Oceanic Sediments, Diagenesis and Marine Mineral Resources
CSIR NET Earth Sciences Part C: sediment types, CCD and lysocline, plate stratigraphy, early and burial diagenesis, nodules, crusts, sulphides, placers, UNCLOS.
- 22 min
On this page · 15 sections
- Prerequisites
- The Hook: What the Challenger Dredged
- Classifying Marine Sediments
- Controls on Biogenic Sediments: Production, Dissolution, Dilution
- Other Sediment Types
- Dating and Accumulation Rates
- Diagenesis
- Marine Mineral Resources
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- The four basic sediment types and the CCD in outline from Ocean Floor, Sea Water and Residence Times.
- Productivity and upwelling from Ocean Circulation for Part C.
- Depth–age subsidence and hydrothermal vents from Ocean-Floor Morphology, Oceanic Crust and Hydrothermal Vents.
- Radioactive decay and half-lives from Nuclear Stability and Radioactive Decay, for \(^{210}\)Pb dating.
- The carbonate system in water from Aquatic Chemistry and Water Quality.
The Hook: What the Challenger Dredged
Classifying Marine Sediments
By origin
| Class | Source | Main components | Typical setting |
|---|---|---|---|
| Lithogenous (terrigenous) | weathering of continents; rivers, wind, ice | quartz, feldspar, clays, rock fragments; volcanic ash | margins, fans, abyssal plains; aeolian dust far offshore |
| Biogenous | skeletons of plankton | calcite (foraminifera, coccoliths), aragonite (pteropods), opal (diatoms, radiolarians, silicoflagellates) | above the CCD (carbonate); under high-productivity belts (opal) |
| Hydrogenous (authigenic) | precipitation from sea water or pore water | Fe–Mn oxides, phosphorites, glauconite, zeolites, barite, evaporites, metalliferous sediments | slow-sedimentation areas; upwelling margins; near ridges |
| Cosmogenous | extraterrestrial | micrometeorites, cosmic spherules, tektites | everywhere, always a tiny fraction |
Ooze is a pelagic sediment with at least 30% biogenous skeletal material, named after the dominant organism: foraminiferal (Globigerina) ooze, nannofossil (coccolith) ooze, pteropod ooze, diatom ooze, radiolarian ooze.
By setting
| Neritic | Hemipelagic | Pelagic | |
|---|---|---|---|
| Where | shelf | slope and rise near continents | open ocean far from land |
| Grain source | terrigenous, coarse | mix of fine terrigenous and biogenic | biogenic oozes and pelagic (red/brown) clay |
| Accumulation rate | cm yr\(^{-1}\) to mm yr\(^{-1}\) | tens of cm kyr\(^{-1}\) | oozes about 1–5 cm kyr\(^{-1}\); clay about 0.1–1 mm kyr\(^{-1}\) |
On the deep-sea floor, calcareous ooze covers roughly half the area, pelagic clay over a third, and siliceous ooze most of the rest. These shares vary between compilations.
Clay minerals as climate indicators
| Clay mineral | Formed by | Where it is concentrated in marine sediments |
|---|---|---|
| Kaolinite | intense chemical weathering in warm, humid climates | low latitudes, off tropical rivers and arid African coasts (dust) |
| Chlorite | physical weathering of metamorphic and igneous rocks | high latitudes (and Himalayan-derived sediment) |
| Illite | weathering of micas; moderate climates | most abundant overall; mid–high latitudes, northern hemisphere |
| Smectite | alteration of volcanic glass and basalt; also soils | South Pacific, near volcanic sources; Arabian Sea (from Deccan basalt soils) |
| Palygorskite | arid, evaporative soils | Arabian Sea and off North Africa, carried as dust |
Because they reflect source weathering, clay assemblages in cores are used as proxies for past monsoon strength (smectite and kaolinite rise with chemical weathering; illite and chlorite with physical erosion).
Controls on Biogenic Sediments: Production, Dissolution, Dilution
What reaches the sea floor depends on three things:
- Production in surface waters (high in upwelling zones and the equatorial belt).
