Soils, Sediments and Sedimentary Rocks
CSIR NET Earth Sciences: soil profiles, Indian soils, grain size and phi scale, sorting, sandstone and limestone classes, diagenesis, structures, environments.
- 19 min
On this page · 12 sections
Prerequisites
- Weathering reactions and mineral stability, which make soils and supply sediment: Physiography, Weathering, Erosion, Transport and Deposition.
- Silicate and carbonate minerals by name: Minerals and Rocks: Composition and Properties.
- Soil chemistry (cation exchange, pH, salinity): Soil Chemistry, Toxic Organics and Monitoring.
- Superposition and other principles used to read layered rocks: Stratigraphy, Origin of Life and the Fossil Record.
The Hook: Black Cotton Soil Cracks Your Boots
Soils
What soil is
Soil is the layer of weathered mineral matter, organic matter, water and air at the land surface that supports plant growth. A typical loam is about half solids (roughly 45% mineral, 5% organic) and half pore space shared by water and air; the proportions change with wetness.
Soil-forming factors
Jenny (1941) wrote soil as a function of five factors, remembered as CLORPT:
$$S = f(\text{cl}, \text{o}, \text{r}, \text{p}, \text{t})$$| Factor | Effect |
|---|---|
| Climate | the strongest control: rainfall and temperature set leaching, weathering intensity and organic decay |
| Organisms | vegetation type (grass gives thick dark A horizons; conifers give acid litter); burrowing animals; microbes |
| Relief (topography) | slope controls drainage and erosion; hollows collect water and become waterlogged |
| Parent material | sets texture and mineralogy, strongest in young soils |
| Time | profiles deepen and differentiate; old tropical surfaces have very deep, leached soils |
The soil profile
| Horizon | Name and character |
|---|---|
| O | organic litter and humus |
| A | topsoil: mineral horizon darkened by humus; zone of biological activity and eluviation (loss) |
| E | eluviated horizon: pale, leached of clay, Fe and Al; typical of podzols |
| B | subsoil, zone of illuviation (accumulation) of clay, Fe–Al oxides, humus or CaCO\(_3\) |
| C | partly weathered parent material (saprolite) |
| R | unweathered bedrock |
The solum is the A + E + B part, where soil-forming processes are active.
Soil-forming processes
| Process | Climate and setting | Result |
|---|---|---|
| Podzolisation | cool, humid; acid conifer litter | acid organic compounds strip Fe and Al from the E horizon (bleached, ash-grey) and deposit them in the B: podzols (Spodosols) |
| Laterisation | hot, humid tropics with seasonal rain | silica and bases leached; Fe and Al oxides concentrate: laterite, Oxisols |
| Calcification | semi-arid; evaporation exceeds rainfall | CaCO\(_3\) accumulates in the B or C horizon as nodules or hardpan (kankar, calcrete, caliche) |
| Salinisation | arid, poorly drained or over-irrigated | soluble salts rise and crust the surface (reh, usar lands in north India) |
| Gleying | waterlogged, reducing | grey-blue colours from reduced iron, with rusty mottles |
Texture and clay minerals
Soil texture classes use the proportions of sand (2–0.05 mm in the USDA scheme), silt (0.05–0.002 mm) and clay (below 0.002 mm), read from the texture triangle. Loam has roughly balanced proportions and good water and air holding.
| Clay mineral | Structure | Swelling | Cation exchange capacity (approx. cmol\(_c\) kg\(^{-1}\)) | Typical setting |
|---|---|---|---|---|
| Kaolinite | 1:1 (one tetrahedral + one octahedral sheet) | none | low, about 1–15 | intensely weathered, tropical, acid, well drained |
| Illite | 2:1, K between layers | little | about 10–40 | weathered micas; temperate soils, shales |
| Smectite (montmorillonite) | 2:1, expandable | strong shrink–swell | high, about 80–120 | poorly drained; basalt-derived; black cotton soil |
| Vermiculite | 2:1 | moderate | high | weathered biotite |
| Chlorite | 2:1:1 | none | low | low-grade metamorphic rocks, cool soils |
| Humus (organic matter) | very high | topsoil |
Ion exchange and pH are covered on the soil chemistry page.
Soil orders (USDA Soil Taxonomy)
The USDA system has 12 orders: Alfisols, Andisols, Aridisols, Entisols, Gelisols, Histosols, Inceptisols, Mollisols, Oxisols, Spodosols, Ultisols and Vertisols. The ones most often asked:
| Order | Key feature | Example |
|---|---|---|
| Entisols | very young, no horizons | fresh alluvium, dune sand |
| Inceptisols | weakly developed | young alluvium, mountain slopes |
| Vertisols | swelling clays, deep cracks | black cotton soil (regur) |
| Aridisols | dry, often calcic or saline horizons | desert soils |
| Mollisols | thick, dark, base-rich A horizon | grassland soils |
| Alfisols | clay-enriched B, moderately leached, base-rich | many red soils |
| Ultisols | clay-enriched B, strongly leached, base-poor | humid subtropics |
| Oxisols | Fe–Al oxide-rich, extremely weathered | lateritic tropical soils |
| Spodosols | Fe–Al–humus B horizon under bleached E | podzols of cool forests |
| Histosols | organic (peat) | bogs, marshes |
| Gelisols | permafrost | high latitudes and altitudes |
| Andisols | volcanic ash | volcanic regions |
Soils of India
The ICAR classification commonly used in Indian textbooks recognises eight major groups:
| Soil | Where | Parent material and process | Character |
|---|---|---|---|
| Alluvial | Indo-Gangetic–Brahmaputra plains, deltas and coastal plains; the most extensive group | river deposits; khadar (new, floodplain) and bhangar (old, higher terraces, with kankar) | fertile; rich in potash, poor in nitrogen and phosphorus |
| Black (regur, black cotton) | Deccan Traps of Maharashtra, Gujarat, MP and adjoining states | weathered basalt | clayey, smectite-rich, deep cracks when dry, high water retention; good for cotton; Vertisols |
| Red and yellow | Archean granites and gneisses of the eastern and southern peninsula | weathered crystalline rocks; red from ferric oxide, yellow when hydrated | porous, poor in N, P and humus; many are Alfisols |
| Laterite | high-rainfall, high-temperature areas: Western Ghats, Kerala, Karnataka, the Eastern Ghats in Odisha, the north-east | laterisation | leached of bases and silica; rich in Fe and Al oxides; acidic; used as building stone |
| Arid (desert) | western Rajasthan and adjoining areas | aeolian sand, low rainfall | sandy, saline in places, low organic matter; kankar in lower horizons |
| Saline and alkaline | arid and semi-arid areas, waterlogged canal-irrigated tracts, coasts | salinisation; sodium accumulation | reh or usar; reclaimed with gypsum and drainage |
| Peaty and marshy | Kerala (kari soils), Sundarbans and other deltas, coastal Odisha | waterlogging, organic accumulation | high organic matter, acidic |
| Forest and mountain | Himalaya and other forested hills | varies with altitude and vegetation | acidic and humus-rich on upper slopes; immature on steep slopes |
Sediments
Grain size: Udden–Wentworth and the phi scale
| Class | Size (mm) | \( \phi \) |
|---|---|---|
| Boulder | above 256 | below −8 |
| Cobble | 64–256 | −6 to −8 |
| Pebble | 4–64 | −2 to −6 |
| Granule | 2–4 | −1 to −2 |
| Sand (very coarse to very fine) | 1/16–2 (0.0625–2) | 4 to −1 |
| Silt | 1/256–1/16 (0.0039–0.0625) | 8 to 4 |
| Clay | below 1/256 (about 3.9 µm) | above 8 |
Each class boundary doubles the size, so Krumbein’s phi scale makes the classes equal steps:
$$\boxed{\phi = -\log_2 d \quad (d \text{ in mm})}$$Larger grains have more negative \( \phi \). Sand subclasses: very coarse (−1 to 0), coarse (0 to 1), medium (1 to 2), fine (2 to 3), very fine (3 to 4).
Textural parameters
From the cumulative grain-size curve, read the \( \phi \) values at the 5th, 16th, 50th, 84th and 95th percentiles. Folk and Ward’s graphic measures:
$$\boxed{M_z = \frac{\phi_{16} + \phi_{50} + \phi_{84}}{3}} \qquad \boxed{\sigma_I = \frac{\phi_{84} - \phi_{16}}{4} + \frac{\phi_{95} - \phi_5}{6.6}}$$| \( \sigma_I \) (\( \phi \) units) | Sorting |
|---|---|
| below 0.35 | very well sorted |
| 0.35–0.50 | well sorted |
| 0.50–0.71 | moderately well sorted |
| 0.71–1.00 | moderately sorted |
| 1.00–2.00 | poorly sorted |
| 2.00–4.00 | very poorly sorted |
| above 4.00 | extremely poorly sorted |
Skewness measures asymmetry: beach sands are often negatively (coarse-) skewed, since waves winnow the fines; river and dune sands are often positively (fine-) skewed. Typical sorting: aeolian dune sand and beach sand, well to very well sorted; river sand, moderately sorted; glacial till and debris-flow deposits, very poorly sorted.
Shape, roundness and maturity
- Roundness is the smoothness of corners and edges (angular to well rounded); sphericity is how nearly equidimensional a grain is. A well-rounded grain can have low sphericity (a rounded rod).
- Textural maturity (Folk): immature (much clay matrix), submature (little clay, poorly sorted, angular), mature (no clay, well sorted, not rounded), supermature (no clay, well sorted, well rounded).
- Compositional maturity: the proportion of stable grains (quartz, chert) to unstable ones (feldspar, rock fragments, mafic minerals). Long transport, recycling and intense weathering raise it. Among heavy minerals, the ZTR index (zircon + tourmaline + rutile as a share of transparent non-micaceous heavies) measures maturity.
Sedimentary Rocks
Lithification and diagenesis
Diagenesis is every physical, chemical and biological change in sediment after deposition, at temperatures below those of metamorphism (up to roughly 200 °C).
| Process | Effect |
|---|---|
| Compaction | grains pack more closely; water expelled; porosity falls, most strongly in mud |
| Cementation | minerals precipitate in pores: quartz (silica), calcite, iron oxides, clays |
| Recrystallisation | aragonite to calcite; growth of crystal size |
| Replacement | one mineral replaced by another: dolomitisation, silicification |
| Dissolution | secondary porosity, important in reservoirs |
| Authigenesis | new minerals grow in place: glauconite, pyrite, zeolites, clays |
Porosity falls roughly exponentially with burial depth (Athy’s law):
$$\boxed{\phi(z) = \phi_0\,e^{-cz}}$$where \( \phi_0 \) is surface porosity and \( c \) a compaction constant (larger for mud than for sand).
Clastic (siliciclastic) rocks
| Rock | Grain size | Notes |
|---|---|---|
| Conglomerate | gravel, rounded clasts | high-energy rivers, beaches |
| Breccia | gravel, angular clasts | little transport: talus, fault zones, collapse |
| Sandstone | sand | classified by composition and matrix (below) |
| Siltstone | silt | |
| Shale | clay and silt, fissile (splits along laminae) | the most abundant sedimentary rock |
| Mudstone, claystone | clay and silt, not fissile | |
| Tillite | unsorted glacial debris, lithified |
Sandstone classification (Dott, modified by Pettijohn) uses the proportions of Quartz, Feldspar and Lithic (rock) fragments, plus the amount of fine matrix:
| Matrix | Name family | Subtypes |
|---|---|---|
| below about 15% | arenite | quartz arenite (above 95% quartz; mature, e.g. beach and dune sands); arkose or arkosic arenite (above 25% feldspar; rapid erosion of granite, arid or cold climate, short transport); lithic arenite (rock fragments dominant) |
| about 15–75% | wacke | quartz wacke, feldspathic wacke, lithic wacke; greywacke for dark, poorly sorted, matrix-rich sandstones of turbidites |
| above about 75% | mudrock |
Carbonate rocks
Limestone (mainly calcite) and dolostone (mainly dolomite) are mostly biochemical: shells and skeletal debris, ooids and lime mud from organisms in warm, shallow, clear seas.
Components: allochems (transported grains: ooids, peloids, bioclasts, intraclasts), micrite (lime mud, below about 4 µm) and sparite (clear calcite cement).
| Folk (1959, 1962) | Dunham (1962) |
|---|---|
| allochem prefix + orthochem suffix: oosparite, biomicrite, pelsparite, intramicrite; micrite; biolithite (reef) | based on depositional texture: mud-supported mudstone (under 10% grains) and wackestone (over 10% grains); grain-supported packstone (with mud) and grainstone (no mud); boundstone (organically bound); crystalline carbonate |
Dolomitisation replaces calcite by dolomite:
$$2\text{CaCO}_3 + \text{Mg}^{2+} \rightarrow \text{CaMg(CO}_3)_2 + \text{Ca}^{2+}$$Dolomite is denser, so molar volume falls by about 12–13% and porosity can increase. Many dolostones are good oil reservoirs.
Carbonate formation in the deep sea is limited by the carbonate compensation depth (CCD), below which calcite dissolves faster than it arrives; it lies roughly 4–5 km deep in today’s oceans. Below it, pelagic sediment is siliceous ooze or red clay.
Other chemical and organic rocks
| Rock | Composition and origin |
|---|---|
| Evaporites | from evaporating seawater, in order: carbonates, then gypsum/anhydrite (after roughly 80% of the water has evaporated), then halite (after roughly 90%), then K–Mg salts (sylvite, carnallite) from the last bitterns |
| Chert | microcrystalline quartz; from siliceous skeletons (radiolaria, diatoms, sponges) or replacement; flint is chert in chalk |
| Banded iron formation | Precambrian Fe-oxide–chert layers (see Mineral Concentration Processes and Rocks and Minerals of India) |
| Phosphorite | apatite precipitated in upwelling zones |
| Coal | compacted plant matter: peat → lignite → sub-bituminous → bituminous → anthracite; carbon content and calorific value rise, and moisture and volatile matter fall, with rank (burial temperature and time) |
Sedimentary structures
| Structure | What it shows |
|---|---|
| Bedding and lamination | layers; beds above 1 cm, laminae below |
| Cross-bedding | inclined foresets of migrating ripples and dunes; curved, tangential bases and truncated tops show way up; foreset dip gives palaeocurrent direction |
| Graded bedding | coarse at the base, fining upward in one bed; typical of turbidites (Bouma sequence Ta–Te) |
| Ripple marks | symmetrical (wave, oscillatory; pointed crests up) vs asymmetrical (current; steep side faces downstream) |
| Mud cracks (desiccation cracks) | polygonal cracks, V-shaped in section, opening upward; subaerial exposure |
| Sole marks: flute casts, groove casts | erosional marks on the base of a bed, cast by the bed above; flutes give current direction |
| Load casts and flame structures | soft-sediment deformation of sand into underlying mud |
| Raindrop imprints, trace fossils, stromatolites | environment and way up |
Structures that show way up (which way was originally up) are used to tell whether folded beds are overturned: cross-bed truncation, graded bedding, mud cracks, symmetrical ripple crests, load casts, flame structures, and many trace fossils.
Depositional environments and facies
| Setting | Environment | Typical deposits |
|---|---|---|
| Continental | alluvial fan | poorly sorted conglomerate, arkose |
| braided and meandering river | cross-bedded sandstone in channels, fining-upward cycles; mud on floodplains | |
| lake | laminated mud, varves, evaporites in closed basins | |
| desert (aeolian) | well-sorted, large-scale cross-bedded quartz sandstone; frosted grains | |
| glacial | till, tillite, outwash, varves | |
| Transitional | delta | coarsening-upward cycles (prodelta mud to delta-front sand) |
| beach, barrier, tidal flat, lagoon, estuary | well-sorted sand; herringbone cross-bedding (tidal); lagoonal mud | |
| Marine | shelf | sandstone, shale, limestone, reefs |
| slope and deep sea | turbidites (graded greywacke), pelagic ooze, chert, red clay |
A facies is a body of rock with distinctive characteristics (lithology, structures, fossils) that reflect its environment. Walther’s law: in a conformable succession, only facies that were laterally adjacent in the environment can be stacked vertically; a vertical sequence records the lateral shift of environments, as in a prograding delta or a transgressing shoreline.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Eluviation (removal, E horizon) | Illuviation (accumulation, B horizon) | |
| Khadar (new alluvium, floodplains) | Bhangar (old alluvium, terraces, kankar) | |
| Conglomerate (rounded clasts) | Breccia (angular clasts) | |
| Shale (fissile) | Mudstone (not fissile); Dunham “mudstone” is a carbonate term | |
| Arenite (under 15% matrix) | Wacke (15–75% matrix) | |
| Roundness (corner sharpness) | Sphericity (overall shape) | |
| Symmetrical ripples (waves) | Asymmetrical ripples (currents) | |
| Kaolinite 1:1, non-swelling, low CEC | Smectite 2:1, swelling, high CEC | |
| Textural maturity (sorting, rounding, matrix) | Compositional maturity (quartz content) |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- In which horizon do clay and iron oxides accumulate by illuviation?
- What is the phi value of a 0.25 mm grain?
- Name the dominant clay mineral of black cotton soil.
Answers
- The B horizon.
- \( \phi = -\log_2 0.25 = \mathbf{2} \) (boundary between medium and fine sand).
- Smectite (montmorillonite).
Level 2: Part B Style
Practice Q1. A sandstone has 5% clay matrix; its framework grains are 70% quartz, 28% feldspar and 2% rock fragments. It is best called:
(a) quartz arenite (b) arkose (c) lithic wacke (d) greywacke
Answer: (b) arkose
Matrix is below 15%, so it is an arenite. Feldspar is above 25% of the framework, so it is an arkose (arkosic arenite). It is not a quartz arenite (needs above 95% quartz), and not a wacke (too little matrix).
Practice Q2. Which soil-forming process gives a bleached E horizon over an Fe–Al–humus B horizon under coniferous forest in a cool humid climate?
(a) laterisation (b) calcification (c) podzolisation (d) salinisation
Answer: (c) podzolisation
Acid organic compounds from conifer litter chelate Fe and Al and move them down, bleaching the E horizon and enriching the B horizon (Spodosols).
Practice Q3. A carbonate rock is grain-supported, made mostly of ooids, and has no lime mud between grains, only sparry calcite cement. In the Dunham and Folk schemes it is:
(a) wackestone; oomicrite (b) packstone; oosparite (c) grainstone; oosparite (d) boundstone; biolithite
Answer: (c) grainstone; oosparite
Grain-supported with no mud is a grainstone (Dunham). Ooids with spar cement is oosparite (Folk). A packstone would contain mud between the grains.
Practice Q4. Which sedimentary structure does not by itself indicate which way was up in a vertical bed?
(a) mud cracks (b) graded bedding (c) parallel lamination (d) truncated cross-bedding
Answer: (c) parallel lamination
Parallel laminae look the same either way up. Mud cracks taper downward, graded beds fine upward and cross-beds are truncated at the top and tangential at the base.
Level 3: Part C Style
Practice Q5. Grain-size analysis of three sands gives:
| Sample | \( \phi_5 \) | \( \phi_{16} \) | \( \phi_{50} \) | \( \phi_{84} \) | \( \phi_{95} \) |
|---|---|---|---|---|---|
| X | 0.8 | 1.2 | 2.0 | 2.6 | 3.1 |
| Y | 1.6 | 1.8 | 2.1 | 2.4 | 2.6 |
| Z | −3.0 | −1.5 | 1.0 | 3.5 | 5.0 |
Which statements are correct?
- X is a moderately well sorted medium sand.
- Y is very well sorted and is the most likely to be an aeolian dune sand.
- Z is very poorly sorted and could be a debris-flow or glacial deposit.
- The graphic mean of Z is coarser than that of X.
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (d) 1, 2, 3 and 4
- X: \( M_z = 1.93\,\phi \) (medium sand), \( \sigma_I = 0.35 + 0.35 = 0.70 \): moderately well sorted. True.
- Y: \( \sigma_I = (2.4 - 1.8)/4 + (2.6 - 1.6)/6.6 = 0.15 + 0.15 = 0.30 \): very well sorted, fine sand (\( M_z = 2.1\,\phi \)), as in dunes. True.
- Z: \( \sigma_I = (3.5 + 1.5)/4 + (5.0 + 3.0)/6.6 = 1.25 + 1.21 = 2.46 \): very poorly sorted. True.
- Z: \( M_z = (-1.5 + 1.0 + 3.5)/3 = 1.0\,\phi \), coarser than X’s 1.93 \( \phi \) (smaller \( \phi \) = coarser). True.
Practice Q6. A 1,000 m thick mud layer is deposited with porosity 0.60. Its porosity follows \( \phi = 0.60\,e^{-0.5z} \) with \( z \) in km. Which statements are correct?
- At 3 km depth its porosity is about 13%.
- Porosity falls to 0.20 at about 2.2 km depth.
- When its porosity has fallen to 0.20, the layer is about 500 m thick.
- Compaction conserves pore volume.
(a) 1, 2 and 3 only (b) 1 and 3 only (c) 2 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- 1 true: \( 0.60\,e^{-1.5} = 0.134 \).
- 2 true: \( z = \ln(0.60/0.20)/0.5 = 2\ln 3 = 2.20 \) km.
- 3 true: solids \( 1000\times 0.40 = 400 \) m; \( 400/0.80 = 500 \) m.
- 4 false: pore volume is expelled (as water); the solid volume is conserved.
Practice Q7. Calcite (\( \text{CaCO}_3 \), 100.09 g mol\(^{-1}\), density 2.71 g cm\(^{-3}\)) is replaced by dolomite (\( \text{CaMg(CO}_3)_2 \), 184.40 g mol\(^{-1}\), density 2.86 g cm\(^{-3}\)) according to \( 2\text{CaCO}_3 + \text{Mg}^{2+} \to \text{CaMg(CO}_3)_2 + \text{Ca}^{2+} \). The percentage reduction in solid volume is closest to:
(a) 4% (b) 8% (c) 13% (d) 25%
Answer: (c) 13%
Molar volume of calcite \( = 100.09/2.71 = 36.93 \) cm\(^3\); two moles occupy 73.87 cm\(^3\).
Molar volume of dolomite \( = 184.40/2.86 = 64.48 \) cm\(^3\).
Reduction \( = 1 - 64.48/73.87 = 0.127 \), about 13%. If the rock keeps its external volume, this space becomes new porosity, one reason dolostones make good reservoirs.
Quick Revision Table
| Idea | Fact or formula |
|---|---|
| CLORPT | climate, organisms, relief, parent material, time |
| Horizons | O, A (eluviation), E (bleached), B (illuviation), C, R |
| Processes | podzolisation (cool humid), laterisation (hot humid), calcification (semi-arid), salinisation (arid), gleying (waterlogged) |
| Clays | kaolinite 1:1 low CEC; illite 2:1 K; smectite 2:1 swelling high CEC |
| Indian soils | alluvial (khadar, bhangar), black (regur), red and yellow, laterite, arid, saline–alkaline, peaty, forest–mountain |
| USDA | 12 orders; Vertisols = black soil; Oxisols = laterite; Spodosols = podzol |
| Wentworth | 256, 64, 4, 2, 1/16, 1/256 mm |
| Phi | \( \phi = -\log_2 d \) |
| Folk–Ward | \( M_z = (\phi_{16} + \phi_{50} + \phi_{84})/3 \); \( \sigma_I = (\phi_{84} - \phi_{16})/4 + (\phi_{95} - \phi_5)/6.6 \) |
| Sandstone | arenite under 15% matrix; quartz arenite above 95% Q; arkose above 25% F; wacke 15–75% matrix |
| Dunham | mudstone, wackestone, packstone, grainstone, boundstone |
| Athy | \( \phi = \phi_0 e^{-cz} \); solids conserved |
| Dolomitisation | about 12–13% volume loss |
| Evaporite order | carbonate, gypsum (about 80% evaporated), halite (about 90%), K–Mg salts |
| Coal rank | peat, lignite, sub-bituminous, bituminous, anthracite |
| Way up | cross-bed truncation, grading, mud cracks, load casts, flames |
| Walther’s law | vertical succession = laterally adjacent environments |
Key Takeaways
What’s Next
- Energy Balance of Surface Processes: the energy that drives weathering, soil formation and sediment transport.
- Physiography and River Basins of India: the plains, plateaus and deltas where these soils and sediments lie.
- Ecosystem Ecology and Human Impacts: soils as part of nutrient cycles.
- Earth Materials, Surface Features and Processes: Quick Revision.