Gravity and Magnetic Methods
CSIR NET Earth Sciences Part C geophysics: gravimeters, magnetometers, corrections, regional-residual separation, continuation, simple bodies and inversion.
- 4
- Topics
- 85
- Min read
- 01 Gravimeters, Magnetometers and Data AcquisitionStart here Absolute and relative gravimeters, zero-length springs, fluxgate, proton, Overhauser and optically pumped magnetometers, and survey design for CSIR NET.
- 02 Corrections and Regional–Residual Separation Gravity drift, tide, latitude, free-air, Bouguer and terrain corrections, density by Nettleton and Parasnis, magnetic reductions and regional-residual separation.
- 03 Continuation, Derivatives and Frequency-Domain Methods Upward and downward continuation, vertical and horizontal derivatives, analytic signal, tilt, reduction to pole and spectral depths for CSIR NET geophysics.
- 04 Interpretation of Simple Bodies, Forward Modelling and Inversion Gravity and magnetic anomalies of spheres, cylinders, slabs and dykes, depth rules, Gauss excess mass, Euler deconvolution, Talwani modelling and inversion.
- Gravity and Magnetic Methods Short Notes Revise The whole chapter on one page.
Chapter Overview
Gravity and Magnetic Methods is the exploration unit of the Geophysics section of Part C in CSIR NET Earth, Atmospheric, Ocean and Planetary Sciences (subject code 702). It is about potential-field surveys: measuring tiny variations in gravity and in the Earth’s magnetic field, removing everything that is not geology, and reading the result as density and magnetisation structure below the surface. The same methods find ore bodies and salt domes, map sedimentary basins and basement faults, trace dykes across a craton, and delineate the Deccan Traps or a buried rift.
The unit pairs naturally with two others. Signal processing supplies the tools (Fourier transforms, filters, sampling), and Field Theory (the Newtonian potential) supplies the physics (Laplace’s equation, Green’s theorem, the equivalent layer). This chapter applies both to real survey data: instruments and field practice, reductions, enhancement in the space and wavenumber domains, and interpretation from rules of thumb to full inversion. Questions mix recognition, one-step numericals (corrections, half-width depths, continuation factors, spectral slopes) and statement evaluation.
What You’ll Learn
By the end of this chapter you will be able to:
- Explain how absolute and relative gravimeters work, why astatic zero-length-spring instruments are sensitive, and how drift and tares are controlled
- Compare fluxgate, proton precession, Overhauser and optically pumped magnetometers, and compute precession frequencies
- Plan ground, marine and airborne surveys: base ties, loops, station and line spacing, diurnal monitoring, Eötvös correction
- Reduce gravity data (drift, tide, latitude, free-air, Bouguer, terrain) and choose a Bouguer density by Nettleton and Parasnis; reduce magnetic data with diurnal and IGRF corrections
- Separate regional and residual anomalies by smoothing, averaging, trend surfaces, filtering and upward continuation
- Apply continuation, derivatives, analytic signal, tilt, reduction to the pole and pseudo-gravity, and estimate depth from the power spectrum
- Interpret spheres, cylinders, slabs and dykes, use half-width and limiting-depth rules, Gauss’s theorem and Euler deconvolution
- Describe Talwani and Parker forward modelling, and linear, nonlinear and regularised inversion with their non-uniqueness
Prerequisites
- The Part B page Gravity, Geomagnetism, Heat Flow and Isostasy: units, normal gravity, simple anomalies, the dipole field
- The Part C unit Signal Processing: Fourier transforms, sampling, filters and least squares
- The Part C units Gravity and Magnetic Fields of the Earth (anomalies, the geomagnetic field) and Numerical Analysis and Inversion (least squares, regularisation, SVD)
- BSc electromagnetism and mathematical physics: potentials, Laplace’s equation, dipoles (see Fourier Series, Fourier and Laplace Transforms in Physical Sciences)
Learning Path
The topics follow the order of the official syllabus lines:
graph TD
A["1. Gravimeters, Magnetometers
and Data Acquisition"] --> B["2. Corrections and
Regional–Residual Separation"]
B --> C["3. Continuation, Derivatives and
Frequency-Domain Methods"]
B --> D["4. Interpretation of Simple Bodies,
Forward Modelling and Inversion"]
C --> D
D --> E["Quick Revision"]Topics in This Chapter
| Topic | What it covers | Time |
|---|---|---|
