Mineral Resource Exploitation and Conservation
CSIR NET Earth Sciences: ores, grade and cut-off, resources vs reserves, ore-forming processes, mining and beneficiation, acid mine drainage, conservation.
- 17 min
On this page · 17 sections
- Prerequisites
- The Hook: Gold Below, Waste Above
- Basic Vocabulary
- Resources and Reserves
- How Ores Form
- Finding Ore: Exploration
- Getting It Out: Mining Methods
- Processing: Beneficiation and Extraction
- Environmental Impact of Mining
- Conservation of Mineral Resources
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Earth’s bulk and crustal composition and Goldschmidt’s classes from Meteorites, Earth’s Composition and Differentiation.
- Gravity and magnetic anomalies, used in exploration, from Gravity, Geomagnetism, Heat Flow and Isostasy.
- Energy minerals (coal, uranium, thorium) from Energy Resources and the Environmental Impact of Energy and Land Use.
- Percentages, ratios and exponential growth from Numerical Ability.
The Hook: Gold Below, Waste Above
Basic Vocabulary
| Term | Meaning |
|---|---|
| Mineral deposit | a concentration of a mineral or element well above its crustal average |
| Ore | material from which a metal or mineral can be extracted at a profit |
| Ore mineral | the valuable mineral (chalcopyrite, galena, hematite) |
| Gangue | the worthless minerals in an ore (quartz, calcite, feldspar) |
| Grade | concentration of the valuable component (% for base metals, g t\(^{-1}\) for gold) |
| Tonnage | quantity of ore; tonnage × grade = contained metal |
| Cut-off grade | the lowest grade that can be mined and processed without loss |
| Overburden | rock and soil above an ore body that must be removed in surface mining |
| Tailings | finely ground waste left after processing |
Concentration factor
$$\boxed{\text{Concentration factor} = \frac{\text{minimum economic ore grade}}{\text{average crustal abundance}}}$$Taking illustrative crustal averages (estimates differ between compilations):
| Element | Crustal average (taken as) | Typical ore grade | Concentration factor |
|---|---|---|---|
| Aluminium | about 8% | about 32% Al (bauxite) | about 4 |
| Iron | about 5% | about 60% Fe | about 12 |
| Copper | about 0.006% (60 ppm) | about 0.6% | about 100 |
| Gold | about 0.004 g t\(^{-1}\) | about 4 g t\(^{-1}\) | about 1,000 |
Abundant elements (Al, Fe) need little natural enrichment; scarce elements (Cu, Au, Pb, Zn) need large enrichment, which only special geological processes achieve. That is why scarce metals are found in few places.
Resources and Reserves
The McKelvey diagram classifies mineral occurrences along two axes: geological certainty (how well known) and economic feasibility (whether profitable).
| Identified: measured | Identified: indicated | Identified: inferred | Undiscovered: hypothetical, speculative | |
|---|---|---|---|---|
| Economic | Reserve (proved) | Reserve (probable) | inferred reserve | undiscovered resource |
| Marginally economic | marginal reserve | marginal reserve | — | — |
| Sub-economic | sub-economic resource | sub-economic resource | — | — |
- A resource is any concentration of potential economic interest, known or estimated.
- A reserve is the part of an identified resource that can be extracted profitably now with existing technology.
- Reserves change without any geological change: a rise in metal price or a better process converts resources to reserves; a price fall does the reverse.
- India reports its mineral inventory under the United Nations Framework Classification (UNFC), which codes economic viability (E), feasibility (F) and geological knowledge (G).
How long will it last?
Static lifetime = reserves / current annual production. If consumption grows at rate \( r \) per year, the exponential lifetime is
$$\boxed{T = \frac{1}{r}\ln\left(1 + \frac{rR}{P_0}\right)}$$where \( R \) is the reserve and \( P_0 \) the present production. With \( R = 800 \) Mt and \( P_0 = 20 \) Mt yr\(^{-1}\), the static lifetime is 40 yr, but at 3% growth it is \( \ln(2.2)/0.03 \approx 26 \) yr. Growth shortens lifetimes sharply. In practice reserves are also replenished by exploration and price changes, so neither number is a forecast.
Hubbert’s peak. Production of a finite resource in a region tends to rise, peak and decline in a roughly bell-shaped curve, with the peak near the point where about half the ultimately recoverable resource has been produced. M. King Hubbert used this in 1956 to forecast the peak of United States oil production around 1970.
How Ores Form
| Process | Mechanism | Examples (deposit type) | Indian examples |
|---|---|---|---|
| Magmatic | crystal settling and immiscible sulphide liquids in mafic–ultramafic magma | chromite, PGE, Ni–Cu sulphides, diamond (kimberlite) | chromite of the Sukinda valley (Odisha); diamonds at Panna (Madhya Pradesh) |
| Pegmatitic | late, volatile-rich granite melts | mica, Li, Be, Ta, Nb, feldspar | mica of Koderma (Jharkhand) and Nellore (Andhra Pradesh) |
| Hydrothermal | hot aqueous fluids leach, carry and precipitate metals in veins, stockworks and replacements | porphyry Cu–Mo, lode gold, Pb–Zn, Sn–W | copper at Malanjkhand (Madhya Pradesh) and Khetri (Rajasthan); gold at Kolar and Hutti (Karnataka) |
| Sedimentary exhalative and sediment-hosted | metal-bearing brines vented or circulated in sedimentary basins | Pb–Zn | Zawar and Rampura–Agucha (Rajasthan) |
| Volcanogenic massive sulphide (VMS) | sea-floor hydrothermal vents (black smokers) | Cu–Zn–Pb | — |
| Chemical sedimentary | precipitation from sea water | banded iron formations, Mn, phosphorite, evaporites | iron ore of Bailadila (Chhattisgarh), Singhbhum–Keonjhar (Jharkhand–Odisha), Bellary–Hospet (Karnataka); phosphorite of Jhamarkotra (Rajasthan) |
| Residual (weathering) | intense tropical weathering removes soluble elements and leaves insoluble Al, Fe, Ni | bauxite, laterite, Ni-laterite | East Coast bauxite (Panchpatmali, Koraput, Odisha) |
| Supergene enrichment | metals leached from the oxidised upper part of a sulphide body are re-precipitated just below the water table | enriched Cu sulphide blanket | — |
| Placer | heavy, resistant minerals concentrated by moving water or wind | gold, cassiterite, ilmenite, rutile, zircon, monazite, garnet, sillimanite | beach sands of Chavara (Kerala), Manavalakurichi (Tamil Nadu), Chhatrapur (Odisha) |
| Metamorphic | recrystallisation during metamorphism | graphite, sillimanite, kyanite, garnet | — |
Manganese ores of the Balaghat–Nagpur–Bhandara belt (Madhya Pradesh–Maharashtra) and of Odisha are other important Indian deposits.
Supergene profile
From top to bottom: gossan (iron oxide cap, “iron hat”, a prospecting guide), leached (oxidised) zone, supergene enriched zone at and below the water table (Cu grade raised several-fold), and primary (hypogene) ore. The enrichment happens because Cu leached above is re-precipitated by replacing less noble metals in sulphides below.
Finding Ore: Exploration
graph LR
A[Regional: geological maps, remote sensing, airborne geophysics] --> B[Target: geochemical anomalies, ground geophysics]
B --> C[Drilling and sampling]
C --> D[Resource estimation]
D --> E[Feasibility study]
E --> F[Mine development]| Method | What it detects | Good for |
|---|---|---|
| Geological mapping, structural analysis | host rocks, alteration, controls | all deposits |
| Remote sensing | hydrothermal alteration minerals (clays, iron oxides) by spectral signature; lineaments | porphyry and epithermal targets (see Remote Sensing) |
| Geochemical | anomalies in soil, stream sediment, rock, water, plants | dispersed metal haloes around ore |
| Magnetic | magnetic susceptibility | magnetite-rich iron ore, BIF, kimberlite pipes |
| Gravity | density contrast | chromite, massive sulphides, salt domes |
| Electrical and electromagnetic | conductivity | massive sulphides, graphite |
| Induced polarisation (IP) | chargeability | disseminated sulphides (porphyry Cu) |
| Radiometric (gamma-ray) | K, U, Th | uranium, thorium, mapping granites |
Getting It Out: Mining Methods
| Method | When used | Notes |
|---|---|---|
| Open-pit (opencast) | large, near-surface, lower-grade bodies | cheaper per tonne; large waste and land use |
| Strip mining | flat-lying coal, phosphate | overburden cast aside in strips; enables backfilling |
| Quarrying | building stone, limestone | — |
| Placer and dredging | beach and river sands | — |
| Underground (room and pillar, cut and fill, stoping, block caving) | deep or high-grade bodies | higher cost; subsidence risk; less surface disturbance |
| Solution mining, in-situ leaching | uranium, salt, potash | fluids injected and pumped out; groundwater risk |
| Heap leaching | low-grade gold and copper | crushed ore leached on lined pads (cyanide, acid) |
Stripping ratio = waste (overburden) removed / ore mined, in tonnes or volume. A pit is extended until the break-even stripping ratio is reached:
$$\text{BESR} = \frac{\text{value of ore per tonne} - \text{cost of mining and processing the ore per tonne}}{\text{cost of removing a tonne of waste}}$$For ore worth ₹3,000 per tonne, ore costs ₹1,800 per tonne and waste removal ₹200 per tonne: BESR \( = 1{,}200/200 = 6 \).
Cut-off grade
At the break-even cut-off grade, the value of recovered metal just covers the cost:
$$\boxed{g_c = \frac{\text{cost per tonne of ore}}{\text{metal price per tonne}\times\text{recovery}}}$$For costs of ₹1,500 per tonne of ore, copper at ₹6,00,000 per tonne and 90% recovery: \( g_c = 1500/(600000\times 0.9) = 0.0028 \), i.e. about 0.28% Cu. Raising the price or recovery lowers the cut-off and increases reserves.
Processing: Beneficiation and Extraction
Beneficiation (mineral dressing) raises grade before smelting: crushing and grinding to free (liberate) ore minerals, then separation by physical properties.
| Separation | Property used | Examples |
|---|---|---|
| Gravity (jigs, spirals, shaking tables) | density | heavy minerals of beach sands, gold, cassiterite, chromite |
| Magnetic | magnetic susceptibility | magnetite, ilmenite, garnet |
| Electrostatic (high-tension) | electrical conductivity | separates conducting ilmenite and rutile from non-conducting zircon and monazite |
| Froth flotation | surface hydrophobicity (made selective by collector chemicals) | sulphide ores of Cu, Pb, Zn |
| Leaching (hydrometallurgy) | solubility | gold by cyanide; copper by sulphuric acid; bauxite by NaOH (Bayer process, leaving red mud) |
Mass balance
For feed grade \( f \), concentrate grade \( c \) and tailings grade \( t \), the two-product formula gives
$$\boxed{\frac{C}{F} = \frac{f - t}{c - t}} \qquad \boxed{\text{Recovery} = \frac{c\,(f - t)}{f\,(c - t)}}$$Environmental Impact of Mining
| Impact | Cause |
|---|---|
| Land degradation and deforestation | opencast pits, overburden dumps, roads |
| Acid mine drainage (AMD) | oxidation of pyrite and other sulphides in waste and workings |
| Heavy-metal contamination | As, Cd, Pb, Hg, Zn released from sulphides, tailings and processing (cyanide, mercury in artisanal gold mining) |
| Tailings dam failure | liquefaction or overtopping of slurry dams (catastrophic failures in Brazil in 2015 and 2019 are cited worldwide) |
| Groundwater lowering | mine dewatering |
| Subsidence | collapse over underground workings |
| Dust and air pollution | blasting, haulage, crushing; silicosis in workers |
| Noise and vibration | blasting |
| Social impact | displacement, loss of forest livelihoods |
| Radiological | uranium tailings (radon, radium) |
Acid mine drainage chemistry
$$\text{FeS}_2 + \tfrac{7}{2}\text{O}_2 + \text{H}_2\text{O} \rightarrow \text{Fe}^{2+} + 2\text{SO}_4^{2-} + 2\text{H}^+$$$$\text{Fe}^{2+} + \tfrac{1}{4}\text{O}_2 + \text{H}^+ \rightarrow \text{Fe}^{3+} + \tfrac{1}{2}\text{H}_2\text{O} \quad \text{(rate-limiting; bacterially catalysed at low pH)}$$$$\text{FeS}_2 + 14\,\text{Fe}^{3+} + 8\,\text{H}_2\text{O} \rightarrow 15\,\text{Fe}^{2+} + 2\text{SO}_4^{2-} + 16\,\text{H}^+$$$$\text{Fe}^{3+} + 3\text{H}_2\text{O} \rightarrow \text{Fe(OH)}_3\downarrow + 3\text{H}^+ \quad \text{("yellow boy")}$$Overall: \( \text{FeS}_2 + \tfrac{15}{4}\text{O}_2 + \tfrac{7}{2}\text{H}_2\text{O} \rightarrow \text{Fe(OH)}_3 + 2\text{SO}_4^{2-} + 4\text{H}^+ \): each pyrite produces the equivalent of two H\(_2\)SO\(_4\). Iron-oxidising bacteria (such as Acidithiobacillus ferrooxidans) speed the ferrous-to-ferric step by orders of magnitude, so once acid conditions develop the reaction becomes self-sustaining. Low pH then dissolves heavy metals.
Acid–base accounting (ABA) predicts whether waste rock will generate acid:
$$\text{MPA (kg CaCO}_3\text{ t}^{-1}) = 31.25\times\%\text{S} \qquad \text{NNP} = \text{NP} - \text{MPA} \qquad \text{NPR} = \text{NP}/\text{MPA}$$where MPA is the maximum potential acidity and NP the neutralisation potential (from carbonates). The factor 31.25 comes from 1% S per tonne = 10 kg S = 0.3125 kmol (with S = 32), each needing one mole of CaCO\(_3\) (100 g mol\(^{-1}\)). Commonly used screening: NPR below 1 (or NNP below about \( -20 \)) is likely acid-generating; NPR above about 2 is unlikely; in between is uncertain and needs kinetic testing.
Control and remediation: keep sulphides away from oxygen and water (submerge, cover, seal), blend with limestone, divert clean water, treat drainage with lime (active treatment), or with anoxic limestone drains and constructed wetlands (passive treatment).
Reclamation
Progressive backfilling of pits, saving and replacing topsoil, contouring dumps, revegetation with native species, phytoremediation and metal-tolerant plants, conversion of pits to water bodies, and a mine closure plan with financial assurance before mining begins.
Conservation of Mineral Resources
Minerals are non-renewable on human time scales; conservation means using them more slowly and more completely.
| Approach | Examples |
|---|---|
| Reduce | lighter designs, longer-lasting products |
| Reuse and recycle | scrap steel, aluminium cans (recycled aluminium needs only a small fraction of the energy of primary metal), copper wire, lead batteries; urban mining of e-waste for gold, copper and rare earths |
| Substitution | optical fibre for copper cable, plastics and composites for metals, LED for mercury lamps |
| Better extraction | higher recovery, selective mining, reprocessing old tailings, recovering by-products (Cd and In from zinc, Se and Te from copper, Ga from bauxite) |
| Waste utilisation | fly ash in cement and bricks, red mud, slag in roads |
| Exploration and technology | new deposits, deeper and lower-grade ores, offshore resources (polymetallic nodules) |
| Policy | stockpiles of strategic minerals, efficient allocation, sustainable mining codes |
Indian framework. The Mines and Minerals (Development and Regulation) Act, 1957 is the main law. Its 2015 amendment made auction the route for granting mineral concessions and created District Mineral Foundations (funds for people in mining-affected areas) and the National Mineral Exploration Trust. The National Mineral Policy, 2019 sets the policy direction. In 2023 India identified a list of critical minerals (including lithium, cobalt, graphite and rare earth elements) needed for clean energy and electronics.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Resource: all known plus estimated, economic or not | Reserve: identified and profitable now | |
| Grade: concentration in ore | Recovery: fraction of metal captured by processing | |
| Ore mineral (chalcopyrite) | Gangue (quartz, calcite) | |
| Residual deposit: leftover after weathering (bauxite) | Supergene enrichment: leached then re-precipitated below (Cu blanket) | |
| Placer: mechanical concentration | Chemical sedimentary: precipitation (BIF, phosphorite) | |
| Static lifetime: \( R/P \) | Exponential lifetime: \( \frac{1}{r}\ln(1 + rR/P) \) | |
| Magnetic survey: magnetite, kimberlite | IP survey: disseminated sulphides |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- Define a mineral reserve.
- Name the process that forms bauxite.
- Which geophysical method is most suited to detecting disseminated sulphides?
Answers
- The part of an identified mineral resource that can be extracted profitably under current economic and technological conditions.
- Residual weathering (laterisation) in a hot, humid climate.
- Induced polarisation (IP).
Level 2: Part B Style
Practice Q1. Taking the average crustal abundance of copper as 60 ppm and the minimum economic ore grade as 0.6% Cu, the concentration factor is:
(a) 10 (b) 100 (c) 1,000 (d) 10,000
Answer: (b) 100
60 ppm = 0.006%. \( 0.6/0.006 = 100 \). The distractors come from unit slips: treating ppm as \( 10^{-5} \) gives 10 (a); treating it as \( 10^{-7} \) or \( 10^{-8} \) gives 1,000 (c) or 10,000 (d), instead of \( 10^{-6} \).
Practice Q2. Ilmenite, rutile, zircon, monazite and garnet in the beach sands of Kerala form a deposit of which type?
(a) Residual (b) Placer (c) Hydrothermal (d) Supergene
Answer: (b) Placer
They are dense, chemically and mechanically resistant minerals concentrated by waves and currents.
Practice Q3. In the McKelvey classification, a deposit that has been drilled and measured but cannot be mined at a profit at current prices is a:
(a) reserve (b) sub-economic (or marginal) identified resource (c) hypothetical resource (d) speculative resource
Answer: (b)
It is identified (geologically certain) but not economic. Hypothetical and speculative resources are undiscovered.
Practice Q4. A copper mine’s costs are ₹1,500 per tonne of ore, recovery is 90% and copper sells at ₹6,00,000 per tonne. The break-even cut-off grade is closest to:
(a) 0.25% Cu (b) 0.28% Cu (c) 0.36% Cu (d) 2.8% Cu
Answer: (b) 0.28% Cu
\( g_c = 1500/(600000\times 0.9) = 0.00278 = 0.278\% \). (a) ignores recovery; (d) is off by a factor of ten.
Level 3: Part C Style
Practice Q5. Acid–base accounting on three waste-rock samples:
| Sample | Total S (%) | NP (kg CaCO\(_3\) t\(^{-1}\)) |
|---|---|---|
| P | 0.5 | 40 |
| Q | 2.0 | 25 |
| R | 1.2 | 45 |
Using MPA = 31.25 × %S and the screening rule (NPR below 1 likely acid-generating, above 2 unlikely, 1–2 uncertain), which statement is correct?
(a) Only P is likely to generate acid (b) Q is likely acid-generating, P is unlikely, R is uncertain (c) All three are unlikely to generate acid because each has positive NP (d) R is the most acid-generating because it has the highest NP
Answer: (b)
| Sample | MPA | NNP = NP − MPA | NPR = NP/MPA |
|---|---|---|---|
| P | 15.6 | +24.4 | 2.56 (unlikely) |
| Q | 62.5 | −37.5 | 0.40 (likely acid) |
| R | 37.5 | +7.5 | 1.20 (uncertain) |
What matters is the balance between acid potential and neutralising potential, not NP alone. R needs kinetic (column) testing.
Practice Q6. A lead–zinc concentrator treats ore with feed grade 1.2% Zn and produces a concentrate of 24% Zn and tailings of 0.12% Zn. Which statements are correct?
- About 45 kg of concentrate is produced per tonne of ore.
- The zinc recovery is about 90%.
- The enrichment ratio is 20.
- The recovery is \( c/f = 20 \) per cent.
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
\( C/F = (1.2 - 0.12)/(24 - 0.12) = 0.0452 \) → 45.2 kg t\(^{-1}\) (statement 1 true).
Recovery \( = 24\times 1.08/(1.2\times 23.88) = 0.905 \) (statement 2 true).
Enrichment ratio \( c/f = 24/1.2 = 20 \) (statement 3 true); statement 4 confuses enrichment ratio with recovery.
Practice Q7. A country has an iron-ore reserve of 800 Mt and produces 20 Mt per year. Which pair gives the static lifetime and the lifetime if production grows by 3% per year?
(a) 40 yr and 26 yr (b) 40 yr and 40 yr (c) 40 yr and 53 yr (d) 26 yr and 40 yr
Answer: (a)
Static: \( 800/20 = 40 \) yr.
Exponential: \( T = \frac{1}{0.03}\ln(1 + 0.03\times 40) = \frac{\ln 2.2}{0.03} = \frac{0.788}{0.03} \approx 26.3 \) yr.
Growth always shortens the lifetime, so (c) is impossible; (d) reverses the two.
Quick Revision Table
| Idea | Fact or formula |
|---|---|
| Ore | mineral material extractable at a profit; ore mineral + gangue |
| Concentration factor | ore grade / crustal average (Al about 4, Fe about 12, Cu about 100, Au about 1,000) |
| Resource vs reserve | McKelvey: certainty (measured, indicated, inferred; undiscovered) × economics |
| India | UNFC classification; MMDR Act 1957 (2015: auctions, DMF, NMET); National Mineral Policy 2019; critical minerals list 2023 |
| Lifetime | static \( R/P \); exponential \( \frac{1}{r}\ln(1 + rR/P) \) |
| Hubbert | bell curve; peak near half of ultimate recovery |
| Ore processes | magmatic, pegmatitic, hydrothermal, SEDEX, VMS, chemical sedimentary, residual, supergene, placer, metamorphic |
| Indian examples | chromite Sukinda; Cu Malanjkhand, Khetri; Pb–Zn Zawar, Rampura–Agucha; Fe Bailadila, Singhbhum–Keonjhar, Bellary; bauxite Panchpatmali; Au Kolar, Hutti; placers Chavara; diamond Panna |
| Exploration | magnetic (magnetite), gravity (dense ores), EM (massive sulphide), IP (disseminated sulphide), radiometric (U, Th, K) |
| Stripping ratio | waste / ore; BESR = (ore value − ore cost)/waste cost |
| Cut-off grade | cost / (price × recovery) |
| Two-product | \( C/F = (f - t)/(c - t) \); recovery \( = c(f - t)/[f(c - t)] \) |
| AMD | FeS\(_2\) → 2 H\(_2\)SO\(_4\) equivalent; Fe\(^{2+}\) → Fe\(^{3+}\) rate-limiting, bacteria catalyse |
| ABA | MPA = 31.25 × %S; NPR < 1 acid likely, > 2 unlikely |
| Conservation | reduce, reuse, recycle, substitute, recover by-products, reprocess tailings |
Key Takeaways
What’s Next
- Natural Hazards: including mining-induced subsidence and tailings-dam failures in context.
- Remote Sensing: alteration mapping and mine monitoring from space.
- Soil Chemistry, Toxic Organics and Pollution Monitoring: heavy metals in soils and water.
- Back to the chapter overview.