Earth Materials, Surface Features and Processes
CSIR NET Earth Sciences Part B: minerals and rocks, ore formation, Indian minerals, weathering, soils, sediments, surface energy balance, Indian rivers.
- 6
- Topics
- 113
- Min read
- 01 Minerals and Rocks: Composition and PropertiesStart here CSIR NET Earth Sciences: crustal elements, silicate structures, mineral physical properties, igneous, metamorphic and sedimentary rocks and the rock cycle.
- 02 Mineral Concentration Processes and Rocks and Minerals of India CSIR NET Earth Sciences: ore grade and concentration factor, magmatic, hydrothermal, sedimentary, placer, residual and supergene ores, and India's ores.
- 03 Physiography, Weathering, Erosion, Transport and Deposition CSIR NET Earth Sciences: landform scales, cycle of erosion, weathering, mass wasting, fluvial, glacial, aeolian and coastal erosion, transport and deposition.
- 04 Soils, Sediments and Sedimentary Rocks CSIR NET Earth Sciences: soil profiles, Indian soils, grain size and phi scale, sorting, sandstone and limestone classes, diagenesis, structures, environments.
- 05 Energy Balance of Surface Processes CSIR NET Earth Sciences: energy sources, global radiation budget, albedo, net radiation, Bowen ratio, ground heat flux, stream and wave power.
- 06 Physiography and River Basins of India CSIR NET Earth Sciences: India's physiographic divisions, Himalaya, plains, peninsular plateau, coasts and islands, drainage patterns and major river basins.
- Earth Materials, Surface Features and Processes Short Notes Revise The whole chapter on one page.
Chapter Overview
This is the second Part B unit of CSIR NET Earth, Atmospheric, Ocean and Planetary Sciences (subject code 702). It covers what the outer Earth is made of and how its surface is shaped: minerals and rocks, how useful elements are concentrated into ore, where India’s rocks and minerals lie, how weathering, erosion, transport and deposition sculpt the land, how soils and sedimentary rocks form, what energy drives these processes, and the physiography and rivers of India.
Part B is common to every candidate in the subject. The unit is mostly recall (mineral classes, rock names, landforms, Indian localities and rivers), with short calculations that reward a clear method: a mineral formula from an oxide analysis, a concentration factor, Stokes settling, slope stability, grain-size statistics, compaction, net radiation and the Bowen ratio, and basin morphometry.
What You’ll Learn
By the end of this chapter you will be able to:
- Classify silicates by structure, identify minerals by their physical properties and name igneous and metamorphic rocks
- Explain how magmatic, hydrothermal and surface processes concentrate ores, and place India’s main rocks and mineral deposits
- Describe weathering, mass wasting and the landforms made by rivers, glaciers, wind and waves, and compute settling and denudation rates
- Classify soils (including India’s soils), sediments, sandstones and limestones, and read sedimentary structures
- Use the global radiation budget and the surface energy balance, and estimate stream and wave power
- Recall India’s physiographic divisions, drainage patterns and river basins
Prerequisites
- The previous unit, The Earth and the Solar System, especially Earth’s composition, the time scale and isostasy
- BSc-level chemistry for formulas and reactions (see Chemical Sciences)
- Blackbody radiation and basic mechanics (see Physical Sciences)
- Percentages, logarithms and unit conversion (see Numerical Ability)
Learning Path
The topics follow the order of the official syllabus lines:
graph TD
A["1. Minerals and Rocks"] --> B["2. Mineral Concentration and India's Rocks and Minerals"]
A --> C["3. Physiography, Weathering, Erosion, Transport, Deposition"]
C --> D["4. Soils, Sediments and Sedimentary Rocks"]
C --> E["5. Energy Balance of Surface Processes"]
B --> F["6. Physiography and River Basins of India"]
D --> F
E --> F
F --> G["Quick Revision"]Topics in This Chapter
| Topic | What it covers | Time |
|---|---|---|
| Minerals and Rocks: Composition and Properties | crustal elements, silicate structures, non-silicates, hardness, cleavage, crystal systems, igneous texture and composition, Bowen series, metamorphic grade and facies, rock cycle | 30 min |
| Mineral Concentration Processes and Rocks and Minerals of India | ore, grade, concentration factor, magmatic, pegmatitic, skarn and hydrothermal ores, BIF, placers, bauxite, supergene enrichment, Indian cratons and basins, Indian mineral localities | 30 min |
| Physiography, Weathering, Erosion, Transport and Deposition | landform orders, hypsometry, Davis and later models, physical and chemical weathering, Goldich series, CIA, karst, mass wasting, Manning, Stokes, Hjulström, fluvial, glacial, aeolian and coastal landforms, denudation | 35 min |
| Soils, Sediments and Sedimentary Rocks | soil factors, horizons and processes, clay minerals, USDA orders, soils of India, Wentworth and phi, Folk–Ward statistics, maturity, diagenesis, sandstone and carbonate classes, evaporites, coal, structures, environments | 35 min |
| Energy Balance of Surface Processes | energy sources, radiation laws, effective temperature, global budget, albedo, net radiation, Bowen ratio, latent heat and evaporation, damping depth, Arrhenius, stream, wind and wave power | 30 min |
| Physiography and River Basins of India | physiographic divisions, Himalayan ranges and thrusts, northern plains, peninsular plateau, Thar, coasts and islands, drainage patterns, Himalayan vs peninsular rivers, major river systems, basin areas, morphometry | 30 min |
| Quick Revision | every value, formula and trap on one page | 10 min |
Where each official syllabus line is covered
| Official syllabus line | Covered on |
|---|---|
| Minerals and rocks: composition and properties | Minerals and Rocks: Composition and Properties |
| Mineral concentration processes; distribution of rocks and minerals in India | Mineral Concentration Processes and Rocks and Minerals of India |
| Physiography; weathering, erosion, transport, deposition | Physiography, Weathering, Erosion, Transport and Deposition (general physiography and processes); Indian physiography on Physiography and River Basins of India |
| Soils, sediments and sedimentary rocks | Soils, Sediments and Sedimentary Rocks |
| Energy balance of surface processes | Energy Balance of Surface Processes |
| Physiographic features and river basins of India | Physiography and River Basins of India |
How CSIR NET Asks It
Per the NTA information bulletin for December 2026, Earth Sciences Part B has 50 questions, of which 35 are to be attempted, at 2 marks each with −0.5 for a wrong answer (full table on the Earth Sciences overview). There is no official count of questions per unit. From the syllabus wording and the style of the subject, expect these kinds of question from this unit:
| Question type | Typical content | Where to practise |
|---|---|---|
| One-line recall | silicate classes and Si:O ratios, Mohs scale, rock pairs, index minerals, deposit types, landforms, soil horizons, Indian localities, river sources | Level 1 and 2 on each page |
| Matching lists | mineral–formula, deposit–process, locality–mineral, river–source, dune–wind regime | Level 2 and 3 |
| One-step numerical | concentration factor, Stokes ratio, factor of safety, phi conversion, Bowen-ratio split, latent heat to evaporation, bifurcation ratio | Level 2 |
| Multi-step or data | oxide analysis to mineral composition; supergene mass balance; sediment-load denudation with isostasy; Folk–Ward sorting from percentiles; compaction; reservoir evaporation; runoff coefficient | Level 3 |
| Statement evaluation | “which of these are correct” on weathering, soils, structures, energy budget, Himalayan vs peninsular rivers | Level 3 |
Quick Reference
| Quantity | Value |
|---|---|
| Crust (wt%) | O 46.6, Si 27.7, Al 8.1, Fe 5.0, Ca 3.6, Na 2.8, K 2.6, Mg 2.1 |
| Si:O ratios | neso 1:4; soro 2:7; ring and single chain 1:3; double chain 4:11; sheet 2:5; framework 1:2 |
| Igneous silica limits | 45, 52, 63 wt% SiO\(_2\) |
| Stokes settling | \( w_s = (\rho_s - \rho_f)gd^2/18\mu \) |
| Phi scale | \( \phi = -\log_2 d \) (mm); sand −1 to 4, silt 4 to 8, clay above 8 |
| Effective temperature | \( [S_0(1-\alpha)/4\sigma]^{1/4} \approx 255 \) K |
| Surface balance | \( R_n = H + LE + G \); \( \beta = H/LE \); 1 mm day\(^{-1}\) ≈ 28.4 W m\(^{-2}\) |
| India’s area | about 32.87 lakh km\(^2\); Ganga basin about 26% of it |
Start Learning
Begin with the first topic: