deep ocean.
| Element | Net role of vents |
|---|---|
| Mg, SO\(_4\) | Sink |
| Li, Rb, K, Ca, Si, Mn, Fe, \(^{3}\)He | Source |
| P, V, U, REE | Sink (scavenged by plume particles; U taken up in low-temperature alteration) |
Anoxic Basins and Oxygen Minimum Zones
Why water goes anoxic
Oxygen is supplied only by contact with the atmosphere (and photosynthesis at the surface) and consumed by respiration everywhere. Water loses all its oxygen where respiration outpaces renewal:
- Restricted circulation: a sill or a strong permanent pycnocline isolates deep water (Black Sea, Cariaco Basin, fjords, Baltic deeps).
- High organic flux: productive surface water supplies sinking organic matter.
- Old or poorly ventilated water: intermediate waters in the tropics that have travelled far from their source.
Permanently anoxic (euxinic) basins
| Basin | Character |
|---|---|
| Black Sea | Largest permanently anoxic basin. A low-salinity surface layer fed by rivers sits on saline water entering from the Mediterranean through the Bosporus; the strong halocline blocks ventilation. Below roughly 100–200 m the water contains H\(_2\)S (several hundred µmol kg\(^{-1}\) at depth) |
| Cariaco Basin (off Venezuela) | Silled basin under a productive upwelling region; anoxic below a few hundred metres; laminated sediments used for high-resolution palaeoclimate |
| Fjords with sills (Framvaren in Norway; Saanich Inlet in Canada, seasonally) | Restricted deep-water renewal |
| Baltic deeps | Intermittently anoxic; renewed by occasional major saltwater inflows from the North Sea |
| Deep hypersaline anoxic basins (eastern Mediterranean) | Brines from dissolving evaporites; density barrier prevents mixing |
The redox sequence in the water column
As oxygen runs out, bacteria use the next most energy-yielding oxidant. In order:
$$\text{O}_2 \;\rightarrow\; \text{NO}_3^- \;\rightarrow\; \text{Mn(IV)} \;\rightarrow\; \text{Fe(III)} \;\rightarrow\; \text{SO}_4^{2-} \;\rightarrow\; \text{CO}_2\ (\text{methanogenesis})$$In a euxinic water column such as the Black Sea, the sequence appears vertically:
| Zone | What you see |
|---|---|
| Oxic surface | O\(_2\) high, NO\(_3^-\) low (used by plankton) |
| Oxycline | O\(_2\) falls; nitrate maximum from nitrification of sinking N |
| Suboxic zone | O\(_2\) and H\(_2\)S both very low; nitrate consumed (denitrification, anammox); dissolved Mn\(^{2+}\) maximum, Fe\(^{2+}\) rising; Mn and Fe oxides formed above sink into it and dissolve |
| Sulfidic deep water | H\(_2\)S and NH\(_4^+\) rise with depth; sulfate slightly depleted; alkalinity and phosphate high |
Sulfate reduction, written with Redfield-type organic matter simplified to CH\(_2\)O:
$$2\,\text{CH}_2\text{O} + \text{SO}_4^{2-} \;\rightarrow\; \text{H}_2\text{S} + 2\,\text{HCO}_3^-$$Every mole of sulfate reduced adds two moles of DIC and two equivalents of alkalinity. That is why anoxic deep waters have high alkalinity.
Geochemical signatures in sediments
| Signature | Reason |
|---|---|
| Laminated (varved) sediment | No burrowing animals to mix it |
| High organic carbon | Slower degradation, less bioturbation, higher supply |
| Pyrite framboids, including ones formed in the water column | Fe\(^{2+}\) + H\(_2\)S |
| Enrichment of Mo, U, V, Re | Reduced or thiolated forms are particle-reactive and are captured; Mo is the classic euxinic indicator |
| Low Mn | Mn stays dissolved as Mn\(^{2+}\) instead of depositing as oxide |
| Biomarkers of green sulfur bacteria | Anoxygenic photosynthesis where H\(_2\)S reaches the photic zone (photic-zone euxinia) |
Ancient black shales and Mediterranean sapropels are read using exactly these signatures.