- Dissolution in the water column and at the sea floor.
- Dilution by other components (terrigenous input near land).
Carbonate: lysocline and CCD
Deep water is undersaturated with respect to calcite and aragonite below a certain depth, because solubility rises with pressure, with lower temperature, and with higher CO\(_2\) (older deep water has accumulated respiration CO\(_2\)). The saturation state is
$$\Omega = \frac{[\text{Ca}^{2+}][\text{CO}_3^{2-}]}{K'_{sp}}$$| Surface | Definition | Typical depth |
|---|---|---|
| Saturation horizon | \( \Omega = 1 \) | shallower than the lysocline |
| Lysocline | depth where dissolution becomes noticeable in the sediment (foram preservation drops sharply) | a few hundred m to about 1 km above the CCD |
| Carbonate compensation depth (CCD) | rate of carbonate supply = rate of dissolution; below it, almost no CaCO\(_3\) accumulates | about 4.2–5 km in the Pacific (deepest under the equatorial belt); about 5 km or more in the Atlantic |
| Aragonite compensation depth (ACD) | the same for aragonite | much shallower (aragonite is more soluble): pteropod oozes occur only on shallow highs |
Why the Atlantic CCD is deeper: Atlantic deep water is young (recently ventilated NADW) with less respired CO\(_2\) and higher \( [\text{CO}_3^{2-}] \). Pacific deep water is old and corrosive. The CCD is also deeper under high-productivity belts, where the larger supply of carbonate outpaces dissolution.
Through time: the CCD deepened by roughly a kilometre in the Pacific at the Eocene–Oligocene transition (about 34 Ma), together with the onset of large Antarctic ice sheets. It shoaled dramatically during the Paleocene–Eocene Thermal Maximum (about 56 Ma), when a large carbon release acidified the ocean: carbonate-rich sediments in many cores pass abruptly into a dissolution clay layer.
Opal
The whole ocean is undersaturated in silica, so opal dissolves everywhere; only a small fraction of produced opal is buried. Opal therefore accumulates only where production is very high or burial fast:
- the Southern Ocean diatom belt, south of the Polar Front (the largest opal sink),
- the equatorial Pacific (radiolarians and diatoms),
- the North Pacific and coastal upwelling zones.
Because opal survives below the CCD, siliceous ooze dominates where carbonate has dissolved under productive water, as in the deep equatorial Pacific.
Plate stratigraphy: a site moving through the system
A site on the ocean floor moves away from the ridge, subsides with age and may travel across productivity belts. Its sediment column records that journey (the concept of Berger and Winterer in the 1970s):
graph TD
A[Top: pelagic red clay - site now below CCD, far from productive belts] --> B[Siliceous ooze - site crossed equatorial high-productivity belt below CCD]
B --> C[Calcareous ooze - site above CCD while young and shallow]
C --> D[Metalliferous Fe-Mn sediment - hydrothermal fallout at the ridge crest]
D --> E[Base: oceanic basalt]Other Sediment Types
| Type | Key features |
|---|---|
| Turbidites | graded beds with Bouma divisions; fill abyssal plains (see Ocean Margins and Tectonic Evolution of Ocean Basins) |
| Contourites | along-slope bottom-current deposits forming drifts on the rise |
| Glaciomarine sediment | ice-rafted debris (IRD): sand and gravel dropped from icebergs into fine mud; layers of IRD in the North Atlantic are Heinrich layers |
| Aeolian dust | fine quartz, clays, palygorskite; strong off the Sahara and Arabia; records aridity and wind strength |
| Volcanogenic | ash layers (tephra) used as time markers; altered to smectite and zeolites |
| Pelagic clay | slowest-accumulating sediment; enriched in authigenic Fe–Mn oxides, zeolites (phillipsite), fish teeth, cosmic spherules |
Dating and Accumulation Rates
| Method | Range | Notes |
|---|---|---|
| \(^{210}\)Pb (excess) | about the last 100–150 yr | half-life 22.3 yr; recent shelf and lake sediments |
| \(^{14}\)C | up to about 50 kyr | forams or organic carbon; needs a marine reservoir correction |
| \(^{230}\)Th excess, \(^{231}\)Pa excess | up to a few hundred kyr | also used to normalise fluxes |
| Biostratigraphy | whole Cenozoic and Mesozoic | forams, nannofossils, radiolarians, diatoms |
| Magnetostratigraphy | whole ocean-floor record | polarity reversals, tied to the time scale |
| Oxygen-isotope stratigraphy and orbital tuning | Cenozoic | matching to the LR04 benthic stack (see the proxies page) |
Linear sedimentation rate (LSR) is thickness per time (cm kyr\(^{-1}\)). To compare fluxes it must be converted to mass accumulation rate (MAR):
$$\boxed{\text{MAR} = \text{LSR}\times\text{DBD}}, \qquad \text{DBD} = \rho_s(1 - \phi)$$where DBD is dry bulk density, \( \rho_s \) the grain density and \( \phi \) the porosity. The MAR of a component is MAR × its weight fraction.
Diagenesis
Early diagenesis: the redox ladder
Bacteria oxidise buried organic matter using the oxidant that yields the most free energy, and move to the next only when it is used up. Pore waters therefore show a vertical redox zonation (formalised by Froelich and colleagues in 1979):
| Zone (top to bottom) | Reaction (simplified) | Pore-water signal |
|---|---|---|
| Oxic | O\(_2\) respiration | O\(_2\) falls; nitrate rises (nitrification) |
| Nitrate reduction (denitrification) | NO\(_3^-\) → N\(_2\) | nitrate falls |
| Mn(IV) reduction | MnO\(_2\) → Mn\(^{2+}\) | dissolved Mn\(^{2+}\) appears |
| Fe(III) reduction | Fe oxides → Fe\(^{2+}\) | dissolved Fe\(^{2+}\) appears |
| Sulfate reduction | SO\(_4^{2-}\) → H\(_2\)S | sulfate falls, sulfide and alkalinity rise; pyrite forms |
| Methanogenesis | CO\(_2\) reduction or fermentation → CH\(_4\) | methane accumulates below the sulfate zone |
The zones are thin and shallow (mm to cm) on productive margins with fast burial, and stretched over metres in slowly accumulating pelagic sediments, where oxygen can penetrate deep.
The sulfate–methane transition zone (SMTZ): methane diffusing up meets sulfate diffusing down, and microbial consortia carry out anaerobic oxidation of methane (AOM):
$$\text{CH}_4 + \text{SO}_4^{2-} \rightarrow \text{HCO}_3^- + \text{HS}^- + \text{H}_2\text{O}$$AOM consumes most of the methane produced in marine sediments before it reaches the water. The depth of the SMTZ reflects the upward methane flux: a shallow SMTZ means a strong flux, often above gas hydrates.
Diffusive flux across a pore-water gradient follows Fick’s first law:
$$\boxed{J = -\phi D_s\frac{dC}{dz}}$$where \( D_s \) is the sediment diffusion coefficient (the free-solution value reduced by tortuosity).
Authigenic minerals of early diagenesis
| Mineral | Setting | Significance |
|---|---|---|
| Pyrite (often framboidal) | sulfate-reduction zone; needs reactive Fe and H\(_2\)S | main sulfur sink; marks anoxic pore waters |
| Carbonate fluorapatite (francolite) | organic-rich muds under upwelling (Peru, Namibia, Arabian Sea margins) | phosphorite formation |
| Glauconite | shelf, slow sedimentation, mildly reducing micro-environments (inside forams, faecal pellets) | marks condensed sections and transgressive surfaces |
| Authigenic carbonates (calcite, aragonite, dolomite) | SMTZ and methane seeps (AOM raises alkalinity) | seep carbonates with very negative \( \delta^{13}\text{C} \) |
| Zeolites (phillipsite, clinoptilolite) | alteration of volcanic glass | common in Pacific pelagic clays and older siliceous sediment |
| Barite | water-column micro-environments around decaying organic matter | excess Ba as a paleoproductivity proxy |
| Diagenetic Mn oxides | Mn\(^{2+}\) diffusing up and re-oxidised at the oxic boundary | diagenetic nodule growth |
Gas hydrates
Gas hydrates (clathrates) are ice-like solids in which water molecules cage methane. They are stable at high pressure and low temperature: in marine sediments, below roughly 300–500 m water depth, down to a depth in the sediment where the geothermal gradient makes them unstable. The base of the gas hydrate stability zone shows up on seismic sections as a bottom-simulating reflector (BSR): it follows the shape of the sea floor (an isotherm surface), cuts across strata, and has reversed polarity (hydrate-bearing sediment above, free gas below).
India’s National Gas Hydrate Program has drilled hydrates on the eastern margin, notably in the Krishna–Godavari Basin, with expeditions also in the Mahanadi Basin and off the Andaman Islands. Hydrates matter as a potential energy resource, as a geohazard (slope failure when they dissociate) and for climate (methane release).
Burial diagenesis
| Process | What happens |
|---|---|
| Compaction | porosity falls with depth, roughly exponentially (Athy’s law, \( \phi = \phi_0 e^{-z/z_0} \)); pore water is expelled |
| Calcareous ooze → chalk → limestone | dissolution of fine, unstable grains and reprecipitation as cement; pressure solution, stylolites |
| Opal-A → opal-CT → quartz | biogenic opal-A recrystallises with temperature and time to opal-CT (porcellanite) and then microquartz (chert); the opal-A/opal-CT transition is itself a seismic reflector |
| Smectite → illite | at roughly 60–120 °C, consuming K and releasing water and silica; contributes to overpressure |
| Dolomitisation | Mg-bearing fluids replace calcite |
| Organic maturation | kerogen → oil (oil window, about 60–120 °C) → gas; source rocks of offshore basins |
Marine Mineral Resources
Overview
| Resource | Setting | Metals or commodity | Indian context |
|---|---|---|---|
| Placer (heavy mineral) sands | beaches, nearshore, palaeo-shorelines on the shelf | ilmenite, rutile, zircon, monazite (Th, REE), sillimanite, garnet | Chavara (Kerala), Manavalakurichi (Tamil Nadu), Chhatrapur (Odisha), Andhra coast |
| Sand and gravel; calcareous sand; shell deposits | shelf | construction, cement, lime | used locally; mapped by shelf surveys |
| Phosphorites | upwelling shelves and slopes; seamount caps | phosphate | Peru, Namibia and other upwelling margins are the type settings |
| Polymetallic (manganese) nodules | abyssal plains, 4–6 km, slow sedimentation | Mn, Ni, Cu, Co (± Mo, REE) | Central Indian Ocean Basin contract area |
| Cobalt-rich ferromanganese crusts | flanks of seamounts, roughly 800–2,500 m | Co, Mn, Ni, Pt, Te, REE | exploration on Indian Ocean seamounts |
| Sea-floor massive sulfides | active and extinct vent fields on ridges and back-arcs | Cu, Zn, Pb, Au, Ag | Indian Ocean ridge contract area |
| Metalliferous muds | hot brine pools | Zn, Cu, Ag, Fe, Mn | Red Sea Atlantis II Deep is the classic example |
| Hydrocarbons | sedimentary basins on margins | oil and gas | Mumbai Offshore (Bombay High, found in 1974), Krishna–Godavari, Cauvery |
| Gas hydrates | continental slopes | methane | Krishna–Godavari, Mahanadi, Andaman |
| Dissolved resources | sea water | NaCl, Mg, Br, fresh water by desalination | salt pans of Gujarat and Tamil Nadu |
Polymetallic nodules
- Concentric layers of Fe–Mn oxyhydroxides around a nucleus (a shark tooth, rock fragment or older nodule fragment); typically a few cm across.
- Hydrogenetic growth (top surface, from sea water): slow, a few mm per Myr; vernadite (δ-MnO\(_2\)); Fe/Mn near 1; Co-rich.
- Diagenetic growth (bottom, from pore water in contact with sediment): faster; todorokite and buserite; high Mn/Fe; Ni- and Cu-rich.
- Best grades and abundance occur under moderately productive waters with a slow sedimentation rate: the Clarion–Clipperton Zone in the Pacific, the Peru Basin, and the Central Indian Ocean Basin.
Cobalt-rich crusts
Crusts are purely hydrogenetic pavements up to about 25 cm thick on bare rock surfaces of seamounts, where currents keep sediment off. They grow at a few mm per Myr and concentrate cobalt, tellurium and platinum from sea water by surface adsorption on Mn and Fe oxides. The best crusts lie just below the oxygen minimum zone in the central Pacific.
Sea-floor massive sulfides (SMS)
Sulfide mounds form where black smokers vent (see hydrothermal vents). Their ancient equivalents, volcanogenic massive sulfide (VMS) deposits, are major land sources of Cu and Zn: Cyprus-type (basalt-hosted, Cu-rich), Kuroko-type (felsic arc volcanics, Zn–Pb–Cu–Ba), and Besshi-type (mixed volcanic and sedimentary). Active vents are small; extinct, off-axis sulfide deposits are the realistic mining targets.
The legal framework
The UN Convention on the Law of the Sea (UNCLOS), adopted in 1982, defines maritime zones measured from the coastal baseline:
| Zone | Extent | Rights |
|---|---|---|
| Territorial sea | up to 12 nautical miles | full sovereignty (with innocent passage) |
| Contiguous zone | up to 24 nm | customs, immigration, pollution control |
| Exclusive Economic Zone (EEZ) | up to 200 nm | sovereign rights to living and non-living resources |
| Continental shelf | at least 200 nm; may extend to 350 nm, or 100 nm beyond the 2,500 m isobath, under Article 76 | sea-floor and subsoil resources |
| The Area | sea floor beyond national jurisdiction | “common heritage of mankind”; managed by the International Seabed Authority (ISA), Kingston, Jamaica |
India’s EEZ is about 2 million km\(^2\). India was the first country registered as a pioneer investor for nodules (1987) and now holds an ISA exploration contract in the Central Indian Ocean Basin, plus a contract for polymetallic sulfides along the Indian Ocean ridges. The Deep Ocean Mission (approved in 2021) includes a crewed submersible programme (Samudrayaan) and mining technology development.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Lysocline (dissolution starts to show) | CCD (accumulation stops) | |
| CCD (calcite) | ACD (aragonite, shallower) | |
| Linear sedimentation rate (cm kyr\(^{-1}\)) | Mass accumulation rate (g cm\(^{-2}\) kyr\(^{-1}\)) | |
| Hydrogenetic Fe–Mn (from sea water, slow, Co-rich) | Diagenetic Fe–Mn (from pore water, faster, Ni–Cu-rich) | |
| Nodules (abyssal plains, on sediment) | Crusts (seamount rock surfaces) | |
| Turbidite (downslope) | Contourite (along-slope) | |
| BSR (base of hydrate stability, cuts strata) | Ordinary reflector (follows bedding) | |
| EEZ (200 nm, all resources) | Extended continental shelf (sea-bed only, to 350 nm) |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- Which clay mineral is typical of low-latitude marine sediments?
- Name the reaction that consumes methane at the sulfate–methane transition zone.
- What is the outer limit of the Exclusive Economic Zone?
Answers
- Kaolinite.
- Anaerobic oxidation of methane (AOM) coupled to sulfate reduction.
- 200 nautical miles from the baseline.
Level 2: Part B Style
Practice Q1. A sediment has porosity 0.60, grain density 2.65 g cm\(^{-3}\) and a sedimentation rate of 3 cm kyr\(^{-1}\). Its mass accumulation rate is about:
(a) 1.06 g cm\(^{-2}\) kyr\(^{-1}\) (b) 3.18 g cm\(^{-2}\) kyr\(^{-1}\) (c) 4.77 g cm\(^{-2}\) kyr\(^{-1}\) (d) 7.95 g cm\(^{-2}\) kyr\(^{-1}\)
Answer: (b) 3.18
DBD \( = 2.65\times(1 - 0.60) = 1.06 \) g cm\(^{-3}\); MAR \( = 3\times 1.06 = 3.18 \). (c) uses porosity instead of \( 1 - \phi \) (\( 2.65\times 0.60\times 3 \)); (d) ignores porosity altogether (\( 2.65\times 3 \)); (a) is the DBD alone.