| Gravimeters, Magnetometers and Data Acquisition | free-fall and pendulum measurement, stable and astatic gravimeters, zero-length spring, drift and tares, superconducting and gradiometer instruments, marine and airborne gravity, Eötvös effect, fluxgate, proton precession, Overhauser, optically pumped and SQUID magnetometers, total-field anomaly, base networks and loops, height and position accuracy, station and line spacing, diurnal monitoring, aeromagnetic survey parameters | 30 min |
| Corrections and Regional–Residual Separation | drift, tide, latitude, free-air, Bouguer, terrain and isostatic corrections, marine Bouguer, anomaly types, Nettleton and Parasnis density methods, diurnal and IGRF magnetic reduction, graphical, moving-average, Griffin, trend-surface, filtering and continuation separation | 30 min |
| Continuation, Derivatives and Frequency-Domain Methods | harmonic fields, Poisson integral, upward and downward continuation, equivalent sources, vertical and horizontal derivatives, 2VD on a grid, horizontal gradient, analytic signal, tilt, reduction to the pole, pseudo-gravity, radially averaged power spectrum, spectral depth and Curie depth, wavenumber filters, FFT cautions | 35 min |
| Interpretation of Simple Bodies, Forward Modelling and Inversion | non-uniqueness, Gauss’s excess mass, sphere, cylinder, slab and fault formulas, half-width and Smith rules, magnetic dipole and monopole, latitude dependence, Koenigsberger ratio, Euler deconvolution and structural index, Talwani polygons, Parker’s method, linear and regularised inversion, depth weighting, Bott’s basin method | 35 min |
| Quick Revision | every formula, number and trap on one page | 10 min |
Official Syllabus Lines and Where They Are Covered
| Official topic line | Covered in |
|---|---|
| Gravimeters and magnetometers, data acquisition | Gravimeters, Magnetometers and Data Acquisition |
| Corrections, regional-residual separation | Corrections and Regional–Residual Separation; upward continuation as a regional also in Continuation, Derivatives and Frequency-Domain Methods |
| Continuation and derivatives | Continuation, Derivatives and Frequency-Domain Methods |
| Interpretation of simple bodies | Interpretation of Simple Bodies, Forward Modelling and Inversion |
| Forward modelling, inversion, frequency-domain interpretation | forward modelling and inversion in Interpretation of Simple Bodies, Forward Modelling and Inversion (including Parker’s wavenumber-domain method); spectral depth, RTP and wavenumber filters in Continuation, Derivatives and Frequency-Domain Methods |
How CSIR NET Asks It
Per the NTA information bulletin for December 2026, Earth Sciences Part C has 80 questions, of which 25 are to be attempted, at 4 marks each with −1.32 for a wrong answer, a maximum of 100 marks (full table on the Earth Sciences overview). If more than 25 Part C questions are answered, only the first 25 answered are evaluated. There is no official count of questions per unit. From the syllabus wording, expect these kinds of question:
| Question type | Typical content | Where to practise |
|---|---|---|
| Recognition | which instrument is a vector or total-field sensor, what an astatic gravimeter is, sign of each correction, what a derivative or RTP map does, structural index of a body | Level 1 and 2 on each page |
| One-step numerical | free-air and Bouguer corrections, terrain sector, Eötvös correction, precession frequency, continuation factor, spectral slope to depth, half-width to depth, Smith bound | Level 2 |
| Multi-step numerical | drift loop reduction, Parasnis density, excess mass and tonnage, magnetic sphere anomaly, Bott iteration, two-segment spectrum with flight height | Level 3 |
| Statement evaluation | survey design, regional–residual methods, stability of continuation, anomaly shape with latitude, non-uniqueness and regularisation | Level 3 |
Quick Reference
| Quantity | Value or formula |
|---|---|
| Units | 1 mGal = \( 10^{-5} \) m s\(^{-2}\); 1 nT = \( 10^{-9} \) T; 1 E = \( 10^{-9} \) s\(^{-2}\) |
| Free-air | \( 0.3086h \) mGal (add above datum) |
| Bouguer slab | \( 2\pi G\rho h = 0.04193\rho h \) mGal (subtract above datum) |
| Terrain | always added on land |
| Proton precession | \( f = 0.042577B \) (Hz, nT) |
| Eötvös | \( 7.503V\cos\phi\sin\alpha + 0.004154V^2 \) mGal (knots) |
| Continuation | up \( e^{-\lvert k\rvert h} \), down \( e^{+\lvert k\rvert h} \) |
| Spectral depth | \( \ln P = C - 2hk \) |
| Sphere / cylinder depth | \( z = 1.305x_{1/2} \) / \( z = x_{1/2} \) |
| Smith | \( z \le 0.86A/A' \) (3D), \( 0.65A/A' \) (2D) |
| Excess mass | \( M_e = \iint\Delta g\,dA/2\pi G \) |
| Euler | \( (\mathbf{r} - \mathbf{r}_0)\cdot\nabla T = N(B - T) \) |
Start Learning
Begin with the first topic: