Skip to content

Ore-Forming Processes and Metallogeny

CSIR NET Earth Sciences Part C: magmatic, hydrothermal, sedimentary, placer, residual and supergene ores, deposit models, R factor and metallogeny.

  • 24 min read
  • Updated
On this page · 15 sections
  1. Prerequisites
  2. The Hook: Watching an Ore Deposit Form
  3. The Language of Ore Deposits
  4. Classifying Ore-Forming Processes
  5. Magmatic Ore Deposits
  6. Hydrothermal Ore Deposits
  7. Sedimentary, Placer and Weathering-Related Deposits
  8. Metallogeny
  9. Memory Tricks
  10. Don’t Confuse
  11. Common Mistakes
  12. Practice
  13. Quick Revision Table
  14. Key Takeaways
  15. What’s Next

Prerequisites

The Hook: Watching an Ore Deposit Form

The Language of Ore Deposits

TermMeaning
Orerock from which a metal or mineral can be extracted at a profit; an economic, not a geological, term
Ganguethe worthless minerals that accompany ore minerals (quartz, calcite, barite, fluorite, chlorite)
Gradeconcentration of the valuable component (% for base metals, g/t for gold, ppm for rare metals)
Cut-off gradelowest grade that can be mined and processed at a profit
Concentration factorgrade in ore divided by average crustal abundance
Protoremineralised rock too low in grade to mine until enriched (for example by supergene processes)
Syngeneticore formed at the same time as the host rock (chromitite layer, banded iron formation, VMS lens)
Epigeneticore introduced into a pre-existing rock (veins, replacement bodies, MVT)
Hypogeneformed by ascending, usually hot fluids or magmas
Supergeneformed by descending meteoric water near the surface
Stratabound / stratiformconfined to one stratigraphic unit / parallel to bedding

The concentration factor tells you how much work nature had to do:

$$\boxed{\text{CF} = \frac{\text{grade of mineable ore}}{\text{average crustal abundance}}}$$

Iron and aluminium are already abundant, so a factor below about 10 makes ore. Copper needs a factor of the order of 100; lead and gold need factors of the order of a thousand or more. Scarce metals therefore need unusually efficient processes, which is why gold and lead deposits are rarer than iron deposits.

Classifying Ore-Forming Processes

Textbooks (Evans; Guilbert and Park; Robb) differ in detail, but all group processes by the carrier and the place of deposition:

FamilyProcessTypical deposits
Magmatic (orthomagmatic)fractional crystallisation and crystal accumulationchromitite layers and pods, Fe–Ti–V magnetite layers
liquid immiscibility (sulfide or oxide melt separates)Ni–Cu–PGE sulfides
late-magmatic differentiationpegmatites (Li, Be, Ta, Nb, Sn, Cs), carbonatites (REE, Nb, P)
magma as a carrier of xenocrystsdiamonds in kimberlite and lamproite
Hydrothermalhot aqueous fluids dissolve, carry and precipitate metalsporphyry, skarn, epithermal, VMS, SEDEX, MVT, orogenic gold, IOCG, greisen Sn–W
Sedimentary (chemical)precipitation from seawater or lake waterbanded iron formation, oolitic ironstone, Mn deposits, phosphorite, evaporites
Placer (mechanical)sorting of heavy, resistant minerals by moving water or windgold, cassiterite, ilmenite, rutile, zircon, monazite, diamond
Residualremoval of soluble components by weatheringbauxite, lateritic Ni, lateritic Fe and Mn
Supergene enrichmentmetals leached near the surface and reprecipitated at the water tablechalcocite blankets over porphyry and massive sulfide deposits
Metamorphicrecrystallisation and remobilisationgraphite, sillimanite, kyanite, garnet; remobilised sulfides
graph LR
    S[Source
magma, crust, sediment,
seawater] --> T[Transport
melt, brine, groundwater,
rivers] T --> D[Deposition trap
cooling, boiling, mixing,
wall-rock reaction, sorting] D --> P[Preservation
burial, no erosion] P --> O[Ore body found today]

Magmatic Ore Deposits

Fractional crystallisation and crystal accumulation

Early-crystallising dense oxides such as chromite \( (\text{FeCr}_2\text{O}_4) \) and magnetite settle or accumulate on the floor of a magma chamber. In large layered mafic–ultramafic intrusions this gives laterally continuous chromitite seams (stratiform chromite). In ophiolites, chromite forms irregular podiform bodies in mantle harzburgite and dunite.

TypeSettingExamples
Stratiform chromitelayered intrusions in stable cratonsBushveld (South Africa), Great Dyke (Zimbabwe); in India, Sukinda and Nuasahi (Odisha) are ultramafic-hosted chromite belts
Podiform chromiteophiolite mantle sectionsOman, Cyprus (Troodos); in India, the ophiolites of Manipur–Nagaland and Andaman carry small bodies
Fe–Ti–V magnetiteupper parts of layered intrusions, anorthosite massifsBushveld upper zone (vanadium)

Chromite crystallises alone, rather than with olivine, when the magma composition is pushed into the chromite field. Mixing a fresh, primitive magma into a fractionated one, or contaminating it with silica-rich crust, does this, which is why chromitite seams are thin and sharp.

Liquid immiscibility: Ni–Cu–PGE sulfides

When a mafic or ultramafic magma becomes saturated in sulfur, droplets of an immiscible sulfide liquid separate. Chalcophile and siderophile metals (Ni, Cu, Co, the platinum-group elements) partition strongly into the sulfide. The droplets are dense and collect at the base of flows and intrusions.

Sulfur saturation is triggered by: assimilation of sulfur-rich country rock (black shale, evaporite), assimilation of silica (which lowers sulfur solubility), cooling and fractionation, and magma mixing.

Examples: Noril’sk–Talnakh (Siberian Traps feeders), Sudbury (Ontario; impact melt sheet, about 1.85 Ga), Kambalda (Western Australia; komatiite flows), the Merensky Reef and UG2 of the Bushveld (PGE).

The R factor. How rich the sulfide becomes depends on how much silicate magma each unit of sulfide has met. With \( R \) the mass ratio of silicate magma to sulfide liquid, \( D \) the sulfide/silicate partition coefficient and \( C_L \) the metal concentration in the original magma, mass balance gives (Campbell and Naldrett):

$$\boxed{C_{\text{sul}} = \frac{C_L\, D\,(R + 1)}{R + D}}$$
LimitResultMeaning
\( R \gg D \)\( C_{\text{sul}} \to C_L D \)sulfide fully equilibrated; grade set by \( D \)
\( R \ll D \)\( C_{\text{sul}} \to C_L (R + 1) \)sulfide starved of magma; grade set by \( R \)

For Cu (\( D \) of the order of \( 10^3 \)) moderate \( R \) is enough; for PGE (\( D \) of \( 10^4 \) or more) only very high \( R \) gives a rich reef. This is why PGE-rich reefs such as the Merensky Reef are thin sulfide-poor layers that saw huge volumes of magma.

Pegmatites, carbonatites and kimberlites

  • Pegmatites are very coarse-grained, the last water-rich residue of granite crystallisation. Incompatible elements concentrate there: Li (spodumene, lepidolite), Be (beryl), Nb–Ta (columbite–tantalite), Sn (cassiterite), Cs (pollucite), plus mica and feldspar. Two families are used: LCT (lithium–caesium–tantalum, from peraluminous S-type granites) and NYF (niobium–yttrium–fluorine, from A-type granites).
  • Carbonatites are igneous carbonate rocks of alkaline complexes in rifts. They host REE (bastnäsite, monazite), Nb (pyrochlore), phosphate (apatite) and vermiculite. Indian examples include Amba Dongar (Gujarat, fluorite) and the Sung Valley complex (Meghalaya).
  • Kimberlites and lamproites do not form diamonds. They are fast-rising volatile-rich magmas that sample diamond-bearing mantle below about 150 km (lithospheric keels of old cratons) and carry diamonds up as xenocrysts. Clifford’s rule: economic kimberlites lie on Archean cratons.

Hydrothermal Ore Deposits

Most base-metal and gold deposits are hydrothermal. Three questions decide the deposit: where the water came from, how it carried the metal, and why it let go.

Sources of hydrothermal fluid

FluidOriginTypical signature
Magmatic waterexsolved from crystallising magmahigh T (400–700 °C), often saline; \( \delta^{18}\text{O} \) about +5.5 to +10‰
Meteoric waterrain and groundwater that circulates to depthlow salinity; \( \delta\text{D} \) and \( \delta^{18}\text{O} \) on the meteoric water line
Seawaterconvected through oceanic crustmoderate salinity (about 3.5 wt% NaCl eq), \( \delta^{18}\text{O} \) near 0‰
Basinal brine (connate / formation water)pore water of sedimentary basins, evolved by evaporite dissolutionhigh salinity (often 10–30 wt%), low T (about 50–250 °C)
Metamorphic waterreleased by devolatilisation during prograde metamorphismlow salinity, \( \text{H}_2\text{O}\text{–CO}_2 \) rich, moderate T

How these signatures are measured (fluid inclusions, stable isotopes) is the subject of Ore Microscopy, Fluid Inclusions and Isotopes.

How metals travel: complexes

Free metal ions are almost insoluble in natural fluids. Metals travel as complexes with ligands. The hard–soft acid–base (HSAB) principle predicts which:

LigandHard or softMetals it carriesFavoured when
\( \text{Cl}^- \)borderline-hardCu, Zn, Pb, Fe, Ag, Sn (as chloride complexes such as \( \text{ZnCl}_4^{2-} \))high T, high salinity, acidic, oxidised
\( \text{HS}^- \)softAu (\( \text{Au(HS)}_2^- \)), also Ag, Hg, As, Sblower T (below about 350 °C), near-neutral pH, reduced, sulfur-rich
\( \text{OH}^- \), \( \text{F}^- \), \( \text{CO}_3^{2-} \)hardW, Mo, Sn, REE, U(VI)specialised fluids (greisens, carbonatites, uranyl carbonate in groundwater)

Key consequence. A chloride brine can carry a lot of Cu, Pb and Zn but almost no reduced sulfur at the same time, otherwise sulfides would precipitate on the spot. Gold, as a bisulfide complex, travels with sulfur.

Why metals precipitate

MechanismWhat happensTypical deposit
Coolingsolubility of chloride complexes falls steeply with Tporphyry, skarn, veins
Boiling (phase separation)\( \text{H}_2\text{S} \) and \( \text{CO}_2 \) partition into vapour; pH rises; \( \text{Au(HS)}_2^- \) breaks downepithermal gold–silver veins (bonanza zones at the boiling level)
Fluid mixinghot metal-rich brine meets cold, sulfide-bearing or oxidised waterVMS (vent fluid meets seawater), MVT (brine meets \( \text{H}_2\text{S} \))
Wall-rock reactionacid fluid neutralised by carbonate; reduction by graphite; sulfidation of Fe-rich rockskarn, carbonate replacement; orogenic gold in Fe-rich rocks (BIF, dolerite)
Pressure dropfault-valve behaviour: rupture, flash boiling, quartz–gold depositionorogenic gold quartz veins

For gold in bisulfide, the controlling reaction is:

$$\text{Au(HS)}_2^- + \text{H}^+ + \tfrac{1}{2}\text{H}_2 \rightleftharpoons \text{Au} + 2\,\text{H}_2\text{S}$$

Anything that removes \( \text{H}_2\text{S} \) (boiling, sulfidation of iron in wall rocks to pyrite) or changes the redox state drives it to the right.

Hydrothermal alteration

Fluids that are out of equilibrium with their wall rocks alter them. Alteration halos are wider than the ore and are the main exploration guide.

AlterationKey mineralsFluid character
PotassicK-feldspar, biotite, magnetitehigh T, magmatic, near-neutral
Phyllic (sericitic)quartz, sericite, pyrite (QSP)moderate T, acidic
Argillickaolinite, montmorillonite (smectite)lower T, acidic
Advanced argillicalunite, pyrophyllite, dickite, kaolinite, vuggy silicastrongly acidic, often magmatic vapour condensate
Propyliticchlorite, epidote, calcite, albitelow intensity, near-neutral, outer halo
Skarn (calc-silicate)garnet, pyroxene; later amphibole, epidoteintrusion against carbonate
Greisenquartz, muscovite, topaz, fluoriteF-rich fluid in granite cupolas (Sn, W)

Porphyry zoning. In the classic Lowell–Guilbert model (1970) for porphyry copper deposits, alteration is concentric around the intrusion: a potassic core, then a phyllic shell, then argillic, and an outer propylitic halo. Ore (chalcopyrite, bornite, molybdenite) is concentrated at the potassic–phyllic boundary, with a pyrite halo outside it.

graph LR
    A[Potassic core
K-feldspar, biotite] --> B[Phyllic
quartz-sericite-pyrite] B --> C[Argillic
kaolinite, smectite] C --> D[Propylitic halo
chlorite, epidote, calcite] A -. ore shell at boundary .- B

Main hydrothermal deposit models

ModelSettingHost / fluidMetalsHallmarksExamples
Porphyrysubduction arcs (continental and island)calc-alkaline, oxidised I-type intrusions; magmatic fluidCu, Mo, Aularge low-grade stockworks; concentric alteration; supergene blanketChuquicamata, Escondida (Chile), Bingham (USA)
Skarnintrusion against carbonatemagmatic fluid + limestoneW, Cu, Fe, Zn–Pb, Mo, Sn, Auprograde garnet–pyroxene, retrograde amphibole–epidotemany arc and collisional settings
Epithermal, high-sulfidationabove porphyry systems in arcsacidic magmatic vapour condensateAu, Cu, Agenargite, vuggy silica, alunite, advanced argillic
Epithermal, low-sulfidationarcs, back-arcs, riftsnear-neutral, dilute meteoric-dominated fluidAu, Agadularia–sericite, colloform–crustiform banded quartz, bladed calcite (boiling)
VMS (volcanogenic massive sulfide)seafloor: mid-ocean ridges, back-arcs, arcsconvecting seawater in volcanic rocksCu, Zn, Pb, Ag, Aumound-shaped lens over a stockwork (stringer) feeder; Cu at the base, Zn–Pb at the topCyprus (Troodos), Kuroko (Japan), Kidd Creek (Canada)
SEDEX (sedimentary exhalative)intracontinental rifts, passive marginsbasinal brine vented on the seafloor into a reduced basinZn, Pb, Ag (minor Cu)finely laminated, stratiform sulfides in shale; no direct volcanic linkSullivan, Red Dog, Mount Isa, Broken Hill; Rampura-Agucha (Rajasthan)
MVT (Mississippi Valley type)carbonate platforms of foreland basinsbasinal brine, 75–200 °C, no igneous linkZn, Pb (barite, fluorite)epigenetic replacement and open-space filling in dolostone; sphalerite, galenaMississippi Valley districts (USA), Pine Point (Canada)
Orogenic goldcollisional and accretionary orogens; greenstone beltslow-salinity \( \text{H}_2\text{O–CO}_2 \) fluid, mostly metamorphicAu (As, W, Te)quartz–carbonate veins in shear zones; carbonate–sericite–pyrite alterationKalgoorlie (Australia); Kolar, Hutti (Karnataka)
IOCG (iron oxide–copper–gold)cratonic margins, extensionalsaline, oxidised fluidFe (magnetite, hematite), Cu, Au, U, REElarge breccia bodies, abundant Fe oxide, low sulfideOlympic Dam (Australia)
Carlin-typeextended continental marginlow-T fluid in carbonaceous silty carbonatesAu (invisible, in arsenian pyrite)decarbonatisation, silicification (jasperoid)Carlin trend (Nevada)
Greisen / granite-related Sn–Wcollisional S-type granitesF-rich magmatic fluidSn, W, Mo, Bicupolas, quartz–topaz–muscoviteCornwall (UK)

VMS subtypes. Cyprus type (Cu–Zn, in mafic ophiolite basalt at mid-ocean ridges), Besshi type (Cu–Zn, in mixed basalt and pelitic sediment) and Kuroko type (Zn–Pb–Cu–Ag–Au, in bimodal felsic volcanics of arcs and back-arcs). The felsic-associated types are richer in Pb, because felsic rocks contain more Pb.

VMS zoning. In a VMS lens, chalcopyrite dominates the hot base and stockwork; sphalerite, galena and barite dominate the cooler top and margins. The same zoning is seen in active black-smoker chimneys, where chalcopyrite lines the hot inner conduit.

Chemical sediments

DepositProcessNotes
Banded iron formation (BIF)alternating Fe-oxide (hematite, magnetite) and chert bands from Fe²⁺-rich seawater oxidised by O₂ (photosynthesis) or other oxidantsAlgoma type: Archean, small, associated with volcanics in greenstone belts. Superior type: Paleoproterozoic, large, on continental shelves (Hamersley, Lake Superior). Rapitan type: Neoproterozoic, associated with glacial deposits
Oolitic ironstonePhanerozoic shallow-marine oolites of goethite, chamosite, sideriteMinette (Lorraine), Clinton (USA) types
Sedimentary manganeseprecipitated from oxygenated water at basin margins; later metamorphosedin India metamorphosed to gondite (spessartine–quartz rock) in the Sausar Group
Phosphoriteupwelling of nutrient-rich water on continental marginsin India, Proterozoic stromatolitic phosphorite at Jhamarkotra (Rajasthan)
Evaporitesevaporation of restricted seawater: carbonate → gypsum/anhydrite → halite → K–Mg salts

BIF needs dissolved \( \text{Fe}^{2+} \), which can only accumulate in anoxic deep water. The peak of BIF deposition before about 1.8 Ga and its decline thereafter tracks the oxygenation of the atmosphere and oceans.

Placers

Placers are mechanical concentrations of minerals that are dense, chemically resistant and hard: gold, cassiterite, ilmenite, rutile, zircon, monazite, garnet, diamond. Moving water sorts grains by settling velocity, so dense small grains end up with larger light grains (hydraulic equivalence).

TypeTrapExamples
Alluvial (fluvial)inner bends, bedrock riffles, base of channel gravelsalluvial gold and tin
Beach (strandline)swash zone, storm berms; winnowing by wavesilmenite–rutile–zircon–monazite–sillimanite–garnet sands of Chavara (Kerala), Manavalakurichi (Tamil Nadu), Chatrapur (Odisha)
Eluvialresidual concentration on slopes above the source
Palaeoplacerlithified ancient placerWitwatersrand gold–uranium conglomerates (South Africa)

The Witwatersrand conglomerates contain detrital uraninite and pyrite, rounded by transport. Both are unstable in oxygenated water, which is one of the classic arguments that the Archean atmosphere was low in oxygen.

Residual deposits and supergene enrichment

Under hot, humid climates, intense chemical weathering (laterisation) removes silica and alkalis and leaves insoluble Al, Fe, Ni and Mn behind.

  • Bauxite (gibbsite, boehmite, diaspore) over aluminous rocks; in India, the East Coast bauxites over khondalite of the Eastern Ghats (Panchpatmali, Odisha) and laterite caps over Deccan basalt.
  • Lateritic nickel over ultramafic rocks: Ni released from olivine is fixed in goethite (limonitic ore) and in hydrous Mg–Ni silicates (garnierite, saprolite ore). Sukinda (Odisha) carries nickeliferous laterite over ultramafics.

Supergene enrichment works on sulfide bodies. Above the water table, oxygenated water oxidises pyrite to sulfuric acid and ferric sulfate, which dissolve copper:

$$\text{CuFeS}_2 + 4\,\text{O}_2 \rightarrow \text{Cu}^{2+} + \text{Fe}^{2+} + 2\,\text{SO}_4^{2-}$$

The dissolved Cu moves down to the reducing zone at the water table and replaces primary sulfides:

$$\text{Cu}^{2+} + \text{CuFeS}_2 \rightarrow \text{2 CuS (covellite)} + \text{Fe}^{2+} \quad\text{and further to } \text{Cu}_2\text{S (chalcocite)}$$
Zone (top to bottom)Content
Gossan (leached cap)limonite, goethite, hematite, jarosite boxworks; metal leached
Oxidised zonemalachite, azurite, cuprite, native copper, chrysocolla
Water table
Supergene enrichment blanketchalcocite, covellite; grade can be several times the primary ore
Hypogene (primary) zonechalcopyrite, pyrite, bornite

The amount of pyrite matters: without enough acid-producing pyrite, copper is fixed in the oxide zone and no blanket forms.