Practice Q2. Which order of oxidants used during early diagenesis is correct (first to last)?
(a) O\(_2\), SO\(_4^{2-}\), Fe(III), NO\(_3^-\) (b) O\(_2\), NO\(_3^-\), Mn(IV), Fe(III), SO\(_4^{2-}\) (c) NO\(_3^-\), O\(_2\), SO\(_4^{2-}\), Mn(IV) (d) SO\(_4^{2-}\), Fe(III), Mn(IV), O\(_2\)
Answer: (b)
The sequence follows decreasing free-energy yield per mole of organic carbon oxidised.
Practice Q3. A bottom-simulating reflector on a seismic section of a continental slope most likely marks:
(a) the top of oceanic basement (b) the base of the gas hydrate stability zone (c) a turbidite sand layer (d) the carbonate compensation depth
Answer: (b)
It mimics the sea-floor shape because it follows an isotherm, cuts across bedding, and has reversed polarity because of free gas below hydrate-bearing sediment.
Practice Q4. Which statement about ferromanganese deposits is correct?
(a) Diagenetic nodule layers are Co-rich and grow more slowly than hydrogenetic ones (b) Cobalt-rich crusts grow on sediment-covered abyssal plains (c) Hydrogenetic precipitation is slow, a few mm per Myr, and concentrates Co (d) Nodules are most abundant where sedimentation is fast
Answer: (c)
(a) reverses the two types; (b): crusts need bare rock on seamounts; (d): nodules need slow sedimentation.
Level 3: Part C Style
Practice Q5. A drill site lies on 70 Myr old sea floor. The ridge crest was at 2,500 m, depth follows \( d = 2500 + 350\sqrt{t} \) m, and the site has always been far from the equatorial belt. The cored section shows basalt overlain by 2 m of Fe–Mn-rich brown sediment, then nannofossil ooze, then pelagic clay at the top. Which statements are correct?
- If the CCD was constant at 4,200 m, the ooze-to-clay transition should be about 23.6 Myr younger than the basement, i.e. about 46 Ma.
- If the transition is instead found at 34 Ma, the CCD was deeper than 4,200 m at that time, or the site was shallower.
- The Fe–Mn-rich basal sediment is consistent with hydrothermal plume fallout at the ridge crest.
- The pelagic clay should accumulate faster than the ooze below it.
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- 1: \( 350\sqrt{t} = 1700 \Rightarrow t = 23.6 \) Myr after formation, so at \( 70 - 23.6 \approx 46 \) Ma. True.
- 2: carbonate persisted for longer than expected (until 34 Ma, when the crust was 36 Myr old and about 4,600 m deep). So the CCD must have been at least that deep then, deeper than 4,200 m, or local subsidence was less than the model. True.
- 3: metalliferous basal sediments are the classic ridge-crest hydrothermal deposit. True.
- 4: false. Pelagic clay accumulates far more slowly (fractions of a mm per kyr) than nannofossil ooze (cm per kyr).
Practice Q6. Pore-water profiles at a continental-slope site show: O\(_2\) zero below 1 cm; dissolved Mn\(^{2+}\) peaking at 3 cm; Fe\(^{2+}\) peaking at 8 cm; sulfate decreasing linearly from 28 mmol L\(^{-1}\) at the sea floor to zero at 4 m, with methane rising below 4 m. Take \( \phi = 0.75 \), \( D_s = 0.0158 \) m\(^2\) yr\(^{-1}\). Which statements are correct?
- The redox zones follow the expected energetic sequence.
- The sulfate flux into the SMTZ is about 0.083 mol m\(^{-2}\) yr\(^{-1}\).
- A shallower SMTZ at a nearby site would suggest a larger upward methane flux there.
- Authigenic carbonates with strongly negative \( \delta^{13}\text{C} \) might be found near 4 m.
(a) 1 and 2 only (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 2 and 4 only
Answer: (c) 1, 2, 3 and 4
- 1: oxic → Mn → Fe → sulfate → methane with depth. True.
- 2: \( J = 0.75\times 0.0158\times 28/4 = 0.083 \) mol m\(^{-2}\) yr\(^{-1}\). True.
- 3: sulfate is exhausted sooner when more methane comes up to meet it. True.
- 4: AOM releases bicarbonate carrying very light methane-derived carbon and raises alkalinity, precipitating isotopically light carbonate at the SMTZ. True.
Practice Q7. A nodule 4 cm across grew hydrogenetically at 5 mm per Myr on all sides from a tiny nucleus, while the surrounding clay accumulated at 1 mm per kyr. Which statements are correct?
- The nodule is about 4 Myr old.
- In that time about 4 m of clay accumulated around it.
- Its persistence at the surface requires some mechanism that keeps it from being buried.
- Its outer layers should be enriched in Ni and Cu relative to Co.
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- 1: radius 20 mm at 5 mm per Myr → 4 Myr. True.
- 2: \( 1\ \text{mm kyr}^{-1}\times 4000\ \text{kyr} = 4{,}000 \) mm = 4 m. True.
- 3: the nodule paradox. True.
- 4: false. Hydrogenetic growth is Co-rich; Ni and Cu enrichment characterises diagenetic growth.
Quick Revision Table
| Idea | Fact or formula |
|---|---|
| Sediment classes | lithogenous, biogenous, hydrogenous, cosmogenous; ooze ≥ 30% biogenic |
| Rates | pelagic clay 0.1–1 mm kyr\(^{-1}\); oozes 1–5 cm kyr\(^{-1}\); margins much faster |
| Clays | kaolinite low latitudes, chlorite high, illite widespread, smectite volcanic and Deccan, palygorskite arid |
| Carbonate | \( \Omega = [\text{Ca}^{2+}][\text{CO}_3^{2-}]/K'_{sp} \); saturation horizon → lysocline → CCD; ACD shallower |
| CCD | about 4.2–5 km Pacific, about 5 km or more Atlantic; deeper under productive belts; deepened at about 34 Ma; shoaled at PETM |
| Opal | undersaturated everywhere; Southern Ocean diatom belt, equatorial Pacific |
| Plate stratigraphy | basalt → metalliferous → carbonate → (siliceous) → clay |
| Accumulation | MAR = LSR × \( \rho_s(1 - \phi) \) |
| \(^{210}\)Pb | half-life 22.3 yr; last 100–150 yr |
| Redox ladder | O\(_2\), NO\(_3^-\), Mn(IV), Fe(III), SO\(_4^{2-}\), CH\(_4\) |
| SMTZ | AOM: CH\(_4\) + SO\(_4^{2-}\) → HCO\(_3^-\) + HS\(^-\) + H\(_2\)O |
| Fick | \( J = -\phi D_s\,dC/dz \) |
| Burial | compaction; ooze → chalk → limestone; opal-A → opal-CT → chert; smectite → illite |
| Gas hydrate | high P, low T; BSR; Krishna–Godavari |
| Nodules | hydrogenetic (Co, slow) vs diagenetic (Ni, Cu, faster); CCZ, CIOB |
| Crusts and sulfides | crusts on seamounts (Co, Pt, Te); SMS at vents (Cu, Zn, Au); VMS on land |
| Placers | ilmenite, rutile, zircon, monazite; Chavara, Manavalakurichi, Chhatrapur |
| UNCLOS | 12, 24, 200, 350 nm; ISA for the Area; India pioneer investor 1987 |
Key Takeaways
What’s Next
- Paleoceanographic Proxies and Paleo-SST Methods: turning these sediments into records of past temperature, ice volume and circulation.
- Mineral Deposits of India: land deposits, including beach placers.
- Energy Resources and Environmental Impact: hydrocarbons and gas hydrates as energy sources.
- Back to the chapter overview.