Oxygen minimum zones are not anoxic basins
Open-ocean oxygen minimum zones (OMZs) occur at intermediate depths (a few hundred to about 1,000 m) beneath productive upwelling regions: the Arabian Sea, the Eastern Tropical North Pacific and the Eastern Tropical South Pacific. Their cores are functionally anoxic (nanomolar O\(_2\)) but generally not sulfidic: nitrate is rarely exhausted, so sulfate reduction rarely takes over in the water column.
| Feature | OMZ | Euxinic basin |
|---|---|---|
| Circulation | Open ocean, weak ventilation | Restricted, silled or strongly stratified |
| Dominant anaerobic process | Denitrification and anammox (N loss) | Sulfate reduction |
| H\(_2\)S in water column | Normally absent (episodic on some shelves) | Present, often hundreds of µmol kg\(^{-1}\) |
| Tell-tale signal | Secondary nitrite maximum; nitrate deficit relative to phosphate | Sulfide, ammonium, high alkalinity |
| Climatic effect | N\(_2\)O production; fixed-N loss for the global ocean | Burial of organic carbon and Mo |
The Arabian Sea OMZ is one of the world’s three main sites of water-column denitrification, a significant fraction of global fixed-nitrogen loss. The Bay of Bengal, though it also has very low oxygen at intermediate depth, shows much weaker denitrification; why the two Indian Ocean basins differ is an active research question. Denitrification and anammox are developed further on the Nutrient and Trace-Metal Cycling page.
HNLC Waters
The paradox
In most of the surface ocean, phytoplankton strip nitrate and phosphate to near zero. In three large regions they do not: surface nitrate stays at several to tens of µmol kg\(^{-1}\) year-round, yet chlorophyll is low. These are high-nutrient, low-chlorophyll (HNLC) regions:
| HNLC region | Notes |
|---|---|
| Southern Ocean | The largest; also limited by light (deep mixing, low sun) and, north of the Polar Front, by silicate |
| Eastern equatorial Pacific | Nutrients supplied by equatorial upwelling |
| Subarctic North Pacific | Seasonal; iron arrives in pulses with Asian dust |
Explanations considered
| Hypothesis | Evidence |
|---|---|
| Iron limitation | Surface dissolved Fe is sub-nanomolar, far below phytoplankton needs; bottle and mesoscale additions of Fe trigger blooms |
| Grazing control | Microzooplankton graze small cells fast enough to hold biomass down; works together with Fe limitation |
| Light limitation | Deep mixed layers in the Southern Ocean keep cells in the dark much of the time |
| Silicate limitation | Diatoms in the sub-Antarctic zone run short of Si before N |
The modern consensus: iron is the primary limiting factor, with grazing, light and silicate modulating it regionally. HNLC regions are remote from continental dust sources and from shelf sediments, the two main sources of Fe to surface water.
Martin’s iron hypothesis and the experiments
John Martin proposed in the late 1980s that iron limits productivity in HNLC regions, and that more iron-rich dust during glacial periods fertilised the Southern Ocean, increased the biological pump and helped lower glacial atmospheric CO\(_2\). Ice cores do show much higher dust deposition in glacial periods.
Mesoscale iron-addition experiments (released iron sulfate with an inert tracer, SF\(_6\), and followed the patch) included IronEx I and II in the equatorial Pacific, SOIREE and others in the Southern Ocean, and LOHAFEX, an Indo-German experiment in the South Atlantic sector of the Southern Ocean. Natural fertilisation downstream of islands (Kerguelen, Crozet) was studied for comparison.
What they showed:
- Adding iron always increased photosynthetic efficiency and chlorophyll; usually diatoms bloomed.
- Surface nitrate and pCO\(_2\) fell in the patch.
- Export of the extra carbon to depth was small or uncertain in most experiments; much was respired or grazed in the surface layer. In LOHAFEX, where silicate was low, non-diatom plankton bloomed and were heavily grazed.
- Natural fertilisation near islands, sustained over a season, exported more carbon per unit iron than the short artificial patches.
So the iron hypothesis is confirmed for productivity, but deliberate ocean iron fertilisation as a climate fix is not supported by the evidence on export, and it raises ecological and governance concerns.
Iron chemistry in seawater
- Fe(III), the stable form in oxic water, is very insoluble as hydroxide; inorganic solubility is far below 1 nmol kg\(^{-1}\).
- More than 99% of dissolved Fe is bound to strong organic ligands (including siderophores made by bacteria), which keep it in solution.
- Sources: aeolian dust, continental-shelf sediments (reductive release), upwelling of deep water, hydrothermal vents, glacial and sea-ice melt.
- Phytoplankton need Fe for photosynthetic electron transport (cytochromes, ferredoxin), nitrate reduction and, for nitrogen fixers, nitrogenase. Diazotrophs therefore have a particularly high Fe demand.
Memory Tricks
- Mixing diagram: “Below the line, something died (was removed); above the line, something was born (added).”
- Vents, “No Mg, no SO\(_4\), lots of metal and gas”: Mg and sulfate out; Fe, Mn, Li, Si, H\(_2\)S, \(^{3}\)He in.
- Redox ladder: “Old Nick Makes Fresh Sulphur Methane”: O\(_2\), NO\(_3\), Mn, Fe, SO\(_4\), CH\(_4\).
- OMZ vs euxinic: “OMZ loses N, basins make S.”
- HNLC regions, “SEN”: Southern Ocean, Equatorial Pacific, North (subarctic) Pacific.
Don’t Confuse
| This | Is not this |
|---|---|
| Effective river end-member \( C^* \) (intercept of the high-salinity line) | Measured river concentration \( C_{river} \) |
| Flocculation of Fe at low salinity (removal) | Desorption of Ba and Ra at low salinity (addition) |
| Black smoker (350–400 °C, acidic, sulfides) | Lost City-type vent (alkaline, H\(_2\), CH\(_4\), carbonate chimneys) |
| Euxinic basin (H\(_2\)S in the water column) | OMZ (functionally anoxic, nitrate present, no sulfide) |
| Suboxic (O\(_2\) and H\(_2\)S both near zero) | Anoxic and sulfidic |
| HNLC (nutrients unused because of Fe) | Oligotrophic gyre (low nutrients and low chlorophyll; N or P limited) |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- Which element is taken as zero in a pure high-temperature vent fluid?
- Name the dominant anaerobic process in the core of the Arabian Sea OMZ.
- Name the three main HNLC regions.
Answers
- Magnesium.
- Denitrification (with anammox): fixed-nitrogen loss.
- Southern Ocean, eastern equatorial Pacific, subarctic North Pacific.
Level 2: Part B Style
Practice Q1. On a dissolved-constituent versus salinity plot for an estuary, the data for barium lie above the theoretical dilution line at low salinity. The most likely cause is:
(a) flocculation of humic colloids (b) desorption of Ba from river-borne particles by seawater cations (c) uptake by diatoms (d) precipitation of barite
Answer: (b)
Data above the line mean addition. Seawater Mg, Ca and Na displace Ba from exchange sites on suspended clays. (a), (c) and (d) would all remove Ba and put data below the line.
Practice Q2. Which pair of constituents is depleted in high-temperature vent fluids relative to seawater?
(a) Li and Mn (b) Mg and SO\(_4^{2-}\) (c) Si and Fe (d) Ca and K
Answer: (b)
Mg is fixed in Mg-silicates; sulfate precipitates as anhydrite and is partly reduced. All other pairs are enriched.
Practice Q3. In the suboxic zone of the Black Sea, which dissolved species typically shows a maximum?
(a) O\(_2\) (b) Mn\(^{2+}\) (c) NO\(_3^-\) (d) SO\(_4^{2-}\)
Answer: (b)
Mn oxides formed in the oxic layer sink into the suboxic zone and are reduced to soluble Mn\(^{2+}\), producing a dissolved maximum. Nitrate peaks higher up, in the oxycline; O\(_2\) is near zero there.
Practice Q4. Which observation is the strongest evidence that iron limits phytoplankton growth in HNLC regions?
(a) Surface nitrate is high (b) Chlorophyll rises and nitrate falls when Fe is added to a marked water patch (c) Glacial dust fluxes were higher (d) Deep water is rich in phosphate
Answer: (b)
Only a controlled addition demonstrates cause. (a) is the definition of HNLC, (c) bears on the glacial hypothesis, and (d) is general.
Level 3: Part C Style
Practice Q5. Two vent-fluid samples from the same chimney gave:
| Sample | Mg (mmol kg\(^{-1}\)) | Mn (µmol kg\(^{-1}\)) | Cl (mmol kg\(^{-1}\)) |
|---|---|---|---|
| A | 13.2 | 480 | 520 |
| B | 39.6 | 160 | 535 |
| Seawater | 52.8 | 0 (take as negligible) | 540 |
Which statements are correct?
- Sample A contains 75% vent fluid.
- Both samples extrapolate to a Mn end-member of 640 µmol kg\(^{-1}\).
- The Cl end-member is about 513 mmol kg\(^{-1}\), below seawater, suggesting a vapour-rich (phase-separated) fluid.
- Sample B is the better sample for end-member work because it has more seawater.
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- 1: \( f_A = 1 - 13.2/52.8 = 0.75 \). True.
- 2: A: \( 480/0.75 = 640 \); B: \( f_B = 1 - 39.6/52.8 = 0.25 \), \( 160/0.25 = 640 \). True.
- 3: from A, \( \text{Cl}_{em} = (520 - 0.25\times540)/0.75 = 513.3 \); from B, \( (535 - 0.75\times540)/0.25 = 520 \). Both are below 540; the small difference reflects analytical scatter. Low Cl indicates a vapour-phase contribution. True.
- 4: false. The sample with the least seawater (A) gives the more reliable extrapolation, since errors are amplified by \( 1/f \).
Practice Q6. In a silled fjord, deep-water profiles show: O\(_2\) = 0 below 60 m; H\(_2\)S rising to 300 µmol kg\(^{-1}\) at 150 m; sulfate at 150 m is 300 µmol kg\(^{-1}\) below the salinity-predicted value. Assume all sulfide comes from sulfate reduction of CH\(_2\)O and none is lost. Which statements are correct?
- Sulfate reduction has added about 600 µmol kg\(^{-1}\) of DIC at 150 m.
- Alkalinity at 150 m should be higher than in the oxic surface water at the same salinity.
- Dissolved Mn\(^{2+}\) should be higher in the deep water than in the oxic surface water.
- Sediments below this water should be enriched in Mn oxides.
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- 1: \( 2\,\text{CH}_2\text{O} + \text{SO}_4^{2-} \rightarrow \text{H}_2\text{S} + 2\,\text{HCO}_3^- \): 300 µmol sulfate reduced → 600 µmol DIC. True.
- 2: sulfate reduction generates alkalinity (2 equivalents per mole). True.
- 3: Mn oxides are reduced; Mn\(^{2+}\) accumulates in anoxic water. True.
- 4: false. Mn stays dissolved; euxinic sediments are Mn-poor.
Practice Q7. An iron-addition experiment in a Southern Ocean HNLC patch produced the following over 20 days: chlorophyll up eightfold; nitrate down from 25 to 21 µmol kg\(^{-1}\); silicate down from 10 to 2 µmol kg\(^{-1}\); sediment traps at 100 m below the patch showed no significant increase in particle flux. Which statements are correct?
- Diatoms are the likely bloom-formers.
- Silicate may have become limiting before nitrate.
- The experiment shows that iron limits productivity here.
- The experiment demonstrates efficient carbon sequestration.
(a) 1, 2 and 3 only (b) 3 and 4 only (c) 1 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- 1: the large silicate drawdown relative to nitrate points to diatoms. True.
- 2: Si fell by 8 µmol kg\(^{-1}\) to 2, while N fell only 4 to 21: silicate is nearly exhausted. True.
- 3: chlorophyll and nutrient drawdown followed iron addition. True.
- 4: false. No increase in export flux was detected within the experiment.
Quick Revision Table
| Idea | Fact or formula |
|---|---|
| Estuary | semi-enclosed, seawater measurably diluted; salt wedge, partially mixed, well mixed |
| Mixing line | \( C = C_r + (C_{sw} - C_r)S/S_{sw} \); below = removal, above = addition |
| Effective end-member | intercept of high-S tangent; flux \( = Q\,C^* \) |
| Estuarine removal | Fe (flocculation), humics, Si (diatoms), P (adsorption) |
| Estuarine addition | Ba, Ra (desorption), Mn (sediments), NH\(_4^+\) |
| Vents | black smokers 350–400 °C, acidic; Mg and SO\(_4\) ≈ 0; Fe, Mn, Li, Si, H\(_2\)S, \(^{3}\)He enriched |
| End-member | \( f = 1 - \text{Mg}_s/\text{Mg}_{sw} \); \( C_{em} = [C_s - (1-f)C_{sw}]/f \) |
| Plumes | \(^{3}\)He tracer; Fe-oxyhydroxides scavenge P, V, REE |
| Lost City type | ultramafic, alkaline, H\(_2\), CH\(_4\), carbonate chimneys |
| Redox ladder | O\(_2\) → NO\(_3^-\) → Mn(IV) → Fe(III) → SO\(_4^{2-}\) → CO\(_2\) |
| Black Sea | halocline from river-fed surface over Mediterranean inflow; H\(_2\)S below about 100–200 m |
| Euxinic sediments | laminated, high C\(_{org}\), pyrite, Mo/U/V enriched, Mn depleted |
| OMZs | Arabian Sea, ETNP, ETSP; denitrification and anammox; secondary nitrite maximum |
| HNLC | Southern Ocean, eastern equatorial Pacific, subarctic Pacific; Fe limitation |
| Iron experiments | IronEx I and II, SOIREE, LOHAFEX; blooms yes, export small |
Key Takeaways
What’s Next
- Nutrient and Trace-Metal Cycling — Redfield stoichiometry, N\(^*\), and how Fe, Cd, Zn and Mn are cycled in the open ocean.
- Oceanic Sediments, Diagenesis and Marine Mineral Resources — the same redox ladder in pore waters, and sea-floor sulfides.
- Ocean Circulation: Ekman, Upwelling, ENSO, IOD — the upwelling that feeds the equatorial Pacific HNLC region and the Arabian Sea OMZ.
- Chemical Oceanography: Quick Revision