Metamorphic deposits

Metamorphism makes industrial minerals in situ (graphite from organic matter, sillimanite and kyanite from aluminous pelites, garnet, wollastonite) and remobilises existing ores into fold hinges and shear zones. It also releases the \( \text{H}_2\text{O–CO}_2 \) fluid of orogenic gold deposits.

Metallogeny

Metallogeny is the study of ore deposits in space and time, in relation to the geological evolution of a region. Its units:

TermMeaning
Metallogenic provincea region with a characteristic group of deposits, for example the tin–tungsten province of SE Asia
Metallogenic epocha time interval favourable for a type of deposit, for example Paleoproterozoic BIF
Metallogenic beltan elongate zone, usually following an orogen or arc, for example the Andean porphyry belt

Deposits and plate-tectonic setting

SettingCharacteristic deposits
Mid-ocean ridgeCyprus-type VMS; podiform chromite (preserved in ophiolites)
Subduction: continental and island arcsporphyry Cu–Mo–Au, skarns, high- and low-sulfidation epithermal Au–Ag
Back-arc basinKuroko-type VMS
Continental collisionSn–W greisens and veins in S-type granites; orogenic gold; LCT pegmatites
Intracontinental riftSEDEX Pb–Zn, carbonatite REE–Nb, rift-related Cu (sediment-hosted)
Passive margin and foreland basinMVT Pb–Zn, phosphorites, evaporites, placers
Stable craton and plumelayered intrusions (Cr, PGE, Ni), kimberlite diamonds, flood-basalt Ni–Cu (Noril’sk)

Deposits through time

IntervalTypical depositsWhy then
Archeangreenstone orogenic gold, komatiite Ni, Algoma BIF, early VMS, Witwatersrand Au–U palaeoplacershotter mantle (komatiites), small plates, low atmospheric O₂ (detrital uraninite, pyrite)
PaleoproterozoicSuperior-type BIF peak, Bushveld (about 2.05 Ga) Cr–PGE–V, Sudbury (about 1.85 Ga) Ni–Cu, unconformity Uoxygenation of ocean–atmosphere; large stable cratons
Late Paleoproterozoic to Mesoproterozoicgiant SEDEX Pb–Zn (Broken Hill and Mount Isa about 1.7–1.65 Ga; Sullivan about 1.47 Ga), IOCG (Olympic Dam about 1.59 Ga)oxidised, sulfate-bearing basinal brines; supercontinent rifting
NeoproterozoicRapitan-type BIF, sediment-hosted CuSnowball Earth glaciations
Phanerozoicporphyry and epithermal deposits, MVT, Carlin, oolitic ironstones, most coal and petroleumyoung arcs still preserved; land plants (coal)

The secular pattern has two causes: real changes in Earth (mantle temperature, atmospheric oxygen, life) and selective preservation (shallow deposits erode).

Metallogenic provinces of India

Craton or beltMain deposits
Dharwar craton (Karnataka, AP)orogenic gold (Kolar, Hutti, Ramagiri); BIF-hosted Fe (Bababudan, Kudremukh, Bellary–Hospet); Mn (Sandur); chromite (Nuggihalli, Byrapur)
Singhbhum craton (Jharkhand, Odisha)Iron Ore Group hematite (Noamundi, Kiriburu, Joda–Barbil); chromite (Sukinda, Nuasahi, with PGE at Nuasahi); Singhbhum Shear Zone Cu (Mosabani, Rakha) and U (Jaduguda)
Bastar craton (Chhattisgarh)Bailadila and Dalli–Rajhara iron ore; tin pegmatites
Aravalli–Delhi belt (Rajasthan, Gujarat)Pb–Zn–Ag (Rampura-Agucha, Zawar, Rajpura-Dariba, Sindesar Khurd); Cu (Khetri belt); W (Degana); phosphorite (Jhamarkotra)
Central Indian belts (MP, Maharashtra)Malanjkhand Cu–Mo; Sausar Group Mn; Panna diamonds
Eastern Ghatsbauxite over khondalite; Mn (gondite and kodurite)
Cuddapah basinMangampet barite; Tummalapalle uranium
Coastal strandlinesheavy mineral sands (ilmenite, rutile, zircon, monazite, sillimanite, garnet)

The details of these deposits are in Ferrous, Base and Noble Metal Deposits.

Memory Tricks

Don’t Confuse

ThisNot this
Syngenetic: formed with the host (BIF, VMS lens, chromitite)Epigenetic: introduced later (veins, MVT, skarn)
Hypogene: ascending, hot fluidSupergene: descending meteoric water, near surface
SEDEX: shale-hosted, laminated, vent-proximal, rift basinsMVT: carbonate-hosted, replacement and cavity fill, foreland platforms
VMS: volcanic host, seawater convection, Cu-bearingSEDEX: sedimentary host, basinal brine, Cu-poor
Porphyry: large, low-grade, potassic core, deeper (1–5 km)Epithermal: small, high-grade veins, shallow (under about 1.5 km), boiling textures
High-sulfidation epithermal: acid, enargite, alunite, vuggy silicaLow-sulfidation epithermal: near-neutral, adularia, banded quartz
Stratiform chromite: layered intrusion, continuous seamsPodiform chromite: ophiolite mantle, irregular pods
Residual concentration: the ore mineral stays put (bauxite)Supergene enrichment: the metal is dissolved and moved down (chalcocite)

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Name the ligand that carries gold in most hydrothermal fluids below about 350 °C.
  2. What is the innermost alteration zone of a classic porphyry copper deposit?
  3. Which deposit type is characterised by detrital uraninite and pyrite in quartz-pebble conglomerates?
Answers
  1. Bisulfide (\( \text{HS}^- \)), as \( \text{Au(HS)}_2^- \).
  2. Potassic alteration (K-feldspar, biotite).
  3. Palaeoplacer gold–uranium deposits, type example Witwatersrand.

Level 2: Part B Style

Practice Q1. A stratiform, finely laminated Zn–Pb–Ag sulfide body in carbonaceous shale of an intracontinental rift basin, with no volcanic rocks nearby, is best classified as:

(a) VMS (b) SEDEX (c) MVT (d) Skarn

Answer: (b) SEDEX

Laminated, bedding-parallel sulfides in shale with no volcanic association point to exhalation of basinal brine onto the floor of a reduced rift basin: SEDEX. VMS needs a volcanic host; MVT is epigenetic in carbonate; skarn needs an intrusion against carbonate.

Practice Q2. Which assemblage indicates advanced argillic alteration?

(a) K-feldspar–biotite–magnetite (b) quartz–sericite–pyrite (c) alunite–pyrophyllite–dickite (d) chlorite–epidote–calcite

Answer: (c)

Alunite, pyrophyllite and dickite form only in strongly acidic fluids: advanced argillic. (a) is potassic, (b) phyllic, (d) propylitic.

Practice Q3. Average crustal Cu is taken as 50 ppm. The concentration factor needed to make an ore of 0.5% Cu is:

(a) 10 (b) 100 (c) 1,000 (d) 10,000

Answer: (b) 100

0.5% = 5,000 ppm. CF = 5,000/50 = 100. Option (c) comes from treating 0.5% as 50,000 ppm.

Practice Q4. In a supergene profile over a porphyry copper deposit, chalcocite is most abundant:

(a) in the gossan (b) in the oxidised zone above the water table (c) at and just below the water table (d) at the base of the hypogene zone

Answer: (c)

Copper leached from above is reprecipitated where descending acid, oxidised water reaches reducing conditions, at and just below the water table. This is the enrichment blanket of chalcocite and covellite.

Level 3: Part C Style

Practice Q5. A mafic magma contains 10 ppb Pt. The sulfide/silicate partition coefficient for Pt is \( 10^4 \). The Pt content of the sulfide when the magma/sulfide mass ratio \( R \) is \( 10^3 \), and the ratio of this tenor to that at \( R = 10^5 \), are closest to:

(a) 9.1 ppm; 0.10 (b) 10 ppm; 0.10 (c) 9.1 ppm; 0.91 (d) 100 ppm; 1.0

Answer: (a) 9.1 ppm; 0.10

\( C_{\text{sul}} = C_L D (R+1)/(R + D) \).

  • \( R = 10^3 \): \( 10 \times 10^4 \times 1{,}001/11{,}000 = 9{,}100 \) ppb = 9.1 ppm.
  • \( R = 10^5 \): \( 10 \times 10^4 \times 100{,}001/110{,}000 = 90{,}910 \) ppb, about 91 ppm.

Ratio \( 9.1/90.9 \approx \) 0.10. Option (d) is the full-equilibrium limit \( C_L D = 100 \) ppm, reached only when \( R \gg D \).

Practice Q6. A SEDEX body contains 1 Mt of Zn. The ore fluid carried 10 ppm Zn, and 50% of the Zn was precipitated at the vent. If the system was active for 1 Myr, the average fluid discharge was closest to:

(a) \( 2\times 10^{3} \) t yr\(^{-1}\) (b) \( 2\times 10^{5} \) t yr\(^{-1}\) (c) \( 2\times 10^{7} \) t yr\(^{-1}\) (d) \( 2\times 10^{11} \) t yr\(^{-1}\)

Answer: (b)

Zn deposited per tonne of fluid: \( 10\times 10^{-6} \times 0.5 = 5\times 10^{-6} \) t.

Fluid needed: \( 10^{6}/5\times 10^{-6} = 2\times 10^{11} \) t of fluid.

Over \( 10^{6} \) yr: \( 2\times 10^{5} \) t yr\(^{-1}\), about 6 kg s\(^{-1}\): comparable to a modest spring. Option (d) is the total mass of fluid, not the rate. The calculation shows why giant deposits need long-lived, focused fluid flow.

Practice Q7. Consider these statements about ore-forming fluids:

  1. A hot, saline, oxidised, acidic brine can carry abundant Zn and Pb as chloride complexes.
  2. Boiling of a near-neutral fluid tends to precipitate gold transported as \( \text{Au(HS)}_2^- \).
  3. MVT fluids are typically low-salinity meteoric waters above 400 °C.
  4. In a VMS chimney, chalcopyrite is concentrated in the hottest part of the system.

Which are correct?

(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 4 only
  • 1 true: chloride complexing is strongest at high T and salinity, under acidic, oxidised conditions that keep reduced sulfur low.
  • 2 true: boiling partitions \( \text{H}_2\text{S} \) into the vapour, destabilising the bisulfide complex.
  • 3 false: MVT fluids are saline basinal brines at about 75–200 °C.
  • 4 true: Cu sulfides precipitate at high temperature; Zn–Pb at lower temperature on the outside and top.

Quick Revision Table

IdeaFact
Concentration factorgrade / crustal abundance; under about 10 for Fe, Al; about 100 for Cu; about 1,000 or more for Pb, Au
Magmatic processescrystal accumulation (chromite), liquid immiscibility (Ni–Cu–PGE), pegmatite, carbonatite, kimberlite carrier
R factor\( C_{\text{sul}} = C_L D (R+1)/(R+D) \); high R gives rich PGE reefs
Transportbase metals as \( \text{Cl}^- \) complexes; Au as \( \text{Au(HS)}_2^- \)
Precipitationcooling, boiling, mixing, wall-rock reaction, pressure drop
Porphyry zoningpotassic → phyllic → argillic → propylitic; ore at potassic–phyllic boundary
VMS typesCyprus (mafic), Besshi (mafic + pelite), Kuroko (felsic); Cu at base, Zn–Pb at top
SEDEX vs MVTshale, laminated, syngenetic vs carbonate, epigenetic, 75–200 °C brines
Orogenic goldlow-salinity \( \text{H}_2\text{O–CO}_2 \), shear-zone quartz veins; Kolar, Hutti
BIFAlgoma (Archean, volcanic), Superior (Paleoproterozoic, shelf), Rapitan (Neoproterozoic, glacial)
Supergene profilegossan → oxide zone → water table → chalcocite blanket → hypogene
Metallogenyprovinces, epochs, belts; setting and secular change plus preservation

Key Takeaways

What’s Next